Skip to content

L
linux
Switch branch/tag
  1. 27 Sep, 2022 5 commits
  3. 22 Sep, 2022 7 commits
  5. 19 Sep, 2022 8 commits
  7. 15 Sep, 2022 14 commits
  9. 10 Sep, 2022 2 commits
  11. 09 Sep, 2022 4 commits
    • Vadim Pasternak's avatar
      platform/mellanox: mlxreg-lc: Make error handling flow consistent · 072aba58
      Vadim Pasternak authored 
      Use 'goto' statement in error flow of mlxreg_lc_event_handler() at all
places for consistency.

This follow-up patch implementing comments from
https://www.spinics.net/lists/platform-driver-x86/msg34587.htmlSigned-off-by: default avatarVadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220904141113.49048-1-vadimp@nvidia.comReviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      072aba58
    • Hans de Goede's avatar
      ACPI: video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native · c5b94f5b
      Hans de Goede authored 
      Some Toshibas have a broken acpi-video interface for brightness control
and need a special firmware call on resume to turn the panel back on.
So far these have been using the disable_backlight_sysfs_if workaround
to deal with this.

The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning
   acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs
   backlight interface to userspace.

After the refactor this breaks since the native driver will no
longer register its backlight-device if acpi_video_get_backlight_type()
does not return native and making it return native breaks 1.

Keeping the acpi_video backlight handling on resume active, while not
using it to set the brightness, is necessary because it does a _BCM
call on resume which is necessary to turn the panel back on on resume.

Looking at the DSDT shows that this _BCM call results in a Toshiba
HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.

This kind of special vendor specific handling really belongs in
the vendor specific acpi driver. An earlier patch in this series
modifies toshiba_acpi to make the necessary HCI_SET call on resume
on affected models.

With toshiba_acpi taking care of the HCI_SET call on resume,
the acpi_video code no longer needs to call _BCM on resume.

So instead of using the (now broken) disable_backlight_sysfs_if
workaround, simply setting acpi_backlight=native to disable
the broken apci-video interface is sufficient fix things now.

After this there are no more users of the disable_backlight_sysfs_if
flag and as discussed above the flag also no longer works as intended,
so remove the disable_backlight_sysfs_if flag entirely.
Acked-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: default avatarArvid Norlander <lkml@vorpal.se>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      c5b94f5b
    • Hans de Goede's avatar
      drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models · 3cb1f40d
      Hans de Goede authored 
      Some Toshibas have a broken acpi-video interface for brightness control, so
far these have been using a special workaround in drivers/acpi/acpi_video.c
which gets activated by the disable_backlight_sysfs_if module-param/quirks.

The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning
   acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs
   backlight interface to userspace.

After the refactor this breaks since the native driver will no
longer register its backlight-device if acpi_video_get_backlight_type()
does not return native and making it return native breaks 1.

Keeping the acpi_video backlight handling on resume active, while not
using it to set the brightness, is necessary because it does a _BCM
call on resume which is necessary to turn the panel back on on resume.

Looking at the DSDT shows that this _BCM call results in a Toshiba
HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.

This commit makes toshiba_acpi do a HCI_SET HCI_PANEL_POWER_ON call
on resume on the affected models, so that the (now broken)
acpi_video disable_backlight_sysfs_if workaround will no longer
be necessary.

Note this uses HCI_PANEL_POWER_ON instead of HCI_LCD_BRIGHTNESS
to avoid changing the configured brightness level.
Tested-by: default avatarArvid Norlander <lkml@vorpal.se>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      3cb1f40d
    • Arvid Norlander's avatar
      docs: ABI: charge_control_end_threshold may not support all values · 18ef1bb0
      Arvid Norlander authored 
      Some laptops (for example Toshiba Satellite Z830) only supports some fixed
values. Allow for this and document the expected behaviour in such cases.
Acked-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: default avatarArvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902180037.1728546-4-lkml@vorpal.seSigned-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      18ef1bb0
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7