- 14 May, 2017 40 commits
-
-
Bill Kuzeja authored
commit 5f7c2bee upstream. After a Qlogic card breaks when initializing (test case), the system can crash in qla2xxx_eh_abort if processing anything but a scsi command type srb. Fixes: 1535aa75 ("scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove") Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-By:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Lindgren authored
commit 4e0f5cc6 upstream. Otherwise the interconnect related code implementing PM runtime will produce these errors on a failed probe: omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1 omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver? Note that we now also need to check for priv in omap8250_runtime_suspend() as it has not yet been registered if probe fails. And we need to use pm_runtime_put_sync() to properly idle the device like we already do in omap8250_remove(). Fixes: 61929cf0 ("tty: serial: Add 8250-core based omap driver") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Stephen Boyd authored
commit 1a09b6a7 upstream. We get the following compile errors if EXTCON is enabled as a module but this driver is builtin: drivers/built-in.o: In function `qcom_usb_hs_phy_power_off': phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier' drivers/built-in.o: In function `qcom_usb_hs_phy_probe': phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle' drivers/built-in.o: In function `qcom_usb_hs_phy_power_on': phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state' phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier' so let's mark this as needing to follow the modular status of the extcon framework. Fixes: 9994a338 e2427b09 (phy: Add support for Qualcomm's USB HS phy") Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Heiko Stuebner authored
commit 9b1b23f0 upstream. The mux_pll_src_apll_dpll_gpll_usb480m_p parent list was missing a "," between the 3rd and 4th parent names, making them fall together and thus lookups fail. Fix that. Fixes: 5190c08b ("clk: rockchip: add clock controller for rk3036") Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Johan Hovold authored
commit 3c0e25d8 upstream. Make sure to detect short control-message transfers and log an error when reading incomplete manufacturer and boot descriptors. Note that the default all-zero descriptors will now be used after a short transfer is detected instead of partially initialised ones. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 36356a66 upstream. Make sure to detect short control-message transfers so that errors are logged when reading the modem status at open. Note that while this also avoids initialising the modem status using uninitialised heap data, these bits could not leak to user space as they are currently not used. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 8c34cb8d upstream. Make sure to detect short control-message transfers when fetching modem and line state in open and when retrieving registers. This specifically makes sure that an errno is returned to user space on errors in TIOCMGET instead of a zero bitmask. Also drop the unused getdevice function which also lacked appropriate error handling. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Reviewed-by:
-
Johan Hovold authored
commit e3e574ad upstream. Make sure to detect short responses when reading the latency timer to avoid using stale buffer data. Note that no heap data would currently leak through sysfs as ASYNC_LOW_LATENCY is set by default. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit b631433b upstream. Fix open error handling which failed to detect errors when reading the MSR and LSR registers, something which could lead to the shadow registers being initialised from errnos. Note that calling the generic close implementation is sufficient in the error paths as the interrupt urb has not yet been submitted and the register updates have not been made. Fixes: f4c1e8d5 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by:
-
Johan Hovold authored
commit 39712e8b upstream. Make sure to detect and return an error on zero-length control-message transfers when reading from the device. This addresses a potential failure to detect an empty transmit buffer during close. Also remove a redundant check for short transfer when sending a command. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit e4457d97 upstream. Use a dedicated buffer for the DMA transfer and make sure to detect short transfers to avoid parsing a corrupt descriptor. Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Reviewed-by:
-
Johan Hovold authored
commit 1eac5c24 upstream. Make sure to detect short control-message transfers rather than continue with zero-initialised data when retrieving modem status and during device initialisation. Fixes: 52af9545 ("USB: add USB serial ssu100 driver") Reviewed-by:
-
Johan Hovold authored
commit 1b0aed2b upstream. Make sure the received data has the required headers before parsing it. Also drop the redundant urb-status check, which has already been handled by the caller. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit c528fcb1 upstream. Make sure to check for short transfers before parsing the receive buffer to avoid acting on stale data. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Stephen Boyd authored
commit a89b94b5 upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by:
Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Fixes: 3ecb3e09 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by:
-
Stephen Boyd authored
commit f60f8ccd upstream. With the id and vbus detection done via extcon we need to make sure we poll the status of OTGSC properly by considering what the extcon is saying, and not just what the register is saying. Let's move this hw_wait_reg() function to the only place it's used and simplify it for polling the OTGSC register. Then we can make certain we only use the hw_read_otgsc() API to read OTGSC, which will make sure we properly handle extcon events. Acked-by:
-
Krzysztof Kozlowski authored
commit 68bd6fc3 upstream. Returning from for_each_available_child_of_node() loop requires cleaning up node refcount. Error paths lacked it so for example in case of deferred probe, the refcount of phy node was left increased. Fixes: 6d40500a ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 3f6026b1 upstream. Returning from for_each_available_child_of_node() loop requires cleaning up node refcount. Error paths lacked it so for example in case of deferred probe, the refcount of phy node was left increased. Fixes: 6d40500a ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs") Signed-off-by:
-
Nicholas Mc Guire authored
commit d3fe81d2 upstream. ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 100ms delays here passing the adjusted "min" value to msleep(). This helps reduce the load on the hrtimer subsystem. Link: http://lkml.org/lkml/2017/1/11/377 Fixes: commit 2938fc63 ("usb: dwc2: Properly account for the force mode delays") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Ladi Prosek authored
commit ab007cc9 upstream. The PML feature is not exposed to guests so we should not be forwarding the vmexit either. This commit fixes BSOD 0x20001 (HYPERVISOR_ERROR) when running Hyper-V enabled Windows Server 2016 in L1 on hardware that supports PML. Fixes: 843e4330 ("KVM: VMX: Add PML support in VMX") Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Ladi Prosek authored
commit 1fb883bb upstream. L2 was running with uninitialized PML fields which led to incomplete dirty bitmap logging. This manifested as all kinds of subtle erratic behavior of the nested guest. Fixes: 843e4330 ("KVM: VMX: Add PML support in VMX") Signed-off-by:
-
Jim Mattson authored
commit 0b4c208d upstream. This reverts commit bc613494. A CPUID instruction executed in VMX non-root mode always causes a VM-exit, regardless of the leaf being queried. Fixes: bc613494 ("KVM: nested VMX: disable perf cpuid reporting") Signed-off-by:
Jim Mattson <jmattson@google.com> [The issue solved by bc613494 has been resolved with ff651cb6 ("KVM: nVMX: Add nested msr load/restore algorithm").] Signed-off-by:
-
Andy Shevchenko authored
commit 80354c29 upstream. The interrupt line used for the watchdog is 12, according to the official Intel Edison BSP code. And indeed after fixing it we start getting an interrupt and thus the watchdog starts working again: [ 191.699951] Kernel panic - not syncing: Kernel Watchdog Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 78a3bb9e ("x86: intel-mid: add watchdog platform code for Merrifield") Link: http://lkml.kernel.org/r/20170312150744.45493-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit 75013fb1 upstream. Fix to the exception table entry check by using probed address instead of the address of copied instruction. This bug may cause unexpected kernel panic if user probe an address where an exception can happen which should be fixup by __ex_table (e.g. copy_from_user.) Unless user puts a kprobe on such address, this doesn't cause any problem. This bug has been introduced years ago, by commit: 46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently"). Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently") Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devboxSigned-off-by:
-
Pierre-Louis Bossart authored
commit f35b6542 upstream. Fix Makefile for x86 support, dependency on CONFIG_COMMON_CLK was not explicit Fixes: 701190fd ('clk: x86: add support for Lynxpoint LPSS clocks') Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by:
-
Dave Hansen authored
commit e64d5fbe upstream. Ingo pointed out that the MPX tests were no longer in the selftests Makefile. It appears that I shot myself in the foot on this one and accidentally removed them when I added the pkeys tests, probably from bungling a merge conflict. Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 5f23f6d0 ("x86/pkeys: Add self-tests") Link: http://lkml.kernel.org/r/20170201225629.C3070852@viggo.jf.intel.comSigned-off-by:
-
Nikola Pajkovsky authored
commit 68dee8e2 upstream. commit 8fd524b3 ("x86: Kill bad_dma_address variable") has killed bad_dma_address variable and used instead of macro DMA_ERROR_CODE which is always zero. Since dma_addr is unsigned, the statement dma_addr >= DMA_ERROR_CODE is always true, and not needed. arch/x86/kernel/pci-calgary_64.c: In function ‘iommu_free’: arch/x86/kernel/pci-calgary_64.c:299:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) { Fixes: 8fd524b3 ("x86: Kill bad_dma_address variable") Signed-off-by:
Nikola Pajkovsky <npajkovsky@suse.cz> Cc: iommu@lists.linux-foundation.org Cc: Jon Mason <jdmason@kudzu.us> Cc: Muli Ben-Yehuda <mulix@mulix.org> Link: http://lkml.kernel.org/r/7612c0f9dd7c1290407dbf8e809def922006920b.1479161177.git.npajkovsky@suse.czSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ruslan Ruslichenko authored
commit a9b4f087 upstream. commit d32932d0 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. There is no harm because the interrupts are resent in software when the retrigger callback is NULL, but it's less efficient. So restore them. [ tglx: Massaged changelog ] Fixes: d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by:
Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.comSigned-off-by:
-
Dan Carpenter authored
commit 251fe09f upstream. This is a static analysis fix. The warning is: drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect() warn: integer overflows 'sizeof(*desc) + len' I guess this code is supposed to take a NUL character, but if we write zero bytes then it tries to write -1 characters and crashes. Fixes: c91b865c ("iwlwifi: mvm: support description for user triggered fw dbg collection") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Sara Sharon authored
commit 4b70f076 upstream. When driver needs to access the contents of a streaming DMA buffer without unmapping it it should call dma_sync_single_for_cpu(). Once the call has been made, the CPU "owns" the DMA buffer and can work with it as needed. Before the device accesses the buffer, however, ownership should be transferred back to it with dma_sync_single_for_device(). Both calls weren't performed by the driver, resulting with odd paging errors on some platforms. Fix it. Fixes: a6c4fb44 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
commit c56108b5 upstream. In DQA mode, first_agg_queue is initialized to IWL_MVM_DQA_MIN_DATA_QUEUE. This causes two bugs in the tx response flow: 1. When TX fails, we set IEEE80211_TX_STAT_AMPDU_NO_BACK regardless if we actually have aggregation open on the queue. This causes mac80211 to send a BAR frame even though there is no aggregation open. Fix that by simply checking the AMPDU flag that is set on by mac80211 for AMPDU packets. 2. When reclaiming frames in aggregation mode, we reclaim based on scheduler ssn and not the SN. The reason is that scheduler ssn may be ahead of SN due to a hole in the BA window that was filled. However, if we have aggregations open on IWL_MVM_DQA_BSS_CLIENT_QUEUE the reclaim flow will still go to the code of non-aggregation instead of the aggregation code since IWL_MVM_DQA_BSS_CLIENT_QUEUE is smaller than IWL_MVM_DQA_MIN_DATA_QUEUE, although it is a valid aggregation queue. Fix that by always using the aggregation reclaim code by default in DQA mode (currently it is implicitly used by default for all queues except the reserved BSS queue). Fixes: cf961e16 ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by:
-
Sara Sharon authored
commit 94c3e614 upstream. In DQA mode the check whether to decrement the pending frames counter relies on the tid status and not on the txq id. This may result in an inconsistent state of the pending frames counter in case frame is queued on a non aggregation queue but with this TID, and will be followed by a failure to remove the station and later on SYSASSERT 0x3421 when trying to remove the MAC. Such frames are for example bar and qos NDPs. Fix it by aligning the condition of incrementing the counter with the condition of decrementing it - rely on TID state for DQA mode. Also, avoid internal error like this affecting station removal for DQA mode - since we can know for sure it is an internal error. Fixes: cf961e16 ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by:
-
Johannes Berg authored
commit 05e5a7e5 upstream. Instead of setting the tx_cmd length in the mvm code, which is complicated by the fact that DQA may want to temporarily store the SKB on the side, adjust the length in the PCIe code which also knows about this since it's responsible for duplicating all those headers that are account for in this code. As the PCIe code already relies on the tx_cmd->len field, this doesn't really introduce any new dependencies. To make this possible we need to move the memcpy() of the TX command until after it was updated. This does even simplify the code though, since the PCIe code already does a lot of manipulations to build A-MSDUs correctly and changing the length becomes a simple operation to see how much was added/removed, rather than predicting it. Fixes: 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Beni Lev authored
commit 6574dc94 upstream. Since offchannel activity doesn't always require a BSS, e.g. ANQP sessions, offchannel frames should not use the BSS queue, because it might not be initialized. Use the auxilary queue instead Fixes: e3118ad7 ("iwlwifi: mvm: support tdls in dqa mode") Signed-off-by:
Beni Lev <beni.lev@intel.com> Signed-off-by:
-
Sara Sharon authored
commit 5351f9ab upstream. When NSSN is behind the reorder buffer due to timeout the reorder timer isn't getting re-armed until NSSN catches up. Fix it. Fixes: 0690405f ("iwlwifi: mvm: add reorder timeout per frame") Signed-off-by:
-
Sara Sharon authored
commit 2c6262b7 upstream. Our 9000 device supports 64 bit DMA address for RX only, and not for TX. Setting DMA mask to 64 for the whole device is erroneous - we can do it only for a000 devices where device is capable of both RX & TX DMA with 64 bit address space. Fixes: 96a6497b ("iwlwifi: pcie: add 9000 series multi queue rx DMA support") Signed-off-by:
-
Kirtika Ruchandani authored
commit 3ce4a038 upstream. shift_param is defined and set in iwl_pcie_load_cpu_sections but not used. Fix this to avoid -Wunused-but-set-variable warning. The code using it turned into dead code with commit dcab8ecd ("iwlwifi: mvm: support ucode load for family_8000 B0 only") which added a separate function iwl_pcie_load_given_ucode_8000 (then 8000b) for IWL_DEVICE_FAMILY_8000. Commit 76f8c0e1 ("iwlwifi: pcie: remove dead code") removed the dead code but left shift_param as is. iwlwifi/pcie/trans.c: In function ‘iwl_pcie_load_cpu_sections’: iwlwifi/pcie/trans.c:871:6: warning: variable ‘shift_param’ set but not used [-Wunused-but-set-variable] Fixes: dcab8ecd ("iwlwifi: mvm: support ucode load for family_8000 B0 only") Fixes: 76f8c0e1 ("iwlwifi: pcie: remove dead code") Signed-off-by:
Kirtika Ruchandani <kirtika@google.com> Cc: Sara Sharon <sara.sharon@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Liad Kaufman <liad.kaufman@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [removed some unnecessary braces] Signed-off-by:
-
Emmanuel Grumbach authored
commit 04fa3e68 upstream. David reported that the code I added uses the decrement and increment operator on a boolean variable. Fix that. Fixes: 0cd58eaa ("iwlwifi: pcie: allow the op_mode to block the tx queues") Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
commit bd05a5bd upstream. We don't really need clear the skb's status area nor store the dev_cmd into it until we really commit to the frame by handing it to the transport - defer those operations until just before we do that. This doesn't entirely fix the bug with frames not getting sent out after having been deferred due to DQA, because it doesn't restore the info->driver_data[0] place that was already set to zero (or another value) by the A-MSDU logic. Fixes: 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
-
Luca Coelho authored
commit bac453ab upstream. For unified images, we shouldn't restart the HW if suspend fails. The only reason for restarting the HW with non-unified images is to go back to the D0 image. Fixes: 23ae6128 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by:
-
