- 30 Oct, 2014 14 commits
-
-
Hante Meuleman authored
Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Hante Meuleman authored
Reviewed-by:
-
Hante Meuleman authored
Reviewed-by:
-
Hante Meuleman authored
__brcmf_err is a tracepoint specific function. Move it to tracepoint.c. Reviewed-by:
-
Hante Meuleman authored
Packet filters got configured but never used. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Reviewed-by:
-
Hante Meuleman authored
Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Passing the firmware error codes up the driver may be mapped to linux error numbers which may impact proper fault analysis. So better pass up a generic failure code, ie. -EBADE and only show firmware error code in FIL debug message. Reviewed-by:
-
Arend van Spriel authored
The define EBRCMF_UNSUPPORTED is not used in the source file so this patch removes it. Reviewed-by:
-
Arend van Spriel authored
Showing the firmware error allows to quickly give a clue what went wrong and directly look in the firmware code that gave us back the error. Reviewed-by:
-
Hante Meuleman authored
Reviewed-by:
-
Hante Meuleman authored
This patch adds wowl support for SDIO bus devices. This feature requires FW which has support for wowl built in. Reviewed-by:
-
Hante Meuleman authored
This patch adds wowl support for USB bus devices. This feature requires FW which has support for wowl built in. Reviewed-by:
-
Lorenzo Bianconi authored
Reduce pulse_rssi threshold to 15 in order to improve radar pattern detection probability on ext channel Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by:
-
John W. Linville authored
Merge tag 'iwlwifi-next-for-john-2014-10-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Emmanuel Grumbach <egrumbach@gmail.com> says: "The big new thing here is netdetect which allows the firmware to wake up the platform when a specific network is detected. Along with that I have fixes for d3 operation. The usual amount of rate scaling stuff - we now support STBC. The other commit that stands out is Johannes's work on devcoredump. He basically starts to use the standard infrastructure he built." Signed-off-by:
-
- 29 Oct, 2014 26 commits
-
-
Eliad Peller authored
The scan reference wasn't released in case of offloaded scan, causing the refcount to go wrong and prevent the device from going into d0i3. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Eyal Shapira authored
STBC is enabled on HT/VHT SISO rates in case we don't care about power consumption and it won't hurt BT. This is done only in case the peer and our chip support STBC of course. While at it fixed a bug which was causing bw and ldpc flags to be set incorrectly in the rate scale table in case we are switching to a legacy Tx column. This had no real impact. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by:
-
David Spinadel authored
Scan condition iterator assumes that an interface is associated if phy_ctxt is assigned, but this isn't the sutuation in P2P device. OTOH P2P device is never associated so we can simply ignore it. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
-
Johannes Berg authored
iwlwifi features a debug mechanism that allows to dump binary data which is helpful to debug the firmware. Until now, this data was made available for the userspace through debugfs. For this exact purpose, devcoredump was created. Move to the new infrastructure. Signed-off-by:
-
Eyal Shapira authored
These chips support STBC in both Tx and Rx. Given that we've added STBC Tx support enable it. Signed-off-by:
-
Joe Perches authored
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Luciano Coelho authored
We used to need to include some headers in order to read the registers and do all the calculations by ourselves, but this is not done anymore (i.e. we let the firmware do this for us), so we don't need to include those headers anymore. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
For WMM-AC we may have to be changing QoS parameters while the queues are being flushed. This is not relevant in the "drop" case, but matters when we wait for the device to finish the transmissions. To allow this, do the actual waiting without holding the mutex. Signed-off-by:
-
Johannes Berg authored
The warning gives no information about the frame, and presents the flags so that one might think they're the frame. Clarify and add more information. Signed-off-by:
-
Emmanuel Grumbach authored
This makes it easier to tune the values during the testing. Signed-off-by: -
Arik Nemtsov authored
It is unused and won't be available in some future invocations of the function. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by:
-
Max Stepanov authored
The MVM_FW_BCAST_FILTER_PASS_ALL option defined in iwl-dbg-cfg.ini configuration file allows to enable/disable FW broadcast filtering. If MVM_FW_BCAST_FILTER_PASS_ALL is not defined in iwl-dbg-cfg.ini or its value is 0, the mvm broadcast filtering is enabled. Setting MVM_FW_BCAST_FILTER_PASS_ALL=1 in iwl-dbg-cfg.ini blocks sending of BCAST_FILTER_CMD to FW. Signed-off-by:
Max Stepanov <Max.Stepanov@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This is were it really needs to be. Signed-off-by: -
Eran Harary authored
In the new format the "CSS section" has the same TLV type as the "mem section". So we need to run the secured flow for all the 8000 products. Signed-off-by:
Eran Harary <eran.harary@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
When the ARC is reset when we exit from Sx in case we had WoWLAN running, we can't access the prph before we reset the NIC. Reviewed-by:
-
Emmanuel Grumbach authored
Otherwise we have no way to know that the buffer hasn't been allocated. Signed-off-by: -
Gregory Greenman authored
A few slave bus devices show better performance when we reduce the size of the Tx A-MPDU. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Luciano Coelho authored
Getting the BSS station vif is something that may be needed by other parts of the code. So, instead of having an iterator specifically for d3, change it into a generic one in utils.c. Additionally, add a iwl_mvm_get_bss_vif() function to make it easier to retrieving it. Signed-off-by:
-
Luciano Coelho authored
Before we get all the chain (ie. mac80211, cfg80211, nl80211 and userspace) changed to support net-detect, we can use this debugfs entry for easy testing and as a proof of concept. Signed-off-by:
-
Luciano Coelho authored
The net-detect feature will require a scan offload to be started in the same way it is done now for scheduled scan. Spin a new function off of the sched_scan_start op code for reuse. Additionally, restructure the function a bit for more readability. Signed-off-by:
-
Luciano Coelho authored
Instead of checking if we are associated when suspending with wowlan enabled in the interface iterator, allow it to return an unassociated vif and move the check to the main suspend function. This will be needed by netdetect, since it should also work when we are not associated but the vif is active. Signed-off-by:
-
Luciano Coelho authored
Take the WoWLAN handling code out of the main suspend function, dividing it into three parts: get_config (which is used before the firmware is switched), switch_to_d3 (which handles the rebooting of the hardware with the D3 firmware) and config (which configures the D3 firmware for WoWLAN operation). This is necessary to prepare for the net-detect implementation, which will use only the switch_to_d3 part of this flow. Signed-off-by:
-
Luciano Coelho authored
We use ieee80211_iter_keys() which requires the rtnl to be held. If we don't lock the rtnl, like we do when we suspend during a d3 test, we get the following splat: RTNL: assertion failed at net/mac80211/key.c (566) CPU: 1 PID: 26529 Comm: cat Tainted: G W O 3.10.29-dev #1 Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 e7b15008 e7b15008 e68adc1c c168aa62 e68adc54 f91f20b6 f923700c f9236fd8 00000236 00000000 ece23874 00000000 f94941e0 00000000 e43b8e48 e7b15008 00000000 e8b69e78 e68adcc0 f9493ab9 e68adc68 00000000 e43b8e48 e7b15008 Call Trace: [<c168aa62>] dump_stack+0x16/0x18 [<f91f20b6>] ieee80211_iter_keys+0x166/0x170 [mac80211] [<f94941e0>] ? iwl_mvm_query_wakeup_reasons+0x5f0/0x5f0 [iwlmvm] [<f9493ab9>] iwl_mvm_setup_connection_keep.isra.5+0x99/0x1d0 [iwlmvm] [<f9165e28>] ? cfg80211_report_wowlan_wakeup+0x308/0x510 [cfg80211] [<f9493fe5>] iwl_mvm_query_wakeup_reasons+0x3f5/0x5f0 [iwlmvm] [<c116125a>] ? init_object+0x3a/0x70 [<f8a5b8ee>] ? iwl_trans_pcie_d3_resume+0x1be/0x3a0 [iwlwifi] [<f94956da>] __iwl_mvm_resume+0x14a/0x180 [iwlmvm] [<f9495736>] iwl_mvm_d3_test_release+0x26/0xc0 [iwlmvm] [<c117a64d>] __fput+0xad/0x210 [<c117a7bd>] ____fput+0xd/0x10 [<c10601a1>] task_work_run+0x81/0xb0 [<c1040fa5>] do_exit+0x255/0xac0 [<c104e511>] ? dequeue_signal+0x31/0x1a0 [<c1041888>] do_group_exit+0x38/0xa0 [<c10a6cfb>] ? trace_hardirqs_on+0xb/0x10 [<c1051c31>] get_signal_to_deliver+0x1e1/0x8e0 [<c104bd52>] ? try_to_del_timer_sync+0x42/0x60 [<c104bd70>] ? try_to_del_timer_sync+0x60/0x60 [<c168dc82>] ? schedule_timeout+0x102/0x2a0 [<c10011ba>] do_signal+0x3a/0x8e0 [<c104b190>] ? __internal_add_timer+0xb0/0xb0 [<c168de7a>] ? schedule_timeout_interruptible+0x1a/0x20 [<c104ce39>] ? msleep_interruptible+0x39/0x40 [<f94939a9>] ? iwl_mvm_d3_test_read+0x49/0x70 [iwlmvm] [<c11797fc>] ? vfs_read+0x8c/0x160 [<c11243af>] ? SyS_fadvise64_64+0x15f/0x2b0 [<f9493960>] ? iwl_mvm_wowlan_program_keys+0x4a0/0x4a0 [iwlmvm] [<c1179a57>] ? SyS_read+0x57/0xa0 [<c1001acf>] do_notify_resume+0x6f/0xa0 [<c1692500>] work_notifysig+0x29/0x31 Fix this by hold the rtnl lock when calling __iwl_mvm_resume() in the d3 test wake up path. Signed-off-by:
-
Emmanuel Grumbach authored
mac80211 will never call rate_control_tx_status with a NULL pointer for sta. Remove the superfluous check. This check misled smatch. Signed-off-by: -
Eyal Shapira authored
The current TLC isn't optimized for low latency and some devices have issues with MIMO. This kind of combo creates latency issues. Allow to temporarily disable MIMO for tests in order to solve the latency issues without the added complexity of MIMO. Signed-off-by:
-
Emmanuel Grumbach authored
-
