Don't log if there is no signal.
If there is a signal, then also log HDCP and audio status.
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The frequency calculation has to take deep-color mode into account.
While we're at it, also log the deep-color mode in log_status.
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The bridge driver is only notified when the input status has changed
since the previous interrupt.
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

This patch fixes two errors that caused incorrect format detections:
The first bug is in the calculation of the vertical backporch: the combined
period of vsync and backporch must *exceed* a certain minimum value, and not
be equal to it.
The second bug is a rounding error in the reduced blanking calculation:
expand the ideal_duty_cylce to be in parts per ten thousand to avoid
rounding errors.
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

When 2 devices are registered at the same time, in Part 2 both will get
the same minor number, making Part6 crash, because it cannot create a
create a device with a duplicated minor:
[    7.157648] ------------[ cut here ]------------
[    7.157666] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0()
[    7.157669] sysfs: cannot create duplicate filename '/dev/char/81:1'
[    7.157672] Modules linked in: qtec_xform(+) qt5023_video(+) videobuf2_vmalloc videobuf2_dma_sg videobuf2_memops videobuf2_core gpio_xilinx(+) qtec_white qtec_cmosis(+) qtec_pcie qt5023
[    7.157694] CPU: 0 PID: 120 Comm: systemd-udevd Not tainted 3.10.0-qtec-standard #8
[    7.157698] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 05/23/2013
[    7.157702]  0000000000000009 ffff8801788358e8 ffffffff8176c487 ffff880178835928
[    7.157707]  ffffffff8106f6f0 ffff880175759770 00000000ffffffef ffff880175759930
[    7.157712]  ffff8801788359e8 ffff880178bff000 ffff880175759930 ffff880178835988
[    7.157718] Call Trace:
[    7.157728]  [<ffffffff8176c487>] dump_stack+0x19/0x1b
[    7.157735]  [<ffffffff8106f6f0>] warn_slowpath_common+0x70/0xa0
[    7.157740]  [<ffffffff8106f7d6>] warn_slowpath_fmt+0x46/0x50
[    7.157746]  [<ffffffff81324b35>] ? strlcat+0x65/0x90
[    7.157750]  [<ffffffff811d516d>] sysfs_add_one+0xbd/0xe0
[    7.157755]  [<ffffffff811d5c6b>] sysfs_do_create_link_sd+0xdb/0x200
[    7.157760]  [<ffffffff811d5db1>] sysfs_create_link+0x21/0x40
[    7.157765]  [<ffffffff813e277b>] device_add+0x21b/0x6d0
[    7.157772]  [<ffffffff813f2985>] ? pm_runtime_init+0xe5/0xf0
[    7.157776]  [<ffffffff813e2c4e>] device_register+0x1e/0x30
[    7.157782]  [<ffffffff8153e8c3>] __video_register_device+0x313/0x610
[    7.157791]  [<ffffffffa00957c5>] qtec_xform_probe+0x465/0x7a4 [qtec_xform]
[    7.157797]  [<ffffffff813e7b13>] platform_drv_probe+0x43/0x80
[    7.157802]  [<ffffffff813e531a>] ? driver_sysfs_add+0x7a/0xb0
[    7.157807]  [<ffffffff813e584b>] driver_probe_device+0x8b/0x3a0
[    7.157812]  [<ffffffff813e5c0b>] __driver_attach+0xab/0xb0
[    7.157816]  [<ffffffff813e5b60>] ? driver_probe_device+0x3a0/0x3a0
[    7.157820]  [<ffffffff813e37fd>] bus_for_each_dev+0x5d/0xa0
[    7.157825]  [<ffffffff813e529e>] driver_attach+0x1e/0x20
[    7.157829]  [<ffffffff813e4d3e>] bus_add_driver+0x10e/0x280
[    7.157833]  [<ffffffffa0099000>] ? 0xffffffffa0098fff
[    7.157837]  [<ffffffffa0099000>] ? 0xffffffffa0098fff
[    7.157842]  [<ffffffff813e6317>] driver_register+0x77/0x170
[    7.157848]  [<ffffffff81151bcc>] ? __vunmap+0x9c/0x110
[    7.157852]  [<ffffffffa0099000>] ? 0xffffffffa0098fff
[    7.157857]  [<ffffffff813e7236>] platform_driver_register+0x46/0x50
[    7.157863]  [<ffffffffa0099010>] qtec_xform_plat_driver_init+0x10/0x12 [qtec_xform]
[    7.157869]  [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
[    7.157875]  [<ffffffff810cf1f1>] load_module+0x1a91/0x2630
[    7.157880]  [<ffffffff8133bee0>] ? ddebug_proc_show+0xe0/0xe0
[    7.157887]  [<ffffffff817760f2>] ? page_fault+0x22/0x30
[    7.157892]  [<ffffffff810cfe7a>] SyS_init_module+0xea/0x140
[    7.157898]  [<ffffffff8177e5b9>] tracesys+0xd0/0xd5
[    7.157902] ---[ end trace 660cc3a65a4bf01b ]---
[    7.157939] __video_register_device: device_register failed
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Prevent following build warning:
drivers/media/v4l2-core/v4l2-ctrls.c: In function v4l2_ctrl_new_std_menu:
drivers/media/v4l2-core/v4l2-ctrls.c:1768:15: warning: 'qmenu_int_len' may be used uninitialized in this function
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

add OF support for the tvp7002 driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds 'sync-on-green-active' property as part
of endpoint property.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

When using devm_ioremap_resource(), we do not need to check the return value of
platform_get_resource(), so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Some resources were not being released in the error path and some were released
in the incorrect order.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

When streamoff is called on the context and the context
is added to the job_queue,
1] sometimes device_run receives the empty vb2 buffers (as
   v4l2_m2m_streamoff is dropping the ready queue).
2] sometimes v4l2_m2m_job_finish may not succeed as the m2m_dev->curr_ctx
   is made NULL in the v4l2_m2m_streamoff()
The above points may stop the execution of the other queued contexts.
This patch makes sure that before streamoff is executed on any context,
that context should "not be running" or "not queued" in the job_queue.
1] If the current context is running, then abort job will be called.
2] If the current context is queued, then the context will be removed from
   the job_queue.
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

If NO_DMA=y:
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’
Commit da508f57 ("[media] media/v4l2:
VIDEOBUF2_DMA_CONTIG should depend on HAS_DMA") added a dependency on
HAS_DMA to VIDEO_SH_VEU, as it selects VIDEOBUF2_DMA_CONTIG.
However, this got lost in the merge conflict resolution in commit
df90e225 ("Merge branch 'devel-for-v3.10'
into v4l_for_linus").
Re-add the dependency to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The KWorld UB445-U is similar to the UB430-AF but with a Samsung S5H1411
frontend. Luckily all of the hardware is already well supported, just the
device and USB ids need to be added to get it to work.
Signed-off-by: Johannes Erdfelt <johannes@erdfelt.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

At least technisat-usb2.c doesn't set these...
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

GIT_AUTHOR_DATE=1376465691
I took a quick look at the code and wonder if the problem is caused by
an initial zero statistics message?  This is all just a wild guess, but
if it is correct, then the attached untested patch might fix it...
Bjørn
>From d78a0599d5b5d4da384eae08bf7da316389dfbe5 Mon Sep 17 00:00:00 2001
ts_packets and ets_packets counters can be 0.  Don't fall over
if they are. Fixes:
[  846.851711] divide error: 0000 [#1] SMP
[  846.851806] Modules linked in: smsdvb dvb_core ir_lirc_codec lirc_dev ir_sanyo_decoder ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge smsusb smsmdtv rc_core pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) parport_pc ppdev lp parport cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc ext4 jbd2 fuse tp_smapi(O) thinkpad_ec(O) loop firewire_sbp2 dm_crypt snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm thinkpad_acpi nvram snd_page_alloc hid_generic snd_seq_midi snd_seq_midi_event arc4 usbhid snd_rawmidi uvcvideo hid iwldvm coretemp kvm_intel mac8021
 1 cdc_wdm
[  846.853477]  cdc_acm snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media kvm radeon r852 ttm joydev cdc_ether usbnet pcmcia mii sm_common nand btusb drm_kms_helper tpm_tis acpi_cpufreq bluetooth iwlwifi nand_ecc drm nand_ids i2c_i801 mtd snd_seq_device iTCO_wdt iTCO_vendor_support r592 memstick lpc_ich mperf tpm yenta_socket pcmcia_rsrc pcmcia_core cfg80211 snd_timer snd pcspkr i2c_algo_bit crc16 i2c_core tpm_bios processor mfd_core wmi psmouse mei_me rfkill mei serio_raw soundcore evdev battery button video ac microcode ext3 mbcache jbd md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t thermal thermal_sys ahci libahci ehci_pci uhci_hcd ehci_hcd libata scsi_mod usbcore e1000
 e usb_common
[  846.855310]  ptp pps_core
[  846.855356] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10-2-amd64 #1 Debian 3.10.5-1
[  846.855490] Hardware name: LENOVO 4061WFA/4061WFA, BIOS 6FET92WW (3.22 ) 12/14/2011
[  846.855609] task: ffffffff81613400 ti: ffffffff81600000 task.ti: ffffffff81600000
[  846.855636] RIP: 0010:[<ffffffffa092be0c>]  [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[  846.863906] RSP: 0018:ffff88013bc03cf0  EFLAGS: 00010046
[  846.863906] RAX: 0000000000000000 RBX: ffff880133bf6000 RCX: 0000000000000000
[  846.863906] RDX: 0000000000000000 RSI: ffff88005d3b58c0 RDI: ffff880133bf6000
[  846.863906] RBP: ffff88005d1da000 R08: 0000000000000058 R09: 0000000000000015
[  846.863906] R10: 0000000000001a0d R11: 000000000000021a R12: ffff88005d3b58c0
[  846.863906] R13: ffff88005d1da008 R14: 00000000ffffff8d R15: ffff880036cf5060
[  846.863906] FS:  0000000000000000(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000
[  846.863906] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  846.863906] CR2: 00007f3a4b69ae50 CR3: 0000000036dac000 CR4: 00000000000407f0
[  846.863906] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  846.863906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  846.863906] Stack:
[  846.863906]  ffff88007a102000 ffff88005d1da000 ffff88005d3b58c0 0000000000085824
[  846.863906]  ffffffffa08c5aa3 ffff88005d1da000 ffff8800a6907390 ffff8800a69073b0
[  846.863906]  ffff8800a6907000 ffffffffa08b642c 000000000000021a ffff8800a69073b0
[  846.863906] Call Trace:
[  846.863906]  <IRQ>
[  846.863906]
[  846.863906]  [<ffffffffa08c5aa3>] ? smscore_onresponse+0x1d5/0x353 [smsmdtv]
[  846.863906]  [<ffffffffa08b642c>] ? smsusb_onresponse+0x146/0x192 [smsusb]
[  846.863906]  [<ffffffffa004cb1a>] ? usb_hcd_giveback_urb+0x6c/0xac [usbcore]
[  846.863906]  [<ffffffffa0217be1>] ? ehci_urb_done+0x62/0x72 [ehci_hcd]
[  846.863906]  [<ffffffffa0217c82>] ? qh_completions+0x91/0x364 [ehci_hcd]
[  846.863906]  [<ffffffffa0219bba>] ? ehci_work+0x8a/0x68e [ehci_hcd]
[  846.863906]  [<ffffffff8107336c>] ? timekeeping_get_ns.constprop.10+0xd/0x31
[  846.863906]  [<ffffffff81064d41>] ? update_cfs_rq_blocked_load+0xde/0xec
[  846.863906]  [<ffffffff81058ec2>] ? run_posix_cpu_timers+0x25/0x575
[  846.863906]  [<ffffffffa021aa46>] ? ehci_irq+0x211/0x23d [ehci_hcd]
[  846.863906]  [<ffffffffa004c0c1>] ? usb_hcd_irq+0x31/0x48 [usbcore]
[  846.863906]  [<ffffffff810996fd>] ? handle_irq_event_percpu+0x49/0x1a4
[  846.863906]  [<ffffffff8109988a>] ? handle_irq_event+0x32/0x4b
[  846.863906]  [<ffffffff8109bd76>] ? handle_fasteoi_irq+0x80/0xb6
[  846.863906]  [<ffffffff8100e93e>] ? handle_irq+0x18/0x20
[  846.863906]  [<ffffffff8100e657>] ? do_IRQ+0x40/0x95
[  846.863906]  [<ffffffff813883ed>] ? common_interrupt+0x6d/0x6d
[  846.863906]  <EOI>
[  846.863906]
[  846.863906]  [<ffffffff812a011c>] ? arch_local_irq_enable+0x4/0x8
[  846.863906]  [<ffffffff812a04f3>] ? cpuidle_enter_state+0x52/0xc1
[  846.863906]  [<ffffffff812a0636>] ? cpuidle_idle_call+0xd4/0x143
[  846.863906]  [<ffffffff8101398c>] ? arch_cpu_idle+0x5/0x17
[  846.863906]  [<ffffffff81072571>] ? cpu_startup_entry+0x10d/0x187
[  846.863906]  [<ffffffff816b3d3d>] ? start_kernel+0x3e8/0x3f3
[  846.863906]  [<ffffffff816b3777>] ? repair_env_string+0x54/0x54
[  846.863906]  [<ffffffff816b3598>] ? x86_64_start_kernel+0xf2/0xfd
[  846.863906] Code: 25 09 00 00 c6 83 da 08 00 00 03 8b 45 54 48 01 83 b6 08 00 00 8b 45 50 48 01 83 db 08 00 00 8b 4d 18 69 c1 ff ff 00 00 03 4d 14 <48> f7 f1 89 83 a8 09 00 00 e9 68 fe ff ff 48 8b 7f 10 e8 79 92
[  846.863906] RIP  [<ffffffffa092be0c>] smsdvb_onresponse+0x264/0xa86 [smsdvb]
[  846.863906]  RSP <ffff88013bc03cf0>
Reference: http://bugs.debian.org/719623Reported-by: Johannes Rohr <jorohr@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Those boards were missing the ISDB-T support.
Most of the work on this patch were done by Alfredo.
My work here were to port this patch from Kernel 3.2 to upstream,
fix the issue caused by the set_frontend bad hook, and add the
Kconfig bits.
Tested on a X8502 board rebranded as:
"Leadership - Placa PCI-e de Captura de Vídeo Híbrida" - product code 3800.

Thanks-to: Alfredo Delaiti <alfredodelaiti@netscape.net>
Tested-by: Alfredo Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

changeset 768e6dad caused a regression on using mb86a20s
in parallel mode, as the parallel mode selection got
overriden by mb86a20s_init2.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

When the frontend drivers got converted to DVBv5 API, the original
hook that tracked when a frontend is set got removed, being replaced
by an approach that would use the gate control. That doesn't work
fine with some boards. Also, the code were called more times than
desired.
Replace it by a logic that will hook the dvb set_frontend ops,
with works with both DVBv3 and DVBv5 calls.
Tested on a Mygica X8502 OEM board.
Tested-by: Alfredo Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Add a maintainers entry for the Aptina PLL library, and rename the
Aptina sensors entries to make it clear they refer to Aptina camera
sensors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The two operations are very similar, refactor most of the code in a
helper function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Commit b037c0fd ("media: vb2: fix
potential deadlock in mmap vs. get_userptr handling") fixes an AB-BA
deadlock related to the mmap_sem and driver locks. The same deadlock can
occur in vb2_prepare_buffer(), fix it the same way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Note that with the rc-feedback trigger, the cir-rx trigger is now
redundant. The cir-tx trigger is not used by default; if this
functionality is desired then it should exist in rc-core, not in
a driver.
Also make sure that the led is suspended on suspend.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Many devices with an ir receiver also have a feedback led. Add the
led trigger to support this.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The length in the header excludes the header itself, so we're getting
spurious readings.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

As the clock framework makes it possible to assign a device specific name to
the clocks, remove the ability to use a named clock in the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Prepare clocks before enabling and unprepare after disabling them.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

The PLL calculation heuristics is rather complicated and and is often
difficult to understand to its original author.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

clamp_t does the job to put a variable into the given range.
clamp_t -> clamp as agreed with Andy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Configure the device external clock using the common clock framework
instead of a board code callback function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Hello,
this is a new gspca driver for Syntek STK1135 webcams. The code is completely
new, but register values are based on Syntekdriver (stk11xx) by Nicolas VIVIEN
(http://syntekdriver.sourceforge.net).
Only one webcam type is supported now - vendor 0x174f, device 0x6a31.
It's Asus F5RL laptop flippable webcam with MT9M112.
The camera works better than in Windows - initializes much faster and
provides more resolutions (the sensor can do almost any resolution - just
add it to the stk1135_modes[] - could this feature be somehow used by
applications to avoid SW scaling?).
Autoflip works too - when the camera is flipped around, the image is flipped
automatically.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

sd_start() operates on device controls but after the conversion to the
v4l2 control framework in commits 62bba5dd and 1bd7d6ad controls are
initialized in sd_init_controls() which is called _after_ sd_init():
The change fixes a NULL pointer dereference for Hercules Blog Webcam;
the problem is observable since 3.6:
  gspca_main: v2.14.0 registered
  gspca_main: ov534-2.14.0 probing 06f8:3002
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
  IP: [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev]
  PGD 0
  Oops: 0000 [#1] SMP
  Modules linked in: gspca_ov534(+) gspca_main videodev rfcomm bnep ppdev bluetooth binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek stir4200 irda crc_ccitt usblp snd_hda_intel snd_hda_codec snd_hwdep snd_pcm hid_generic snd_page_alloc snd_seq_midi snd_seq_midi_event usbhid snd_rawmidi snd_seq snd_seq_device snd_timer hid i915 snd psmouse drm_kms_helper serio_raw mei_me drm mei soundcore video i2c_algo_bit lpc_ich mac_hid coretemp lp parport firewire_ohci firewire_core crc_itu_t ahci libahci alx mdio r8169 mii [last unloaded: parport_pc]
  CPU: 3 PID: 4352 Comm: modprobe Not tainted 3.11.0-031100rc2-generic #201307211535
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F9 09/19/2012
  task: ffff8801c20f9770 ti: ffff8801ceaa0000 task.ti: ffff8801ceaa0000
  RIP: 0010:[<ffffffffa03c1b01>]  [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev]
  RSP: 0018:ffff8801ceaa1af8  EFLAGS: 00010292
  RAX: 0000000000000001 RBX: 0000000000000000 RCX: 000000000001988b
  RDX: 000000000001988a RSI: ffffffffa032745a RDI: 0000000000000000
  RBP: ffff8801ceaa1b28 R08: 0000000000017380 R09: ffffea0008419d80
  R10: ffffffff81538f5a R11: 0000000000000002 R12: ffffffffa03273dc
  R13: ffffffffa03273dc R14: 0000000000000000 R15: ffffffffa03270a0
  FS:  00007f72d564a740(0000) GS:ffff88021f380000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000050 CR3: 00000001bd1f0000 CR4: 00000000001407e0
  Stack:
   ffff8801ceaa1b28 ffffffffa0325cff ffff8801000001f4 ffff8801ceb44000
   ffffffffa03273dc ffff8801ceb44000 ffff8801ceaa1b58 ffffffffa032688e
   ffff8801ceb44000 ffffffffa03274f0 ffffffffa03274f0 ffff8801ceb44380
  Call Trace:
   [<ffffffffa0325cff>] ? sccb_w_array+0x3f/0x80 [gspca_ov534]
   [<ffffffffa032688e>] sd_start+0xce/0x2b0 [gspca_ov534]
   [<ffffffffa0326bf9>] sd_init+0x189/0x1e8 [gspca_ov534]
   [<ffffffffa02a0c95>] gspca_dev_probe2+0x285/0x410 [gspca_main]
   [<ffffffffa02a0e58>] gspca_dev_probe+0x38/0x60 [gspca_main]
   [<ffffffffa0325081>] sd_probe+0x21/0x30 [gspca_ov534]
   [<ffffffff8153c960>] usb_probe_interface+0x1c0/0x2f0
   [<ffffffff8148758c>] really_probe+0x6c/0x330
   [<ffffffff814879d7>] driver_probe_device+0x47/0xa0
   [<ffffffff81487adb>] __driver_attach+0xab/0xb0
   [<ffffffff81487a30>] ? driver_probe_device+0xa0/0xa0
   [<ffffffff814857be>] bus_for_each_dev+0x5e/0x90
   [<ffffffff8148714e>] driver_attach+0x1e/0x20
   [<ffffffff81486bdc>] bus_add_driver+0x10c/0x290
   [<ffffffff8148805d>] driver_register+0x7d/0x160
   [<ffffffff8153b590>] usb_register_driver+0xa0/0x160
   [<ffffffffa0067000>] ? 0xffffffffa0066fff
   [<ffffffffa006701e>] sd_driver_init+0x1e/0x1000 [gspca_ov534]
   [<ffffffff8100212a>] do_one_initcall+0xfa/0x1b0
   [<ffffffff810578c3>] ? set_memory_nx+0x43/0x50
   [<ffffffff81712e8d>] do_init_module+0x80/0x1d1
   [<ffffffff810d2079>] load_module+0x4c9/0x5f0
   [<ffffffff810cf7b0>] ? add_kallsyms+0x210/0x210
   [<ffffffff810d2254>] SyS_init_module+0xb4/0x100
   [<ffffffff817333ef>] tracesys+0xe1/0xe6
  Code: a0 09 00 00 48 c7 c7 30 c3 3c a0 e8 7a 38 ca e0 eb cf 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 28 <8b> 47 50 83 e8 05 83 f8 02 77 09 80 b8 20 8c 3c a0 00 74 1d 48
  RIP  [<ffffffffa03c1b01>] v4l2_ctrl_g_ctrl+0x11/0x60 [videodev]
   RSP <ffff8801ceaa1af8>
  CR2: 0000000000000050
  ---[ end trace 6786f15abfd2ac90 ]---
Original bug report from:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173723/Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Tested-by: Yaroslav Zakharuk <slavikz@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

If v4l2_fh_open() fails in dev_open(), gspca_dev->module left locked.
The patch adds module_put(gspca_dev->module) on this path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

We've an user reporting a device with a software version of 0, which works
fine. Once we lower the version check to accept version 0 it becomes a nop,
so remove it completely.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

* Fix AM_MODE. Now it could work at least in theory, cannot test.
* Use greatest common divisor algo to divide PLL fractional parts.
* Fix IF frequency mode.
* + some very minor "style" issues
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

After feeding different signal levels using RF generator and looking
GNU Radio FFT sink I made decision to change bit shift 3 to bit shift
2 as there was very (too) huge visible leap in FFT sink GUI. Now it
looks more natural.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

That stream format carries 504 x I+Q samples per 1024 USB frame.
Sample resolution is 8-bit signed. Default it when sampling rate
is 9Msps or over.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>