- 15 Mar, 2014 33 commits
-
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Steven J. Magnani authored
Fix module parameter descriptions mentioning default values that no longer match the code. Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Acked-by:
-
Dan Carpenter authored
qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure. On the one hand the caller assumes non-zero is success but on the other hand the caller also assumes that it returns an error code. I've fixed it to return zero on success and a negative error code on failure. This matches the documentation as well. [jejb: checkpatch fix] Fixes: e315cd28 ('[SCSI] qla2xxx: Code changes for qla data structure refactoring') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Dan Williams authored
isci is needlessly tying libata's hands by returning SAM_STAT_CHECK_CONDITION to some ata errors. Instead, prefer SAS_PROTO_RESPONSE to let libata (via sas_ata_task_done()) disposition the device-to-host fis. For example isci is triggering an HSM Violation where AHCI is showing a simple media error for the same bus condition: isci: ata7.00: failed command: READ VERIFY SECTOR(S) ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 res 01/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x3 (HSM violation) ahci: ata6.00: failed command: READ VERIFY SECTOR(S) ata6.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 res 51/40:01:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error) Note that the isci response matches this from sas_ata_task_done(): /* We saw a SAS error. Send a vague error. */ [..] dev->sata_dev.fis[3] = 0x04; /* status err */ dev->sata_dev.fis[2] = ATA_ERR; The end effect is that isci is needlessly triggering hard resets when they are not necessary. Reported-by:Xun Ni <xun.ni@intel.com> Tested-by:
Nelson Cheng <nelson.cheng@intel.com> Acked-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
libsas sometimes short circuits timeouts to force commands into error recovery. It is misleading to log that the command timed-out in sas_scsi_timed_out() when in fact it was just queued for error handling. It's also redundant in the case of a true timeout as libata eh will detect and report timeouts via it's AC_ERR_TIMEOUT facility. Given that some environments consider "timeout" errors to be indicative of impending device failure demote the sas_scsi_timed_out() timeout message to be disabled by default. This parallels ata_scsi_timed_out(). [jejb: checkpatch fix] Reported-by:
-
Armen Baloyan authored
Send aborts to the firmware via the request/response queue mechanism. Signed-off-by:
Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by:
-
Armen Baloyan authored
- Fix interpreting the wrong IOCB type for task management functions in the response path. - Merge the task management function handling for various adapters. Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Chad Dupuis authored
Allow for the capture of a firmware dump but have a sysfs node (allow_cna_fw_dump) to allow the feature to be enabled/disabled dynamically. The default is off. Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Armen Baloyan authored
[SCSI] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec. Signed-off-by:
-
Atul Deshmukh authored
[SCSI] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044. Signed-off-by:
Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by:
-
Armen Baloyan authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Tell the mid-layer that number of commands we can queue is the available resources we have minus a small amount for internal commands. Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Atul Deshmukh authored
Signed-off-by:
-
Armen Baloyan authored
[SCSI] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro for ISPFX00. Signed-off-by:
-
Armen Baloyan authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Eddie Wai authored
Old version: 2.4.1 New version: 2.4.2 Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
-
Eddie Wai authored
SCSI retry delay upon SAM_STAT_BUSY/_SET_FULL was not being handled in bnx2fc. This patch adds such handling by returning TARGET_BUSY to the SCSI ML for the corresponding LUN until the retry timer expires. Signed-off-by:
-
Eddie Wai authored
The problem has been identified to be a change in the scsi_remove_device path where a call to the pm_runtime_set_memalloc_noio was added when del_gendisk is called in this path. Note that the new pm routine attempts to cycle through all parent devices from the FC target device to set the memalloc_noio flag. Because of this new change, a dependency was created between the FC target device and the parent netdev device in the destroy path. In order to synchronized the destroy paths, bnx2fc has been modified to flush all destroy workqueues in the NETDEV_UNREGISTER return path. [ 4.123584] BUG: soft lockup - CPU#8 stuck for 22s! [kworker/8:3:8082] [ 4.123713] Call Trace: [ 4.123719] [<ffffffff815dfbe0>] klist_next+0x20/0xf0 [ 4.123725] [<ffffffff813e9220>] ? pm_save_wakeup_count+0x70/0x70 [ 4.123731] [<ffffffff813d9e4e>] device_for_each_child+0x4e/0x70 [ 4.123735] [<ffffffff813e9554>] pm_runtime_set_memalloc_noio+0x94/0xf0 [ 4.123740] [<ffffffff812d4d74>] del_gendisk+0x264/0x2a0 [ 4.123747] [<ffffffffa00c6dc9>] sd_remove+0x69/0xb0 [sd_mod] [ 4.123751] [<ffffffff813de24f>] __device_release_driver+0x7f/0xf0 [ 4.123754] [<ffffffff813de2e3>] device_release_driver+0x23/0x30 [ 4.123757] [<ffffffff813ddab4>] bus_remove_device+0xf4/0x170 [ 4.123760] [<ffffffff813da475>] device_del+0x135/0x1d0 [ 4.123765] [<ffffffff81411b75>] __scsi_remove_device+0xc5/0xd0 [ 4.123768] [<ffffffff81411ba6>] scsi_remove_device+0x26/0x40 [ 4.123770] [<ffffffff81411d40>] scsi_remove_target+0x160/0x210 [ 4.123775] [<ffffffffa0420e4c>] fc_rport_final_delete+0xac/0x1f0 [scsi_transport_fc] [ 4.123780] [<ffffffff810774ab>] process_one_work+0x17b/0x460 [ 4.123783] [<ffffffff8107825b>] worker_thread+0x11b/0x400 [ 4.123786] [<ffffffff81078140>] ? rescuer_thread+0x3e0/0x3e0 [ 4.123791] [<ffffffff8107e9c0>] kthread+0xc0/0xd0 [ 4.123794] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 [ 4.123798] [<ffffffff8160ceec>] ret_from_fork+0x7c/0xb0 [ 4.123801] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 Signed-off-by:
-
Viswas G authored
pm80xx_get_gsm_dump() was returning "1" in error case instead of negative error value. Signed-off-by:
Viswas G <Viswas.G@pmcs.com> Reviewed-by:
Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Viswas G authored
Removed redundant code snippets in pm8001_hwi.c and pm8001_ctl.c Signed-off-by:
-
- 12 Mar, 2014 1 commit
-
-
Ales Novak authored
If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by:Ales Novak <alnovak@suse.cz> Signed-off-by:
Thomas Abraham <tabraham@suse.com> Reviewed-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 10 Mar, 2014 5 commits
-
-
Giridhar Malavali authored
Cc: stable@vger.kernel.org Signed-off-by:
-
Lukasz Dorau authored
In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0 Call Trace: [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0 [<ffffffff81661c3f>] mutex_lock+0x1f/0x30 [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas] [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas] [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci] [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci] [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0 [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0 [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0 [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120 [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50 [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80 [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci] [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0 [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by:Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by:
-
Dan Williams authored
Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Cc: <stable@vger.kernel.org> Acked-by:
David Milburn <dmilburn@redhat.com> Reported-by:
-
Mike Christie authored
https://bugzilla.kernel.org/show_bug.cgi?id=67091 Cc: Jayamohan Kallickal <Jayamohan.Kallickal@emulex.com> Signed-off-by:
-
Chad Dupuis authored
This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 19 Feb, 2014 1 commit
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Lots of little small things, nothing too major: nouveau regression fixes, vmware fixes for the new hw support, memory leaks in error path fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm/radeon/ni: fix typo in dpm sq ramping setup drm/radeon/si: fix typo in dpm sq ramping setup drm/radeon: fix CP semaphores on CIK drm/radeon: delete a stray tab drm/radeon: fix display tiling setup on SI drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200 drm/radeon: fill in DRM_CAPs for cursor size drm: add DRM_CAPs for cursor size drm/radeon: unify bpc handling drm/ttm: Fix memory leak in ttm_agp_backend.c drm/ttm: declare 'struct device' in ttm_page_alloc.h drm/nouveau: fix TTM_PL_TT memtype on pre-nv50 drm/nv50/disp: use correct register to determine DP display bpp drm/nouveau/fb: use correct ram oclass for nv1a hardware drm/nv50/gr: add missing nv_error parameter priv drm/nouveau: fix ENG_RUNLIST register address drm/nv4c/bios: disallow retrieving from prom on nv4x igp's drm/nv4c/vga: decode register is in a different place on nv4x igp's drm/nv4c/mc: nv4x igp's have a different msi rearm register drm/nouveau: set irq_enabled manually ...
-
