- 03 Oct, 2017 2 commits
-
-
Martin K. Petersen authored
A user may lower the max_sectors_kb setting in sysfs to accommodate certain workloads. Previously we would always set the max I/O size to either the block layer default or the optional preferred I/O size reported by the device. Keep the current heuristics for the initial setting of max_sectors_kb. For subsequent invocations, only update the current queue limit if it exceeds the capabilities of the hardware. Cc: <stable@vger.kernel.org> Reported-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Martin K. Petersen authored
SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Cc: <stable@vger.kernel.org> Reported-by:
Bill Kuzeja <William.Kuzeja@stratus.com> Reported-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
- 28 Sep, 2017 2 commits
-
-
Martin Wilck authored
ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g. by Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16 commands with UNMAP bit set. It should not be treated as a path error. In general, it makes sense to assume that being write protected is a target rather than a path property. Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Commit 0e9973ed ("scsi: aacraid: Add periodic checks to see IOP reset status") changed the way driver checks if a reset succeeded. Now, after an IOP reset, aacraid immediately start polling a register to verify the reset is complete. This behavior cause regressions on the reset path in PowerPC (at least). Since the delay after the IOP reset was removed by the aforementioned patch, the fact driver just starts to read a register instantly after the reset was issued (by writing in another register) "corrupts" the reset procedure, which ends up failing all the time. The issue highly impacted kdump on PowerPC, since on kdump path we proactively issue a reset in adapter (through the reset_devices kernel parameter). This patch (re-)adds a delay right after IOP reset is issued. Empirically we measured that 3 seconds is enough, but for safety reasons we delay for 5s (and since it was 30s before, 5s is still a small amount). For reference, without this patch we observe the following messages on kdump kernel boot process: [ 76.294] aacraid 0003:01:00.0: IOP reset failed [ 76.294] aacraid 0003:01:00.0: ARC Reset attempt failed [ 86.524] aacraid 0003:01:00.0: adapter kernel panic'd ff. [ 86.524] aacraid 0003:01:00.0: Controller reset type is 3 [ 86.524] aacraid 0003:01:00.0: Issuing IOP reset [146.534] aacraid 0003:01:00.0: IOP reset failed [146.534] aacraid 0003:01:00.0: ARC Reset attempt failed Fixes: 0e9973ed ("scsi: aacraid: Add periodic checks to see IOP reset status") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Dave Carroll <david.carroll@microsemi.com> Signed-off-by:
-
- 26 Sep, 2017 1 commit
-
-
Hannes Reinecke authored
During failover there is a small race window between fc_remote_port_add() and fc_timeout_deleted_rport(); the latter drops the lock after setting the port to NOTPRESENT, so if fc_remote_port_add() is called right at that time it will fail to detect the existing rport and happily adding a new structure, causing rports to get registered twice. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
- 25 Sep, 2017 2 commits
-
-
Hannes Reinecke authored
When an rport is found in the bindings array there is no guarantee that it had been a target port, so we need to call fc_remote_port_rolechg() here to ensure the scsi_target_id is set correctly. Otherwise the port will never be scanned. Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Xin Long authored
ChunYu found a kernel crash by syzkaller: [ 651.617875] kasan: CONFIG_KASAN_INLINE enabled [ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 651.618731] general protection fault: 0000 [#1] SMP KASAN [ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32 [ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000 [ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590 [...] [ 651.627260] Call Trace: [ 651.629156] skb_release_all+0x4f/0x60 [ 651.629450] consume_skb+0x1a5/0x600 [ 651.630705] netlink_unicast+0x505/0x720 [ 651.632345] netlink_sendmsg+0xab2/0xe70 [ 651.633704] sock_sendmsg+0xcf/0x110 [ 651.633942] ___sys_sendmsg+0x833/0x980 [ 651.637117] __sys_sendmsg+0xf3/0x240 [ 651.638820] SyS_sendmsg+0x32/0x50 [ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2 It's caused by skb_shared_info at the end of sk_buff was overwritten by ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx. During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh), ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a new value to skb_shinfo(SKB)->nr_frags by ev->type. This patch is to fix it by checking nlh->nlmsg_len properly there to avoid over accessing sk_buff. Reported-by:
ChunYu Wang <chunwang@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
- 16 Sep, 2017 2 commits
-
-
Nikola Pajkovsky authored
Fix possible indexing array of bound for &aac->hba_map[bus][cid], where bus and cid boundary check happens later. Fixes: 0d643ff3 ("scsi: aacraid: use aac_tmf_callback for reset fib") Signed-off-by:
Nikola Pajkovsky <npajkovsky@suse.cz> Reviewed-by:
-
Stefano Brivio authored
Internal error codes happen to be positive, thus the PCI driver core won't treat them as failure, but we do. This would cause a crash later on as lpfc_pci_remove_one() is called (e.g. as shutdown function). Fixes: 6d368e53 ("[SCSI] lpfc 8.3.24: Add resource extent support") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
- 15 Sep, 2017 6 commits
-
-
Dave Carroll authored
The logic for supporting large drives was previously tied to 4Kn support for SmartIOC-2000. As SmartIOC-2000 does not support volumes using 4Kn drives, use the intended option flag AAC_OPT_NEW_COMM_64 to determine support for volumes greater than 2T. Cc: <stable@vger.kernel.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Hannes Reinecke authored
When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is returned; the remaining part will then contain stale kernel memory information. This patch zeroes out the entire table to avoid this issue. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Reinecke authored
Factor out sg_fill_request_table() for better readability. [mkp: typos, applied by hand] Signed-off-by:
-
Lukas Czerner authored
After series of changes around WRITE_SAME and UNMAP setup we ended up with leftover unnecessary condition. Remove it. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
A cleanup patch introduced a fatal typo from inbalanced curly braces: drivers/scsi/arm/acornscsi.c: In function 'acornscsi_host_reset': drivers/scsi/arm/acornscsi.c:2773:1: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement] drivers/scsi/arm/acornscsi.c:2795:12: error: invalid storage class for function 'acornscsi_show_info' static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance) The same patch incorrectly changed the argument type of the reset handler, as shown by this warning: drivers/scsi/arm/acornscsi.c:2888:27: error: initialization of 'int (*)(struct scsi_cmnd *)' from incompatible pointer type 'int (*)(struct Scsi_Host *)' [-Werror=incompatible-pointer-types] .eh_host_reset_handler = acornscsi_host_reset, This removes one the extraneous opening brace and reverts the argument type change. [mkp: fixed checkpatch complaint] Fixes: 74fa80ee ("scsi: acornscsi: move bus reset to host reset") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Christoph Hellwig authored
bsg-lib now embeddeds the job structure into the request, and req->special can't be used anymore. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 13 Sep, 2017 12 commits
-
-
Linus Torvalds authored
Another merge window, another MAINTAINERS file disaster. People have serious problems with the alphabet and sorting, and poor Jérôme Glisse and Radim Krčmář get their names mangled by locale issues, turning them into some mangled mess (probably others do too, but those two stood out when sorting things again). And we now have two copies of the same 'AS3645A LED FLASH CONTROLLER DRIVER' in the tree and in the MAINTAINERS file, but that's a separate issue - the duplication is real, and I left them as two entries for the same name. This does not try to sort the actual section pattern entries, although I may end up doing that later. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Most of the commits are trivial cleanup patches, while one commit is a significant fix for the race at ALSA sequencer that was spotted by syzkaller" * tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Cancel pending autoload work at unbinding device ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex() ALSA: asihpi: Kill BUG_ON() usages ALSA: core: Use %pS printk format for direct addresses ALSA: ymfpci: Use common error handling code in snd_ymfpci_create() ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe() ALSA: 6fire: Use common error handling code in usb6fire_chip_probe() ALSA: usx2y: Use common error handling code in submit_urbs() ALSA: us122l: Use common error handling code in us122l_create_card() ALSA: hdspm: Use common error handling code in snd_hdspm_probe() ALSA: rme9652: Use common code in hdsp_get_iobox_version() ALSA: maestro3: Use common error handling code in two functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A tiny update: one patch corrects a Kconfig problem with the shift of the SAS SMP code to BSG and the other removes a vestige of user space target mode" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_sas: select BLK_DEV_BSGLIB scsi: Remove Scsi_Host.uspace_req_q
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Small collection of fixes that would be nice to have in -rc1. This contains: - NVMe pull request form Christoph, mostly with fixes for nvme-pci, host memory buffer in particular. - Error handling fixup for cgwb_create(), in case allocation of 'wb' fails. From Christophe Jaillet. - Ensure that trace_block_getrq() gets the 'dev' in an appropriate fashion, to avoid a potential NULL deref. From Greg Thelen. - Regression fix for dm-mq with blk-mq, fixing a problem with stacking IO schedulers. From me. - string.h fixup, fixing an issue with memcpy_and_pad(). This original change came in through an NVMe dependency, which is why I'm including it here. From Martin Wilck. - Fix potential int overflow in __blkdev_sectors_to_bio_pages(), from Mikulas. - MBR enable fix for sed-opal, from Scott" * 'for-linus' of git://git.kernel.dk/linux-block: block: directly insert blk-mq request from blk_insert_cloned_request() mm/backing-dev.c: fix an error handling path in 'cgwb_create()' string.h: un-fortify memcpy_and_pad nvme-pci: implement the HMB entry number and size limitations nvme-pci: propagate (some) errors from host memory buffer setup nvme-pci: use appropriate initial chunk size for HMB allocation nvme-pci: fix host memory buffer allocation fallback nvme: fix lightnvm check block: fix integer overflow in __blkdev_sectors_to_bio_pages() block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabled block: tolerate tracing of NULL bio -
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A cleanup from Mauro that needed to wait for the media pull, plus a handful of other fixes that wandered in" * tag 'docs-4.14' of git://git.lwn.net/linux: kokr/memory-barriers.txt: Apply atomic_t.txt change kokr/doc: Update memory-barriers.txt for read-to-write dependencies docs-rst: don't require adjustbox anymore docs-rst: conf.py: only setup notice box colors if Sphinx < 1.6 docs-rst: conf.py: remove lscape from LaTeX preamble
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: "This fixes a regression (spotted by the Sandstorm.io folks) in the pid namespace handling introduced in 4.12. There's also a fix for honoring sync/dsync flags for pwritev2()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: getattr cleanup fuse: honor iocb sync flags on write fuse: allow server to run in different pid_ns
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: "This fixes d_ino correctness in readdir, which brings overlayfs on par with normal filesystems regarding inode number semantics, as long as all layers are on the same filesystem. There are also some bug fixes, one in particular (random ioctl's shouldn't be able to modify lower layers) that touches some vfs code, but of course no-op for non-overlay fs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix false positive ESTALE on lookup ovl: don't allow writing ioctl on lower layer ovl: fix relatime for directories vfs: add flags to d_real() ovl: cleanup d_real for negative ovl: constant d_ino for non-merge dirs ovl: constant d_ino across copy up ovl: fix readdir error value ovl: check snprintf return
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've mostly tuned f2fs to provide better user experience for Android. Especially, we've worked on atomic write feature again with SQLite community in order to support it officially. And we added or modified several facilities to analyze and enhance IO behaviors. Major changes include: - add app/fs io stat - add inode checksum feature - support project/journalled quota - enhance atomic write with new ioctl() which exposes feature set - enhance background gc/discard/fstrim flows with new gc_urgent mode - add F2FS_IOC_FS{GET,SET}XATTR - fix some quota flows" * tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits) f2fs: hurry up to issue discard after io interruption f2fs: fix to show correct discard_granularity in sysfs f2fs: detect dirty inode in evict_inode f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared f2fs: speed up gc_urgent mode with SSR f2fs: better to wait for fstrim completion f2fs: avoid race in between read xattr & write xattr f2fs: make get_lock_data_page to handle encrypted inode f2fs: use generic terms used for encrypted block management f2fs: introduce f2fs_encrypted_file for clean-up Revert "f2fs: add a new function get_ssr_cost" f2fs: constify super_operations f2fs: fix to wake up all sleeping flusher f2fs: avoid race in between atomic_read & atomic_inc f2fs: remove unneeded parameter of change_curseg f2fs: update i_flags correctly f2fs: don't check inode's checksum if it was dirtied or writebacked f2fs: don't need to update inode checksum for recovery f2fs: trigger fdatasync for non-atomic_write file f2fs: fix to avoid race in between aio and gc ... -
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The highlights include: - a large series of fixes and improvements to the snapshot-handling code (Zheng Yan) - individual read/write OSD requests passed down to libceph are now limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan) - encode MStatfs v2 message to allow for more accurate space usage reporting (Douglas Fuller) - switch to the new writeback error tracking infrastructure (Jeff Layton)" * tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits) ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap ceph: wait on writeback after writing snapshot data ceph: fix capsnap dirty pages accounting ceph: ignore wbc->range_{start,end} when write back snapshot data ceph: fix "range cyclic" mode writepages ceph: cleanup local variables in ceph_writepages_start() ceph: optimize pagevec iterating in ceph_writepages_start() ceph: make writepage_nounlock() invalidate page that beyonds EOF ceph: properly get capsnap's size in get_oldest_context() ceph: remove stale check in ceph_invalidatepage() ceph: queue cap snap only when snap realm's context changes ceph: handle race between vmtruncate and queuing cap snap ceph: fix message order check in handle_cap_export() ceph: fix NULL pointer dereference in ceph_flush_snaps() ceph: adjust 36 checks for NULL pointers ceph: delete an unnecessary return statement in update_dentry_lease() ceph: ENOMEM pr_err in __get_or_create_frag() is redundant ceph: check negative offsets in ceph_llseek() ceph: more accurate statfs ceph: properly set snap follows for cap reconnect ... -
Richard Wareing authored
If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da ("[XFS] write barrier support") Cc: <stable@vger.kernel.org> Signed-off-by:Richard Wareing <rwareing@fb.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
- 12 Sep, 2017 13 commits
-
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat
-
git://git.infradead.org/users/hch/uuidLinus Torvalds authored
Pull uuid updates from Christoph Hellwig: "Just a single conversion to the new UUID API for this merge window" * tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid: efi: switch to use new generic UUID API
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux updates from Paul Moore: "A relatively quiet period for SELinux, 11 patches with only two/three having any substantive changes. These noteworthy changes include another tweak to the NNP/nosuid handling, per-file labeling for cgroups, and an object class fix for AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or administrative updates (Stephen's email update explains the file explosion in the diffstat). Everything passes the selinux-testsuite" [ Also a couple of small patches from the security tree from Tetsuo Handa for Tomoyo and LSM cleanup. The separation of security policy updates wasn't all that clean - Linus ] * tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: constify nf_hook_ops selinux: allow per-file labeling for cgroupfs lsm_audit: update my email address selinux: update my email address MAINTAINERS: update the NetLabel and Labeled Networking information selinux: use GFP_NOWAIT in the AVC kmem_caches selinux: Generalize support for NNP/nosuid SELinux domain transitions selinux: genheaders should fail if too many permissions are defined selinux: update the selinux info in MAINTAINERS credits: update Paul Moore's info selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst LSM: Remove security_task_create() hook.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: dead code removal, plus a SME memory encryption fix on 32-bit kernels that crashed Xen guests" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Remove unused and undefined __generic_processor_info() declaration x86/mm: Make the SME mask a u64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three fixes: - fix a suspend/resume cpusets bug - fix a !CONFIG_NUMA_BALANCING bug - fix a kerneldoc warning" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix nuisance kernel-doc warning sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs sched/fair: Fix wake_affine_llc() balancing rules
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates from Ingo Molnar: "Perf tooling updates and fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB perf stat: Only auto-merge events that are PMU aliases perf test: Add test case for PERF_SAMPLE_PHYS_ADDR perf script: Support physical address perf mem: Support physical address perf sort: Add sort option for physical address perf tools: Support new sample type for physical address perf vendor events powerpc: Remove duplicate events perf intel-pt: Fix syntax in documentation of config option perf test powerpc: Fix 'Object code reading' test perf trace: Support syscall name globbing perf syscalltbl: Support glob matching on syscall names perf report: Calculate the average cycles of iterations
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "A sparse irq race/locking fix, and a MSI irq domains population fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Make sparse_irq_lock protect what it should protect genirq/msi: Fix populating multiple interrupts
-
Chao Yu authored
Once we encounter I/O interruption during issuing discards, we will delay long time before next round, but if system status is I/O idle during the time, it may loses opportunity to issue discards. So this patch changes to hurry up to issue discard after io interruption. Besides, this patch also fixes to issue discards accurately with assigned rate. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Fix below incorrect display when reading discard_granularity sysfs node. $ cat /sys/fs/f2fs/<device>/discard_granularity $ 16 $ echo 32 > /sys/fs/f2fs/<device>/discard_granularity $ cat /sys/fs/f2fs/<device>/discard_granularity $ 16 Signed-off-by:
-
Chao Yu authored
Add a bugon in f2fs_evict_inode to detect inconsistent status between inode cache and related node page cache. Signed-off-by:
-
Amir Goldstein authored
Commit b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up origin") verifies that the origin lower inode stored in the overlayfs inode matched the inode of a copy up origin dentry found by lookup. There is a false positive result in that check when lower fs does not support file handles and copy up origin cannot be followed by file handle at lookup time. The false negative happens when finding an overlay inode in cache on a copied up overlay dentry lookup. The overlay inode still 'remembers' the copy up origin inode, but the copy up origin dentry is not available for verification. Relax the check in case copy up origin dentry is not available. Fixes: b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up...") Cc: <stable@vger.kernel.org> # v4.13 Reported-by:
Jordi Pujol <jordipujolp@gmail.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
The refreshed argument isn't used by any caller, get rid of it. Use a helper for just updating the inode (no need to fill in a kstat). Signed-off-by: -
Miklos Szeredi authored
If the IOCB_DSYNC flag is set a sync is not being performed by fuse_file_write_iter. Honor IOCB_DSYNC/IOCB_SYNC by setting O_DYSNC/O_SYNC respectively in the flags filed of the write request. We don't need to sync data or metadata, since fuse_perform_write() does write-through and the filesystem is responsible for updating file times. Original patch by Vitaly Zolotusky. Reported-by:
Nate Clark <nate@neworld.us> Cc: Vitaly Zolotusky <vitaly@unitc.com>. Signed-off-by:
-
