- 26 Aug, 2024 31 commits
-
-
Jakub Kicinski authored
Simon Horman says: ==================== net: header and core spelling corrections This patchset addresses a number of spelling errors in comments in Networking files under include/, and files in net/core/. Spelling problems are as flagged by codespell. It aims to provide patches that can be accepted directly into net-next. And splits patches up based on maintainer boundaries: many things feed directly into net-next. This is a complex process and I apologise for any errors. I also plan to address, via separate patches, spelling errors in other files in the same directories, for files whose changes typically go through trees other than net-next (which feed into net-next). ==================== Link: https://patch.msgid.link/20240822-net-spell-v1-0-3a98971ce2d2@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
Correct spelling in net/core. As reported by codespell. Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822-net-spell-v1-13-3a98971ce2d2@kernel.orgSigned-off-by:
-
Simon Horman authored
Correct spelling in Networking headers. As reported by codespell. Signed-off-by:
-
Simon Horman authored
Correct spelling in x25.h As reported by codespell. Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Link: https://patch.msgid.link/20240822-net-spell-v1-11-3a98971ce2d2@kernel.orgSigned-off-by:
-
Simon Horman authored
Correct spelling in sctp.h and structs.h. As reported by codespell. Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20240822-net-spell-v1-10-3a98971ce2d2@kernel.orgSigned-off-by:
-
Simon Horman authored
Correct spelling in pkt_cls.h and red.h. As reported by codespell. Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Simon Horman authored
Correct spelling in NFC headers. As reported by codespell. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240822-net-spell-v1-8-3a98971ce2d2@kernel.orgSigned-off-by:
-
Simon Horman authored
Correct spelling in netlabel.h. As reported by codespell. Cc: Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Simon Horman authored
Correct spelling in if_rmnet.h As reported by codespell. Cc: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Link: https://patch.msgid.link/20240822-net-spell-v1-6-3a98971ce2d2@kernel.orgSigned-off-by:
-
Simon Horman authored
Correct spelling in bond_3ad.h and bond_alb.h. As reported by codespell. Cc: Jay Vosburgh <jv@jvosburgh.net> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Simon Horman authored
Correct spelling in ip_tunnels.h As reported by codespell. Cc: David Ahern <dsahern@kernel.org> Signed-off-by:
-
Simon Horman authored
Correct spelling in ip_tunnels.h As reported by codespell. Cc: David Ahern <dsahern@kernel.org> Signed-off-by:
-
Simon Horman authored
Correct spelling in iucv.h As reported by codespell. Cc: Alexandra Winter <wintera@linux.ibm.com> Cc: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by:
-
Simon Horman authored
Correct spelling in if_packet.h As reported by codespell. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240822-net-spell-v1-1-3a98971ce2d2@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
MD Danish Anwar says: ==================== Add support for ICSSG PA_STATS This series adds support for PA_STATS. Previously this series was a standalone patch adding documentation for PA_STATS in dt-bindings file ti,pruss.yaml. v1 https://lore.kernel.org/all/20240430121915.1561359-1-danishanwar@ti.com/ v2 https://lore.kernel.org/all/20240529115149.630273-1-danishanwar@ti.com/ v3 https://lore.kernel.org/all/20240625153319.795665-1-danishanwar@ti.com/ v4 https://lore.kernel.org/all/20240729113226.2905928-1-danishanwar@ti.com/ v5 https://lore.kernel.org/all/20240814092033.2984734-1-danishanwar@ti.com/ v6 https://lore.kernel.org/all/20240820091657.4068304-1-danishanwar@ti.com/ ==================== Link: https://patch.msgid.link/20240822122652.1071801-1-danishanwar@ti.comSigned-off-by:
-
MD Danish Anwar authored
Add support for dumping PA stats registers via ethtool. Firmware maintained stats are stored at PA Stats registers. Also modify emac_get_strings() API to use ethtool_puts(). This commit also maintains consistency between miig_stats and pa_stats by - renaming the array icssg_all_stats to icssg_all_miig_stats - renaming the structure icssg_stats to icssg_miig_stats - renaming ICSSG_STATS() to ICSSG_MIIG_STATS() - changing order of stats related data structures and arrays so that data structures of a certain stats type is clubbed together. Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240822122652.1071801-3-danishanwar@ti.comSigned-off-by:
-
MD Danish Anwar authored
Add documentation for pa-stats node which is syscon regmap for PA_STATS registers. This will be used to dump statistics maintained by ICSSG firmware. Reviewed-by:
Roger Quadros <rogerq@kernel.org> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== Add ALCD Support to Cable Testing Interface This patch series introduces support for Active Link Cable Diagnostics (ALCD) in the ethtool cable testing interface and the DP83TD510 PHY driver. Why ALCD? On a 10BaseT1L interface, TDR (Time Domain Reflectometry) is not possible if the link partner is active - TDR will fail in these cases because it requires interrupting the link. Since the link is active, we already know the cable is functioning, so instead of using TDR, we can use ALCD. ALCD lets us measure cable length without disrupting the active link, which is crucial in environments where network uptime is important. It provides a way to gather diagnostic data without the need for downtime. What's in this series: - Extended the ethtool cable testing interface to specify the source of diagnostic results (TDR or ALCD). - Updated the DP83TD510 PHY driver to use ALCD when the link is active, ensuring we can still get cable length info without dropping the connection. ==================== Link: https://patch.msgid.link/20240822120703.1393130-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
In industrial environments where 10BaseT1L PHYs are replacing existing field bus systems like CAN, it's often essential to retain the existing cable infrastructure. After installation, collecting metrics such as cable length is crucial for assessing the quality of the infrastructure. Traditionally, TDR (Time Domain Reflectometry) is used for this purpose. However, TDR requires interrupting the link, and if the link partner remains active, the TDR measurement will fail. Unlike multi-pair systems, where TDR can be attempted during the MDI-X switching window, 10BaseT1L systems face greater challenges. The TDR sequence on 10BaseT1L is longer and coincides with uninterrupted autonegotiation pulses, making TDR impossible when the link partner is active. The DP83TD510 PHY provides an alternative through ALCD (Active Link Cable Diagnostics), which allows for cable length measurement without disrupting an active link. Since a live link indicates no short or open cable states, ALCD can be used effectively to gather cable length information. Enhance the dp83td510 driver by: - Leveraging ALCD to measure cable length when the link is active. - Bypassing TDR when a link is detected, as ALCD provides the required information without disruption. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240822120703.1393130-4-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Enhance the ethtool cable test interface by introducing the ability to specify the source of the diagnostic information for cable test results. This is particularly useful for PHYs that offer multiple diagnostic methods, such as Time Domain Reflectometry (TDR) and Active Link Cable Diagnostic (ALCD). Key changes: - Added `ethnl_cable_test_result_with_src` and `ethnl_cable_test_fault_length_with_src` functions to allow specifying the information source when reporting cable test results. - Updated existing `ethnl_cable_test_result` and `ethnl_cable_test_fault_length` functions to use TDR as the default source, ensuring backward compatibility. - Modified the UAPI to support these new attributes, enabling drivers to provide more detailed diagnostic information. Signed-off-by:
-
Oleksij Rempel authored
Extend the ethtool netlink cable testing interface by adding support for specifying the source of cable testing results. This allows users to differentiate between results obtained through different diagnostic methods. For example, some TI 10BaseT1L PHYs provide two variants of cable diagnostics: Time Domain Reflectometry (TDR) and Active Link Cable Diagnostic (ALCD). By introducing `ETHTOOL_A_CABLE_RESULT_SRC` and `ETHTOOL_A_CABLE_FAULT_LENGTH_SRC` attributes, this update enables drivers to indicate whether the result was derived from TDR or ALCD, improving the clarity and utility of diagnostic information. Signed-off-by:
-
Breno Leitao authored
Adds a selftest that creates two virtual interfaces, assigns one to a new namespace, and assigns IP addresses to both. It listens on the destination interface using socat and configures a dynamic target on netconsole, pointing to the destination IP address. The test then checks if the message was received properly on the destination interface. Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.orgSigned-off-by:
-
Jakub Kicinski authored
Breno Leitao says: ==================== netconsole: Populate dynamic entry even if netpoll fails The current implementation of netconsole removes the entry and fails entirely if netpoll fails to initialize. This approach is suboptimal, as it prevents reconfiguration or re-enabling of the target through configfs. While this issue might seem minor if it were rare, it actually occurs frequently when the network module is configured as a loadable module. In such cases, the network is unavailable when netconsole initializes, causing netpoll to fail. This failure forces users to reconfigure the target from scratch, discarding any settings provided via the command line. The proposed change would keep the target available in configfs, albeit in a disabled state. This modification allows users to adjust settings or simply re-enable the target once the network module has loaded, providing a more flexible and user-friendly solution. v2: https://lore.kernel.org/20240819103616.2260006-1-leitao@debian.org v1: https://lore.kernel.org/20240809161935.3129104-1-leitao@debian.org ==================== Link: https://patch.msgid.link/20240822111051.179850-1-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
Currently, netconsole discards targets that fail during initialization, causing two issues: 1) Inconsistency between target list and configfs entries * user pass cmdline0, cmdline1. If cmdline0 fails, then cmdline1 becomes cmdline0 in configfs. 2) Inability to manage failed targets from userspace * If user pass a target that fails with netpoll (interface not loaded at netcons initialization time, such as interface is a module), then the target will not exist in the configfs, so, user cannot re-enable or modify it from userspace. Failed targets are now added to the target list and configfs, but remain disabled until manually enabled or reconfigured. This change does not change the behaviour if CONFIG_NETCONSOLE_DYNAMIC is not set. CC: Aijay Adams <aijay@meta.com> Signed-off-by: -
Breno Leitao authored
Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll structure (np) is left in a clean state if setup fails for any reason. This prevents carrying over misconfigured fields in case of partial setup success. Key changes: - np->dev is now set only after successful setup, ensuring it's always NULL if netpoll is not configured or if netpoll_setup() fails. - np->local_ip is zeroed if netpoll setup doesn't complete successfully. - Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states. - Reordered some operations in __netpoll_setup() for better logical flow. These changes improve the reliability of netpoll configuration, since it assures that the structure is fully initialized or totally unset. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Divya Koppera says: ==================== Adds support for lan887x phy Adds support for lan887x phy and accept autoneg configuration in phy driver only when feature is enabled in supported list. v2: https://lore.kernel.org/20240813181515.863208-1-divya.koppera@microchip.com v1: https://lore.kernel.org/20240808145916.26006-1-Divya.Koppera@microchip.com ==================== Link: https://patch.msgid.link/20240821055906.27717-1-Divya.Koppera@microchip.comSigned-off-by:
-
Divya Koppera authored
The LAN887x is a Single-Port Ethernet Physical Layer Transceiver compliant with the IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1) specifications. The device provides 100/1000 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable. It supports communication with an Ethernet MAC via standard RGMII/SGMII interfaces. LAN887x supports following features, - Events/Interrupts - LED/GPIO Operation - IEEE 1588 (PTP) - SQI - Sleep and Wakeup (TC10) - Cable Diagnostics First patch only supports 100Mbps and 1000Mbps force-mode. Reviewed-by:
Divya Koppera <divya.koppera@microchip.com> Link: https://patch.msgid.link/20240821055906.27717-3-Divya.Koppera@microchip.comSigned-off-by:
-
Divya Koppera authored
Adds support in phy library to accept autoneg configuration only when feature is enabled in supported list. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-08-23 We've added 10 non-merge commits during the last 15 day(s) which contain a total of 10 files changed, 222 insertions(+), 190 deletions(-). The main changes are: 1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case when long-lived sockets miss a chance to set additional callbacks if a sockops program was not attached early in their lifetime, from Alan Maguire. 2) Add a batch of BPF selftest improvements which fix a few bugs and add missing features to improve the test coverage of sockmap/sockhash, from Michal Luczaj. 3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie() which is part of the test_tcp_custom_syncookie BPF selftest, from Kuniyuki Iwashima. 4) Fix the flow_dissector BPF selftest which had a bug in IP header's tot_len calculation doing subtraction after htons() instead of inside htons(), from Asbjørn Sloth Tønnesen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c. selftests/bpf: Introduce __attribute__((cleanup)) in create_pair() selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected() selftests/bpf: Honour the sotype of af_unix redir tests selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible() selftests/bpf: Socket pair creation, cleanups selftests/bpf: Support more socket types in create_pair() selftests/bpf: Avoid subtraction after htons() in ipip tests selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags ==================== Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.orgSigned-off-by: -
Christophe JAILLET authored
Commit 5fbf57a9 ("net: netlink: remove the cb_mutex "injection" from netlink core") has removed the usage of the 'dump_cb_mutex' field from the struct netlink_sock. Remove the field itself now. It saves a few bytes in the structure. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
- 24 Aug, 2024 1 commit
-
-
Mina Almasry authored
When net devices propagate xdp configurations to slave devices, we will need to perform a memory provider check to ensure we're not binding xdp to a device using unreadable netmem. Currently the ->ndo_bpf calls in a few places. Adding checks to all these places would not be ideal. Refactor all the ->ndo_bpf calls into one place where we can add this check in the future. Suggested-by:
Mina Almasry <almasrymina@google.com> Signed-off-by:
-
- 23 Aug, 2024 8 commits
-
-
David S. Miller authored
Li Zetao says: ==================== net: Delete some redundant judgments This patchset aims to remove some unnecessary judgments and make the code more concise. In some network modules, rtnl_set_sk_err is used to record error information, but the err is repeatedly judged to be less than 0 on the error path. Deleted these redundant judgments. No functional change intended. ==================== Signed-off-by: -
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
Li Zetao <lizetao1@huawei.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
Li Zetao authored
The initial value of err is -ENOBUFS, and err is guaranteed to be less than 0 before all goto errout. Therefore, on the error path of errout, there is no need to repeatedly judge that err is less than 0, and delete redundant judgments to make the code more concise. Signed-off-by:
-
