- 26 Apr, 2024 13 commits
-
-
Matthew Brost authored
Lock all BOs used in gpuva ops and validate all BOs in a single step during the VM bind IOCTL. This help with the transition to making all gpuva ops in a VM bind IOCTL a single atomic job which is required for proper error handling. v2: - Better commit message (Oak) - s/op_lock/op_lock_and_prep, few other renames too (Oak) - Use DRM_EXEC_IGNORE_DUPLICATES flag in drm_exec_init (local testing) - Do not reserve slots in locking step (direction based on series from Thomas) v3: - Validate BO if is immediate set (Oak) Cc: Oak Zeng <oak.zeng@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Oak Zeng <oak.zeng@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240425045513.1913039-2-matthew.brost@intel.com
-
Lucas De Marchi authored
Contrary to i915, in xe ADL-N is kept as a different platform, not a subplatform of ADL-P. Since the display side doesn't need to differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called, just fixup the compat header to check for both P and N. Moving ADL-N to be a subplatform would be more complex as the firmware loading in xe only handles platforms, not subplatforms, as going forward the direction is to check on IP version rather than platforms/subplatforms. Fix warning when initializing display: xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH ------------[ cut here ]------------ xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P)) And wrong paths being taken on the display side. Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.comSigned-off-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Colin Ian King authored
There is a spelling mistake in a drm_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Michal Wajdeczko authored
The xe_gt_sriov_pf_init_early() and xe_gt_sriov_pf_init_hw() are ideal places to call per-GT PF service init and update functions. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240425143927.2265-2-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
On older platforms (12.00) the PF driver must explicitly unblock VF's modifications to the GGTT. On newer platforms this capability is enabled by default. Bspec: 49908, 53204 Signed-off-by:
-
Himal Prasad Ghimiray authored
The function xe_guc_submit_stop consistently returns 0 without an error state, prompting the caller to verify it, which is redundant. Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:
-
Himal Prasad Ghimiray authored
There is no change in functionality. Using the helper function defined within the driver for locking/unlocking the reservation object. Cc: Matthew Brost <matthew.brost@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Suggested-by:
-
Himal Prasad Ghimiray authored
There is no change in functionality. Using the helper function defined within the driver. -v2 Use xe_vm_unlock() (Ashutosh/Matt) -v3 Use xe_vm_unlock() for error label too (Matt) Reviewed-by:
Badal Nilawar <badal.nilawar@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Matthew Brost authored
Exec queue has replaced engine nomenclature. Signed-off-by:
-
Matthew Brost authored
Normalize the alignment for readability. v3: - Fix typo in commit (Himal) - Fix EXEC_QUEUE_STATE_WEDGED too (Himal) Signed-off-by:
-
Matthew Brost authored
Exec queue has replaced engine nomenclature. Signed-off-by:
-
Matthew Brost authored
Exec queue has replaced engine nomenclature. Signed-off-by:
-
Matthew Brost authored
Exec queue has replaced engine nomenclature. Signed-off-by:
-
- 25 Apr, 2024 6 commits
-
-
Matthew Brost authored
GuC submission_state.suspend is unused, delete it. Signed-off-by:
-
Matthew Auld authored
We flush the rebind worker during the vm close phase, however in places like preempt_fence_work_func() we seem to queue the rebind worker without first checking if the vm has already been closed. The concern here is the vm being closed with the worker flushed, but then being rearmed later, which looks like potential uaf, since there is no actual refcounting to track the queued worker. We can't take the vm->lock here in preempt_rebind_work_func() to first check if the vm is closed since that will deadlock, so instead flush the worker again when the vm refcount reaches zero. v2: - Grabbing vm->lock in the preempt worker creates a deadlock, so checking the closed state is tricky. Instead flush the worker when the refcount reaches zero. It should be impossible to queue the preempt worker without already holding vm ref. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by:
-
Matthew Auld authored
This reverts commit 5b259c0d. Cleanup here is good, however we need to able to flush a worker during vm destruction which might involve sleeping, so bring back the worker. Signed-off-by:
-
Matthew Auld authored
It is really easy to introduce subtle deadlocks in preempt_fence_work_func() since we operate on single global ordered-wq for signalling our preempt fences behind the scenes, so even though we signal a particular fence, everything in the callback should be in the fence critical section, since blocking in the callback will prevent other published fences from signalling. If we enlarge the fence critical section to cover the entire callback, then lockdep should be able to understand this better, and complain if we grab a sensitive lock like vm->lock, which is also held when waiting on preempt fences. Signed-off-by:
-
Michal Wajdeczko authored
Apart from the obvious spelling typo, use the correct values for infinity quantum/timeout settings (it's 0x0 instead of 0xFFFFFFFF). Signed-off-by:
-
Michal Wajdeczko authored
For debug purposes we might want to verify which registers values PF is sharing with VFs and to view which VF/PF ABI versions were negotiated by the VFs. Plug the 'print' functions already provided by the PF service code into our debugfs. Signed-off-by:
-
- 24 Apr, 2024 21 commits
-
-
Michal Wajdeczko authored
Although it's unlikely that drmm_mutex_init() will fail during driver initialization, however we shouldn't ignore this case. Signed-off-by:
-
Tejas Upadhyay authored
Workaround 14021567978 applies to RenderCS xe2 V3: - Cover xe2_hpg as its landed upstream now V2(MattR): - Move tuning to wa and apply to xe2 Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
We can use recently added str_plural() helper. Signed-off-by:
-
Rodrigo Vivi authored
So, the wedged mode can be selected per device at runtime, before the tests or before reproducing the issue. v2: - s/busted/wedged - some locking consistency v3: - remove mutex - toggle guc reset policy on any mode change Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Rodrigo Vivi authored
In many validation situations when debugging GPU Hangs, it is useful to preserve the GT situation from the moment that the timeout occurred. This patch introduces a module parameter that could be used on situations like this. If xe.wedged module parameter is set to 2, Xe will be declared wedged on every single execution timeout (a.k.a. GPU hang) right after devcoredump snapshot capture and without attempting any kind of GT reset and blocking entirely any kind of execution. v2: Really block gt_reset from guc side. (Lucas) s/wedged/busted (Lucas) v3: - s/busted/wedged - Really use global_flags (Dafna) - More robust timeout handling when wedging it. v4: A really robust clean exit done by Matt Brost. No more kernel warns on unbind. v5: Simplify error message (Lucas) Cc: Matthew Brost <matthew.brost@intel.com> Cc: Dafna Hirschfeld <dhirschfeld@habana.ai> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Himanshu Somaiya <himanshu.somaiya@intel.com> Reviewed-by: -
Rodrigo Vivi authored
Let's block the device upon any GuC load failure. But let's continue with the probe so guc logs can be read from the debugfs. v2: - s/wedged/busted - do not block probe or we lose guc_logs in debugfs (Matt) v3: - s/busted/wedged v4: Do not change __xe_guc_upload return. (Himal) Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: -
Rodrigo Vivi authored
Introduce a very simple 'wedged' state where any attempt to access the GPU is entirely blocked. On some critical cases, like on gt_reset failure, we need to block any other attempt to use the GPU. Otherwise we are at a risk of reaching cases that would force us to reboot the machine. So, when this cases are identified we corner and block any GPU access. No IOCTL and not even another GT reset should be attempted. The 'wedged' state in Xe is an end state with no way back. Only a device "re-probe" (unbind + bind) can restore the GPU access. v2: - s/wedged/busted (Lucas) - use unbind+bind instead of module reload (Lucas) - added more info on unbind operations and instruction on bug report - only print the message once. v3: - s/busted/wedged (Ashutosh, Tvrtko, Thomas) - don't assume user has sudo and tee available (Lucas) v4: - remove unnecessary cases around ct communication or migration. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: -
José Roberto de Souza authored
This registers contains important information that can help with debug of GPU hangs. While at it also fixing the double line jump at the end of engine registers for CCS engines. v2: - print other INSTDONE registers v3: - add for_each_geometry/compute_dss() v4: - print one slice_common_instdone per glice in DG2+ v5: - rename registers prefix from DG2 to XEHPG (Zhanjun) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240424140319.61651-3-jose.souza@intel.com
-
José Roberto de Souza authored
Some DSS can only be available for geometry while others can only be available for compute. So here adding helpers to loop only available DSS for given usage. User of this helper will come in the next patch. v2: - drop has_dss() Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:
-
José Roberto de Souza authored
A future patch will require gt and xe device structs, so here replacing class by hwe. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
GuC is silently clamping values of the execution quantum and preemption timeout KLVs to 100s. Perform explicit clamping on the driver side as later there is no way to read back values used by the firmware and we shouldn't mislead the user about actual values being used when we print them in dmesg or debugfs. Signed-off-by:
-
Michal Wajdeczko authored
GuC firmware specification says that maximum value for the execution quantum KLV is 100s and anything exceeding that will be clamped. The same limitation applies to the preemption timeout KLV. Signed-off-by:
-
Michal Wajdeczko authored
We already have functions to configure SR-IOV policies. Allow to tweak those policy settings over debugfs. Reviewed-by:
-
Michal Wajdeczko authored
We already have functions to control the VF. Allow to control the VF using debugfs. Reviewed-by:
-
Michal Wajdeczko authored
We already have functions to configure VF resources and to print actual provisioning details. Expose this functionality in debugfs to allow experiment with different settings or inspect details in case of unexpected issues with the provisioning. As debugfs attributes are per-VF, we use parent d_inode->i_private to store VFID, similarly how we did for per-GT attributes. Reviewed-by:
-
Michal Wajdeczko authored
Start with basic tests for VF/PF ABI version negotiation. As we treat all platforms in the same way, we can run the tests on one platform. More tests will likely come later. Reviewed-by:
-
Michal Wajdeczko authored
We already have mechanism that allows a VF driver to communicate with the PF driver, now add PF side handlers for VF2PF requests defined in version 1.0 of VF/PF GuC Relay ABI specification. The VF2PF_HANDSHAKE request must be used by the VF driver to negotiate the ABI version prior to sending any other request. We will reset any negotiated version later during FLR. The outcome of the VF2PF_QUERY_RUNTIME requests depends on actual platform, for legacy platforms used as SDV is provided as-is, for latest platforms it is preliminary, and might be changed. Signed-off-by:
-
Michal Wajdeczko authored
While we are not using these registers right now, they are part of some runtime register lists that PF driver share with VFs on some legacy platforms that we might want to support as SDV. Reviewed-by:
-
Michal Wajdeczko authored
Our MMIO accessing functions automatically adjust addresses for the media registers based on mmio.adj_limit and mmio.adj_offset logic. Move it to the separate helper to avoid code duplication and to allow using it by the upcoming changes to PF driver code. Signed-off-by:
-
Michal Wajdeczko authored
This initial GuC Relay ABI specification includes messages for ABI version negotiation and to query values of runtime/fuse registers. We will start handling those messages on the PF driver soon. Reviewed-by:
-
Thomas Hellström authored
The recent backmerge from drm-next to drm-xe-next brought with it some silent unexpected results. One code snippet was added twice and a partial revert had merge errors. Fix that up to reinstate the affected code as it was before the backmerge. v2: - Commit log message rewording (Lucas DeMarchi) Fixes: 79790b68 ("Merge drm/drm-next into drm-xe-next") Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
-
