The driver reads PCI subsystem ID from the PCI configuration register while it's
already stored by the PCI subsystem in the 'subsystem_device' field of 'struct
pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits)
  PM: Improve error code of pm_notifier_call_chain()
  PM: Add "RTC" to PM trace time stamps to avoid confusion
  PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
  PM / Suspend: Add .suspend_again() callback to suspend_ops
  PM / OPP: Introduce function to free cpufreq table
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  ...

* 'for-linus-core' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (38 commits)
  target: Bump version to v4.1.0-rc1-ml
  target: remove custom hex2bin() implementation
  target: fix typo Assoication -> Association
  target: Update QUEUE ALGORITHM MODIFIER control page default
  target: ->map_task_SG conversion to ->map_control_SG and ->map_data_SG
  target: Follow up core updates from AGrover and HCH (round 4)
  target: Eliminate usage of struct se_mem
  target: Pass 2nd param of transport_split_cdb by value
  target: Enforce 1 page max for control cdb buffer sizes
  target: Make all control CDBs scatter-gather
  target: Implement Block Device Characteristics VPD page
  target: Fix reporting of supported VPD pages
  target: Allow for built-in target modules
  tcm_fc: Convert to wake_up_process and schedule_timeout_interruptible
  tcm_fc: Makefile cleanups
  loopback: Fix memory leak in tcm_loop_make_scsi_hba()
  loopback: Remove duplicate scsi/scsi_tcq.h include
  loopback: off by one in tcm_loop_make_naa_tpg()
  target/iblock: Remove unused iblock_dev members
  target/iblock: Use request_queue->nr_request for se_device defaults
  ...

* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Fixup __this_cpu_xchg* operations

* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: separate out drain_workqueue() from destroy_workqueue()
  workqueue: remove cancel_rearming_delayed_work[queue]()

* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits)
  HID: fix support for Microsoft comfort mouse 4500
  HID: hid-multitouch: add one new multitouch device's VID/PID
  HID: prodikeys: remove a redundant forward declaration of struct pcmidi_snd
  HID: prodikeys: make needlessly global symbols static
  HID: emsff: properly handle emsff_init failure
  HID: ACRUX - add missing hid_hw_stop() in ax_probe() error path
  HID: fix horizontal wheel for ms comfort mouse 4500
  HID: uclogic: Add support for UC-Logic WP1062
  HID: wiimote: Add sysfs support to wiimote driver
  HID: wiimote: Cache wiimote led state
  HID: wiimote: Add wiimote led request
  HID: wiimote: Add wiimote input button parser
  HID: wiimote: Add wiimote event handler
  HID: wiimote: Add output queue for wiimote driver
  HID: wiimote: Add wiimote send function
  HID: wiimote: Synchronize wiimote input and hid event handling
  HID: wiimote: Register input device in wiimote hid driver
  HID: wiimote: Add wiimote device structure
  HID: wiimote: Register wiimote hid driver stub
  HID: wiimote: Add Nintendo Wii Remote driver stub
  ...

* 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  pci/of: Consolidate pci_bus_to_OF_node()
  pci/of: Consolidate pci_device_to_OF_node()
  x86/devicetree: Use generic PCI <-> OF matching
  microblaze/pci: Move the remains of pci_32.c to pci-common.c
  microblaze/pci: Remove powermac originated cruft
  pci/of: Match PCI devices to OF nodes dynamically

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  dt: include linux/errno.h in linux/of_address.h
  of/address: Add of_find_matching_node_by_address helper
  dt: remove extra xsysace platform_driver registration
  tty/serial: Add devicetree support for nVidia Tegra serial ports
  dt: add empty of_property_read_u32[_array] for non-dt
  dt: bindings: move SEC node under new crypto/
  dt: add helper function to read u32 arrays
  tty/serial: change of_serial to use new of_property_read_u32() api
  dt: add 'const' for of_property_read_string parameter **out_string
  dt: add helper functions to read u32 and string property values
  tty: of_serial: support for 32 bit accesses
  dt: document the of_serial bindings
  dt/platform: allow device name to be overridden
  drivers/amba: create devices from device tree
  dt: add of_platform_populate() for creating device from the device tree
  dt: Add default match table for bus ids

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/imx: add device tree probe support
  spi/imx: copy gpio number passed by platform data into driver private data
  spi/imx: use soc name in spi device type naming scheme
  spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4
  spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro
  spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro
  spi/imx: do not make copy of spi_imx_devtype_data
  spi/dw: Add spi number into spi irq desc
  spi/tegra: Use engineering names in DT compatible property
  spi/fsl_spi: fix CPM spi driver
  mach-s3c2410: remove unused spi-gpio.h file
  spi: remove obsolete spi-s3c24xx-gpio driver
  mach-gta2: remove unused spi-gpio.h include
  mach-qt2410: convert to spi_gpio
  mach-jive: convert to spi_gpio
  spi/pxa2xx: Remove unavailable ssp_type from documentation
  spi/bfin_spi: uninline fat queue funcs
  spi/bfin_spi: constify pin array
  spi/bfin_spi: use structs for accessing hardware regs
  spi/topcliff-pch: Support new device ML7223 IOH
  ...

Fix up trivial conflict in arch/arm/mach-ep93xx/Makefile

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits)
  gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
  mcp23s08: add i2c support
  mcp23s08: isolate spi specific parts
  mcp23s08: get rid of setup/teardown callbacks
  gpio/tegra: dt: add binding for gpio polarity
  mcp23s08: remove unused work queue
  gpio/da9052: remove a redundant assignment for gpio->da9052
  gpio/mxc: add device tree probe support
  ARM: mxc: use ARCH_NR_GPIOS to define gpio number
  gpio/mxc: get rid of the uses of cpu_is_mx()
  gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
  gpio: Move mpc5200 gpio driver to drivers/gpio
  GPIO: DA9052 GPIO module v3
  gpio/tegra: Use engineering names in DT compatible property
  of/gpio: Add new method for getting gpios under different property names
  gpio/dt: Refine GPIO device tree binding
  gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
  gpio/pca953x: Deprecate meaningless device-tree bindings
  gpio/pca953x: Remove dynamic platform data pointer
  gpio/pca953x: Fix IRQ support.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits)
  IB/qib: Defer HCA error events to tasklet
  mlx4_core: Bump the driver version to 1.0
  RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit()
  IB/mlx4: Support PMA counters for IBoE
  IB/mlx4: Use flow counters on IBoE ports
  IB/pma: Add include file for IBA performance counters definitions
  mlx4_core: Add network flow counters
  mlx4_core: Fix location of counter index in QP context struct
  mlx4_core: Read extended capabilities into the flags field
  mlx4_core: Extend capability flags to 64 bits
  IB/mlx4: Generate GID change events in IBoE code
  IB/core: Add GID change event
  RDMA/cma: Don't allow IPoIB port space for IBoE
  RDMA: Allow for NULL .modify_device() and .modify_port() methods
  IB/qib: Update active link width
  IB/qib: Fix potential deadlock with link down interrupt
  IB/qib: Add sysfs interface to read free contexts
  IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP
  IB/qib: Remove double define
  IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: document the sysfs ABIs
  firewire: cdev: ABI documentation enhancements
  firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing
  firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL
  firewire: ohci: skip soft reset retries after card ejection
  firewire: ohci: fix PHY reg access after card ejection
  firewire: ohci: add a comment on PHY reg access serialization
  firewire: ohci: reduce potential context_stop latency
  firewire: ohci: remove superfluous posted write flushes
  firewire: net: replacing deprecated __attribute__((packed)) with __packed

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1287 commits)
  icmp: Fix regression in nexthop resolution during replies.
  net: Fix ppc64 BPF JIT dependencies.
  acenic: include NET_SKB_PAD headroom to incoming skbs
  ixgbe: convert to ndo_fix_features
  ixgbe: only enable WoL for magic packet by default
  ixgbe: remove ifdef check for non-existent define
  ixgbe: Pass staterr instead of re-reading status and error bits from descriptor
  ixgbe: Move interrupt related values out of ring and into q_vector
  ixgbe: add structure for containing RX/TX rings to q_vector
  ixgbe: inline the ixgbe_maybe_stop_tx function
  ixgbe: Update ATR to use recorded TX queues instead of CPU for routing
  igb: Fix for DH89xxCC near end loopback test
  e1000: always call e1000_check_for_link() on e1000_ce4100 MACs.
  netxen: add fw version compatibility check
  be2net: request native mode each time the card is reset
  ipv4: Constrain UFO fragment sizes to multiples of 8 bytes
  virtio_net: Fix panic in virtnet_remove
  ipv6: make fragment identifications less predictable
  ipv6: unshare inetpeers
  can: make function can_get_bittiming static
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: Fix in/out emulation
  lguest: Fix translation count about wikipedia's cpuid page
  lguest: Fix three simple typos in comments
  lguest: update comments
  lguest: Simplify device initialization.
  lguest: don't rewrite vmcall instructions
  lguest: remove remaining vmcall
  lguest: use a special 1:1 linear pagetable mode until first switch.
  lguest: Do not exit on non-fatal errors

* 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.
  xen: tmem: self-ballooning and frontswap-selfshrinking
  xen: Add module alias to autoload backend drivers
  xen: Populate xenbus device attributes
  xen: Add __attribute__((format(printf... where appropriate
  xen: prepare tmem shim to handle frontswap
  xen: allow enable use of VGA console on dom0

* 'stable/pci.cleanups.v1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.
  xen/pci: Remove 'xen_allocate_pirq_gsi'.
  xen/pci: Retire unnecessary #ifdef CONFIG_ACPI
  xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the end
  xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.
  xen/pci: Use the xen_register_pirq for HVM and initial domain users
  xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.
  xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.
  xen/pci: Update comments and fix empty spaces.
  xen/pci: Shuffle code around.

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen:pvhvm: Modpost section mismatch fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (78 commits)
  mmc: MAINTAINERS: add myself as a tmio-mmc maintainer
  mmc: print debug messages for runtime PM actions
  mmc: fix runtime PM with -ENOSYS suspend case
  mmc: at91_mci: move register header from include/ to drivers/
  mmc: mxs-mmc: fix clock rate setting
  mmc: tmio: fix a deadlock
  mmc: tmio: fix a recently introduced bug in DMA code
  mmc: sh_mmcif: maximize power saving
  mmc: tmio: maximize power saving
  mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()
  mmc: omap_hsmmc: refactor duplicated code
  mmc: omap_hsmmc: fix a few bugs when setting the clock divisor
  mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  mmc: omap_hsmmc: move hardcoded frequency constants to defines
  mmc: omap_hsmmc: correct debug report error status mnemonics
  mmc: block: fixed NULL pointer dereference
  mmc: documentation of mmc non-blocking request usage and design.
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs: add size update tracepoint to IO completion
  xfs: convert AIL cursors to use struct list_head
  xfs: remove confusing ail cursor wrapper
  xfs: use a cursor for bulk AIL insertion
  xfs: failure mapping nfs fh to inode should return ESTALE
  xfs: Remove the second parameter to xfs_sb_count()
  xfs: remove the dead XFS_DABUF_DEBUG code
  xfs: remove leftovers of the old btree tracing code
  xfs: remove the dead QUOTADEBUG code
  xfs: remove the unused xfs_buf_delwri_sort function
  xfs: remove wrappers around b_iodone
  xfs: remove wrappers around b_fspriv
  xfs: add a proper transaction pointer to struct xfs_buf
  xfs: factor out xfs_da_grow_inode_int
  xfs: factor out xfs_dir2_leaf_find_stale
  xfs: cleanup struct xfs_dir2_free
  xfs: reshuffle dir2 headers
  xfs: start periodic workers later
  Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc"
  xfs: remove variables that serve no purpose in xfs_alloc_ag_vextent_exact()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: don't limit active work items
  dlm: use workqueue for callbacks
  dlm: remove deadlock debug print
  dlm: improve rsb searches
  dlm: keep lkbs in idr
  dlm: fix kmalloc args
  dlm: don't do pointless NULL check, use kzalloc and fix order of arguments
  dlm: dump address of unknown node
  dlm: use vmalloc for hash tables
  dlm: show addresses in configfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: ensure bio requests are not smaller than the hardware sectors
  hfsplus: Add additional range check to handle on-disk corruptions
  hfsplus: Add error propagation for hfsplus_ext_write_extent_locked
  hfsplus: add error checking for hfs_find_init()
  hfsplus: lift the 2TB size limit
  hfsplus: fix overflow in hfsplus_read_wrapper
  hfsplus: fix overflow in hfsplus_get_block
  hfsplus: assignments inside `if' condition clean-up

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: combine duplicated block freeing routines
  GFS2: Add S_NOSEC support
  GFS2: Automatically adjust glock min hold time
  GFS2: Cache dir hash table in a contiguous buffer

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: clarify the volume notification types' doc
  UBI: remove dead code
  UBI: dump stack when switching to R/O mode
  UBI: fix oops in error path
  UBI: switch debugging tests knobs to debugfs
  UBI: make it possible to use struct ubi_device in debug.h
  UBI: prepare debugging stuff to further debugfs conversion
  UBI: use debugfs for the extra checks knobs
  UBI: change the interface of a debugging check function

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (32 commits)
  MAINTAINERS: change e-mail of Adrian Hunter
  UBIFS: fix master node recovery
  UBIFS: improve power cut emulation testing
  UBIFS: rename recovery testing variables
  UBIFS: remove custom list of superblocks
  UBIFS: stop re-defining UBI operations
  UBIFS: switch to I/O helpers
  UBIFS: switch to ubifs_leb_write
  UBIFS: switch to ubifs_leb_read
  UBIFS: introduce more I/O helpers
  UBIFS: always print stacktrace when switching to R/O mode
  UBIFS: remove unused and unneeded debugging function
  UBIFS: add global debugfs knobs
  UBIFS: introduce debugfs helpers
  UBIFS: re-arrange debugging code a bit
  UBIFS: be more informative in failure mode
  UBIFS: switch self-check knobs to debugfs
  UBIFS: lessen amount of debugging check types
  UBIFS: introduce helper functions for debugging checks and tests
  UBIFS: amend debugging inode size check function prototype
  ...

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix DEBUG_SLAB warning
  slab: shrink sizeof(struct kmem_cache)
  slab: fix DEBUG_SLAB build
  SLUB: Fix missing <linux/stacktrace.h> include
  slub: reduce overhead of slub_debug
  slub: Add method to verify memory is not freed
  slub: Enable backtrace for create/delete points
  slab allocators: Provide generic description of alignment defines
  slab, slub, slob: Unify alignment definition
  slob/lockdep: Fix gfp flags passed to lockdep

With ib_qib options:

    options ib_qib krcvqs=1 pcie_caps=0x51 rcvhdrcnt=4096 singleport=1 ibmtu=4

a run of ib_write_bw -a yields the following:

    ------------------------------------------------------------------
     #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]
     1048576   5000           2910.64            229.80
    ------------------------------------------------------------------

The top cpu use in a profile is:

    CPU: Intel Architectural Perfmon, speed 2400.15 MHz (estimated)
    Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask
    of 0x00 (No unit mask) count 1002300
    Counted LLC_MISSES events (Last level cache demand requests from this core that
    missed the LLC) with a unit mask of 0x41 (No unit mask) count 10000
    samples  %        samples  %        app name                 symbol name
    15237    29.2642  964      17.1195  ib_qib.ko                qib_7322intr
    12320    23.6618  1040     18.4692  ib_qib.ko                handle_7322_errors
    4106      7.8860  0              0  vmlinux                  vsnprintf


Analysis of the stats, profile, the code, and the annotated profile indicate:
 - All of the overflow interrupts (one per packet overflow) are
   serviced on CPU0 with no mitigation on the frequency.
 - All of the receive interrupts are being serviced by CPU0.  (That is
   the way truescale.cmds statically allocates the kctx IRQs to CPU)
 - The code is spending all of its time servicing QIB_I_C_ERROR
   RcvEgrFullErr interrupts on CPU0, starving the packet receive
   processing.
 - The decode_err routine is very inefficient, using a printf variant
   to format a "%s" and continues to loop when the errs mask has been
   cleared.
 - Both qib_7322intr and handle_7322_errors read pci registers, which
   is very inefficient.

The fix does the following:
 - Adds a tasklet to service QIB_I_C_ERROR
 - Replaces the very inefficient scnprintf() with a memcpy().  A field
   is added to qib_hwerror_msgs to save the sizeof("string") at
   compile time so that a strlen is not needed during err_decode().
 - The most frequent errors (Overflows) are serviced first to exit the
   loop as early as possible.
 - The loop now exits as soon as the errs mask is clear rather than
   fruitlessly looping through the msp array.

With this fix the performance changes to:

    ------------------------------------------------------------------
     #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]
     1048576   5000           2990.64            2941.35
    ------------------------------------------------------------------

During testing of the error handling overflow patch, it was determined
that some CPU's were slower when servicing both overflow and receive
interrupts on CPU0 with different MSI interrupt vectors.

This patch adds an option (krcvq01_no_msi) to not use a dedicated MSI
interrupt for kctx's < 2 and to service them on the default interrupt.
For some CPUs, the cost of the interrupt enter/exit is more costly
than then the additional PCI read in the default handler.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Currently all bio requests are 512 bytes, which may fail for media
whose physical sector size is larger than this. Ensure these
requests are not smaller than the block device logical block size.

BugLink: http://bugs.launchpad.net/bugs/734883Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

'recoff' is read from disk and used for an argument to memcpy, so if
the value read from disk is larger than the page size, it result to
"general protection fault". This patch add additional range check for
the value, so that disk fuzz won't cause such fault.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

icmp_route_lookup() uses the wrong flow parameters if the reverse
session route lookup isn't used.

So do not commit to the re-decoded flow until we actually make a
final decision to use a real route saved in 'rt2'.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test-case:

	void *tfunc(void *arg)
	{
		execvp("true", NULL);
		return NULL;
	}

	int main(void)
	{
		int pid;

		if (fork()) {
			pthread_t t;

			kill(getpid(), SIGSTOP);

			pthread_create(&t, NULL, tfunc, NULL);

			for (;;)
				pause();
		}

		pid = getppid();
		assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);

		while (wait(NULL) > 0)
			ptrace(PTRACE_CONT, pid, 0,0);

		return 0;
	}

It is racy, exit_notify() does __wake_up_parent() too. But in the
likely case it triggers the problem: de_thread() does release_task()
and the old leader goes away without the notification, the tracer
sleeps in do_wait() without children/tracees.

Change de_thread() to do __wake_up_parent(traced_leader->parent).
Since it is already EXIT_DEAD we can do this without ptrace_unlink(),
EXIT_DEAD threads do not exist from do_wait's pov.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>

Add forgotten entry into the global blacklist.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch bumps the target core version to v4.1.0-rc1 now that we are
in sync with upstream lio-core-2.6.git/master
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch drops transport_asciihex_to_binaryhex() in favor of proper
hex2bin usage from include/linux/kernel.h:hex2bin()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Additionally this patch brings proper apply of the designator type.
However, the original code luckily has no bug, because the association
equals to 0.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Bottomley <jbottomley@parallels.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds the default 'Unrestricted reordering allowed' for SCSI
control mode page QUEUE ALGORITHM MODIFIER on a per se_device basis in
target_modesense_control() following spc4r23.  This includes a new
emuluate_rest_reord configfs attribute that currently (only) accepts
zero to signal 'Unrestricted reordering allowed' in control mode page
usage by the backend target device.
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>

This patch breaks up the ->map_task_SG() backend call into two seperate
->map_control_SG() and ->map_data_SG() in order to better address
IBLOCK and pSCSI.  IBLOCK only allocates bios for ->map_data_SG(), and
pSCSI will allocate a struct request for both cases.

This patch fixes incorrect usage of ->map_task_SG() for all se_cmd descriptors
in transport_generic_new_cmd() by moving the call into it's proper location
directly inside of transport_allocate_data_tasks()
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>