- 22 Oct, 2023 40 commits
-
-
Kent Overstreet authored
This will help narrow down which code is at fault when this happens. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Not doing so confuses copygc Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
It's not needed anymore since we can now write to buckets before updating the alloc btree. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
This also consolidates the various checks in bch2_mark_pointer() and bch2_trans_mark_pointer(). Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
There was a bad interaction with bch2_btree_iter_set_pos_same_leaf(), which can leave a btree node locked that is just outside iter->pos, breaking the lock ordering checks in __bch2_btree_node_lock(). Ideally we should get rid of this corner case, but for now fix it locally with verbose comments. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Intented to help debug deadlocks, since we can't use lockdep to check btree node lock ordering. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Before we were setting features after allocating btree nodes, which meant we were using the old btree pointer format. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Reflink might be buggy, so we're adding an option so users can help bisect what's going on. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Now that interior btree updates are fully transactional, we don't need to write out alloc info in a loop. However, interior btree updates do put more things in the journal, so we still need a loop in the RO sequence. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
This is to break a circular dependency in the shutdown path. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
this fixes a lockdep splat Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
We now update the alloc info (bucket sector counts) atomically with journalling the update to the interior btree nodes, and we also set new btree roots atomically with the journalled part of the btree update. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
When updates to interior nodes started being journalled, that meant that after an unclean shutdown, until journal replay is done we can't walk the btree without overlaying the updates from the journal. The initial btree gc was changed to walk the btree overlaying keys from the journal - but bch2_alloc_read() and bch2_stripes_read() were missed. Major whoops... Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Previously, there was at least one error path where we could mark the filesystem clean when we hadn't sucessfully written out alloc info. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
This fixes a null ptr deref. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Yuxuan Shui authored
When a bkey_on_stack is passed to bch_read_indirect_extent, there is no guarantee that it will be big enough to hold the bkey. And bch_read_indirect_extent is not aware of bkey_on_stack to call realloc on it. This cause a stack corruption. This commit makes bch_read_indirect_extent aware of bkey_on_stack so it can call realloc when appropriate. Tested-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
vmalloc() and vmap() don't take GFP_NOFS - this should be pushed further up the IO path, but for now just doing the simple fix. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
We were marking the end of where we could insert incorrectly for indirect extents. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
We were returning -EINTR because we were failing to retry the btree transaction. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
writes running out of a workqueue (via dio path) could block and prevent other writes from calling bch2_write_index() and completing. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
- Always pass BTREE_INSERT_USE_RESERVE when writing alloc btree keys - Don't strand buckest on the copygc freelist until after recovery is done and we're starting copygc. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
When they were converted to kvpmalloc pools they weren't converted to pass the actual size of the allocation. Oops. Also, validate the real length in the zstd decompression path. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
In __bio_map_or_bounce(), the check for if the bio is physically contiguous is improved; it's now more readable and handles multi page but contiguous bios. Also when decompressing, we were doing a redundant memcpy in the case where we were able to use vmap to map a bio contigiously. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Deadlock on shutdown: btree_update_nodes_written() unblocks btree nodes from being written; after doing so, it has to check if they were marked as needing to be written and if so kick off those writes - if that doesn't happen, we'll never release journal pins and shutdown will get stuck when flushing the journal. There was an error path where this didn't happen, because in the error path we don't actually want those btree nodes write to happen; however, we still have to kick off the write path so the journal pins get released. The btree write path checks if we're in a journal error state and doesn't do the actual write if we are. Also - there was another deadlock because btree_update_nodes_written() was taking the btree update off of the unwritten_list too soon - before getting a journal reservation, which could fail and have to be retried. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
We also can't be blocking on btree node write locks while holding btree_interior_update_lock. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
the bcachefs io path in io.c can't bounce writes larger than that. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
This is unfortunately really fragile - hopefully we'll be able to think of a new approach at some point. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
btree_node_lock_increment() was incorrectly skipping over the current iter when checking if we should increment a node we already have locked. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
peek_slot() shouldn't return -EINTR when there's only a single live iterator, but that's tricky to guarantee - we seem to be returning -EINTR when we shouldn't, but it's easy enough to handle in the caller. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
In the write path, we were calling bch2_bkey_ops.compat() in the wrong place. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Transaction restart tracing should probably be overhaulled at some point. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
2/3rds performs a lot better than 3/4ths on the tested workloda, leading to significanly fewer btree node compactions. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-