- 12 Apr, 2016 40 commits
-
-
Seth Forshee authored
commit 744742d6 upstream. The 'reqs' member of fuse_io_priv serves two purposes. First is to track the number of oustanding async requests to the server and to signal that the io request is completed. The second is to be a reference count on the structure to know when it can be freed. For sync io requests these purposes can be at odds. fuse_direct_IO() wants to block until the request is done, and since the signal is sent when 'reqs' reaches 0 it cannot keep a reference to the object. Yet it needs to use the object after the userspace server has completed processing requests. This leads to some handshaking and special casing that it needlessly complicated and responsible for at least one race condition. It's much cleaner and safer to maintain a separate reference count for the object lifecycle and to let 'reqs' just be a count of outstanding requests to the userspace server. Then we can know for sure when it is safe to free the object without any handshaking or special cases. The catch here is that most of the time these objects are stack allocated and should not be freed. Initializing these objects with a single reference that is never released prevents accidental attempts to free the objects. Fixes: 9d5722b7 ("fuse: handle synchronous iocbs internally") Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Doebbelin authored
commit 7cabc61e upstream. There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an iocb that could have been freed if async io has already completed. The fix in this case is simple and obvious: cache the result before starting io. It was discovered by KASan: kernel: ================================================================== kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390 Signed-off-by:
Robert Doebbelin <robert@quobyte.com> Signed-off-by:
-
Ming Lei authored
commit fafcde3a upstream. Inside multipath_make_request(), multipath maps the incoming bio into low level device's bio, but it is totally wrong to copy the bio into mapped bio via '*mapped_bio = *bio'. For example, .__bi_remaining is kept in the copy, especially if the incoming bio is chained to via bio splitting, so .bi_end_io can't be called for the mapped bio at all in the completing path in this kind of situation. This patch fixes the issue by using clone style. Reported-and-tested-by:
Andrea Righi <righi.andrea@gmail.com> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
NeilBrown authored
commit 550da24f upstream. break_stripe_batch_list breaks up a batch and copies some flags from the batch head to the members, preserving others. It doesn't preserve or copy STRIPE_PREREAD_ACTIVE. This is not normally a problem as STRIPE_PREREAD_ACTIVE is cleared when a stripe_head is added to a batch, and is not set on stripe_heads already in a batch. However there is no locking to ensure one thread doesn't set the flag after it has just been cleared in another. This does occasionally happen. md/raid5 maintains a count of the number of stripe_heads with STRIPE_PREREAD_ACTIVE set: conf->preread_active_stripes. When break_stripe_batch_list clears STRIPE_PREREAD_ACTIVE inadvertently this could becomes incorrect and will never again return to zero. md/raid5 delays the handling of some stripe_heads until preread_active_stripes becomes zero. So when the above mention race happens, those stripe_heads become blocked and never progress, resulting is write to the array handing. So: change break_stripe_batch_list to preserve STRIPE_PREREAD_ACTIVE in the members of a batch. URL: https://bugzilla.kernel.org/show_bug.cgi?id=108741 URL: https://bugzilla.redhat.com/show_bug.cgi?id=1258153 URL: http://thread.gmane.org/5649C0E9.2030204@zoner.cz Reported-by: Martin Svec <martin.svec@zoner.cz> (and others) Tested-by:
Tom Weber <linux@junkyard.4t2.com> Fixes: 1b956f7a ("md/raid5: be more selective about distributing flags across batch.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Shaohua Li authored
commit 23ddba80 upstream. This is the raid10 counterpart of the bug fixed by Nate (raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang) Fixes: 95af587e(md/raid10: ensure device failure recorded before write request returns) Cc: Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
-
Shaohua Li authored
commit 6ab2a4b8 upstream. Revert commit e9e4c377(md/raid5: per hash value and exclusive wait_for_stripe) The problem is raid5_get_active_stripe waits on conf->wait_for_stripe[hash]. Assume hash is 0. My test release stripes in this order: - release all stripes with hash 0 - raid5_get_active_stripe still sleeps since active_stripes > max_nr_stripes * 3 / 4 - release all stripes with hash other than 0. active_stripes becomes 0 - raid5_get_active_stripe still sleeps, since nobody wakes up wait_for_stripe[0] The system live locks. The problem is active_stripes isn't a per-hash count. Revert the patch makes the live lock go away. Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Signed-off-by:
-
Shaohua Li authored
commit 27a353c0 upstream. check_reshape() is called from raid5d thread. raid5d thread shouldn't call mddev_suspend(), because mddev_suspend() waits for all IO finish but IO is handled in raid5d thread, we could easily deadlock here. This issue is introduced by 738a2738 ("md/raid5: fix allocation of 'scribble' array.") Reported-and-tested-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by:
-
Jes Sorensen authored
commit e7597e69 upstream. 'max_discard_sectors' is in sectors, while 'stripe' is in bytes. This fixes the problem where DISCARD would get disabled on some larger RAID5 configurations (6 or more drives in my testing), while it worked as expected with smaller configurations. Fixes: 620125f2 ("MD: raid5 trim support") Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Nate Dailey authored
commit ccfc7bf1 upstream. If raid1d is handling a mix of read and write errors, handle_read_error's call to freeze_array can get stuck. This can happen because, though the bio_end_io_list is initially drained, writes can be added to it via handle_write_finished as the retry_list is processed. These writes contribute to nr_pending but are not included in nr_queued. If a later entry on the retry_list triggers a call to handle_read_error, freeze array hangs waiting for nr_pending == nr_queued+extra. The writes on the bio_end_io_list aren't included in nr_queued so the condition will never be satisfied. To prevent the hang, include bio_end_io_list writes in nr_queued. There's probably a better way to handle decrementing nr_queued, but this seemed like the safest way to avoid breaking surrounding code. I'm happy to supply the script I used to repro this hang. Fixes: 55ce74d4(md/raid1: ensure device failure recorded before write request returns.) Signed-off-by:
Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
-
Mateusz Guzik authored
commit 2e83b79b upstream. This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Nikolay Borisov authored
commit ab73ef46 upstream. When dqget() in __dquot_initialize() fails e.g. due to IO error, __dquot_initialize() will pass an array of uninitialized pointers to dqput_all() and thus can lead to deference of random data. Fix the problem by properly initializing the array. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vineet Gupta authored
commit 2a41b6dc upstream. commit 80f42084 removed the ARC bitops microoptimization but failed to prune the comments to same effect Fixes: 80f42084 ("ARC: Make ARC bitops "safer" (add anti-optimization)") Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Lada Trimasova authored
commit f778cc65 upstream. read{l,w}() write{l,w}() primitives should use le{16,32}_to_cpu() and cpu_to_le{16,32}() respectively to ensure device registers are read correctly in Big Endian CPU configuration. Per Arnd Bergmann | Most drivers using readl() or readl_relaxed() expect those to perform byte | swaps on big-endian architectures, as the registers tend to be fixed endian This was needed for getting UART to work correctly on a Big Endian ARC. The ARC accessors originally were fine, and the bug got introduced inadventently by commit b8a03302 ("ARCv2: barriers") Fixes: b8a03302 ("ARCv2: barriers") Link: http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Lada Trimasova <ltrimas@synopsys.com> [vgupta: beefed up changelog, added Fixes/stable tags] Signed-off-by:
-
Alexey Brodkin authored
commit 667a490b upstream. Commit e34d6569 ("stmmac: create of compatible mdio bus for stmmac driver") broke DW GMAC functionality on ARC AXS10x boards: That's what happens on eth0 up: --------------------------->8------------------------ | libphy: PHY stmmac-0:ffffffff not found | eth0: Could not attach to PHY | stmmac_open: Cannot attach to PHY (error: -19) --------------------------->8------------------------ Simplest solution is to add PHY description in board's .dts. And so we do here. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh@kernel.org> Cc: Phil Reid <preid@electromag.com.au> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Max Filippov authored
commit 7de7ac78 upstream. There are XCHAL_NUM_DBREAK registers, clear them all. This also fixes cryptic assembler error message with binutils 2.25 when XCHAL_NUM_DBREAK is 0: as: out of memory allocating 18446744073709551575 bytes after a total of 495616 bytes Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit a67cc9aa upstream. Disabling pagefault makes little sense there, preemption disabling is what was meant. Signed-off-by:
-
Max Filippov authored
commit 362014c8 upstream. Simulator stdin may be connected to a file, when its end is reached kernel hangs in infinite loop inside rs_poll, because simc_poll always signals that descriptor 0 is readable and simc_read always returns 0. Check simc_read return value and exit loop if it's not positive. Also don't rewind polling timer if it's zero. Signed-off-by:
-
Rabin Vincent authored
commit d6785d91 upstream. Running the following command: busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null with any tracing enabled pretty very quickly leads to various NULL pointer dereferences and VM BUG_ON()s, such as these: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) kernel BUG at include/linux/mm.h:367! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89 (busybox's cat uses sendfile(2), unlike the coreutils version) This is because tracing_splice_read_pipe() can call splice_to_pipe() with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and we fill the page pointers and the other fields of the pipe_buffers with garbage. All other callers of splice_to_pipe() avoid calling it when nr_pages == 0, and we could make tracing_splice_read_pipe() do that too, but it seems reasonable to have splice_to_page() handle this condition gracefully. Signed-off-by:
Rabin Vincent <rabin@rab.in> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dmitry V. Levin authored
commit 5f8d498d upstream. Explicitly check show_devname method return code and bail out in case of an error. This fixes regression introduced by commit 9d4d6574. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Vinayak Menon authored
commit e53b50c0 upstream. early_init_dt_alloc_reserved_memory_arch passes end as 0 to __memblock_alloc_base, when limits are not specified. But __memblock_alloc_base takes end value of 0 as MEMBLOCK_ALLOC_ACCESSIBLE and limits the end to memblock.current_limit. This results in regions never being placed in HIGHMEM area, for e.g. CMA. Let __memblock_alloc_base allocate from anywhere in memory if limits are not specified. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hante Meuleman authored
commit 19c8f421 upstream. New generation devices have firmware which has more than 256 flowrings. E.g. following debugging message comes from 14e4:4365 BCM4366: [ 194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264 At various code places (related to flowrings) we were using u8 which could lead to storing wrong number or infinite loops when indexing with this type. This issue was quite easy to spot in brcmf_flowring_detach where it led to infinite loop e.g. on failed initialization. This patch switches code to proper types and increases the maximum number of supported flowrings to 512. Originally this change was sent in September 2015, but back it was causing a regression on BCM43602 resulting in: Unable to handle kernel NULL pointer dereference at virtual address ... The reason for this regression was missing update (s/u8/u16) of struct brcmf_flowring_ring. This problem was handled in 9f64df94 ("brcmfmac: Fix bug in flowring management."). Starting with that it's safe to apply this original patch as it doesn't cause a regression anymore. This patch fixes an infinite loop on BCM4366 which is supported since 4.4 so it makes sense to apply it to stable 4.4+. Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Dmitri Epshtein authored
commit 928b6519 upstream. Function eth_prepare_mac_addr_change() is called as part of MAC address change. This function check if interface is running. To enable change MAC address when interface is running: IFF_LIVE_ADDR_CHANGE flag must be set to dev->priv_flags field Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tejun Heo authored
commit 2b021cbf upstream. Before 2e91fa7f ("cgroup: keep zombies associated with their original cgroups"), all dead tasks were associated with init_css_set. If a zombie task is requested for migration, while migration prep operations would still be performed on init_css_set, the actual migration would ignore zombie tasks. As init_css_set is always valid, this worked fine. However, after 2e91fa7f, zombie tasks stay with the css_set it was associated with at the time of death. Let's say a task T associated with cgroup A on hierarchy H-1 and cgroup B on hiearchy H-2. After T becomes a zombie, it would still remain associated with A and B. If A only contains zombie tasks, it can be removed. On removal, A gets marked offline but stays pinned until all zombies are drained. At this point, if migration is initiated on T to a cgroup C on hierarchy H-2, migration path would try to prepare T's css_set for migration and trigger the following. WARNING: CPU: 0 PID: 1576 at kernel/cgroup.c:474 cgroup_get+0x121/0x160() CPU: 0 PID: 1576 Comm: bash Not tainted 4.4.0-work+ #289 ... Call Trace: [<ffffffff8127e63c>] dump_stack+0x4e/0x82 [<ffffffff810445e8>] warn_slowpath_common+0x78/0xb0 [<ffffffff810446d5>] warn_slowpath_null+0x15/0x20 [<ffffffff810c33e1>] cgroup_get+0x121/0x160 [<ffffffff810c349b>] link_css_set+0x7b/0x90 [<ffffffff810c4fbc>] find_css_set+0x3bc/0x5e0 [<ffffffff810c5269>] cgroup_migrate_prepare_dst+0x89/0x1f0 [<ffffffff810c7547>] cgroup_attach_task+0x157/0x230 [<ffffffff810c7a17>] __cgroup_procs_write+0x2b7/0x470 [<ffffffff810c7bdc>] cgroup_tasks_write+0xc/0x10 [<ffffffff810c4790>] cgroup_file_write+0x30/0x1b0 [<ffffffff811c68fc>] kernfs_fop_write+0x13c/0x180 [<ffffffff81151673>] __vfs_write+0x23/0xe0 [<ffffffff81152494>] vfs_write+0xa4/0x1a0 [<ffffffff811532d4>] SyS_write+0x44/0xa0 [<ffffffff814af2d7>] entry_SYSCALL_64_fastpath+0x12/0x6f It doesn't make sense to prepare migration for css_sets pointing to dead cgroups as they are guaranteed to contain only zombies which are ignored later during migration. This patch makes cgroup destruction path mark all affected css_sets as dead and updates the migration path to ignore them during preparation. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 2e91fa7f ("cgroup: keep zombies associated with their original cgroups") Signed-off-by:
-
Johan Hedberg authored
commit 6a0e7807 upstream. The Add Advertising command handler does the appropriate checks for the AD and Scan Response data, however fails to take into account the general length of the mgmt command itself, which could lead to potential buffer overflows. This patch adds the necessary check that the mgmt command length is consistent with the given ad and scan_rsp lengths. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit 28c971d8 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 10e7ac22 upstream. Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up watchdog/rc32434_wdt to do return copy_to_user(...)) ? -EFAULT : 0; instead. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Joshua Hunt authored
commit a1ee1932 upstream. While working on a script to restore all sysctl params before a series of tests I found that writing any value into the /proc/sys/kernel/{nmi_watchdog,soft_watchdog,watchdog,watchdog_thresh} causes them to call proc_watchdog_update(). NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. There doesn't appear to be a reason for doing this work every time a write occurs, so only do it when the values change. Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
Don Zickus <dzickus@redhat.com> Reviewed-by:
Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Aaro Koskinen authored
commit 4c11e554 upstream. Commit 1f330c32 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use __ioread32_copy() instead of open-coding") switched to use a generic copy function, but failed to notice that the header pointer is updated between the two copies, resulting in bogus data being copied in the latter one. Fix by keeping the old header pointer. The patch fixes totally broken networking on WRT54GL router (both LAN and WLAN interfaces fail to probe). Fixes: 1f330c32 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use __ioread32_copy() instead of open-coding") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Luis R. Rodriguez authored
commit b0f84ac3 upstream. All architectures now need ioremap_uc(), ia64 seems defines this already through its ioremap_nocache() and it already ensures it *only* uses UC. This is needed since v4.3 to complete an allyesconfig compile on ia64, there were others archs that needed this, and this one seems to have fallen through the cracks. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Acked-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Johannes Weiner authored
commit b6e6edcf upstream. Setting the original memory.limit_in_bytes hardlimit is subject to a race condition when the desired value is below the current usage. The code tries a few times to first reclaim and then see if the usage has dropped to where we would like it to be, but there is no locking, and the workload is free to continue making new charges up to the old limit. Thus, attempting to shrink a workload relies on pure luck and hope that the workload happens to cooperate. To fix this in the cgroup2 memory.max knob, do it the other way round: set the limit first, then try enforcement. And if reclaim is not able to succeed, trigger OOM kills in the group. Keep going until the new limit is met, we run out of OOM victims and there's only unreclaimable memory left, or the task writing to memory.max is killed. This allows users to shrink groups reliably, and the behavior is consistent with what happens when new charges are attempted in excess of memory.max. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Johannes Weiner authored
commit 588083bb upstream. When setting memory.high below usage, nothing happens until the next charge comes along, and then it will only reclaim its own charge and not the now potentially huge excess of the new memory.high. This can cause groups to stay in excess of their memory.high indefinitely. To fix that, when shrinking memory.high, kick off a reclaim cycle that goes after the delta. Signed-off-by:
-
Eric Wheeler authored
commit f8b11260 upstream. When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by:
Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by:
-
Eric Wheeler authored
commit 07cc6ef8 upstream. The bch_writeback_thread might BUG_ON in read_dirty() if dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed its related initialization. This patch downs the dc->writeback_lock until after initialization is complete, thus preventing bch_writeback_thread from proceeding prematurely. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453Signed-off-by:
Marc MERLIN <marc@merlins.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Eric Wheeler authored
commit 9b299728 upstream. Fix null pointer dereference by changing register_cache() to return an int instead of being void. This allows it to return -ENOMEM or -ENODEV and enables upper layers to handle the OOM case without NULL pointer issues. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521 Fixes this error: gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register bcache: register_cache() error opening sdh2: cannot allocate memory BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8 IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] PGD 120dff067 PUD 1119a3067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: veth ip6table_filter ip6_tables (...) CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 Workqueue: events cache_set_flush [bcache] task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000 RIP: 0010:[<ffffffffc05a7e8d>] [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] Signed-off-by:
-
Bart Van Assche authored
commit 51093254 upstream. Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f5748 ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 5e4298be upstream. Avoid that discard requests with size => PAGE_SIZE fail with -EIO. Refuse discard requests if the discard size is not a multiple of the page size. Fixes: 2dbe5495 ("brd: Refuse improperly aligned discard requests") Signed-off-by:
Jan Kara <jack@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Robert Elliot <elliott@hp.com> Signed-off-by:
-
Catalin Marinas authored
commit fdc69e7d upstream. The set_pte_at() function must update the hardware PTE_RDONLY bit depending on the state of the PTE_WRITE and PTE_DIRTY bits of the given entry value. However, it currently only performs this for pte_valid() entries, ignoring PTE_PROT_NONE. The side-effect is that PROT_NONE mappings would not have the PTE_RDONLY bit set. Without CONFIG_ARM64_HW_AFDBM, this is not an issue since such PROT_NONE pages are not accessible anyway. With commit 2f4b829c ("arm64: Add support for hardware updates of the access and dirty pte bits"), the ptep_set_wrprotect() function was re-written to cope with automatic hardware updates of the dirty state. As an optimisation, only PTE_RDONLY is checked to assess the "dirty" status. Since set_pte_at() does not set this bit for PROT_NONE mappings, such pages may be considered "dirty" as a result of ptep_set_wrprotect(). This patch updates the pte_valid() check to pte_present() in set_pte_at(). It also adds PTE_PROT_NONE to the swap entry bits comment. Fixes: 2f4b829c ("arm64: Add support for hardware updates of the access and dirty pte bits") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Tested-by:
Ganapatrao Kulkarni <gkulkarni@cavium.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit e0a8604f upstream. pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Fixes: b4818afe ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
OGAWA Hirofumi authored
commit c0a2ad9b upstream. On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Kamal Mostafa authored
commit 50fe6dd1 upstream. Use the local uapi headers to keep in sync with "recently" added #define's (e.g. VSS_OP_REGISTER1). Fixes: 3eb2094c ("Adding makefile for tools/hv") Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
