- 11 May, 2013 20 commits
-
-
David Cohen authored
commit 07c449bb upstream. When compiling kernel with -jN (N > 1), all warning/error messages printed while openssl is generating key pair may get mixed dots and other symbols openssl sends to stderr. This patch makes sure openssl logs go to default stdout. Example of the garbage on stderr: crypto/anubis.c:581: warning: ‘inter’ is used uninitialized in this function Generating a 4096 bit RSA private key ......... drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen6_ggtt_insert_entries’: drivers/gpu/drm/i915/i915_gem_gtt.c:440: warning: ‘addr’ may be used uninitialized in this function .net/mac80211/tx.c: In function ‘ieee80211_subif_start_xmit’: net/mac80211/tx.c:1780: warning: ‘chanctx_conf’ may be used uninitialized in this function ..drivers/isdn/hardware/mISDN/hfcpci.c: In function ‘hfcpci_softirq’: .....drivers/isdn/hardware/mISDN/hfcpci.c:2298: warning: ignoring return value of ‘driver_for_each_device’, declared with attribute warn_unused_result Signed-off-by:
David Cohen <david.a.cohen@intel.com> Reviewed-by:
mark gross <mark.gross@intel.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 3f8a6411 upstream. Addresses-Red-Hat-Bugzilla: #913245 Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Lingzhu Xiang <lxiang@redhat.com> Signed-off-by:
-
Hans Schillstrom authored
commit f7a1dd6e upstream. The reason for this patch is crash in kmemdup caused by returning from get_callid with uniialized matchoff and matchlen. Removing Zero check of matchlen since it's done by ct_sip_get_header() BUG: unable to handle kernel paging request at ffff880457b5763f IP: [<ffffffff810df7fc>] kmemdup+0x2e/0x35 PGD 27f6067 PUD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: xt_state xt_helper nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle xt_connmark xt_conntrack ip6_tables nf_conntrack_ftp ip_vs_ftp nf_nat xt_tcpudp iptable_mangle xt_mark ip_tables x_tables ip_vs_rr ip_vs_lblcr ip_vs_pe_sip ip_vs nf_conntrack_sip nf_conntrack bonding igb i2c_algo_bit i2c_core CPU 5 Pid: 0, comm: swapper/5 Not tainted 3.9.0-rc5+ #5 /S1200KP RIP: 0010:[<ffffffff810df7fc>] [<ffffffff810df7fc>] kmemdup+0x2e/0x35 RSP: 0018:ffff8803fea03648 EFLAGS: 00010282 RAX: ffff8803d61063e0 RBX: 0000000000000003 RCX: 0000000000000003 RDX: 0000000000000003 RSI: ffff880457b5763f RDI: ffff8803d61063e0 RBP: ffff8803fea03658 R08: 0000000000000008 R09: 0000000000000011 R10: 0000000000000011 R11: 00ffffffff81a8a3 R12: ffff880457b5763f R13: ffff8803d67f786a R14: ffff8803fea03730 R15: ffffffffa0098e90 FS: 0000000000000000(0000) GS:ffff8803fea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff880457b5763f CR3: 0000000001a0c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/5 (pid: 0, threadinfo ffff8803ee18c000, task ffff8803ee18a480) Stack: ffff8803d822a080 000000000000001c ffff8803fea036c8 ffffffffa000937a ffffffff81f0d8a0 000000038135fdd5 ffff880300000014 ffff880300110000 ffffffff150118ac ffff8803d7e8a000 ffff88031e0118ac 0000000000000000 Call Trace: <IRQ> [<ffffffffa000937a>] ip_vs_sip_fill_param+0x13a/0x187 [ip_vs_pe_sip] [<ffffffffa007b209>] ip_vs_sched_persist+0x2c6/0x9c3 [ip_vs] [<ffffffff8107dc53>] ? __lock_acquire+0x677/0x1697 [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d [<ffffffff810649bc>] ? sched_clock_cpu+0x43/0xcf [<ffffffffa007bb1e>] ip_vs_schedule+0x181/0x4ba [ip_vs] ... Signed-off-by:
Hans Schillstrom <hans@schillstrom.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Peter Zijlstra authored
commit 7cc23cd6 upstream. We should always have proper privileges when requesting kernel data. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andi Kleen <ak@linux.intel.com> Cc: eranian@google.com Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl [ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.orgSigned-off-by:
-
Peter Zijlstra authored
commit 6e15eb3b upstream. The LBR 'from' adddress is under full userspace control; ensure we validate it before reading from it. Note: is_module_text_address() can potentially be quite expensive; for those running into that with high overhead in modules optimize it using an RCU backed rb-tree. Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit 741a698f upstream. Errata BV98 states that all MEM_*_RETIRED events corrupt the counter value of the SMT sibling's counters. Blacklist these events Reported-by:
-
Jan-Simon Möller authored
commit 1b0dac2a upstream. The variable name events_group is already in used and led to a compilation error when using clang to build the Linux Kernel . The fix is just to rename the var. No functional change. Please apply. Fix suggested in discussion by PaX Team <pageexec@freemail.hu> Signed-off-by:
Jan-Simon Möller <dl9pf@gmx.de> Cc: rostedt@goodmis.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/1367316153-14808-1-git-send-email-dl9pf@gmx.deSigned-off-by:
-
Vince Weaver authored
commit 9a6bc143 upstream. According to Intel Vol3b 18.9, the IvyBridge model 58 uncore is the same as that of SandyBridge. I've done some simple tests and with this patch things seem to work on my mac-mini. Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@gmail.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291549320.15827@vincent-weaver-1.um.maine.eduSigned-off-by:
-
Benjamin Herrenschmidt authored
commit 13f85203 upstream. Some ancient pHyp versions used to create a 8 bytes local-mac-address property in the device-tree instead of a 6 bytes one for veth. The Linux driver code to deal with that is an insane hack which also happens to break with some choices of MAC addresses in qemu by testing for a bit in the address rather than just looking at the size of the property. Sanitize this by doing the latter instead. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Poirier authored
commit edb749f4 upstream. Fixes the memory leak of struct jump_key allocated in get_prompt_str() Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Tested-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by:
-
Joerg Roedel authored
commit 197887f0 upstream. Fixes a lockdep warning. Reviewed-by:
Shuah Khan <shuahkhan@gmail.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Naoya Horiguchi authored
commit af73e4d9 upstream. The current kernel returns -EINVAL unless a given mmap length is "almost" hugepage aligned. This is because in sys_mmap_pgoff() the given length is passed to vm_mmap_pgoff() as it is without being aligned with hugepage boundary. This is a regression introduced in commit 40716e29 ("hugetlbfs: fix alignment of huge page requests"), where alignment code is pushed into hugetlb_file_setup() and the variable len in caller side is not changed. To fix this, this patch partially reverts that commit, and adds alignment code in caller side. And it also introduces hstate_sizelog() in order to get proper hstate to specified hugepage size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881 [akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by: <iceman_dvd@yahoo.com> Cc: Steven Truelove <steven.truelove@utoronto.ca> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Suman Anna authored
commit b9777859 upstream. Fix this: warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) Signed-off-by:
Suman Anna <s-anna@ti.com> [edit commit log] Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Suman Anna authored
commit 397944df upstream. Fix this: warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) Signed-off-by:
-
David Jeffery authored
commit ce8a5dbd upstream. When checking if an autofs mount point is busy it isn't sufficient to only check if it's a mount point. For example, if the mount of an offset mountpoint in a tree is denied for this host by its export and the dentry becomes a process working directory the check incorrectly returns the mount as not in use at expire. This can happen since the default when mounting within a tree is nostrict, which means ingnore mount fails on mounts within the tree and continue. The nostrict option is meant to allow mounting in this case. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Axel Lin authored
commit 563861cd upstream. The logic to check return value of clk_enable() and clk_prepare() is reversed, fix it. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Vaidyanathan Srinivasan authored
commit 7122beee upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f8 powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit c2fd22df upstream. Make sure that current->thread.reg exists before we deference it in flush_hash_page. Signed-off-by:
Michael Neuling <mikey@neuling.org> Reported-by:
John J Miller <millerjo@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
commit 73d2fb75 upstream. POWER8 allows read and write of the DSCR in userspace. We added kernel emulation so applications could always use the instructions regardless of the CPU type. Unfortunately there are two SPRs for the DSCR and we only added emulation for the privileged one. Add code to match the non privileged one. A simple test was created to verify the fix: http://ozlabs.org/~anton/junkcode/user_dscr_test.c Without the patch we get a SIGILL and it passes with the patch. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Stefano Stabellini authored
commit 2798ba7d upstream. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
Ian Campbell <ian.camjpbell@citrix.com> Signed-off-by:
-
- 08 May, 2013 20 commits
-
-
Greg Kroah-Hartman authored
-
Lars-Peter Clausen authored
commit c6cc25fd upstream. The adp5520 unfortunately also clears the BL_EN bit when the nSTNDBY bit is cleared. So we need to make sure to restore it during resume if it was set before suspend. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Al Viro authored
commit 7ee2b9e5 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Terry Barnaby authored
commit bdbc5d0c upstream. The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by:
Terry Barnaby <terry@beam.ltd.uk> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Philip Rakity authored
commit 836dc2fe upstream. PARTITION_SUPPORT needs to be set before doing the compare on version number so the bit width test does not get invalid data. Before this patch, a Sandisk iNAND eMMC card would detect 1-bit width although the hardware supports 4-bit. Only affects old emmc devices - pre 4.4 devices. Reported-by:
Elad Yi <elad.yi@gmail.com> Signed-off-by:
Philip Rakity <prakity@yahoo.com> Signed-off-by:
-
Li Fei authored
commit f7b0e105 upstream. With the current implementation, kstat_cpu(cpu).irqs_sum is also increased in case of irq_mis_count increment. So there is no need to count irq_mis_count in arch_irq_stat, otherwise irq_mis_count will be counted twice in the sum of /proc/stat. Reported-by:
Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by:
Li Fei <fei.li@intel.com> Acked-by:
-
Gleb Natapov authored
commit 660696d1 upstream. Source operand for one byte mov[zs]x is decoded incorrectly if it is in high byte register. Fix that. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
David Howells authored
commit 9e687946 upstream. Give the OID registry file module information so that it doesn't taint the kernel when compiled as a module and loaded. Reported-by:
Dros Adamson <Weston.Adamson@netapp.com> Signed-off-by:
-
Johan Hovold authored
commit 91cf54fe upstream. Fix regression introduced by commit 796211b7 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Acked-by:
-
Al Viro authored
commit 0d5cadb8 upstream. Bisected-by:
Michael Leun <lkml20130126@newton.leun.net> Signed-off-by:
-
Theodore Ts'o authored
commit 7f3e3c7c upstream. Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the change made by commit a0b30c12: ext4: use module parameters instead of debugfs for mballoc_debug Signed-off-by:
-
Theodore Ts'o authored
commit c5c72d81 upstream. Commit fb0a387d restricts block allocations for indirect-mapped files to block groups less than s_blockfile_groups. However, the online resizing code wasn't setting s_blockfile_groups, so the newly added block groups were not available for non-extent mapped files. Reported-by:
-
Dmitry Monakhov authored
commit 171a7f21 upstream. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Dmitry Monakhov authored
commit a75ae78f upstream. Otherwise destroyed ext_sb_info will be part of global shinker list and result in the following OOPS: JBD2: corrupted journal superblock JBD2: recovery failed EXT4-fs (dm-2): error loading journal general protection fault: 0000 [#1] SMP Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\ mod CPU 1 Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136 /DH55TC RIP: 0010:[<ffffffff811bfb2d>] [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP: 0000:ffff88011d5cbcd8 EFLAGS: 00010207 RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848 R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000 FS: 00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80) Stack: ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1 00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000 ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000 Call Trace: [<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0 [<ffffffff81249381>] mount_bdev+0x331/0x340 [<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180 [<ffffffff81362035>] ext4_mount+0x15/0x20 [<ffffffff8124869a>] mount_fs+0x9a/0x2e0 [<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170 [<ffffffff81279c02>] do_new_mount+0x172/0x2e0 [<ffffffff8127aa56>] do_mount+0x376/0x380 [<ffffffff8127ab98>] sys_mount+0x138/0x150 [<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\ 8 RIP [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP <ffff88011d5cbcd8> Signed-off-by:
-
Dmitry Monakhov authored
commit 5d3ee208 upstream. It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dmitry Monakhov authored
commit 794446c6 upstream. The following race is possible: [kjournald2] other_task jbd2_journal_commit_transaction() j_state = T_FINISHED; spin_unlock(&journal->j_list_lock); ->jbd2_journal_remove_checkpoint() ->jbd2_journal_free_transaction(); ->kmem_cache_free(transaction) ->j_commit_callback(journal, transaction); -> USE_AFTER_FREE WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 In order to demonstrace this issue one should mount ext4 with mount -o discard option on SSD disk. This makes callback longer and race window becomes wider. In order to fix this we should mark transaction as finished only after callbacks have completed Signed-off-by:
-
Theodore Ts'o authored
commit d76a3a77 upstream. In the case where an inode has a very stale transaction id (tid) in i_datasync_tid or i_sync_tid, it's possible that after a very large (2**31) number of transactions, that the tid number space might wrap, causing tid_geq()'s calculations to fail. Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily", attempted to fix this problem, but it only avoided kjournald spinning forever by fixing the logic in jbd2_log_start_commit(). Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c that might call jbd2_log_start_commit() with a stale tid, those functions will subsequently call jbd2_log_wait_commit() with the same stale tid, and then wait for a very long time. To fix this, we replace the calls to jbd2_log_start_commit() and jbd2_log_wait_commit() with a call to a new function, jbd2_complete_transaction(), which will correctly handle stale tid's. As a bonus, jbd2_complete_transaction() will avoid locking j_state_lock for writing unless a commit needs to be started. This should have a small (but probably not measurable) improvement for ext4's scalability. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
George Barnett <gbarnett@atlassian.com> Signed-off-by:
-
H. Peter Anvin authored
commit 78d77df7 upstream. During early init, we would incorrectly set the NX bit even if the NX feature was not supported. Instead, only set this bit if NX is actually available and enabled. We already do very early detection of the NX bit to enable it in EFER, this simply extends this detection to the early page table mask. Reported-by:
Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1367476850.5660.2.camel@nexusSigned-off-by:
-
Richard Cochran authored
commit 73e3dd6b upstream. The PTP Hardware Clock settime function in the e1000e driver computes nanoseconds from a struct timespec. The code converts the seconds field .tv_sec by multiplying it with NSEC_PER_SEC. However, both operands are of type long, resulting in an unintended overflow. The patch fixes the issue by using the helper function from time.h. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jacob Keller authored
commit d87d8307 upstream. Previously, the ixgbe_msix_other was writing the full 32bits of the set interrupts, instead of only the ones which the ixgbe_msix_other is handling. This resulted in a loss of performance when the X540's PPS feature is enabled due to sometimes clearing queue interrupts which resulted in the driver not getting the interrupt for cleaning the q_vector rings often enough. The fix is to simply mask the lower 16bits off so that this handler does not write them in the EICR, which causes them to remain high and be properly handled by the clean_rings interrupt routine as normal. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
