- 19 Jun, 2023 33 commits
-
-
Mukesh Sisodiya authored
Userspace can now select the link to use for TDLS management frames (indicating e.g. which BSSID should be used), use the link_id received from cfg80211 to build the frames. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094948.ce1fc230b505.Ie773c5679805001f5a52680d68d9ce0232c57648@changeid [Benjamin fixed some locking] Co-developed-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Mukesh Sisodiya authored
For multi-link operation(MLO) TDLS management frames need to be transmitted on a specific link. The TDLS setup request will add BSSID along with peer address and userspace will pass the link-id based on BSSID value to the driver(or mac80211). Signed-off-by:
-
Gustavo A. R. Silva authored
-Wstringop-overflow is legitimately warning us about extra_size pontentially being zero at some point, hence potenially ending up _allocating_ zero bytes of memory for extra pointer and then trying to access such object in a call to copy_from_user(). Fix this by adding a sanity check to ensure we never end up trying to allocate zero bytes of data for extra pointer, before continue executing the rest of the code in the function. Address the following -Wstringop-overflow warning seen when built m68k architecture with allyesconfig configuration: from net/wireless/wext-core.c:11: In function '_copy_from_user', inlined from 'copy_from_user' at include/linux/uaccess.h:183:7, inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:825:7: arch/m68k/include/asm/string.h:48:25: warning: '__builtin_memset' writing 1 or more bytes into a region of size 0 overflows the destination [-Wstringop-overflow=] 48 | #define memset(d, c, n) __builtin_memset(d, c, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/uaccess.h:153:17: note: in expansion of macro 'memset' 153 | memset(to + (n - res), 0, res); | ^~~~~~ In function 'kmalloc', inlined from 'kzalloc' at include/linux/slab.h:694:9, inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:819:10: include/linux/slab.h:577:16: note: at offset 1 into destination object of size 0 allocated by '__kmalloc' 577 | return __kmalloc(size, flags); | ^~~~~~~~~~~~~~~~~~~~~~ This help with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/315Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZItSlzvIpjdjNfd8@workSigned-off-by:
-
Gregory Greenman authored
Start supporting API version 81 for AX devices. Signed-off-by:
-
Ilan Peer authored
Scan API version 16 use link ID for reporting the TSF of scan results (instead of MAC ID used in previous versions). Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Ilan Peer authored
And instead use the vif getter functions, as a preparation for supporting disabled/dormant links. Signed-off-by:
-
Miri Korenblit authored
There several transitions to handle in eSR mode: * SMPS should be disabled when in eSR mode * indicate to the fw whether the new added link should use the listen lmac or the main lmac * RLC is offloaded when in eSR mode; adjust RLC command accordingly Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Miri Korenblit authored
The max active links that are supported by the FW is hard coded. This is wrong since this value is HW-dependent. Fix this by determining according to the actual HW. Also remove a redundant check that the number of active links doesn't exceeds the maximum. Signed-off-by:
-
Nicolas Cavallari authored
In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by mesh_matches_local() for every received mesh beacon. On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not have EHT capabilities, even if the received mesh beacon does not have an EHT element. Unlike HE, not supporting EHT in the 6 GHz band is not an error so do not print anything in this case. Fixes: 5dca295d ("mac80211: Add initial support for EHT and 320 MHz channels") Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Reviewed-by:
-
Anjaneyulu authored
Validate index before access iwl_rate_mcs to keep rate->index inside the valid boundaries. Use MCS_0_INDEX if index is less than MCS_0_INDEX and MCS_9_INDEX if index is greater then MCS_9_INDEX. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Anjaneyulu authored
Verify slots_num is valid in iwl_txq_alloc() Signed-off-by:
-
Anjaneyulu authored
Validate tid is less then MAX TID when it is used to access corresponding arrays. Signed-off-by:
-
Johannes Berg authored
If the AP is an AP MLD, then we shouldn't track just the BSSID but the MLD address. Just generally use ap_addr since it has the BSSID in the non-MLD case. Signed-off-by:
-
Johannes Berg authored
We skipped this in the past, but now we will need it for some platforms. Implement loading the PHY filter configuration IDs from the WPFC ACPI table. Note that the firmware must also be aware of the right filter configuration IDs (they're just the IDs of a filter configuration, not the actual configuration). Remove the useless hardcoded zeroes while at it. Signed-off-by:
-
Anjaneyulu authored
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry is zero. For the case when entry->entry is not equal to 0, rxq won't be NULL even if trans_pcie->rxq is NULL. Modify checker to check for trans_pcie->rxq. Fixes: abc599ef ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt") Signed-off-by:
-
Johannes Berg authored
When the firmware misbehaves (according to the driver), we often either ignore that, or WARN_ON, which is very noisy but doesn't really help. Add a little helper macro IWL_FW_CHECK() that can be used in place of WARN_ON() in conditions, and make it take a message that's printed in this case. We can also add more behaviour to this in the future. Signed-off-by:
-
Johannes Berg authored
The firmware technically only needs this when the link is newly added, but it's much easier for debugging if it's always available, so include it. Signed-off-by:
-
Johannes Berg authored
When calling iwl_mvm_set_fw_qos_params() we explicitly pass a pointer to the first array element, but the function will treat it as an array. Simplify and clarify the code and pass the array instead. Signed-off-by:
-
Johannes Berg authored
We have the data structure set up to store the parameters per link, but weren't using them. Fix that and store them in the right link. Signed-off-by:
-
Johannes Berg authored
Again, during some (botched) FW restart scenarios we can end up with a NULL link in the driver but mac80211 thinking all is still going OK. If we try to TX at the same time, we can crash there. Fix that by checking for a NULL link during TX. Signed-off-by:
-
Johannes Berg authored
We've observed that in some botched firmware restart scenarios when the firmware crashes again while we're reconfiguring, we can hit NULL pointer crashes here. The underlying issue is the botched restart which we need to fix separately, but until we can do that, don't crash hard here. Signed-off-by:
-
Ariel Malamud authored
On fw error dump, dmesg prints FSEQ register data. Add 4 additional prints in order to match those being dumped by Windows driver. Allows fw infra to correctly detect version mismatch. Signed-off-by:
Ariel Malamud <ariel.malamud@intel.com> Signed-off-by:
-
Johannes Berg authored
There are evidently cases where the firmware completes the reset but the interrupt isn't received correctly, so check for the interrupt again after the timeout, and don't dump the firmware error log if the right bit is set. Signed-off-by:
-
Johannes Berg authored
In mac80211, it's required that we pull from TXQs by calling ieee80211_tx_dequeue() only with softirqs disabled. However, in iwl_mvm_queue_state_change() we're often called with them enabled, e.g. from flush if anything was flushed, triggering a mac80211 warning. Fix that by disabling the softirqs across the TX call. Fixes: cfbc6c4c ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by:
-
Johannes Berg authored
We have this helper now instead of open-coding the check for the dmi_tas_approved_list, so use it even here. It was added for debugfs use, but it's better to be consistent. Signed-off-by:
-
Johannes Berg authored
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and iwl_acpi_get_object() need not be exported etc., they're used only within the same file. Make them static. Signed-off-by:
-
Ilan Peer authored
If HT STBC is not supported, do not indicate support for VHT TX STBC. Signed-off-by:
-
Johannes Berg authored
We can't just dereference the sband->iftype_data pointer, that's an array so we need to access the right entry. Use the previously introduced helper functions to do that. There are also cases, e.g. when loading with disable_11ax=1, where the pointer might be NULL but we still attempt to use it, causing a crash. Fixes: 529281bd ("iwlwifi: mvm: limit TLC according to our HE capabilities") Signed-off-by:
-
Mukesh Sisodiya authored
While vif pointers are protected by the corresponding "*active" fields, static checkers can get confused sometimes. Add an explicit check. Signed-off-by:
-
Johannes Berg authored
The hardware isn't going to get fixed, so this mode cannot work in the foreseeable future. Remove it. Signed-off-by:
-
Ilan Peer authored
Add debugfs entry to report dormant (valid but disabled) links. Signed-off-by:
-
Ilan Peer authored
When the association is complete, do not configure disabled links, and track them as part of the interface data. Signed-off-by:
-
Johannes Berg authored
There are some locking changes that will later otherwise cause conflicts, so merge wireless into wireless-next to avoid those. Signed-off-by:
-
- 16 Jun, 2023 4 commits
-
-
Kalle Valo authored
GCC 12.2 with W=1 warns: drivers/net/wireless/legacy/ray_cs.c:630:17: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation] The driver uses SSID as a string which is just wrong, it should be treated as a byte array instead. But as the driver is ancient and most likely there are no users so convert it to use strscpy(). This makes sure that the string is NUL-terminated and also the warning is fixed. Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613140918.389690-5-kvalo@kernel.org
-
Kalle Valo authored
With GCC 13.1 and W=1 hostap has a warning: drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3633:17: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] fortify-string.h recommends not to use strncpy() so use strscpy() which fixes the warning. Also now it's guarenteed that the string is NUL-terminated. Compile tested only. Signed-off-by:
-
Kalle Valo authored
With GCC 13.1 and W=1 brcmsmac has warnings like this: ./include/trace/stages/stage5_get_offsets.h:23:31: warning: function 'trace_event_get_offsets_brcms_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] Add a workaround which disables -Wsuggest-attribute=format in brcms_trace_brcmsmac_msg.h. I see similar workarounds in other drivers as well. Compile tested only. Signed-off-by:
-
Kalle Valo authored
With GCC 13.1 and W=1 brcmfmac has warnings like this: ./include/trace/perf.h:26:16: warning: function 'perf_trace_brcmf_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] Add a workaround which disables -Wsuggest-attribute=format in tracepoint.h. I see similar workarounds in other drivers as well. Compile tested only. Signed-off-by:
-
- 15 Jun, 2023 3 commits
-
-
Dmitry Antipov authored
Fix spelling typo of IQK debug messages. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Dmitry Antipov authored
Drop useless '_iqk_track()' and 'rtw8852a_iqk_track()' (they just change 'thermal_rek_en' field which is set but unused and so removed as well) functions, set but unused 'kcount' field of 'struct rtw89_iqk_info', and convert 'thermal' to local variables where appropriate (it doesn't need to have longer storage duration because it is actually used for the debugging purposes only). Signed-off-by:
-
Dmitry Antipov authored
Remove a bunch of unused (and set but unused) fields from 'struct rtw89_btc_wl_nhm', 'struct rtw89_dle_info', 'struct rtw89_hal' and 'struct rtw89_env_monitor_info' driver-specific data structures, adjust related bits. Signed-off-by:
-
