- 21 Jul, 2017 22 commits
-
-
Gilad Ben-Yossef authored
commit 1606043f upstream. The Atmel SHA driver was treating -EBUSY as indication of queueing to backlog without checking that backlog is enabled for the request. Fix it by checking request flags. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Hicks authored
commit 03d2c511 upstream. An updated patch that also handles the additional key length requirements for the AEAD algorithms. The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD algorithms it's longer still. Extend the max keysize for the AEAD size for AES256 + HMAC(SHA512). Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms") Signed-off-by:
Martin Hicks <mort@bork.org> Acked-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Helge Deller authored
commit 37511fb5 upstream. Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90 ("Allow stack to grow up to address space limit") Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Adam Borowski authored
commit 6987dc8a upstream. Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
-
Kees Cook authored
commit da029c11 upstream. To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Cyril Bur authored
commit 8d81ae05 upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by:
Cyril Bur <cyrilbur@gmail.com> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sahitya Tummala authored
commit b17c070f upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
Sahitya Tummala <stummala@codeaurora.org> Suggested-by:
Jan Kara <jack@suse.cz> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
-
Marcin Nowakowski authored
commit c0d80dda upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ben Hutchings authored
commit 98dcea0c upstream. liblockdep has been broken since commit 75dd602a ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Helge Deller authored
commit 649aa242 upstream. This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm(). This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off(). Signed-off-by:
-
Thomas Bogendoerfer authored
commit 33f9e024 upstream. Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG: CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156 task: 000000009e050000 task.stack: 000000009e04c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001111 Not tainted r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8 CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2 ORIG_R28: 0000000000000200 IAOQ[0]: sba_dma_supported+0x80/0xd0 IAOQ[1]: sba_dma_supported+0x84/0xd0 RP(r2): parport_pc_probe_port+0x178/0x1200 Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Eric Biggers authored
commit b0f94efd upstream. Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
-
Helge Deller authored
commit 24746231 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by:
-
Suzuki K Poulose authored
commit 866d7c1b upstream. The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN: [ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051] This patch adds the check to make sure the cpu is valid. Fixes: commit 021f6537 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Srinivas Dasari authored
commit 9361df14 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID. Fixes: 67fbb16b ("nl80211: PMKSA caching support") Signed-off-by:
Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Srinivas Dasari authored
commit d7f13f74 upstream. validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy. Validate size of each attribute before parsing to avoid potential buffer overread. Fixes: 2a519311 ("cfg80211/nl80211: scanning (and mac80211 update to use it)") Signed-off-by:
-
Srinivas Dasari authored
commit 8feb69c7 upstream. Buffer overread may happen as nl80211_set_station() reads 4 bytes from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without validating the size of data received when userspace sends less than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE. Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid the buffer overread. Fixes: 3b1c5a53 ("{cfg,nl}80211: mesh power mode primitives and userspace access") Signed-off-by:
-
Arend van Spriel authored
commit 8f44c9a4 upstream. The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by:
"freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sabrina Dubroca authored
commit ec8add2a upstream. Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1): ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 In the same situation, this will succeed and not remove the address (2): ip addr add 1111::12/64 dev $DEV ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why: * If the device is not ready: * - keep it tentative if it is a permanent address. * - otherwise, kill it. We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2). addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses. Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Eric Dumazet authored
commit 6f64ec74 upstream. Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
WANG Cong authored
commit d747a7a5 upstream. We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by:
Andrei Vagin <avagin@gmail.com> Reported-by:
Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
commit 60abc0be upstream. The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
- 15 Jul, 2017 18 commits
-
-
Greg Kroah-Hartman authored
-
Maciej S. Szmigiero authored
commit 5a91206f upstream. When saa7134 module driving a Medion 7134 card is reloaded reads of this card EEPROM (required for automatic detection of tuner model) will be corrupted due to I2C gate in DVB-T demod being left closed. This sometimes also happens on first saa7134 module load after a warm reboot. Fix this by opening this I2C gate before doing EEPROM read during i2c initialization. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Ian Abbott authored
commit a9332e9a upstream. There is a clean-up bug in the core comedi module initialization functions, `comedi_init()`. If the `comedi_num_legacy_minors` module parameter is non-zero (and valid), it creates that many "legacy" devices and registers them in SysFS. A failure causes the function to clean up and return an error. Unfortunately, it fails to destroy the "comedi" class that was created earlier. Fix it by adding a call to `class_destroy(comedi_class)` at the appropriate place in the clean-up sequence. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Malcolm Priestley authored
commit dc32190f upstream. The key table is not intialized correctly without this call. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Jason Yan authored
commit 3fb632e4 upstream. The sb->super_offset should be big-endian, but the rdev->sb_start is in host byte order, so fix this by adding cpu_to_le64. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Cong Wang authored
commit f991af3d upstream. The retry logic for netlink_attachskb() inside sys_mq_notify() is nasty and vulnerable: 1) The sock refcnt is already released when retry is needed 2) The fd is controllable by user-space because we already release the file refcnt so we when retry but the fd has been just closed by user-space during this small window, we end up calling netlink_detachskb() on the error path which releases the sock again, later when the user-space closes this socket a use-after-free could be triggered. Setting 'sock' to NULL here should be sufficient to fix it. Reported-by:
GeneBlue <geneblue.mail@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 57cb17e7 upstream. This function has two callers and neither are able to handle a NULL return. Really, -EINVAL is the correct thing return here anyway. This fixes some static checker warnings like: security/keys/encrypted-keys/encrypted.c:709 encrypted_key_decrypt() error: uninitialized symbol 'master_key'. Fixes: 7e70cb49 ("keys: add new key-type encrypted") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Bjørn Mork authored
commit 996fab55 upstream. A new Sierra Wireless EM7305 device ID used in a Toshiba laptop. Reported-by:
Petr Kloc <petr_kloc@yahoo.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 8fb060da upstream. Add two Longcheer device-id entries which specifically enables a Telewell TW-3G HSPA+ branded modem (0x9801). Reported-by:
Teemu Likonen <tlikonen@iki.fi> Reported-by:
Lars Melin <larsm17@gmail.com> Tested-by:
-
Geert Uytterhoeven authored
commit 3091ae77 upstream. Update the sh_pfc_soc_info pointer after calling the SoC-specific initialization function, as it may have been updated to e.g. handle different SoC revisions. This makes sure the correct subdriver name is printed later. Fixes: 0c151062 ("sh-pfc: Add support for SoC-specific initialization") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Uwe Kleine-König authored
commit da6c2add upstream. To set the mux mode of a pin two bits must be set. Up to now this is implemented using the following idiom: writel(mask, reg + CLR); writel(value, reg + SET); . This however results in the mux mode being 0 between the two writes. On my machine there is an IC's reset pin connected to LCD_D20. The bootloader configures this pin as GPIO output-high (i.e. not holding the IC in reset). When Linux reconfigures the pin to GPIO the short time LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse the connected IC. The same problem is present for the pin's drive strength setting which is reset to low drive strength before using the right value. So instead of relying on the hardware to modify the register setting using two writes implement the bit toggling using read-modify-write. Fixes: 17723111 ("pinctrl: add pinctrl-mxs support") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 7cf916bd upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Michael Grzeschik authored
commit b3b51417 upstream. The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Devin Heitmueller authored
commit 6836796d upstream. The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Jeremie Rapin authored
commit fd90f73a upstream. Added the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by:
Jeremie Rapin <rapinj@gmail.com> Acked-by:
-
Felipe Balbi authored
commit 04fb365c upstream. %p will leak kernel pointers, so let's not expose the information on dmesg and instead use %pK. %pK will only show the actual addresses if explicitly enabled under /proc/sys/kernel/kptr_restrict. Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Sabrina Dubroca authored
commit 9e52b325 upstream. Always try to parse an address, since kstrtoul() will safely fail when given a symbol as input. If that fails (which will be the case for a symbol), try to parse a symbol instead. This allows creating a probe such as: p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0 Which is necessary for this command to work: perf probe -m 8021q -a vlan_gro_receive Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net Fixes: 413d37d1 ("tracing: Add kprobe-based event tracer") Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Jonas Gorski authored
commit db1319e1 upstream. Commit d445913c ("usb: ehci-orion: add optional PHY support") added support for optional phys, but devm_phy_optional_get returns -ENOSYS if GENERIC_PHY is not enabled. This causes probe failures, even when there are no phys specified: [ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38 [ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38 Similar to dwc3, treat -ENOSYS as no phy. Fixes: d445913c ("usb: ehci-orion: add optional PHY support") Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Acked-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
