- 12 Jun, 2007 4 commits
-
-
Brice Goglin authored
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet, add a message when we detect that the link partner is not running in the right mode. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by:
-
Mithlesh Thukral authored
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: -
Jeff Garzik authored
This reverts commit d52df4a3. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
- 09 Jun, 2007 36 commits
-
-
Sam Ravnborg authored
Replace invisible character with a space. The diff looks like this on my terminal: - <A0>Choose this option if you're using a host-to-host cable - <A0>with one of these chips. + Choose this option if you're using a host-to-host cable + with one of these chips. Reported by: Massimo Maiurana <maiurana@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Massimo Maiurana <maiurana@gmail.com> Signed-off-by:
-
Kim Phillips authored
Support for configuring RGMII-ID (RGMII with internal delay) mode on the 88e1111 and 88e1145. Ucc_geth on MPC8360EMDS(the main user of ucc_geth) is broken after changed to use phylib. It is fixed by adding this internal delay. Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were found), and fixed some whitespace. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Thomas Klein authored
This patch fixes a possible kernel panic due to not checking the vlan group when processing received VLAN packets and a malfunction in VLAN/hypervisor registration. Signed-off-by:
Thomas Klein <tklein@de.ibm.com> Signed-off-by:
-
Mithlesh Thukral authored
NetXen: Add NETXEN prefixes to macros to clean them up. This is a cleanup patch which adds NETXEN prefix to some stand alone macro names. These posed compile errors when NetXen driver was backported to 2.6.9 on PPC architecture as macros like USER_START are defined in file arch/ppc64/mm/hash_utils.c Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Acked-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by:
-
Mithlesh Thukral authored
NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware This patch fixes the ping problem seen X/PBlades after the adapter's firmware was moved to 3.4.19. After configured interface up, ping failed. NetXen adapter couldn't accept ARP broadcast packet. Manual addition of MAC address in the ARP table, made ping work. NetXen adapter should finish initilization after system boot. But looks NetXen adapter didn't initilization correctly after system boot up. So have to re-load the firmware again in probe routine. Also re-initilization netxen_config_0 and netxen_config_1 registers. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: -
Dave Jones authored
http://bugzilla.kernel.org/show_bug.cgi?id=8160Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Brian King authored
Currently, ibmveth maintains several rx buffer pools, which can be modified through sysfs. By default, pools are not allocated by default such that jumbo frames cannot be supported without first activating larger rx buffer pools. This results in failures when attempting to change the mtu. This patch makes ibmveth automatically allocate these larger buffer pools when the mtu is changed. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
When attempting to activate additional rx buffer pools on an ibmveth interface that was not yet up, the error below was seen. The patch fixes this by only closing and opening the interface to activate the resize if the interface is already opened. (drivers/net/ibmveth.c:597 ua:30000004) ERROR: h_free_logical_lan failed with fffffffffffffffc, continuing with close Unable to handle kernel paging request for data at address 0x00000ff8 Faulting instruction address: 0xd0000000002540e0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=128 NUMA PSERIES LPAR Modules linked in: ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle ipta ble_nat ip_nat iptable_filter ip6table_mangle ip_conntrack nfnetlink ip_tables i p6table_filter ip6_tables x_tables ipv6 apparmor aamatch_pcre loop dm_mod ibmvet h sg ibmvscsic sd_mod scsi_mod NIP: D0000000002540E0 LR: D0000000002540D4 CTR: 80000000001AF404 REGS: c00000001cd27870 TRAP: 0300 Not tainted (2.6.16.46-0.4-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24242422 XER: 00000007 DAR: 0000000000000FF8, DSISR: 0000000040000000 TASK = c00000001ca7b4e0[1636] 'sh' THREAD: c00000001cd24000 CPU: 0 GPR00: D0000000002540D4 C00000001CD27AF0 D000000000265650 C00000001C936500 GPR04: 8000000000009032 FFFFFFFFFFFFFFFF 0000000000000007 000000000002C2EF GPR08: FFFFFFFFFFFFFFFF 0000000000000000 C000000000652A10 C000000000652AE0 GPR12: 0000000000004000 C0000000004A3300 00000000100A0000 0000000000000000 GPR16: 00000000100B8808 00000000100C0F60 0000000000000000 0000000010084878 GPR20: 0000000000000000 00000000100C0CB0 00000000100AF498 0000000000000002 GPR24: 00000000100BA488 C00000001C936760 D000000000258DD0 C00000001C936000 GPR28: 0000000000000000 C00000001C936500 D000000000265180 C00000001C936000 NIP [D0000000002540E0] .ibmveth_close+0xc8/0xf4 [ibmveth] LR [D0000000002540D4] .ibmveth_close+0xbc/0xf4 [ibmveth] Call Trace: [C00000001CD27AF0] [D0000000002540D4] .ibmveth_close+0xbc/0xf4 [ibmveth] (unreliable) [C00000001CD27B80] [D0000000002545FC] .veth_pool_store+0xd0/0x260 [ibmveth] [C00000001CD27C40] [C00000000012E0E8] .sysfs_write_file+0x118/0x198 [C00000001CD27CF0] [C0000000000CDAF0] .vfs_write+0x130/0x218 [C00000001CD27D90] [C0000000000CE52C] .sys_write+0x4c/0x8c [C00000001CD27E30] [C00000000000871C] syscall_exit+0x0/0x40 Instruction dump: 419affd8 2fa30000 419e0020 e93d0000 e89e8040 38a00255 e87e81b0 80c90018 48001531 e8410028 e93d00e0 7fa3eb78 <e8090ff8> f81d0430 4bfffdc9 38210090 Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Fix invalid assertion during write on 64k pages ocfs2: Fix masklog breakage
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine. [NetLabel]: consolidate the struct socket/sock handling to just struct sock [IPV4]: Do not remove idev when addresses are cleared
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Handle PCI bridges without 'ranges' property. [SPARC64]: Include <linux/rwsem.h> instead of <asm/rwsem.h>.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: OHCI: Fix machine check in ohci_hub_status_data USB: Fix up bogus bInterval values in endpoint descriptors USB: cxacru: ignore error trying to start ADSL in atm_start USB: cxacru: create sysfs attributes in atm_start instead of bind USB: cxacru: add Documentation file USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu USB: usb gadgets avoid le{16,32}_to_cpup() usblp: Don't let suspend to kill ->used USB: set default y for CONFIG_USB_DEVICE_CLASS -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: firmware: remove orphaned Email kobject: use the proper printk level for kobject error Driver core: kill unused code Driver core: keep PHYSDEV for old struct class_device update Documentation/driver-model/platform.txt
-
Robert P. J. Day authored
Prevent <linux/console_struct.h> from being included more than once, otherwise you get a redefinition error if you happen to include <linux/vt_kern.h> first. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Whitcroft authored
This version brings a some new tests, and a host of changes to fix false positives, of particular note: - check for and report #if 0 - extend checking of line lengths and spacing for .pl, .sh etc - extends the pointer type checks to multiple levels - updates printk handling to track newlines - adds a wrapped patch detector - drops the leading component of the filenames - extends switch indent handling to switch statmentes rooted in the context - adds foo * bar single pointer checks This version of checkpatch.pl can be found at the following URL: http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.04 Full Changelog: Andy Whitcroft (16): allow checking line lengths and spacing on other source files clean up that whitespace sanitise the input line standardising the content of quotes clean up pointer type * and space checks fix up the sanitiser so it maintains the line length apply the printk facility checks only to the first printk in a set switch/case indent checks may anchor in the context add a wrapped patch detector put the #ifdef in C file checks on ice asm volatile is acceptable check for and report #if 0 drop the leading component of the filename as patches are -p1 use the original line when reporting operator errors correct spelling of Joel's name Version: 0.04 add support for struct foo * bar checks Geert Uytterhoeven (1): Fix checkpatch.pl name in usage template Randy Dunlap (1): checkpatch: produce fewer lines of output Signed-off-by:Andy Whitcroft <apw@shadowen.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Add a prefix string parameter. Callers are responsible for any string length/alignment that they want to see in the output. I.e., callers should pad strings to achieve alignment if they want that. Add rowsize parameter. This is the number of raw data bytes to be printed per line. Must be 16 or 32. Add a groupsize parameter. This allows callers to dump values as 1-byte, 2-byte, 4-byte, or 8-byte numbers. Default is 1-byte numbers. If the total length is not an even multiple of groupsize, 1-byte numbers are printed. Add an "ascii" output parameter. This causes ASCII data output following the hex data output. Clean up some doc examples. Align the ASCII output on all lines that are produced by one call. Add a new interface, print_hex_dump_bytes(), that is a shortcut to print_hex_dump(), using default parameter values to print 16 bytes in byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Alan Cox authored
The UFS entry was misformatted The NEC V850 links are all broken The Berkshire watchdog links are all broken Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Produce one less line of output per flagged incident. Change this: use tabs not spaces PATCH: /home/rddunlap/arcmsr1200014.patch4:756: FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843: + return PCI_ERS_RESULT_NEED_RESET;$ to this: use tabs not spaces #756: FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843: + return PCI_ERS_RESULT_NEED_RESET;$ Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Jeff Mahoney authored
This patch changes MAINTAINERS to reflect the new location of the reiserfs development mailing list. The old list forwards to the new one. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Andrew Morton authored
We don't want to see this: > BUG: using smp_processor_id() in preemptible [00000001] code: bash/3857 > caller is oops_begin+0xb/0x6f > > Call Trace: > [<ffffffff8020ab4d>] show_trace+0x34/0x4f > [<ffffffff8020ab7a>] dump_stack+0x12/0x17 > [<ffffffff8030d92d>] debug_smp_processor_id+0xad/0xbc > [<ffffffff8042388f>] oops_begin+0xb/0x6f > [<ffffffff8042520b>] do_page_fault+0x66a/0x7c0 > [<ffffffff804234bd>] error_exit+0x0/0x84 > coming out when the kernel is trying to oops. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Bob Picco authored
We aren't sampling for holes in memory. Thus we encounter a section hole with empty section map pointer for SPARSEMEM and OOPs for show_mem. This issue has been seen in 2.6.21, current git and current mm. The patch below is for mainline and mm. It was boot tested for SPARSEMEM, current VMEMMAP of Andy's in mm ml and DISCONTIGMEM. A slightly different patch will be posted to stable for 2.6.21. Previous to commit f0a5a58a memory_present was called for node_start_pfn to node_end_pfn. This would cover the hole(s) with reserved pages and valid sections. Most SPARSEMEM supported arches do a pfn_valid check in show_mem before computing the page structure address. This issue was brought to my attention on IRC by Arnaldo Carvalho de Melo. Thanks to Arnaldo for testing. Signed-off-by:
Bob Picco <bob.picco@hp.com> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by:
-
Alexey Kuznetsov authored
1. New entries can be added to tsk->pi_state_list after task completed exit_pi_state_list(). The result is memory leakage and deadlocks. 2. handle_mm_fault() is called under spinlock. The result is obvious. 3. results in self-inflicted deadlock inside glibc. Sometimes futex_lock_pi returns -ESRCH, when it is not expected and glibc enters to for(;;) sleep() to simulate deadlock. This problem is quite obvious and I think the patch is right. Though it looks like each "if" in futex_lock_pi() got some stupid special case "else if". :-) 4. sometimes futex_lock_pi() returns -EDEADLK, when nobody has the lock. The reason is also obvious (see comment in the patch), but correct fix is far beyond my comprehension. I guess someone already saw this, the chunk: if (rt_mutex_trylock(&q.pi_state->pi_mutex)) ret = 0; is obviously from the same opera. But it does not work, because the rtmutex is really taken at this point: wake_futex_pi() of previous owner reassigned it to us. My fix works. But it looks very stupid. I would think about removal of shift of ownership in wake_futex_pi() and making all the work in context of process taking lock. From: Thomas Gleixner <tglx@linutronix.de> Fix 1) Avoid the tasklist lock variant of the exit race fix by adding an additional state transition to the exit code. This fixes also the issue, when a task with recursive segfaults is not able to release the futexes. Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH problem finally. Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup in the lock protected section by using the in_atomic userspace access functions. This removes also the ugly lock drop / unqueue inside of fixup_pi_state() Fix 4) Fix a stale lock in the error path of futex_wake_pi() Added some error checks for verification. The -EDEADLK problem is solved by the rtmutex fixups. Signed-off-by:Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Thomas Gleixner authored
Alexey Kuznetsov found some problems in the pi-futex code. One of the root causes is: When a wakeup happens, we do not to stop the chain walk so we follow a not longer relevant locking chain. Drop out when this happens. Signed-off-by:
-
Thomas Gleixner authored
Alexey Kuznetsov found some problems in the pi-futex code. The major problem is a stale return value in rt_mutex_slowlock(): When the pi chain walk returns -EDEADLK, but the waiter was woken up during the phases where the locks were dropped, the rtmutex could be acquired, but due to the stale return value -EDEADLK returned to the caller. Reset the return value in the retry path. Signed-off-by:
-
Tejun Heo authored
sata_promise uses two different command modes - packet and TF. Packet mode is intelligent low-overhead mode while TF is the same old taskfile interface. As with other advanced interface (ahci/sil24), ATA_TFLAG_POLLING has no effect in packet mode. However, PIO commands are issued using TF interface in polling mode, so pdc_interrupt() considers interrupts spurious if ATA_TFLAG_POLLING is set. This is broken for polling NODATA commands because command is issued using packet mode but the interrupt handler ignores it due to ATA_TFLAG_POLLING. Fix pdc_qc_issue_prot() such that ATA/ATAPI NODATA commands are issued using TF interface if ATA_TFLAG_POLLING is set. This patch fixes detection failure introduced by polling SETXFERMODE. Signed-off-by:
Tejun Heo <htejun@gmail.com> Acked-by:
Mikael Pettersson <mikpe@it.uu.se> Acked-by:
-
Randy Dunlap authored
__exit function is used by both init and exit routines, so it cannot be marked __init. (from allyesconfig) WARNING: drivers/built-in.o(.text+0x9b83cf): Section mismatch: reference to .exit.text: (between 'divasfunc_exit' and 'didd_callback') Signed-off-by:
Armin Schindler <armin@melware.de> Signed-off-by:
-
Jeff Dike authored
Include linux/kernel.h wherever simple_strtoul is used. This kills a compile warning in stderr_console.c and potential ones in the other files. This also fixes a bunch of style violations in exitcode.c. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
-
Jiri Slaby authored
do not return 0 in one case and return proper values in other 2. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
this causes oops, because pci probe function calls tty_register_device for each device found. Thanks to Ingo. Signed-off-by:
-
Jiri Slaby authored
Since it's not neccesary to have MAX_PANELS on the card, don't fail to let users use this card even in this case. Stop the testing for loop instead. Thanks to Ingo. Signed-off-by:
-
Stephen Rothwell authored
into the appropriate #ifdef. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
-
Ratnadeep Joshi authored
Signed-off-by:
-
Jeff Dike authored
Force KERNEL_STACK_ORDER to be at least 1 on UML/x86_64, to avoid overflows. Signed-off-by:
-
Christoph Lameter authored
Instead of returning the smallest available object return ZERO_SIZE_PTR. A ZERO_SIZE_PTR can be legitimately used as an object pointer as long as it is not deferenced. The dereference of ZERO_SIZE_PTR causes a distinctive fault. kfree can handle a ZERO_SIZE_PTR in the same way as NULL. This enables functions to use zero sized object. e.g. n = number of objects. objects = kmalloc(n * sizeof(object)); for (i = 0; i < n; i++) objects[i].x = y; kfree(objects); Signed-off-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Yoann Padioleau authored
Fix various bits of obviously-busted code which we're not happening to compile, due to ifdefs. Signed-off-by:
Yoann Padioleau <padator@wanadoo.fr> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by:
Paul Mundt <lethal@linux-sh.org> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Christoph Lameter authored
cache_free_alien must be called regardless if we use alien caches or not. cache_free_alien() will do the right thing if there are no alien caches available. Signed-off-by:
-
