- 25 Feb, 2022 4 commits
-
-
Raphael Gallais-Pou authored
This patch adds the CRC hashing feature supported by some recent hardware versions of the LTDC. This is useful for test suite such as IGT-GPU-tools [1] where a CRTC output frame can be compared to a test reference frame thanks to their respective CRC hash. [1] https://cgit.freedesktop.org/drm/igt-gpu-toolsSigned-off-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Acked-by:
Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211104620.421177-1-raphael.gallais-pou@foss.st.com
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/stm/ltdc.c:625:2: warning: variable 'val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/gpu/drm/stm/ltdc.c:635:2: note: uninitialized use occurs here val |= LxPCR_YCEN; ^~~ drivers/gpu/drm/stm/ltdc.c:600:9: note: initialize the variable 'val' to silence this warning u32 val; ^ = 0 1 warning generated. Use a return instead of break in the default case to fix the warning. Add an error message so that this return is not silent, which could hide issues in the future. Fixes: 484e72d3 ("drm/stm: ltdc: add support of ycbcr pixel formats") Link: https://github.com/ClangBuiltLinux/linux/issues/1575Acked-by:Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Kees Cook authored
The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Fixes: 79465e0f ("drm/dp: Add helper to get post-cursor adjustments") Signed-off-by:Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20220105173507.2420910-1-keescook@chromium.orgSigned-off-by:
Thierry Reding <treding@nvidia.com>
-
Kees Cook authored
The pcon_dsc_dpcd array holds 13 registers (0x92 through 0x9E). Fix the math to calculate the max size. Found from a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_pcon_dsc_bpp_incr': drivers/gpu/drm/drm_dp_helper.c:3130:28: error: array subscript 12 is outside array bounds of 'const u8[12]' {aka 'const unsigned char[12]'} [-Werror=array-bounds] 3130 | buf = pcon_dsc_dpcd[DP_PCON_DSC_BPP_INCR - DP_PCON_DSC_ENCODER]; | ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:3126:39: note: while referencing 'pcon_dsc_dpcd' 3126 | int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Fixes: e2e16da3 ("drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon") Cc: stable@vger.kernel.org Reviewed-by:
-
- 24 Feb, 2022 2 commits
-
-
Cai Huoqing authored
The nouveau driver depends on include/linux/list.h instead of nvif/list.h, so remove the obstacle-nvif/list.h. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209065322.43938-1-cai.huoqing@linux.dev
-
Javier Martinez Canillas authored
There is now a drm_fb_xrgb8888_to_mono_reversed() helper function to do format conversion from XRGB8888 to reversed monochrome. Use that helper and remove the open coded version in the repaper driver. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
- 23 Feb, 2022 9 commits
-
-
Hans de Goede authored
Some devices use e.g. a portrait panel in a standard laptop casing made for landscape panels. efifb calls drm_get_panel_orientation_quirk() and sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that it shows up-right instead of on its side. When switching to simpledrm the fbcon renders on its side. Call the drm_connector_set_panel_orientation_with_quirk() helper to add a "panel orientation" property on devices listed in the quirk table, to make the fbcon (and aware userspace apps) rotate the image to display properly. Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Arunpravin authored
create a pot-sized mm, then allocate one of each possible order within. This should leave the mm with exactly one page left. Free the largest block, then whittle down again. Eventually we will have a fully 50% fragmented mm. v2(Matthew Auld): - removed unnecessary test succeeded print - replace list_del()/list_add_tail() with list_move_tail() Signed-off-by:
Arunpravin <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Acked-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-7-Arunpravin.PaneerSelvam@amd.comSigned-off-by:
-
Arunpravin authored
- add a test to ascertain that the critical functionalities of the program is working fine - add a timeout helper function v2: - removed unnecessary test succeeded print - replace list_del()/list_add_tail() with list_move_tail() Signed-off-by:
-
Arunpravin authored
create a pot-sized mm, then allocate one of each possible order within. This should leave the mm with exactly one page left. v2: - removed unnecessary test succeeded print - replace list_del()/list_add_tail() with list_move_tail() Signed-off-by:
-
Arunpravin authored
create a mm with one block of each order available, and try to allocate them all. v2(Matthew Auld): - removed unnecessary test succeeded print - replace list_del()/list_add_tail() with list_move_tail() Signed-off-by:
-
Arunpravin authored
- add a test to check the range allocation - export get_buddy() function in drm_buddy.c - export drm_prandom_u32_max_state() in lib/drm_random.c - include helper functions - include prime number header file v2: - add drm_get_buddy() function description (Matthew Auld) - removed unnecessary test succeeded print Signed-off-by:
-
Arunpravin authored
add a test to check the maximum allocation limit v2(Matthew Auld): - added err = -EINVAL in block NULL check - removed unnecessary test succeeded print Signed-off-by:
-
Arunpravin authored
- move i915 buddy selftests into drm selftests folder - add Makefile and Kconfig support - add sanitycheck testcase Prerequisites - These series of selftests patches are created on top of drm buddy series - Enable kselftests for DRM as a module in .config Signed-off-by:
-
Jiawei Gu authored
Add device pointer so scheduler's printing can use DRM_DEV_ERROR() instead, which makes life easier under multiple GPU scenario. v2: amend all calls of drm_sched_init() v3: fill dev pointer for all drm_sched_init() calls Signed-off-by:
Jiawei Gu <Jiawei.Gu@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
- 22 Feb, 2022 3 commits
-
-
Arunpravin authored
On contiguous allocation, we round up the size to the *next* power of 2, implement a function to free the unused pages after the newly allocate block. v2(Matthew Auld): - replace function name 'drm_buddy_free_unused_pages' with drm_buddy_block_trim - replace input argument name 'actual_size' with 'new_size' - add more validation checks for input arguments - add overlaps check to avoid needless searching and splitting - merged the below patch to see the feature in action - add free unused pages support to i915 driver - lock drm_buddy_block_trim() function as it calls mark_free/mark_split are all globally visible v3(Matthew Auld): - remove trim method error handling as we address the failure case at drm_buddy_block_trim() function v4: - in case of trim, at __alloc_range() split_block failure path marks the block as free and removes it from the original list, potentially also freeing it, to overcome this problem, we turn the drm_buddy_block_trim() input node into a temporary node to prevent recursively freeing itself, but still retain the un-splitting/freeing of the other nodes(Matthew Auld) - modify the drm_buddy_block_trim() function return type v5(Matthew Auld): - revert drm_buddy_block_trim() function return type changes in v4 - modify drm_buddy_block_trim() passing argument n_pages to original_size as n_pages has already been rounded up to the next power-of-two and passing n_pages results noop v6: - fix warnings reported by kernel test robot <lkp@intel.com> v7: - modify drm_buddy_block_trim() function doc description - at drm_buddy_block_trim() handle non-allocated block as a serious programmer error - fix a typo Signed-off-by: -
Arunpravin authored
Implemented a function which walk through the order list, compares the offset and returns the maximum offset block, this method is unpredictable in obtaining the high range address blocks which depends on allocation and deallocation. for instance, if driver requests address at a low specific range, allocator traverses from the root block and splits the larger blocks until it reaches the specific block and in the process of splitting, lower orders in the freelist are occupied with low range address blocks and for the subsequent TOPDOWN memory request we may return the low range blocks.To overcome this issue, we may go with the below approach. The other approach, sorting each order list entries in ascending order and compares the last entry of each order list in the freelist and return the max block. This creates sorting overhead on every drm_buddy_free() request and split up of larger blocks for a single page request. v2: - Fix alignment issues(Matthew Auld) - Remove unnecessary list_empty check(Matthew Auld) - merged the below patch to see the feature in action - add top-down alloc support to i915 driver Signed-off-by: -
Arunpravin authored
- Make drm_buddy_alloc a single function to handle range allocation and non-range allocation demands - Implemented a new function alloc_range() which allocates the requested power-of-two block comply with range limitations - Moved order computation and memory alignment logic from i915 driver to drm buddy v2: merged below changes to keep the build unbroken - drm_buddy_alloc_range() becomes obsolete and may be removed - enable ttm range allocation (fpfn / lpfn) support in i915 driver - apply enhanced drm_buddy_alloc() function to i915 driver v3(Matthew Auld): - Fix alignment issues and remove unnecessary list_empty check - add more validation checks for input arguments - make alloc_range() block allocations as bottom-up - optimize order computation logic - replace uint64_t with u64, which is preferred in the kernel v4(Matthew Auld): - keep drm_buddy_alloc_range() function implementation for generic actual range allocations - keep alloc_range() implementation for end bias allocations v5(Matthew Auld): - modify drm_buddy_alloc() passing argument place->lpfn to lpfn as place->lpfn will currently always be zero for i915 v6(Matthew Auld): - fixup potential uaf - If we are unlucky and can't allocate enough memory when splitting blocks, where we temporarily end up with the given block and its buddy on the respective free list, then we need to ensure we delete both blocks, and no just the buddy, before potentially freeing them - fix warnings reported by kernel test robot <lkp@intel.com> v7(Matthew Auld): - revert fixup potential uaf - keep __alloc_range() add node to the list logic same as drm_buddy_alloc_blocks() by having a temporary list variable - at drm_buddy_alloc_blocks() keep i915 range_overflows macro and add a new check for end variable v8: - fix warnings reported by kernel test robot <lkp@intel.com> v9(Matthew Auld): - remove DRM_BUDDY_RANGE_ALLOCATION flag - remove unnecessary function description v10: - keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag and replacing with (end < size) logic fails amdgpu driver load Signed-off-by:
-
- 21 Feb, 2022 1 commit
-
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
-
- 20 Feb, 2022 3 commits
-
-
Linus Walleij authored
Add some code and config to also support the ACX424AKM used in some Sony (Ericsson) Mobile phones. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-3-linus.walleij@linaro.org
-
Linus Walleij authored
These IDs were found in the wild in a Sony Xperia vendor tree. Signed-off-by:
-
Linus Walleij authored
A code drop from Sony Mobile reveals that the ACX424 panels are built around the Novatek NT35560 panel controllers so just bite the bullet and rename the driver and all basic symbols so that we can modify this driver to cover any other panels also using the Novatek NT35560 display controller. Signed-off-by:
-
- 16 Feb, 2022 12 commits
-
-
Sankeerth Billakanti authored
Add support for the 14" sharp,lq140m1jw46 eDP panel. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Sankeerth Billakanti authored
Add support for sharp LQ140M1JW46 display panel. It is a 14" eDP panel with 1920x1080 display resolution. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Thomas Zimmermann authored
Fbdev's deferred I/O sorts all dirty pages by default, which incurs a significant overhead. Make the sorting step optional and update the few drivers that require it. Use a FIFO list by default. Most fbdev drivers with deferred I/O build a bounding rectangle around the dirty pages or simply flush the whole screen. The only two affected DRM drivers, generic fbdev and vmwgfx, both use a bounding rectangle. In those cases, the exact order of the pages doesn't matter. The other drivers look at the page index or handle pages one-by-one. The patch sets the sort_pagelist flag for those, even though some of them would probably work correctly without sorting. Driver maintainers should update their driver accordingly. Sorting pages by memory offset for deferred I/O performs an implicit bubble-sort step on the list of dirty pages. The algorithm goes through the list of dirty pages and inserts each new page according to its index field. Even worse, list traversal always starts at the first entry. As video memory is most likely updated scanline by scanline, the algorithm traverses through the complete list for each updated page. For example, with 1024x768x32bpp each page covers exactly one scanline. Writing a single screen update from top to bottom requires updating 768 pages. With an average list length of 384 entries, a screen update creates (768 * 384 =) 294912 compare operation. Fix this by making the sorting step opt-in and update the few drivers that require it. All other drivers work with unsorted page lists. Pages are appended to the list. Therefore, in the common case of writing the framebuffer top to bottom, pages are still sorted by offset, which may have a positive effect on performance. Playing a video [1] in mplayer's benchmark mode shows the difference (i7-4790, FullHD, simpledrm, kernel with debugging). mplayer -benchmark -nosound -vo fbdev ./big_buck_bunny_720p_stereo.ogg With sorted page lists: BENCHMARKs: VC: 32.960s VO: 73.068s A: 0.000s Sys: 2.413s = 108.441s BENCHMARK%: VC: 30.3947% VO: 67.3802% A: 0.0000% Sys: 2.2251% = 100.0000% With unsorted page lists: BENCHMARKs: VC: 31.005s VO: 42.889s A: 0.000s Sys: 2.256s = 76.150s BENCHMARK%: VC: 40.7156% VO: 56.3219% A: 0.0000% Sys: 2.9625% = 100.0000% VC shows the overhead of video decoding, VO shows the overhead of the video output. Using unsorted page lists reduces the benchmark's run time by ~32s/~25%. v2: * Make sorted pagelists the special case (Sam) * Comment on drivers' use of pagelist (Sam) * Warn about the overhead in comment Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_stereo.ogg # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Return early if a page is already in the list of dirty pages for deferred I/O. This can be detected if the page's list head is not empty. Keep the list head initialized while the page is not enlisted to make this work reliably. v2: * update comment and fix spelling (Sam) Signed-off-by:
-
Javier Martinez Canillas authored
The ssd130x DRM driver also makes use of this Device Tree binding to allow existing users of the fbdev driver to migrate without the need to change their Device Trees. Add myself as another maintainer of the binding, to make sure that I will be on Cc when patches are proposed for it. Suggested-by:
-
Javier Martinez Canillas authored
To make sure that tools like the get_maintainer.pl script will suggest to Cc me if patches are posted for this driver. Also include the Device Tree binding for the old ssd1307fb fbdev driver since the new DRM driver was made compatible with the existing binding. Signed-off-by:
-
Javier Martinez Canillas authored
The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over I2C. Signed-off-by:
-
Javier Martinez Canillas authored
This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon OLED display controllers. It's only the core part of the driver and a bus specific driver is needed for each transport interface supported by the display controllers. Signed-off-by:
-
Javier Martinez Canillas authored
Add support to convert from XR24 to reversed monochrome for drivers that control monochromatic display panels, that only have 1 bit per pixel. The function does a line-by-line conversion doing an intermediate step first from XR24 to 8-bit grayscale and then to reversed monochrome. The drm_fb_gray8_to_mono_reversed_line() helper was based on code from drivers/gpu/drm/tiny/repaper.c driver. Signed-off-by:
-
Javier Martinez Canillas authored
Pull the per-line conversion logic into a separate helper function. This will allow to do line-by-line conversion in other helpers that convert to a gray8 format. Suggested-by:
-
Ville Syrjälä authored
There is no object id in drm_display_mode anymore. Remove stale comments to the contrary. Signed-off-by:
-
Minghao Chi (CGEL ZTE) authored
Use of_device_get_match_data() to simplify the code. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by:
-
- 15 Feb, 2022 4 commits
-
-
Douglas Anderson authored
Recently we added generic "edp-panel"s probed by EDID. To support panels in this way we look at the panel ID in the EDID and look up the panel in a table that has power sequence timings. If we find a panel that's not in the table we will still attempt to use it but we'll use conservative timings. While it's likely that these conservative timings will work for most nearly all panels, the performance of turning the panel off and on suffers. We'd like to be able to reliably detect the case that we're using the hardcoded timings without relying on parsing dmesg. This allows us to implement tests that ensure that no devices get shipped that are relying on the conservative timings. Let's add a new debugfs entry to panel devices. It will have one of: * UNKNOWN - We tried to detect a panel but it wasn't in our table. * HARDCODED - We're not using generic "edp-panel" probed by EDID. * A panel name - This is the name of the panel from our table. Signed-off-by:
-
Douglas Anderson authored
We'd like panels to be able to add things to debugfs underneath the connector's directory. Let's plumb it through. A panel will be able to put things in a "panel" directory under the connector's directory. Note that debugfs is not ABI and so it's always possible that the location that the panel gets for its debugfs could change in the future. NOTE: this currently only works if you're using a modern architecture. Specifically the plumbing relies on _both_ drm_bridge_connector and drm_panel_bridge. If you're not using one or both of these things then things won't be plumbed through. As a side effect of this change, drm_bridges can also get callbacks to put stuff underneath the connector's debugfs directory. At the moment all bridges in the chain have their debugfs_init() called with the connector's root directory. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
-
Douglas Anderson authored
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge connector. It should use the normal drm_bridge_connector. Let's switch to do that, removing all of the custom code. NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR support for ti-sn65dsi86 and that would still be a useful thing to do in the future. It was attempted in the past [1] but put on the back burner. However, unless we instantly change ti-sn65dsi86 fully from not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_ supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit of time when we support both. This is a better way to support the old way where the driver hand rolls things itself. A new notes about the implementation here: * When using the drm_bridge_connector the connector should be created after all the bridges, so we change the ordering a bit. * I'm reasonably certain that we don't need to do anything to "free" the new drm_bridge_connector. If drm_bridge_connector_init() returns success then we know drm_connector_init() was called with the `drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a .destroy() that does all the cleanup. drm_connector_init() calls __drm_mode_object_add() with a drm_connector_free() that will call the .destroy(). * I'm also reasonably certain that I don't need to "undo" the drm_bridge_attach() if drm_bridge_connector_init() fails. The "detach" function is private and other similar code doesn't try to undo the drm_bridge_attach() in error cases. There's also a comment indicating the lack of balance at the top of drm_bridge_attach(). [1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.comSigned-off-by:
-
Christian König authored
Use the one provided by TTM instead. v2: drop new_mem parameter as well Signed-off-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by:
-
- 14 Feb, 2022 2 commits
-
-
Pin-Yen Lin authored
The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable. Fixes: 8bdfc5da ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by:
Pin-Yen Lin <treapking@chromium.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
-
Christian König authored
This is provided by TTM now. Also switch man->size to bytes instead of pages and fix the double printing of size and usage in debugfs. v2: fix size checking as well Signed-off-by:
-
