- 22 Sep, 2022 30 commits
-
-
Sergiu Moga authored
The Devicetree nodes for FLEXCOM's USART can also have an alternative clock source for the baudrate generator (other than the peripheral clock), namely the Generick Clock. Thus make the binding aware of this clock that someone may place in the clock related properties of the USART node. Signed-off-by:
Sergiu Moga <sergiu.moga@microchip.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220922113347.144383-6-sergiu.moga@microchip.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergiu Moga authored
Require SAM9260 fallback compatible for SAM9X60, because SAM9X60 is fully compatible with SAM9260 and Linux driver requires the latter. Signed-off-by:
-
Sergiu Moga authored
Convert at91 USART DT Binding for Atmel/Microchip SoCs to json-schema format. Furthermore, move this binding to the serial directory, since binding directories match hardware, unlike the driver subsystems which match Linux convention. Signed-off-by:
-
Sherry Sun authored
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed after they are relinquished. Otherwise, when try to kill btattach, kernel may panic. This patch may fix this issue. root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200 ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 90.189806] Modules linked in: moal(O) mlan(O) [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37 [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT) [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60 [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c [ 90.225237] sp : ffff800013f0bac0 [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800 [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00 [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000 [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000 [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040 [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090 [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804 [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480 [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800 [ 90.299876] Call trace: [ 90.302321] fsl_edma3_disable_request+0x8/0x60 [ 90.306851] lpuart_flush_buffer+0x40/0x160 [ 90.311037] uart_flush_buffer+0x88/0x120 [ 90.315050] tty_driver_flush_buffer+0x20/0x30 [ 90.319496] hci_uart_flush+0x44/0x90 [ 90.323162] +0x34/0x12c [ 90.327253] tty_ldisc_close+0x38/0x70 [ 90.331005] tty_ldisc_release+0xa8/0x190 [ 90.335018] tty_release_struct+0x24/0x8c [ 90.339022] tty_release+0x3ec/0x4c0 [ 90.342593] __fput+0x70/0x234 [ 90.345652] ____fput+0x14/0x20 [ 90.348790] task_work_run+0x84/0x17c [ 90.352455] do_exit+0x310/0x96c [ 90.355688] do_group_exit+0x3c/0xa0 [ 90.359259] __arm64_sys_exit_group+0x1c/0x20 [ 90.363609] invoke_syscall+0x48/0x114 [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc [ 90.372068] do_el0_svc+0x2c/0x94 [ 90.375379] el0_svc+0x28/0x80 [ 90.378438] el0t_64_sync_handler+0xa8/0x130 [ 90.382711] el0t_64_sync+0x1a0/0x1a4 [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041) [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]--- [ 90.397073] note: btattach[503] exited with preempt_count 1 [ 90.402636] Fixing recursive fault but reboot is needed! Fixes: 6250cc30 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx") Reviewed-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
Thara Gopinath <tgopinath@microsoft.com> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com Signed-off-by:
-
Ilpo Järvinen authored
Invoking TIOCVHANGUP on 8250_mid port on Ice Lake-D and then reopening the port triggers these faults during serial8250_do_startup(): DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set If the IRQ hasn't been set up yet, the UART will have zeroes in its MSI address/data registers. Disabling the IRQ at the interrupt controller won't stop the UART from performing a DMA write to the address programmed in its MSI address register (zero) when it wants to signal an interrupt. The UARTs (in Ice Lake-D) implement PCI 2.1 style MSI without masking capability, so there is no way to mask the interrupt at the source PCI function level, except disabling the MSI capability entirely, but that would cause it to fall back to INTx# assertion, and the PCI specification prohibits disabling the MSI capability as a way to mask a function's interrupt service request. The MSI address register is zeroed by the hangup as the irq is freed. The interrupt is signalled during serial8250_do_startup() performing a THRE test that temporarily toggles THRI in IER. The THRE test currently occurs before UART's irq (and MSI address) is properly set up. Refactor serial8250_do_startup() such that irq is set up before the THRE test. The current irq setup code is intermixed with the timer setup code. As THRE test must be performed prior to the timer setup, extract it into own function and call it only after the THRE test. The ->setup_timer() needs to be part of the struct uart_8250_ops in order to not create circular dependency between 8250 and 8250_base modules. Fixes: 40b36daa ("[PATCH] 8250 UART backup timer") Reported-by:
Lennert Buytenhek <buytenh@arista.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Maciej W. Rozycki authored
Use BIT_ULL rather than encoding bits explicitly where applicable with UART port flags. This makes a (__force upf_t) cast redundant, but keep it for visual consistency with the flags defined in terms of userspace macros. Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210007030.41633@angie.orcam.me.uk Signed-off-by:
-
Maciej W. Rozycki authored
Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to operate in the enhanced mode via the EFR register for the Divide-by-M N/8 baud rate generator prescaler to be used in their native UART mode. Otherwise the prescaler is fixed at 1 causing grossly incorrect baud rates to be programmed. Accessing the EFR register requires 16550A features to have been probed for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS by setting UPF_FULL_PROBE in port flags. Fixes: 366f6c95 ("serial: 8250: Add proper clock handling for OxSemi PCIe devices") Cc: stable@vger.kernel.org # v5.19+ Reported-by:
Anders Blomdell <anders.blomdell@control.lth.se> Signed-off-by:
-
Maciej W. Rozycki authored
A SERIAL_8250_16550A_VARIANTS configuration option has been recently defined that lets one request the 8250 driver not to probe for 16550A device features so as to reduce the driver's device startup time in virtual machines. Some actual hardware devices require these features to have been fully determined however for their driver to work correctly, so define a flag to let drivers request full 16550A feature probing on a device-by-device basis if required regardless of the SERIAL_8250_16550A_VARIANTS option setting chosen. Fixes: dc56ecb8 ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants") Cc: stable@vger.kernel.org # v5.6+ Reported-by:
-
Jiri Slaby authored
This non-trivial code is doubled in transmit_chars(), so it deserves its own function. This will make next patches easier. Reviewed-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220920052049.20507-8-jslaby@suse.cz Signed-off-by:
-
Jiri Slaby authored
mpc52xx_uart_int_rx_chars() returns unsigned int. mpc52xx_uart_int_tx_chars() returns int. The both results are binary ORed to the "keepgoing" variable. Unify all three to bool as the only interesting value is whether we should keep looping (true/false). Reviewed-by:
-
Jiri Slaby authored
The condition in __serial_lpc32xx_tx()'s loop is barely readable. Extract it to a separate function. This will make the cleanup in the next patches easier too. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: <linux-arm-kernel@lists.infradead.org> Reviewed-by:
-
Jiri Slaby authored
The condition in lqasc_tx_chars()'s loop is barely readable. Extract it to a separate function. This will make the cleanup in the next patches easier too. (Put it before lqasc_start_tx(), so that we can use it there later.) Signed-off-by:
-
Jiri Slaby authored
Both altera_uart_{r,t}x_chars() need only uart_port, not altera_uart. So pass the former from altera_uart_interrupt() directly. Apart it maybe saves a dereference, this makes the transition of altera_uart_tx_chars() easier to follow in the next patch. Cc: Tobias Klauser <tklauser@distanz.ch> Reviewed-by:Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Jiri Slaby authored
The "stop TX" path in altera_uart_tx_chars() is open-coded, so: * use uart_circ_empty() to check if the buffer is empty, and * when true, call altera_uart_stop_tx(). Cc: Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
-
Jiri Slaby authored
Make vt8500_tx_empty() more readable by introducing a new local variable and move the function before handle_tx(). That way we can reuse it in there too. Cc: <linux-arm-kernel@lists.infradead.org> Reviewed-by:
-
наб authored
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" This stretches that definition slightly, since it multiplexes it with the terminal number as a constant offset, but is equivalent Acked-by:
Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Ref: https://lore.kernel.org/linux-doc/YyMlovoskUcHLEb7@kroah.com/ Link: https://lore.kernel.org/r/8c8a2c9dfc1bfbe6ef3f3237368e483865fc1c29.1663288066.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by:
-
наб authored
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by:
-
наб authored
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by:
-
наб authored
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by:
-
наб authored
According to Greg, in the context of magic numbers as defined in magic-number.rst, "the tty layer should not need this and I'll gladly take patches" Acked-by:
-
Dan Carpenter authored
This error path needs to unwind instead of just returning directly. Fixes: 03a8482c ("drivers: serial: jsm: Enable support for Digi Classic adapters") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili Signed-off-by:
-
Johan Jonker authored
Add rockchip,rk3128-uart compatible string. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Jamie Iles <jamie@jamieiles.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/4f283231-2ed4-202b-0c23-157bce0841ee@gmail.com Signed-off-by:
-
Lukas Wunner authored
The serial-omap driver requires an rts-gpio for RS-485 to work. Historically it has allowed enabling RS-485 even if no rts-gpio was specified in the device tree. That doesn't make any sense, so disable RS-485 on probe if rts-gpio is missing and disallow user space from enabling it. Three NULL pointer checks for up->rts_gpiod can be dropped as a result, simplifying the driver slightly. Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/f191dcca0d8ea03598c463fc0d3fba8941ff2275.1662888075.git.lukas@wunner.de Signed-off-by:
-
Gaosheng Cui authored
cpm_uart_nr has been removed since commit 0b2a2e5b ("cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220911093654.3222701-1-cuigaosheng1@huawei.com Signed-off-by:
-
Daniel Starke authored
A debug bit to output a complete transmission dump exists. Sometimes only the user frames are relevant. Add an additional bit which limits the transmission dump output to user data frames if set. Signed-off-by:
Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220831073800.7459-6-daniel.starke@siemens.com Signed-off-by:
-
Daniel Starke authored
Introduce defines to name the various debug bits used within the code to improve readability and to make its specific use clear. Signed-off-by:
-
Daniel Starke authored
Move the content of gsm_control_transmit() to a new function gsm_control_command() with a more generic signature and analog to gsm_control_reply(). Use this within gsm_control_transmit(). This is needed to simplify upcoming functional additions. Signed-off-by:
-
Daniel Starke authored
Replace the use of gsm_read_ea() with gsm_read_ea_val() where applicable to improve code readability and avoid errors like in the past. See first link below for reference. Link: https://lore.kernel.org/all/20220504081733.3494-1-daniel.starke@siemens.com/ Link: https://lore.kernel.org/all/202208222147.WfFRmf1r-lkp@intel.com/ Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Daniel Starke authored
Add a macro which defines the possible number of virtual devices for n_gsm to improve code readability. Reviewed-by:
-
Daniel Starke authored
Add an enumeration for the gsm mux encoding types to improve code readability and to avoid invalid values. Only two values are defined by the standard: - basic option mode - advanced option mode (uses ISO HDLC standard transparency mechanism) Signed-off-by:
-
- 09 Sep, 2022 7 commits
-
-
Al Viro authored
mandatory-y will have the generic picked for architectures that don't have uapi/asm/termios.h of their own. ia64, parisc and s390 ones are identical to generic, so... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/YxGVXpS2dWoTwoa0@ZenIV Signed-off-by:
-
Al Viro authored
All non-UAPI asm/termios.h consist of include of UAPI counterpart and, possibly, include of linux/uaccess.h The latter can't be simply removed, even though nothing in linux/termios.h doesn't depend upon it anymore - there are several places that rely upon that indirect chain of includes to pull linux/uaccess.h. So the include needs to be lifted out of there - we lift into tty_driver.h, serdev.h and places that pull asm/termios.h, but none of * linux/uaccess.h (obvious) * net/sock.h (pulls uaccess.h) * linux/{tty,tty_driver,serdev}.h (tty.h pulls tty_driver.h) That leaves us just with the include of UAPI asm/termios.h, which is what <asm/termios.h> will resolve to if we simply remove non-UAPI header. Signed-off-by: -
Al Viro authored
Signed-off-by:
-
Al Viro authored
turn it into an array initializer; then alpha, mips and powerpc variants fold into it. Signed-off-by:
-
Al Viro authored
On old systems it used to be ^O. Linux had never actually used the value, but INIT_C_CC (on i386) did initialize it to ^O; unfortunately, it had a typo in the comment claiming that to be ^U. Most of the architectures copied the (correct) definition along with mistaken comment. alpha, powerpc and sparc tried to make the definition match comment. However, util-linux still resets it to ^O on any architecture, ^O is the historical value, kernel ignores it anyway and finally, Linus said "Just change everybody to do the same, nobody cares about VDISCARD". Signed-off-by:
-
Al Viro authored
* new header (linut/termios_internal.h), pulled by the users of those suckers * defaults for INIT_C_CC and externs for conversion helpers moved over there * remove termios-base.h (empty now) Signed-off-by:
-
Al Viro authored
default go into drivers/tty/tty_ioctl.c, unusual - into arch/*/kernel/termios.c (only alpha and sparc have those). Signed-off-by:
-
- 08 Sep, 2022 1 commit
-
-
Vijaya Krishna Nivarthi authored
In suspend/resume routines, icc flags are hardcoded. Replace the hardcodes with macros available from header. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1662564702-7253-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by:
-
- 05 Sep, 2022 1 commit
-
-
Greg Kroah-Hartman authored
We need the tty/serial fixes in here as well. Signed-off-by:
-
- 04 Sep, 2022 1 commit
-
-
Linus Torvalds authored
-
