- 01 Jul, 2013 40 commits
-
-
Jonas Gorski authored
BCM6328 has a OTP which tells us if the second core is available. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/5490/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Kevin Cernekee authored
This involves two changes to the BSP code: 1) register_smp_ops() for BMIPS SMP 2) The CPU1 boot vector on some of the BCM63xx platforms conflicts with the special interrupt vector (IV). Move it to 0x8000_0380 at boot time, to resolve the conflict. Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> [jogo@openwrt.org: moved SMP ops registration into ifdef guard, changed ifdef guards to if (IS_ENABLED())] Signed-off-by:
-
Florian Fainelli authored
MIPS does define read{b,w,l,q}_relaxed but does not define their write counterparts: write{b,w,l,q}_relaxed. This patch adds the missing definitions for the write*_relaxed I/O accessors. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Acked-by:
John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5352/Signed-off-by:
-
Markos Chandras authored
The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move it to the CONFIG_MIPS symbol so it's always selected for MIPS. This fixes the missing pci_iomap declaration for MIPS. Moreover, the pci_iounmap function was not defined in the io.h header file if the CONFIG_PCI symbol is not set, but it should since MIPS is not using CONFIG_GENERIC_IOMAP. This fixes the following problem on a allyesconfig: drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Acked-by:
Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5478/Signed-off-by:
-
Leonid Yegoshin authored
Add GCMP detection for IASim Marvell chip emulation support. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by:
-
Leonid Yegoshin authored
This reverts commit 3f4579252aa166641861a64f1c2883365ca126c2. It is invalid because the macros CAC_ADDR and UNCAC_ADDR have a kernel virtual address as an argument and also returns a kernel virtual address. Using and physical address PHYS_OFFSET is blatantly wrong for a macro common to multiple platforms. Signed-off-by:
-
Deng-Cheng Zhu authored
Now that KSPD is gone, kspd.h has no reason to be there. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kevink@paralogos.com Cc: macro@linux-mips.org Cc: john@phrozen.org Patchwork: https://patchwork.linux-mips.org/patch/5060/Signed-off-by:
-
Markos Chandras authored
SSB_EMBEDDED needs functions from driver_pcicore which are only available if SSD_DRIVER_HOSTMODE is selected so make it depend on that symbol. Fixes the following linking problem: drivers/ssb/embedded.c:202: undefined reference to `ssb_pcicore_plat_dev_init' drivers/built-in.o: In function `ssb_pcibios_map_irq': drivers/ssb/embedded.c:247: undefined reference to `ssb_pcicore_pcibios_map_irq' Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Steven J. Hill authored
The ISA exception bit selects whether exceptions are taken in classic or microMIPS mode. This bit is Config3.ISAOnExc and was improperly defined as bits 16 and 17 instead of just bit 16. A new function was added so that platforms could set this bit when running a kernel compiled with only microMIPS instructions. Signed-off-by:
-
David Daney authored
In mm_isBranchInstr() we can short circuit the entire function if !cpu_has_mmips. Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
-
David Daney authored
It is only used from within a single file, it should not be globally visible. Signed-off-by:
-
Tony Wu authored
Signed-off-by:
Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5535/Signed-off-by:
-
Tony Wu authored
Signed-off-by:
-
Florian Fainelli authored
BMIPS43xx CPUs have two hardware threads, and on some SoCs such as 3368, the bootloader has configured the system to boot from TP1 instead of the more usual TP0. Create the physical to logical CPU mapping to cope with that, do not remap the software interrupts to be cross CPUs such that we do not have to do use the logical CPU mapping further down the code, and finally, reset the slave TP1 only if booted from TP0. Signed-off-by:
-
David Daney authored
As Jonas Gorske said in his patch: Disable cpu_has_mmips for everything but SEAD3 and MALTA. Most of these platforms are from before the micromips introduction, so they are very unlikely to implement it. Reduces an -Os compiled, uncompressed kernel image by 8KiB for BCM63XX. This patch taks a different approach than his, we gate the runtime test for microMIPS by the config symbol SYS_SUPPORTS_MICROMIPS. Signed-off-by:
-
Tony Wu authored
There is an infinite loop in gic_set_affinity. When irq_set_affinity gets called on gic controller, it blocks forever. Signed-off-by:
-
David Daney authored
The ABI allows these to be clobbered on syscalls, so only save and restore the multiplier state when the temporary registers need to be preserved. Signed-off-by:
-
Aaro Koskinen authored
Enable interfaces on EdgeRouter Lite. Tested with cavium_octeon_defconfig and busybox shell. DHCP & ping works with eth0, eth1 and eth2. The board type "UBNT_E100" is taken from the sources of the vendor kernel shipped with the product. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
-
Jayachandran C authored
Prepare of a next patch which will call tlbmiss_handler_setup_pgd on microMIPS. MicroMIPS complains if the called code s not in the .text section. To fix this we generate code into space reserved in arch/mips/mm/tlb-funcs.S While there, move the rest of the generated functions (handle_tlbl, handle_tlbs, handle_tlbm) to the same file. Signed-off-by:
Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5542/Signed-off-by:
-
Ralf Baechle authored
MIPS I is the ancestor of all MIPS ISA and architecture variants. Anything ever build in the MIPS empire is either MIPS I or at least contains MIPS I. If it's running Linux, that is. So there is little point in having cpu_has_mips_1 because it will always evaluate as true - though usually only at runtime. Thus there is no point in having the MIPS_CPU_ISA_I ISA flag, so get rid of it. Little complication: traps.c was using a test for a pure MIPS I ISA as a test for an R3000-style cp0. To deal with that, use a check for cpu_has_3kex or cpu_has_4kex instead. cpu_has_3kex is a new macro. At the moment its default implementation is !cpu_has_4kex but this may eventually change if Linux is ever going to support the oddball MIPS processors R6000 and R8000 so users of either of these macros should not make any assumptions. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
David Daney authored
The serial port changes make it advisable to enable the proper UART drivers. Signed-off-by:
-
David Daney authored
We will use 8250_dw instead. Signed-off-by:
-
David Daney authored
A few differences needed by OCTEON: o These are DWC UARTS, but have USR at a different offset. o Internal SoC buses require reading back from registers to maintain write ordering. o 8250 on OCTEON appears with 64-bit wide registers, so when using readb/writeb in big endian mode we have to adjust the membase to hit the proper part of the register. o No UCV register, so we hard code some properties. Because OCTEON doesn't have a UCV register, I change where dw8250_setup_port(), which reads the UCV, is called by pushing it in to the OF and ACPI probe functions, and move unchanged dw8250_setup_port() earlier in the file. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: Jamie Iles <jamie@jamieiles.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5516/Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
David Daney authored
Following patch to use generic 8250 drivers will need proper clock information. So when using the internal device tree, populate the "clock-frequency" property with the correct value. Signed-off-by:
-
Florian Fainelli authored
Add support for the Netgear CVG834G and enable the two UARTs, Ethernet on the first MAC, PCI and the two leds. Signed-off-by:
-
Florian Fainelli authored
Some boards may need to reset their external PHY or switch they are attached to, add a hook for doing this along with providing custom linux/gpio.h flags for doing this. Signed-off-by:
-
Florian Fainelli authored
The BCM3368 SoC uses a NVRAM format which is not compatible with the one used by CFE, provide a default MAC address which is suitable for use and which is the default one also being used by the bootloader on these chips. Signed-off-by:
-
Florian Fainelli authored
Add the firmware header format which is used by Broadcom Cable Modem SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format structure because it is used by user-land tools to create firmware images for these SoCs and will later be used by a corresponding MTD parser. Signed-off-by:
-
Florian Fainelli authored
The Broadcom BCM3368 Cable Modem SoC is extremely similar to the existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort in the existing code base is required to get it supported. This patch adds support for the following on-chip peripherals: - two UARTS - GPIO - Ethernet - SPI - PCI - NOR Flash The most noticeable difference with 3368 is that it has its peripheral register at 0xfff8_0000 we check that separately in ioremap.h. Since 3368 is identical to 6358 for its clock and reset bits, we use them verbatim. Signed-off-by:
-
Florian Fainelli authored
Enabling BOOT_RAW is mandatory to get a binary image (objcopy from ELF to binary) to work. This does not affect the ELF kernels which are used by CFE on BCM63XX DSL platforms, but is going to be necessary to support BCM63XX on Cable Modem chips such as BCM3368. Signed-off-by:
-
Paul Gortmaker authored
This board has been EOL for many years now; lets not burden people doing build coverage and other tree wide work with working on essentially dead files. [ralf@linux-mips.org: Also remove arch/mips/include/asm/mach-wrppmc/war.h.] Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Patchwork: http://patchwork.linux-mips.org/patch/5503/Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Jonas Gorski authored
Commit 610019ba ("[MIPS] Remove unused function alloc_pci_controller.") removed the function, but left the prototype in the header file. Remove it as well so people don't get tempted to use it and wonder why it doesn't work. Signed-off-by:
-
Jonas Gorski authored
All BCM63XX SoCs starting with BCM6358 have a BMIPS4350 instead of a BMIPS3300, so select it unless support for any of the older SoCs is selected. All BMIPS4350 have only two CPUs, so select the appropriate default. Signed-off-by:
-
Kevin Cernekee authored
MIPS software IRQs 0 and 1 are used for interprocessor signaling (IPI) on BMIPS SMP. Make the board support code aware of them. Signed-off-by:
-
Gregory Fong authored
For non-SMP, uses the new random canary value that is stored in the task struct whenever a new task is forked. Based on ARM version in df0698be and subject to the same limitations: the variable GCC expects, __stack_chk_guard, is global, so this will not work on SMP. Quoting Nicolas Pitre <nico@fluxnic.net>: "One way to overcome this GCC limitation would be to locate the __stack_chk_guard variable into a memory page of its own for each CPU, and then use TLB locking to have each CPU see its own page at the same virtual address for each of them." Signed-off-by:
Gregory Fong <gregory.0xf0@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5488/Signed-off-by:
-
