- 29 Aug, 2023 33 commits
-
-
Zhu Wang authored
Remove kernel-doc warning in exportfs: fs/exportfs/expfs.c:395: warning: Function parameter or member 'parent' not described in 'exportfs_encode_inode_fh' Signed-off-by:
Zhu Wang <wangzhu9@huawei.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
With large NFS WRITE requests on TCP, I measured 5-10 thread wake- ups to receive each request. This is because the socket layer calls ->sk_data_ready() frequently, and each call triggers a thread wake-up. Each recvmsg() seems to pull in less than 100KB. Have the socket layer hold ->sk_data_ready() calls until the full incoming message has arrived to reduce the wake-up rate. Signed-off-by: -
Chuck Lever authored
Flamegraph analysis showed that the cork/uncork calls consume nearly a third of the CPU time spent in svc_tcp_sendto(). The other two consumers are mutex lock/unlock and svc_tcp_sendmsg(). Now that svc_tcp_sendto() coalesces RPC messages properly, there is no need to introduce artificial delays to prevent sending partial messages. After applying this change, I measured a 1.2K read IOPS increase for 8KB random I/O (several percent) on 56Gb IP over IB. Reviewed-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Chuck Lever authored
Commit da1661b9 ("SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends") modified svc_udp_sendto() to use xprt_sock_sendmsg() because we originally believed xprt_sock_sendmsg() would be needed for TLS support. That does not actually appear to be the case. In addition, the linkage between the client and server send code has been a bit of a maintenance headache because of the distinct ways that the client and server handle memory allocation. Going forward, eventually the XDR layer will deal with its buffers in the form of bio_vec arrays, so convert this function accordingly. Signed-off-by:
-
Chuck Lever authored
There is now enough infrastructure in place to combine the stream record marker into the biovec array used to send each outgoing RPC message on TCP. The whole message can be more efficiently sent with a single call to sock_sendmsg() using a bio_vec iterator. Note that this also helps with RPC-with-TLS: the TLS implementation can now clearly see where the upper layer message boundaries are. Before, it would send each component of the xdr_buf (record marker, head, page payload, tail) in separate TLS records. Suggested-by:
-
Chuck Lever authored
Add a helper to convert a whole xdr_buf directly into an array of bio_vecs, then send this array instead of iterating piecemeal over the xdr_buf containing the outbound RPC message. Reviewed-by:
-
Jeff Layton authored
A well-formed NFSv4 ACL will always contain OWNER@/GROUP@/EVERYONE@ ACEs, but there is no requirement for inheritable entries for those entities. POSIX ACLs must always have owner/group/other entries, even for a default ACL. nfsd builds the default ACL from inheritable ACEs, but the current code just leaves any unspecified ACEs zeroed out. The result is that adding a default user or group ACE to an inode can leave it with unwanted deny entries. For instance, a newly created directory with no acl will look something like this: # NFSv4 translation by server A::OWNER@:rwaDxtTcCy A::GROUP@:rxtcy A::EVERYONE@:rxtcy # POSIX ACL of underlying file user::rwx group::r-x other::r-x ...if I then add new v4 ACE: nfs4_setfacl -a A:fd:1000:rwx /mnt/local/test ...I end up with a result like this today: user::rwx user:1000:rwx group::r-x mask::rwx other::r-x default:user::--- default:user:1000:rwx default:group::--- default:mask::rwx default:other::--- A::OWNER@:rwaDxtTcCy A::1000:rwaDxtcy A::GROUP@:rxtcy A::EVERYONE@:rxtcy D:fdi:OWNER@:rwaDx A:fdi:OWNER@:tTcCy A:fdi:1000:rwaDxtcy A:fdi:GROUP@:tcy A:fdi:EVERYONE@:tcy ...which is not at all expected. Adding a single inheritable allow ACE should not result in everyone else losing access. The setfacl command solves a silimar issue by copying owner/group/other entries from the effective ACL when none of them are set: "If a Default ACL entry is created, and the Default ACL contains no owner, owning group, or others entry, a copy of the ACL owner, owning group, or others entry is added to the Default ACL. Having nfsd do the same provides a more sane result (with no deny ACEs in the resulting set): user::rwx user:1000:rwx group::r-x mask::rwx other::r-x default:user::rwx default:user:1000:rwx default:group::r-x default:mask::rwx default:other::r-x A::OWNER@:rwaDxtTcCy A::1000:rwaDxtcy A::GROUP@:rxtcy A::EVERYONE@:rxtcy A:fdi:OWNER@:rwaDxtTcCy A:fdi:1000:rwaDxtcy A:fdi:GROUP@:rxtcy A:fdi:EVERYONE@:rxtcy Reported-by:Ondrej Valousek <ondrej.valousek@diasemi.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2136452Suggested-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
YueHaibing authored
Since commit 49b28684 ("nfsd: Remove deprecated nfsctl system call and related code.") these declarations are unused, so can remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexander Aring authored
This patch fixes races when lockd accesses the global nlm_blocked list. It was mostly safe to access the list because everything was accessed from the lockd kernel thread context but there exist cases like nlmsvc_grant_deferred() that could manipulate the nlm_blocked list and it can be called from any context. Signed-off-by:
Alexander Aring <aahringo@redhat.com> Reviewed-by:
-
Jeff Layton authored
In the event that we can't fetch post_op_attr attributes, we still need to set a value for the after_change. The operation has already happened, so we're not able to return an error at that point, but we do want to ensure that the client knows that its cache should be invalidated. If we weren't able to fetch post-op attrs, then just set the after_change to before_change + 1. The atomic flag should already be clear in this case. Suggested-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Jeff Layton authored
At one time, nfsd would scrape inode information directly out of struct inode in order to populate the change_info4. At that time, the BUG_ON in set_change_info made some sense, since having it unset meant a coding error. More recently, it calls vfs_getattr to get this information, which can fail. If that fails, fh_pre_saved can end up not being set. While this situation is unfortunate, we don't need to crash the box. Move set_change_info to nfs4proc.c since all of the callers are there. Revise the condition for setting "atomic" to also check for fh_pre_saved. Drop the BUG_ON and just have it zero out both change_attr4s when this occurs. Reported-by:
Boyang Xue <bxue@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2223560Signed-off-by:
-
Jeff Layton authored
Collecting pre_op_attrs can fail, in which case it's probably best to fail the whole operation. Change fh_fill_pre_attrs and fh_fill_both_attrs to return __be32, and have the callers check the return code and abort the operation if it's not nfs_ok. Signed-off-by:
-
Jeff Layton authored
I got this today from modpost: WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfsd/nfsd.o Add a module description. Signed-off-by: -
Chuck Lever authored
The svc_ prefix is identified with the SunRPC layer. Although the duplicate reply cache caches RPC replies, it is only for the NFS protocol. Rename the struct to better reflect its purpose. Reviewed-by:
-
Chuck Lever authored
Over time I'd like to see NFS-specific fields moved out of struct svc_rqst, which is an RPC layer object. These fields are layering violations. Reviewed-by:
-
Chuck Lever authored
Avoid holding the bucket lock while freeing cache entries. This change also caps the number of entries that are freed when the shrinker calls to reduce the shrinker's impact on the cache's effectiveness. Reviewed-by:
-
Chuck Lever authored
Enable nfsd_prune_bucket() to drop the bucket lock while calling kfree(). Use the same pattern that Jeff recently introduced in the NFSD filecache. A few percpu operations are moved outside the lock since they temporarily disable local IRQs which is expensive and does not need to be done while the lock is held. Reviewed-by:
-
Chuck Lever authored
For readability, rename to match the other helpers. Reviewed-by:
-
Chuck Lever authored
To reduce contention on the bucket locks, we must avoid calling kfree() while each bucket lock is held. Start by refactoring nfsd_reply_cache_free_locked() into a helper that removes an entry from the bucket (and must therefore run under the lock) and a second helper that frees the entry (which does not need to hold the lock). For readability, rename the helpers nfsd_cacherep_<verb>. Reviewed-by:
-
Chuck Lever authored
These functions are no longer used. Reviewed-by:
-
Chuck Lever authored
All supported encryption types now use the same context import function. Reviewed-by:
-
Chuck Lever authored
This code is now always on, so the ifdef can be removed. Reviewed-by:
-
Chuck Lever authored
We no longer support importing v1 contexts. Reviewed-by:
-
Chuck Lever authored
This function is no longer used. Reviewed-by:
-
Chuck Lever authored
None of this code can be enabled any more. Reviewed-by:
-
Chuck Lever authored
These enctypes can no longer be enabled via CONFIG. Reviewed-by:
-
Chuck Lever authored
The DES3 encryption type is no longer implemented. Reviewed-by:
-
Chuck Lever authored
Make it impossible to enable support for the DES or DES3 Kerberos encryption types in SunRPC. These enctypes were deprecated by RFCs 6649 and 8429 because they are known to be insecure. Reviewed-by:
-
Dai Ngo authored
This patch grants write delegations for OPEN with NFS4_SHARE_ACCESS_WRITE if there is no conflict with other OPENs. Write delegation conflicts with another OPEN, REMOVE, RENAME and SETATTR are handled the same as read delegation using notify_change, try_break_deleg. The NFSv4.0 protocol does not enable a server to determine that a conflicting GETATTR originated from the client holding the delegation versus coming from some other client. With NFSv4.1 and later, the SEQUENCE operation that begins each COMPOUND contains a client ID, so delegation recall can be safely squelched in this case. With NFSv4.0, however, the server must recall or send a CB_GETATTR (per RFC 7530 Section 16.7.5) even when the GETATTR originates from the client holding that delegation. An NFSv4.0 client can trigger a pathological situation if it always sends a DELEGRETURN preceded by a conflicting GETATTR in the same COMPOUND. COMPOUND execution will always stop at the GETATTR and the DELEGRETURN will never get executed. The server eventually revokes the delegation, which can result in loss of open or lock state. Tracepoint added to track whether read or write delegation is granted. Signed-off-by:
Dai Ngo <dai.ngo@oracle.com> Signed-off-by:
-
Chuck Lever authored
Replace the -1 (no limit) with a zero (no reserved space). This prevents certain non-determinant client behavior, such as silly-renaming a file when the only open reference is a write delegation. Such a rename can leave unexpected .nfs files in a directory that is otherwise supposed to be empty. Note that other server implementations that support write delegation also set this field to zero. Suggested-by:
-
Dai Ngo authored
If the GETATTR request on a file that has write delegation in effect and the request attributes include the change info and size attribute then the write delegation is recalled. If the delegation is returned within 30ms then the GETATTR is serviced as normal otherwise the NFS4ERR_DELAY error is returned for the GETATTR. Add counter for write delegation recall due to conflict GETATTR. This is used to evaluate the need to implement CB_GETATTR to adoid recalling the delegation with conflit GETATTR. Signed-off-by:
-
Dai Ngo authored
Remove the check for F_WRLCK in generic_add_lease to allow file_lock to be used for write delegation. First consumer is NFSD. Signed-off-by:
-
Chuck Lever authored
Jeff confirmed his original fix addressed his pynfs test failure, but this same bug also impacted qemu: accessing qcow2 virtual disks using direct I/O was failing. Jeff's fix missed that you have to shorten the bio_vec element by the same amount as you increased the page offset. Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Fixes: c96e2a69 ("sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg") Tested-by:
-
- 27 Aug, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small driver fixes and one larger unused function set removal in the raid class (so no external impact)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic
-
- 26 Aug, 2023 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix an FPU invalidation bug on exec(), and fix a performance regression due to a missing setting of X86_FEATURE_OSXSAVE" * tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4 x86/fpu: Invalidate FPU state correctly on exec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A last minute fix for a regression introduced in the v6.5 merge window. The conversion of the software based interrupt resend mechanism to hlist missed to add a check whether the descriptor is already enqueued and dropped the interrupt descriptor lookup for nested interrupts. The missing check whether the descriptor is already queued causes hlist corruption and can be observed in the wild. The dropped parent descriptor lookup has not yet caused problems, but it would result in stale interrupt line in the worst case. Add the missing enqueued check and bring the descriptor lookup back to cure this" * tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix software resend lockup and nested resend
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and some trivial cleanups" * tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Fix hw_breakpoint_control() for watchpoints LoongArch: Ensure FP/SIMD registers in the core dump file is up to date LoongArch: Put the body of play_dead() into arch_cpu_idle_dead() LoongArch: Add identifier names to arguments of die() declaration LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP LoongArch: Remove <asm/export.h> LoongArch: Replace #include <asm/export.h> with #include <linux/export.h> LoongArch: Remove unneeded #include <asm/export.h> LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's LoongArch: Remove redundant "source drivers/firmware/Kconfig"
-
Johan Hovold authored
The switch to using hlist for managing software resend of interrupts broke resend in at least two ways: First, unconditionally adding interrupt descriptors to the resend list can corrupt the list when the descriptor in question has already been added. This causes the resend tasklet to loop indefinitely with interrupts disabled as was recently reported with the Lenovo ThinkPad X13s after threaded NAPI was disabled in the ath11k WiFi driver. This bug is easily fixed by restoring the old semantics of irq_sw_resend() so that it can be called also for descriptors that have already been marked for resend. Second, the offending commit also broke software resend of nested interrupts by simply discarding the code that made sure that such interrupts are retriggered using the parent interrupt. Add back the corresponding code that adds the parent descriptor to the resend list. Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/ Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org
-
Huacai Chen authored
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally. Otherwise we can't set read watchpoint and write watchpoint separately. Cc: stable@vger.kernel.org Signed-off-by:Huacai Chen <chenhuacai@loongson.cn>
-
