- 13 Apr, 2009 40 commits
-
-
Jean Delvare authored
Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Do a bit of reformatting on the Unevictable-LRU documentation. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
David Howells authored
Point the UNEVICTABLE_LRU config option at the documentation describing the option. Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include in drivers/char/sysrq.c. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Joe Perches authored
commit ddb53d48 ("fbdev: remove cyblafb driver") removed drivers/video/cyblafb.c, but not its .h file Signed-off-by:
Joe Perches <joe@perches.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Jani Monoses" <jani@ubuntu.com> Signed-off-by:
-
Andrea Righi authored
After the introduction of resource counters hierarchies (28dbc4b6) the prototypes of res_counter_init() and res_counter_charge() have been changed. Keep the documentation consistent with the actual function prototypes. Signed-off-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
David Brownell authored
The "simplify spi_write_then_read()" patch included two regressions from the 2.6.27 behaviors: - The data it wrote out during the (full duplex) read side of the transfer was not zeroed. - It fails completely on half duplex hardware, such as Microwire and most "3-wire" SPI variants. So, revert that patch. A revised version should be submitted at some point, which can get the speedup on standard hardware (full duplex) without breaking on less-capable half-duplex stuff. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x] Signed-off-by:
-
Andi Kleen authored
Impact: (nearly) trivial The patch commit da654b74 Author: Srinivasa Ds <srinivasa@in.ibm.com> Date: Tue Sep 23 15:23:52 2008 +0530 signals: demultiplexing SIGTRAP signal forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new number of sigtrap subcodes. Nothing in the tree seems to use it, but presumably something in user space might. So update it. Cc: Srinivasa Ds <srinivasa@in.ibm.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Krzysztof Helt authored
Do not allow modes with unsupported pixel depth. Otherwise, one can hang a computer by setting incorrect value with fbset command. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Randy Dunlap authored
Fix filemap.c kernel-doc warnings: Warning(mm/filemap.c:575): No description found for parameter 'page' Warning(mm/filemap.c:575): No description found for parameter 'waiter' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Eric Sandeen authored
Include <linux/types.h> in fiemap.h. Sam Ravnborg pointed out that this was missing in this newly-exported header which uses the __u32 and __u64 types. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Paul Menzel authored
Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Michal Januszewski authored
sisfb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 bits are always used per pixel. Fix this by setting the length to 8. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: Thomas Winischhofer <thomas@winischhofer.net> Acked-by:
-
Michal Januszewski authored
sa1100fb incorrectly sets the length of the color fields to 8 bits for PSEUDOCOLOR modes for which only 4 bits are used per pixel. Fix this by setting the length to 4 bits for these modes. Signed-off-by:
-
Michal Januszewski authored
s3fb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 or 4 bits are used per pixel. Fix this by setting the length to 8 or 4, respectively. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Geert Uytterhoeven authored
| ipc/mq_sysctl.c:26: warning: 'get_mq' defined but not used Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
Unused after 20dcae32 aka "[PATCH] aio: remove kioctx from mm_struct". Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dave Anderson authored
When an HFS filesystem is unmounted, it leaks a 2-page bitmap. Also, under extreme memory pressure, it's possible that hfs_releasepage() may use a tree pointer that has not been initialized, and if so, the release request should just be rejected. [akpm@linux-foundation.org: free_pages(0) is legal, remove obvious comment] Signed-off-by:
Dave Anderson <anderson@redhat.com> Tested-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Jonathan Cameron authored
Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Matthew Garrett authored
efifb will attempt to ioremap a framebuffer even if its starting address is 0, failing and causing an ugly backtrace in the process. Exit before probing if this is the case. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Michal Januszewski authored
uvesafb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 bits are always used per pixel. Fix this by setting the length to 8. The switch of the DAC width from the default 6 bits to 8 bits is retained and tracked internally in the driver, but never exposed to userspace. Signed-off-by:
Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <syrjala@sci.fi> Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com> Signed-off-by:
-
Michal Januszewski authored
The documentation about the meaning of the color component bitfield lengths in pseudocolor modes is inconsistent. Fix it, so that it indicates the correct interpretation everywhere, i.e. that 1 << length is the number of palette entries. Signed-off-by:
Geert Uytterhoeven <geert.uytterhoeven@gmail.com> Signed-off-by:
-
Andrea Righi authored
fb_notifier_call_chain() is called with info->lock held, i.e. in do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some notifier callbacks, like fbcon_event_notify(), try to re-acquire info->lock again. Remove the lock/unlock_fb_info() in all the framebuffer notifier callbacks' and be sure to always call fb_notifier_call_chain() with info->lock held. Reported-by:
Pavel Roskin <proski@gnu.org> Reported-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Nikanth Karthikesan authored
init/initramfs.c:520: warning: 'clean_rootfs' defined but not used Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <version.h> in drivers/hwmon/hp_accel.c. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Li Zefan authored
s/spicified/specified Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Randy Dunlap authored
Correct typo in email address. Signed-off-by:
-
Jan Dumon authored
Since Denis is no longer working for Option, I will maintain the driver from now on. Signed-off-by:
Jan Dumon <j.dumon@option.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Peter Zijlstra authored
vm knobs should go in the vm table. Probably too late for randomize_va_space though. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: remove xfs_flush_space xfs: flush delayed allcoation blocks on ENOSPC in create xfs: block callers of xfs_flush_inodes() correctly xfs: make inode flush at ENOSPC synchronous xfs: use xfs_sync_inodes() for device flushing xfs: inform the xfsaild of the push target before sleeping xfs: prevent unwritten extent conversion from blocking I/O completion xfs: fix double free of inode xfs: validate log feature fields correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: docbook: make cleandocs kbuild: fix spurious initramfs rebuild Documentation: explain the difference between __bitwise and __bitwise__ kbuild: make it possible for the linker to discard local symbols from vmlinux kbuild: remove pointless strdup() on arguments passed to new_module() in modpost kbuild: fix a few typos in top-level Makefile kbuild: introduce destination-y for exported headers kbuild: use git svn instead of git-svn in setlocalversion kconfig: fix update-po-config to accect backslash in input kbuild: fix option processing for -I in headerdep
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: fix obviously wrong comment ahci: force CAP_NCQ for earlier NV MCPs [libata] sata_via: kill uninit'd var warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits) Input: i8042 - add HP DV9700 to the noloop list Input: arrange drivers/input/misc/Makefile in alphabetical order Input: add AD7879 Touchscreen driver Input: add AD7877 touchscreen driver Input: bf54x-keys - fix typo in warning Input: add driver for S1 button of rb532 Input: generic driver for rotary encoders on GPIOs Input: hilkbd - fix crash when removing hilkbd module Input: atkbd - add quirk for Fujitsu Siemens Amilo PA 1510 Input: atkbd - consolidate force release quirk setup Input: add accelerated touchscreen support for Marvell Zylonite Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events Input: wm97xx - use disable_irq_nosync() for Mainstone Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android Input: fix polling of /proc/bus/input/devices Input: psmouse - add newline to OLPC HGPK touchpad debugging Input: ati_remote2 - check module params Input: ati_remote2 - add per device attrs Input: ati_remote2 - complete suspend support Input: stop autorepeat timer on key release ...
-
Rafael J. Wysocki authored
There is a race between resume from hibernation and the asynchronous scanning of SCSI devices and to prevent it from happening we need to call scsi_complete_async_scans() during resume from hibernation. In addition, if the resume from hibernation is userland-driven, it's better to wait for all device probes in the kernel to complete before attempting to open the resume device. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
git://git.infradead.org/iommu-2.6Linus Torvalds authored
* git://git.infradead.org/iommu-2.6: intel-iommu: Avoid panic() for DRHD at address zero. Intel-IOMMU Alignment Issue in dma_pte_clear_range()
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: add linux kernel support for YMM state x86: fix wrong section of pat_disable & make it static x86: Fix section mismatches in mpparse x86: fix set_fixmap to use phys_addr_t x86: Document get_user_pages_fast() x86, intr-remap: fix eoi for interrupt remapping without x2apic
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: return proper error code when writing filter file tracing/filters: allow user input integer to be oct or hex tracing/filters: fix NULL pointer dereference tracing/filters: NIL-terminate user input filter ftrace: Output REC->var instead of __entry->var for trace format Make __stringify support variable argument macros too tracing: fix document references tracing: fix splice return too large tracing: update file->f_pos when splice(2) it tracing: allocate page when needed tracing: disable seeking for trace_pipe_raw
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: continue lock debugging despite some taints lockdep: warn about lockdep disabling after kernel taint
-
Andrew Morton authored
Atttempting to rid us of the problematic work_on_cpu(). Just use smp_call_fuction_single() here. This repairs a 10% sysbench(oltp)+mysql regression which Mike reported, due to commit 6b44003e Author: Andrew Morton <akpm@linux-foundation.org> Date: Thu Apr 9 09:50:37 2009 -0600 work_on_cpu(): rewrite it to create a kernel thread on demand It seems that the kernel calls these acpi-cpufreq functions at a quite high frequency. Valdis Kletnieks also reports that this causes 70-90 forks per second on his hardware. Cc: Valdis.Kletnieks@vt.edu Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Acked-by:
Dave Jones <davej@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by:
Mike Galbraith <efault@gmx.de> Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> [ Made it use smp_call_function_many() instead of looping over cpu's with smp_call_function_single() - Linus ] Signed-off-by:
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Let new-style drivers implement attach_adapter i2c: Fix sparse warnings for I2C_BOARD_INFO() i2c-voodoo3: Deprecate in favor of tdfxfb i2c-algo-pca: Fix use of uninitialized variable in debug message
-
