- 25 Jul, 2008 40 commits
-
-
Oleg Nesterov authored
Introduce the new PF_KTHREAD flag to mark the kernel threads. It is set by INIT_TASK() and copied to the forked childs (we could set it in kthreadd() along with PF_NOFREEZE instead). daemonize() was changed as well. In that case testing of PF_KTHREAD is racy, but daemonize() is hopeless anyway. This flag is cleared in do_execve(), before search_binary_handler(). Probably not the best place, we can do this in exec_mmap() or in start_thread(), or clear it along with PF_FORKNOEXEC. But I think this doesn't matter in practice, and if do_execve() fails kthread should die soon. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
1. SIGKILL can't be blocked, remove this check from sigkill_pending(). 2. When ptrace_stop() sees sigkill_pending() == T, it can just return. Kill "int killed" and simplify the code. This also is more correct, the tracer shouldn't see us in TASK_TRACED if we are not going to stop. I strongly believe this code needs further changes. We should do the "was this task killed" check unconditionally, currently it depends on arch_ptrace_stop_needed(). On the other hand, sigkill_pending() isn't very clever. If the task was killed tkill(SIGKILL), the signal can be already dequeued if the caller is do_exit(). Signed-off-by:
-
Oleg Nesterov authored
ptrace_stop() has some complicated checks to prevent the scheduling in the TASK_TRACED state with the pending SIGKILL, but these checks are racy, and they depend on arch_ptrace_stop_needed(). This patch assumes that the traced task should die asap if it was killed by SIGKILL, in that case schedule()->signal_pending_state() has no reason to ignore the TASK_WAKEKILL part of TASK_TRACED, and we can kill this nasty special case. Note: do_exit()->ptrace_notify() is special, the killed task can already dequeue SIGKILL at this point. Another indication that fatal_signal_pending() is not exactly right. Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups for the asm/ptrace.h userspace headers: - include/asm-generic/Kbuild.asm already lists ptrace.h, remove the superfluous listings in the Kbuild files of the following architectures: - cris - frv - powerpc - x86 - don't expose function prototypes and macros to userspace: - arm - blackfin - cris - mn10300 - parisc - remove #ifdef CONFIG_'s around #define's: - blackfin - m68knommu - sh: AFAIK __SH5__ should work in both kernel and userspace, no need to leak CONFIG_SUPERH64 to userspace - xtensa: cosmetical change to remove empty #ifndef __ASSEMBLY__ #else #endif from the userspace headers Not changed by this patch is the fact that the following architectures have a different struct pt_regs depending on CONFIG_ variables: - h8300 - m68knommu - mips This does not work in userspace. Signed-off-by:Adrian Bunk <bunk@kernel.org> Cc: <linux-arch@vger.kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Greg Ungerer <gerg@uclinux.org> Acked-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Grant Grundler <grundler@parisc-linux.org> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Acked-by:
Chris Zankel <chris@zankel.net> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Gustavo Fernando Padovan authored
Change the type of pid and tgid variables from int to the POSIX type pid_t. Signed-off-by:
Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Michael Kerrisk authored
In the switch to configurable HZ in 2.6, the treatment of the si_utime and si_stime fields that are exposed to userland via the siginfo structure looks to have been botched. As things stand, these fields report times in units of HZ, so that userland gets information that varies depending on the HZ that the kernel was configured with. This patch changes the reported values to use USER_HZ units. Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Acked-by:
-
Oleg Nesterov authored
No changes in fs/exec.o The for_each_process() loop in zap_threads() is very subtle, it is not clear why we don't race with fork/exit/exec. Add the fat comment. Also, change the code to use while_each_thread(). Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
fae5fa44 changed do_signal_stop() to check SIGNAL_UNKILLABLE, this wasn't needed. If signal_group_exit() == F, the signal sent to SIGNAL_UNKILLABLE task must be already filtered out by the caller, get_signal_to_deliver(). And if signal_group_exit() == T we are not going to stop. Signed-off-by:
-
Oleg Nesterov authored
dequeue_signal() checks SIGNAL_GROUP_EXIT before setting SIGNAL_STOP_DEQUEUED. This was added by 788e05a6 a long ago to avoid the coredump/SIGSTOP race. Since then the related code was changed, and now this subtle check is both incomplete and unneeded at the same time. It is incomplete because nowadays exec() doesn't set SIGNAL_GROUP_EXIT, so in fact we should check signal_group_exit() to avoid a similar race. Fortunately, we doesn't need the check at all. The only function which relies on SIGNAL_STOP_DEQUEUED is do_signal_stop(), and it ignores this flag if signal_group_exit() == T, this covers the SIGNAL_GROUP_EXIT case. Signed-off-by:
-
Oleg Nesterov authored
There is no reason for rcu_read_lock() in __exit_signal(). tsk->sighand can only be changed if tsk does exec, obviously this is not possible. Signed-off-by:
-
Oleg Nesterov authored
With the recent changes collect_signal() always returns true. Change it to return void and update the single caller. Signed-off-by:
-
Oleg Nesterov authored
Factor out sigdelset() calls and remove the "still_pending" variable. Signed-off-by:
-
Oleg Nesterov authored
collect_signal() checks sigismember(&list->signal, sig), this is not needed. This "sig" was just found by next_signal(), so it must be valid. We have a (completely broken) call to ->notifier in between, but it must not play with sigpending->signal bits or unlock ->siglock. Signed-off-by:
-
Oleg Nesterov authored
release_posix_timer() can't be called with ->it_process != NULL. Once sys_timer_create() sets ->it_process it must not call release_posix_timer(), otherwise we can race with another thread doing sys_timer_delete(), this timer is visible to idr_find() and unlocked. The same is true for two other callers (actually, for any possible caller), sys_timer_delete() and itimer_delete(). They must clear ->it_process before unlock_timer() + release_posix_timer(). Signed-off-by:
-
Oleg Nesterov authored
sys_timer_delete() and itimer_delete() check "timer->it_process != NULL", this looks completely bogus. ->it_process == NULL means that this timer is already under destruction or it is not fully initialized, this must not happen. sys_timer_delete: the timer is locked, and lock_timer() can't succeed if ->it_process == NULL. itimer_delete: it is called by exit_itimers() when there are no other threads which can play with signal_struct->posix_timers. Signed-off-by:
-
Lai Jiangshan authored
In cpuset_update_task_memory_state() local variable struct task_struct *tsk = current; And local variable tsk is used 14 times and statement task_cs(tsk) is used twice in this function. So using task_cs(tsk) instead of task_cs(current) is better for readability. And "(struct cgroup_scanner *)&scan" is not good for readability also. (and "container_of" is used in cpuset_do_move_task(), not "(cpuset_hotplug_scanner *)scan") Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by:
-
Lai Jiangshan authored
cgroup(cgroup_scan_tasks) will initialize heap->gt for us. This patch removes started_after() and its helper-function. Signed-off-by:
-
Lai Jiangshan authored
I create lots of empty cpusets(empty cpumasks) and turn off the "sched_load_balance" in top cpuset. I found that all these empty cpumasks are passed to partition_sched_domains() in rebuild_sched_domains(), it's very time-consuming for partition_sched_domains() and it's not need. It also reduce memory consumed and some works in rebuild_sched_domains() too. Signed-off-by:
-
Li Zefan authored
When changing 'sched_relax_domain_level', don't rebuild sched domains if 'cpus' is empty or 'sched_load_balance' is not set. Also make the comments of rebuild_sched_domains() more readable. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Miao Xie authored
The bug is that a task may run on the cpu/node which is not in its cpuset.cpus/ cpuset.mems. It can be reproduced by the following commands: ----------------------------------- # mkdir /dev/cpuset # mount -t cpuset xxx /dev/cpuset # mkdir /dev/cpuset/0 # echo 0-1 > /dev/cpuset/0/cpus # echo 0 > /dev/cpuset/0/mems # echo $$ > /dev/cpuset/0/tasks # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 1 > /sys/devices/system/cpu/cpu1/online ----------------------------------- There is only CPU0 in cpuset.cpus, but the task in this cpuset runs on both CPU0 and CPU1. It is because the task's cpu_allowed didn't get updated after we did CPU offline/online manipulation. Similar for mem_allowed. This patch fixes this bug expect for root cpuset. Because there is a problem about root cpuset, in that whether it is necessary to update all the tasks in root cpuset or not after cpu/node offline/online. If updating, some kernel threads which is bound into a specified cpu will be unbound. If not updating, there is a bug in root cpuset. This bug is also caused by offline/online manipulation. For example, there is a dual-cpu machine. we create a sub cpuset in root cpuset and assign 1 to its cpus. And then we attach some tasks into this sub cpuset. After this, we offline CPU1. Now, the tasks in this new cpuset are moved into root cpuset automatically because there is no cpu in sub cpuset. Then we online CPU1, we find all the tasks which doesn't belong to root cpuset originally just run on CPU0. Maybe we need to add a flag in the task_struct to mark which task can't be unbound? Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Acked-by:
Paul Jackson <pj@sgi.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Miao Xie authored
Extract two functions from update_cpumask() and update_nodemask().They will be used later for updating tasks' cpus_allowed and mems_allowed after CPU/NODE offline/online. [lizf@cn.fujitsu.com: build fix] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Shrinking memory usage at limit change. [akpm@linux-foundation.org: coding-style fixes] Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Add an interface to set limit. This is necessary to memory resource controller because it shrinks usage at set limit. Other controllers may not need this interface to shrink usage because shrinking is not necessary or impossible. Acked-by:
-
Li Zefan authored
Those checks are unnecessary, because when the subsystem is disabled it can't be mounted, so those functions won't get called. The check is needed in functions which will be called in other places except cgroup. [hugh@veritas.com: further checking of disabled flag] Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Because of remove refcnt patch, it's very rare case to that mem_cgroup_charge_common() is called against a page which is accounted. mem_cgroup_charge_common() is called when. 1. a page is added into file cache. 2. an anon page is _newly_ mapped. A racy case is that a newly-swapped-in anonymous page is referred from prural threads in do_swap_page() at the same time. (a page is not Locked when mem_cgroup_charge() is called from do_swap_page.) Another case is shmem. It charges its page before calling add_to_page_cache(). Then, mem_cgroup_charge_cache() is called twice. This case is handled in mem_cgroup_cache_charge(). But this check may be too hacky... Signed-off-by : KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Showing brach direction for obvious conditions. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
A new call, mem_cgroup_shrink_usage() is added for shmem handling and relacing non-standard usage of mem_cgroup_charge/uncharge. Now, shmem calls mem_cgroup_charge() just for reclaim some pages from mem_cgroup. In general, shmem is used by some process group and not for global resource (like file caches). So, it's reasonable to reclaim pages from mem_cgroup where shmem is mainly used. [hugh@veritas.com: shmem_getpage release page sooner] [hugh@veritas.com: mem_cgroup_shrink_usage css_put] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: -
KAMEZAWA Hiroyuki authored
This patch changes page migration under memory controller to use a different algorithm. (thanks to Christoph for new idea.) Before: - page_cgroup is migrated from an old page to a new page. After: - a new page is accounted , no reuse of page_cgroup. Pros: - We can avoid compliated lock depndencies and races in migration. Cons: - new param to mem_cgroup_charge_common(). - mem_cgroup_getref() is added for handling ref_cnt ping-pong. This version simplifies complicated lock dependency in page migraiton under memory resource controller. new refcnt sequence is following. a mapped page: prepage_migration() ..... +1 to NEW page try_to_unmap() ..... all refs to OLD page is gone. move_pages() ..... +1 to NEW page if page cache. remap... ..... all refs from *map* is added to NEW one. end_migration() ..... -1 to New page. page's mapcount + (page_is_cache) refs are added to NEW one. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
* remove over-killing initialization (in fast path) * makeing the condition for PAGE_CGROUP_FLAG_ACTIVE be more obvious. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
mem_cgroup_subsys and page_cgroup_cache should be read_mostly and MEM_CGROUP_RECLAIM_RETRIES can be just a fixed number. Signed-off-by:
-
Li Zefan authored
- clean up set_majmin() - use simple_strtoul() to parse major/minor [akpm@linux-foundation.org: fix simple_strtoul() usage] [kosaki.motohiro@jp.fujitsu.com: fix warnings] Signed-off-by:
Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
Currently this list is protected with a simple spinlock, even for reading from one. This is OK, but can be better. Actually I want it to be better very much, since after replacing the OpenVZ device permissions engine with the cgroup-based one I noticed, that we set 12 default device permissions for each newly created container (for /dev/null, full, terminals, ect devices), and people sometimes have up to 20 perms more, so traversing the ~30-40 elements list under a spinlock doesn't seem very good. Here's the RCU protection for white-list - dev_whitelist_item-s are added and removed under the devcg->lock, but are looked up in permissions checking under the rcu_read_lock. Signed-off-by:
-
Serge E. Hallyn authored
cgroup_clone creates a new cgroup with the pid of the task. This works correctly for unshare, but for clone cgroup_clone is called from copy_namespaces inside copy_process, which happens before the new pid is created. As a result, the new cgroup was created with current's pid. This patch: 1. Moves the call inside copy_process to after the new pid is created 2. Passes the struct pid into ns_cgroup_clone (as it is not yet attached to the task) 3. Passes a name from ns_cgroup_clone() into cgroup_clone() so as to keep cgroup_clone() itself simpler 4. Uses pid_vnr() to get the process id value, so that the pid used to name the new cgroup is always the pid as it would be known to the task which did the cloning or unsharing. I think that is the most intuitive thing to do. This way, task t1 does clone(CLONE_NEWPID) to get t2, which does clone(CLONE_NEWPID) to get t3, then the cgroup for t3 will be named for the pid by which t2 knows t3. (Thanks to Dan Smith for finding the main bug) Changelog: June 11: Incorporate Paul Menage's feedback: don't pass NULL to ns_cgroup_clone from unshare, and reduce patch size by using 'nodename' in cgroup_clone. June 10: Original version [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Serge Hallyn <serge@us.ibm.com> Acked-by:
Dan Smith <danms@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Paul Menage authored
Currently res_counter_write() is a raw file handler even though it's ultimately taking a number, since in some cases it wants to pre-process the string when converting it to a number. This patch converts res_counter_write() from a raw file handler to a write_string() handler; this allows some of the boilerplate copying/locking/checking to be removed, and simplies the cleanup path, since these functions are now performed by the cgroups framework. [lizf@cn.fujitsu.com: build fix] Signed-off-by:
-
Paul Menage authored
This patch converts devcgroup_access_write() from a raw file handler into a handler for the cgroup write_string() method. This allows some boilerplate copying/locking/checking to be removed and simplifies the cleanup path, since these functions are performed by the cgroups framework before calling the handler. Signed-off-by:
-
Paul Menage authored
This patch tweaks the signatures of the update_cpumask() and update_nodemask() functions so that they can be called directly as handlers for the new cgroups write_string() method. This allows cpuset_common_file_write() to be removed. Signed-off-by:
-
Paul Menage authored
This patch changes attach_task_by_pid() to take a u64 rather than a string; as a result it can be called directly as a control groups write_u64 handler, and cgroup_common_file_write() can be removed. Signed-off-by:
-
Paul Menage authored
This patch moves the write handler for the cgroups notify_on_release file into a separate handler. This handler requires no cgroups locking since it relies on atomic bitops for synchronization. Signed-off-by:
-
Paul Menage authored
This patch contains cleanups suggested by reviewers for the recent write_string() patchset: - pair cgroup_lock_live_group() with cgroup_unlock() in cgroup.c for clarity, rather than directly unlocking cgroup_mutex. - make the return type of cgroup_lock_live_group() a bool - use a #define'd constant for the local buffer size in read/write functions Signed-off-by:
-
