These can be useful when debugging possible issues around USB4NET
control packet exchange.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there, rename the module to thunderbolt_net (with underscore) to
match with the thunderbolt_dma_test convention.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are no more users of the obsolete interface
u64_stats_fetch_begin_irq() and u64_stats_fetch_retry_irq().

Remove the obsolete API.

[bigeasy: Split out the bits from a larger patch].
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20230110160738.974085-1-bigeasy@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/usb/r8152.c
  be53771c ("r8152: add vendor/device ID pair for Microsoft Devkit")
  ec51fbd1 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from rxrpc.

  The rxrpc changes are noticeable large: to address a recent regression
  has been necessary completing the threaded refactor.

  Current release - regressions:

   - rxrpc:
       - only disconnect calls in the I/O thread
       - move client call connection to the I/O thread
       - fix incoming call setup race

   - eth: mlx5:
       - restore pkt rate policing support
       - fix memory leak on updating vport counters

  Previous releases - regressions:

   - gro: take care of DODGY packets

   - ipv6: deduct extension header length in rawv6_push_pending_frames

   - tipc: fix unexpected link reset due to discovery messages

  Previous releases - always broken:

   - sched: disallow noqueue for qdisc classes

   - eth: ice: fix potential memory leak in ice_gnss_tty_write()

   - eth: ixgbe: fix pci device refcount leak

   - eth: mlx5:
       - fix command stats access after free
       - fix macsec possible null dereference when updating MAC security
         entity (SecY)"

* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  r8152: add vendor/device ID pair for Microsoft Devkit
  net: stmmac: add aux timestamps fifo clearance wait
  bnxt: make sure we return pages to the pool
  net: hns3: fix wrong use of rss size during VF rss config
  ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
  net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
  net: sched: disallow noqueue for qdisc classes
  iavf/iavf_main: actually log ->src mask when talking about it
  igc: Fix PPS delta between two synchronized end-points
  ixgbe: fix pci device refcount leak
  octeontx2-pf: Fix resource leakage in VF driver unbind
  selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
  selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
  selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
  net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
  net/mlx5e: Fix macsec ssci attribute handling in offload path
  net/mlx5: E-switch, Coverity: overlapping copy
  net/mlx5e: Don't support encap rules with gbp option
  net/mlx5: Fix ptp max frequency adjustment range
  net/mlx5e: Fix memory leak on updating vport counters
  ...

Pull s390 fixes from Heiko Carstens:

 - Add various missing READ_ONCE() to cmpxchg() loops prevent the
   compiler from potentially generating incorrect code. This includes a
   rather large change to the s390 specific hardware sampling code and
   its current use of cmpxchg_double().

   Do the fix now to get it out of the way of Peter Zijlstra's
   cmpxchg128() work, and have something that can be backported. The
   added new code includes a private 128 bit cmpxchg variant which will
   be removed again after Peter's rework is available. Also note that
   this 128 bit cmpxchg variant is used to implement 128 bit
   READ_ONCE(), while strictly speaking it wouldn't be necessary, and
   _READ_ONCE() should also be sufficient; even though it isn't obvious
   for all converted locations that this is the case. Therefore use this
   implementation for for the sake of clarity and consistency for now.

 - Fix ipl report address handling to avoid kdump failures/hangs.

 - Fix misuse of #(el)if in kernel decompressor.

 - Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36,
   caused by the recently changed discard behaviour.

 - Make sure _edata and _end symbols are always page aligned.

 - The current header guard DEBUG_H in one of the s390 specific header
   files is too generic and conflicts with the ath9k wireless driver.
   Add an _ASM_S390_ prefix to the guard to make it unique.

 - Update defconfigs.

* tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
  s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
  s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
  s390/kexec: fix ipl report address for kdump
  s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
  s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
  s390: expicitly align _edata and _end symbols on page boundary
  s390/debug: add _ASM_S390_ prefix to header guard

Pull xen fixes from Juergen Gross:

 - two cleanup patches

 - a fix of a memory leak in the Xen pvfront driver

 - a fix of a locking issue in the Xen hypervisor console driver

* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvcalls: free active map buffer on pvcalls_front_free_map
  hvc/xen: lock console list traversal
  x86/xen: Remove the unused function p2m_index()
  xen: make remove callback of xen driver void returned

Pull timer doc fixes from Ingo Molnar:

 - Fix various DocBook formatting errors in kernel/time/ that generated
   (justified) warnings during a kernel-doc build.

* tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix various kernel-doc problems

Pull perf events hw enablement from Ingo Molnar:

 - More hardware-enablement for Intel Meteor Lake & Emerald Rapid
   systems: pure model ID enumeration additions that do not affect other
   systems.

* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add Emerald Rapids
  perf/x86/msr: Add Emerald Rapids
  perf/x86/msr: Add Meteor Lake support
  perf/x86/cstate: Add Meteor Lake support

Pull scheduler fixes from Ingo Molnar:

 - Fix scheduler frequency invariance bug related to overly long
   tickless periods triggering an integer overflow and disabling the
   feature.

 - Fix use-after-free bug in dup_user_cpus_ptr().

 - Fix do_set_cpus_allowed() deadlock scenarios related to calling
   kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
   solution here - we looked at patches to free the structure after the
   pi_lock got dropped, but that looked quite a bit messier - and none
   of this is truly performance critical. We can revisit this if it's
   too lazy of a solution ...

* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Use kfree_rcu() in do_set_cpus_allowed()
  sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
  sched/core: Fix arch_scale_freq_tick() on tickless systems

Pull objtool fix from Ingo Molnar:

 - Fix objtool to be more permissive with hand-written assembly that
   uses non-function symbols in executable sections.

* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Tolerate STT_NOTYPE symbols at end of section

Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull nolibc fixes from Paul McKenney:

 - The fd_set structure was incorrectly defined as arrays of u32 instead
   of long, which breaks BE64. Fix courtesy of Sven Schnelle.

 - S_ISxxx macros were incorrectly testing the bits after applying them
   instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.

 - The mips code was randomly broken due to an unprotected "noreorder"
   directive in the _start code that could prevent the assembler from
   filling delayed slots. This in turn resulted in random other
   instructions being placed into those slots. Fix courtesy of Willy
   Tarreau.

 - The current nolibc header layout refrains from including files that
   are not explicitly included by the code using nolibc. Unfortunately,
   this causes build failures when such files contain definitions that
   are used (for example) by libgcc. Example definitions include raise()
   and memset(), which are called by some architectures, but only at
   certain optimization levels. Fix courtesy of Willy Tarreau.

 - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
   inside the memset() definition. The compiler replaced this
   construction with a call to... memset(). Userland cannot be forced to
   build with -ffreestanding, so an empty asm() statement was introduced
   into the loop the loop in order to prevent the compiler from making
   this unproductive transformation. Fix courtesy of Willy Tarreau.

 - Most of the O_* macros were wrong on RISCV because their octal values
   were coded as hexadecimal. This resulted in the getdents64() selftest
   failing. Fix courtesy of Willy Tarreau.

This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.

* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
  tools/nolibc: prevent gcc from making memset() loop over itself
  tools/nolibc: fix missing includes causing build issues at -O0
  tools/nolibc: restore mips branch ordering in the _start block
  tools/nolibc: Fix S_ISxxx macros
  nolibc: fix fd_set type

The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.

Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull spi fixes from Mark Brown:

 - Fixes for long standing issues with accesses to spidev->spi during
   teardown in the spidev userspace driver.

 - Rename the newly added spi-cs-setup-ns DT property to be more in line
   with our other delay properties before it becomes ABI.

 - A few driver specific fixes.

* tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: remove debug messages that access spidev->spi without locking
  spi: spidev: fix a race condition when accessing spidev->spi
  spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
  spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns
  spi: cadence: Fix busy cycles calculation
  spi: mediatek: Enable irq before the spi registration

Merge tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small driver specific fixes, one of which I queued for 6.1
  but didn't actually send out so has had *plenty* of testing in -next"

* tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo
  regulator: da9211: Use irq handler when ready

Pull MTD fixes from Miquel Raynal:

 - cfi: Allow building spi-intel standalone to avoid build issues

 - parsers: scpart: Fix __udivdi3 undefined on mips

 - parsers: tplink_safeloader: Fix potential memory leak during parsing

 - Update email of Tudor Ambarus

* tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  MAINTAINERS: Update email of Tudor Ambarus
  mtd: cfi: allow building spi-intel standalone
  mtd: parsers: scpart: fix __udivdi3 undefined on mips
  mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()

Arseniy Krasnov says:

====================
vsock: update tools and error handling

Patchset consists of two parts:

1) Kernel patch
One patch from Bobby Eshleman. I took single patch from Bobby:
https://lore.kernel.org/lkml/d81818b868216c774613dd03641fcfe63cc55a45
.1660362668.git.bobby.eshleman@bytedance.com/ and use only part for
af_vsock.c, as VMCI and Hyper-V parts were rejected.

I used it, because for SOCK_SEQPACKET big messages handling was broken -
ENOMEM was returned instead of EMSGSIZE. And anyway, current logic which
always replaces any error code returned by transport to ENOMEM looks
strange for me also(for example in EMSGSIZE case it was changed to
ENOMEM).

2) Tool patches
Since there is work on several significant updates for vsock(virtio/
vsock especially): skbuff, DGRAM, zerocopy rx/tx, so I think that this
patchset will be useful.

This patchset updates vsock tests and tools a little bit. First of all
it updates test suite: two new tests are added. One test is reworked
message bound test. Now it is more complex. Instead of sending 1 byte
messages with one MSG_EOR bit, it sends messages of random length(one
half of messages are smaller than page size, second half are bigger)
with random number of MSG_EOR bits set. Receiver also don't know total
number of messages. Message bounds control is maintained by hash sum
of messages length calculation. Second test is for SOCK_SEQPACKET - it
tries to send message with length more than allowed. I think both tests
will be useful for DGRAM support also.

Third thing that this patchset adds is small utility to test vsock
performance for both rx and tx. I think this util could be useful as
'iperf'/'uperf', because:
1) It is small comparing to 'iperf' or 'uperf', so it very easy to add
   new mode or feature to it(especially vsock specific).
2) It allows to set SO_RCVLOWAT and SO_VM_SOCKETS_BUFFER_SIZE option.
   Whole throughtput depends on both parameters.
3) It is located in the kernel source tree, so it could be updated by
   the same patchset which changes related kernel functionality in vsock.

I used this util very often to check performance of my rx zerocopy
support(this tool has rx zerocopy support, but not in this patchset).

Here is comparison of outputs from three utils: 'iperf', 'uperf' and
'vsock_perf'. In all three cases sender was at guest side. rx and
tx buffers were always 64Kb(because by default 'uperf' uses 8K).

iperf:

   [ ID] Interval           Transfer     Bitrate
   [  5]   0.00-10.00  sec  12.8 GBytes  11.0 Gbits/sec sender
   [  5]   0.00-10.00  sec  12.8 GBytes  11.0 Gbits/sec receiver

uperf:

   Total     16.27GB /  11.36(s) =    12.30Gb/s       23455op/s

vsock_perf:

   tx performance: 12.301529 Gbits/s
   rx performance: 12.288011 Gbits/s

Results are almost same in all three cases.

Patchset was rebased and tested on skbuff v9 patch from Bobby Eshleman:
https://lore.kernel.org/netdev/20230107002937.899605-1-bobby.eshleman@bytedance.com/

====================

Link: https://lore.kernel.org/r/67cd2d0a-1c58-baac-7b39-b8d4ea44f719@sberdevices.ruSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This adds utility to check vsock rx/tx performance.

Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This adds test for sending message, bigger than peer's buffer size.
For SOCK_SEQPACKET socket it must fail, as this type of socket has
message size limit.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This updates message bound test making it more complex. Instead of
sending 1 bytes messages with one MSG_EOR bit, it sends messages of
random length(one half of messages are smaller than page size, second
half are bigger) with random number of MSG_EOR bits set. Receiver
also don't know total number of messages.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This removes behaviour, where error code returned from any transport
was always switched to ENOMEM. For example when user tries to send too
big message via SEQPACKET socket, transport layers return EMSGSIZE, but
this error code was always replaced with ENOMEM and returned to user.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull SCSI fixes from James Bottomley:
 "Ten small fixes (less the one that cleaned up a reverted removal),
  nine in drivers of which the ufs one is the most critical.

  The single core patch is a minor speedup to error handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort()
  scsi: hisi_sas: Fix tag freeing for reserved tags
  scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery
  scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0()
  scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile
  scsi: core: scsi_error: Do not queue pointless abort workqueue functions
  scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
  scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
  scsi: mpi3mr: Remove usage of dma_get_required_mask() API
  scsi: mpt3sas: Remove usage of dma_get_required_mask() API

Queue spinlock is currently held in mtk_wed_wo_queue_rx_clean and
mtk_wed_wo_queue_refill routines for MTK Wireless Ethernet Dispatcher
MCU rx queue. mtk_wed_wo_queue_refill() is running during initialization
and in rx tasklet while mtk_wed_wo_queue_rx_clean() is running in
mtk_wed_wo_hw_deinit() during hw de-init phase after rx tasklet has been
disabled. Since mtk_wed_wo_queue_rx_clean and mtk_wed_wo_queue_refill
routines can't run concurrently get rid of spinlock for mcu rx queue.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/36ec3b729542ea60898471d890796f745479ba32.1673342990.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.

Fixes: f4da5652 ("net: stmmac: Add support for external trigger timestamping")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf)

This series contains updates to ixgbe, igc, and iavf drivers.

Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking
on ixgbe.

Christopher adds setting of Toggle on Target Time bits for proper
pulse per second (PPS) synchronization for igc.

Daniil Tatianin fixes, likely, copy/paste issue that misreported
destination instead of source for IP mask for iavf error.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf/iavf_main: actually log ->src mask when talking about it
  igc: Fix PPS delta between two synchronized end-points
  ixgbe: fix pci device refcount leak
====================

Link: https://lore.kernel.org/r/20230110223825.648544-1-anthony.l.nguyen@intel.comReviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The reference needs to keep the instance memory around, but also
the instance lock must remain valid. Users will take the lock,
check registration status and release the lock. mutex_destroy()
etc. belong in the same place as the freeing of the memory.

Unfortunately lockdep_unregister_key() sleeps so we need
to switch the an rcu_work.

Note that the problem is a bit hard to repro, because
devlink_pernet_pre_exit() iterates over registered instances.
AFAIU the instances must get devlink_free()d concurrently with
the namespace getting deleted for the problem to occur.

Reported-by: syzbot+d94d214ea473e218fc89@syzkaller.appspotmail.com
Reported-by: syzbot+9f0dd863b87113935acf@syzkaller.appspotmail.com
Fixes: 9053637e ("devlink: remove the registration guarantee of references")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230111042908.988199-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).

After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.

Same commit added the same bug in the new bnxt_rx_multi_page_skb().

Fixes: 1dc4c557 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, it used old rss size to get current tc mode. As a result, the
rss size is updated, but the tc mode is still configured based on the old
rss size.

So this patch fixes it by using the new rss size in both process.

Fixes: 93969dc1 ("net: hns3: refactor VF rss init APIs with new common rss init APIs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are still single reports of systems where ASPM incompatibilities
cause tx timeouts. It's not clear whom to blame, so let's disable
ASPM in case of a tx timeout.

v2:
- add one-time warning for informing the user
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/92369a92-dc32-4529-0509-11459ba0e391@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Make 'perf kmem' cope with the removal of some
   kmem:kmem_cache_alloc_node and kmem:kmalloc_node in the
   11e9734b ("mm/slab_common: unify NUMA and UMA version of
   tracepoints") commit, making sure it works with Linux >= 6.2 as well
   as with older kernels where those tracepoints are present.

 - Also make it handle the new "node" kmem:kmalloc and
   kmem:kmem_cache_alloc tracepoint field introduced in that same
   commit.

 - Fix hardware tracing PMU address filter duplicate symbol selection,
   that was preventing to match with static functions with the same name
   present in different object files.

 - Fix regression on what linux/types.h file gets used to build the "BPF
   prologue" 'perf test' entry, the system one lacks the fmode_t
   definition used in this test, so provide that type in the test
   itself.

 - Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1. If the
   user asks for linking with the libbpf package provided by the distro,
   then it has to be >= 0.8.0. Using the libbpf supplied with the kernel
   would be a fallback in that case.

 - Fix the build when libbpf isn't available or explicitly disabled via
   NO_LIBBPF=1.

 - Don't try to install libtraceevent plugins as its not anymore in the
   kernel sources and will thus always fail.

* tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf auxtrace: Fix address filter duplicate symbol selection
  perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1
  perf build: Fix build error when NO_LIBBPF=1
  perf tools: Don't install libtraceevent plugins as its not anymore in the kernel sources
  perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring
  perf kmem: Support legacy tracepoints
  perf build: Properly guard libbpf includes
  perf tests bpf prologue: Fix bpf-script-test-prologue test compile issue with clang

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Neil Armstrong says:

====================
dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings

Batch conversion of the following bindings:
[...]
- mdio-mux-meson-g12a.txt
====================

Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v2-0-36ad050bb625@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert MDIO bus multiplexer/glue of Amlogic G12a SoC family bindings
to dt-schema.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When a match has been made to the nth duplicate symbol, return
success not error.

Example:

  Before:

    $ cat file.c
    cat: file.c: No such file or directory
    $ cat file1.c
    #include <stdio.h>

    static void func(void)
    {
            printf("First func\n");
    }

    void other(void);

    int main()
    {
            func();
            other();
            return 0;
    }
    $ cat file2.c
    #include <stdio.h>

    static void func(void)
    {
            printf("Second func\n");
    }

    void other(void)
    {
            func();
    }

    $ gcc -Wall -Wextra -o test file1.c file2.c
    $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
    Multiple symbols with name 'func'
    #1      0x1149  l       func
                    which is near           main
    #2      0x1179  l       func
                    which is near           other
    Disambiguate symbol name by inserting #n after the name e.g. func #2
    Or select a global symbol by inserting #0 or #g or #G
    Failed to parse address filter: 'filter func @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.
    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    Failed to parse address filter: 'filter func #2 @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.

  After:

    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    First func
    Second func
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.016 MB perf.data ]
    $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
    1231062.526977619:   tr strt                               0 [unknown] =>     558495708179 func
    1231062.526977619:   tr end  call               558495708188 func =>     558495708050 _init
    1231062.526979286:   tr strt                               0 [unknown] =>     55849570818d func
    1231062.526979286:   tr end  return             55849570818f func =>     55849570819d other

Fixes: 1b36c03e ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use READ_ONCE() before cmpxchg() to prevent that the compiler generates
code that fetches the to be compared old value several times from memory.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.comSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.

Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.

For example:

        /* Reset trailer (using compare-double-and-swap) */
        do {
                te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
                te_flags |= SDB_TE_ALERT_REQ_MASK;
        } while (!cmpxchg_double(&te->flags, &te->overflow,
                 te->flags, te->overflow,
                 te_flags, 0ULL));

The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.

Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.

Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.

As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The newly added spi-cs-setup-ns doesn't really fit with the existing
property names for delays, rename it so that it does before it makes it
into a release and becomes ABI.

The two debug messages in spidev_open() dereference spidev->spi without
taking the lock and without checking if it's not null. This can lead to
a crash. Drop the messages as they're not needed - the user-space will
get informed about ENOMEM with the syscall return value.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>

There's a spinlock in place that is taken in file_operations callbacks
whenever we check if spidev->spi is still alive (not null). It's also
taken when spidev->spi is set to NULL in remove().

This however doesn't protect the code against driver unbind event while
one of the syscalls is still in progress. To that end we need a lock taken
continuously as long as we may still access spidev->spi. As both the file
ops and the remove callback are never called from interrupt context, we
can replace the spinlock with a mutex.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>