- 30 May, 2023 19 commits
-
-
Paolo Abeni authored
Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 1) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition, the current selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: in other words, one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftests or just some sub-tests before starting them. This first part focuses on marking the different selftests as skipped if MPTCP is not even supported. That's what is done in patches 2 to 8. Patch 2/8 introduces a new file (mptcp_lib.sh) to be able to re-use some helpers in the different selftests. The first MPTCP selftest has been introduced in v5.6. Patch 1/8 is a bit different but still linked: it modifies mptcp_join.sh selftest not to use 'cmp --bytes' which is not supported by the BusyBox implementation. It is apparently quite common to use BusyBox in CI environments. This tool is needed for a subtest introduced in v6.1. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230528-upstream-net-20230528-mptcp-selftests-support-old-kernels-part-1-v1-0-a32d85577fc6@tessares.netSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 1a418cb8 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685 ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Note that this check can also mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env var is set to 1: by doing that, we can make sure a test is not being skipped by mistake. A new shared file is added here to be able to re-used the same check in the different selftests we have. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
BusyBox's 'cmp' command doesn't support the '--bytes' parameter. Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test failing [1] because their 'cmp' command doesn't support this '--bytes' option: cmp: unrecognized option '--bytes=1024' BusyBox v1.35.0 () multi-call binary. Usage: cmp [-ls] [-n NUM] FILE1 [FILE2] Instead, 'head --bytes' can be used as this option is supported by BusyBox. A temporary file is needed for this operation. Because it is apparently quite common to use BusyBox, it is certainly better to backport this fix to impacted kernels. Fixes: 6bf41020 ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1] Suggested-by:Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Haiyang Zhang authored
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the frequent and parallel code path of all queues. So, r/w into this single shared variable by many threads on different CPUs creates a lot caching and memory overhead, hence perf regression. And, it's not accurate due to the high volume concurrent r/w. For example, a workload is iperf with 128 threads, and with RPS enabled. We saw perf regression of 25% with the previous patch adding the counters. And this patch eliminates the regression. Since the error path of mana_poll_rx_cq() already has warnings, so keeping the counter and convert it to a per-queue variable is not necessary. So, just remove this counter from this high frequency code path. Also, remove the tx_cqes counter for the same reason. We have warnings & other counters for errors on that path, and don't need to count every normal cqe processing. Cc: stable@vger.kernel.org Fixes: bd7fc6e1 ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Paolo Abeni authored
Wen Gu says: ==================== Two fixes for SMCRv2 This patch set includes two bugfix for SMCRv2. ==================== Link: https://lore.kernel.org/r/1685101741-74826-1-git-send-email-guwen@linux.alibaba.comSigned-off-by:
-
Wen Gu authored
We encountered a crash when using SMCRv2. It is caused by a logical error in smc_llc_fill_ext_v2(). BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #44 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc] RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250 FS: 0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_send_add_link+0x1ae/0x2f0 [smc] smc_llc_srv_add_link+0x2c9/0x5a0 [smc] ? cc_mkenc+0x40/0x60 smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into SMCRv2 LLC ADD LINK messages. However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes the logic. Fixes: b4ba4652 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
When finding the first RMB of link group, it should start from the current RMB list whose index is 0. So fix it. Fixes: b4ba4652 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by:
-
David Howells authored
UTS_RELEASE has a maximum length of 64 which can cause rxrpc_version to exceed the 65 byte message limit. Per the rx spec[1]: "If a server receives a packet with a type value of 13, and the client-initiated flag set, it should respond with a 65-byte payload containing a string that identifies the version of AFS software it is running." The current implementation causes a compile error when WERROR is turned on and/or UTS_RELEASE exceeds the length of 49 (making the version string more than 64 characters). Fix this by generating the string during module initialisation and limiting the UTS_RELEASE segment of the string does not exceed 49 chars. We need to make sure that the 64 bytes includes "linux-" at the front and " AF_RXRPC" at the back as this may be used in pattern matching. Fixes: 44ba0698 ("RxRPC: Handle VERSION Rx protocol packets") Reported-by:
Kenny Ho <Kenny.Ho@amd.com> Link: https://lore.kernel.org/r/20230523223944.691076-1-Kenny.Ho@amd.com/Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com> Link: https://lore.kernel.org/r/654974.1685100894@warthog.procyon.org.ukSigned-off-by:
-
Cambda Zhu authored
This patch replaces the tp->mss_cache check in getting TCP_MAXSEG with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if it's zero is probably a bug. With this change, getting TCP_MAXSEG before connecting will return default MSS normally, and return user_mss if user_mss is set. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Jack Yang <mingliang@linux.alibaba.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#tSigned-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a5 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
-
Eric Dumazet authored
A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt() This is better handled by reading pkt_sk(sk)->num later in packet_do_bind() while appropriate lock is held. READ_ONCE() in writers are often an evidence of something being wrong. Fixes: 822b5a1c ("af_packet: Fix data-races of pkt_sk(sk)->num.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230526154342.2533026-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
ethtool has some attrs which dump multiple scalars into an attribute. The spec currently expects one attr per entry. Fixes: a353318e ("tools: ynl: populate most of the ethtool spec") Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230526220653.65538-1-kuba@kernel.orgSigned-off-by:
-
Sebastian Krzyszkowiak authored
BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.smSigned-off-by:
-
- 26 May, 2023 9 commits
-
-
Osama Muhammad authored
This patch fixes the error checking in nfcsim.c. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Raju Rangoju authored
In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register. Fix this by propagating the mode switch status information to xgbe_phy_status(). Fixes: e57f7a3f ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by:
Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by:
-
Jakub Kicinski authored
Most protos' poll() methods insert a memory barrier between writes to sk_err and sk_error_report(). This dates back to commit a4d25803 ("tcp: Fix race in tcp_poll"). I guess we should do the same thing in TLS, tcp_poll() does not hold the socket lock. Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-05-24 This series includes bug fixes for the mlx5 driver. * tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: Documentation: net/mlx5: Wrap notes in admonition blocks Documentation: net/mlx5: Add blank line separator before numbered lists Documentation: net/mlx5: Use bullet and definition lists for vnic counters description Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks net/mlx5: Fix check for allocation failure in comp_irqs_request_pci() net/mlx5: DR, Add missing mutex init/destroy in pattern manager net/mlx5e: Move Ethernet driver debugfs to profile init callback net/mlx5e: Don't attach netdev profile while handling internal error net/mlx5: Fix post parse infra to only parse every action once net/mlx5e: Use query_special_contexts cmd only once per mdev net/mlx5: fw_tracer, Fix event handling net/mlx5: SF, Drain health before removing device net/mlx5: Drain health before unregistering devlink net/mlx5e: Do not update SBCM when prio2buffer command is invalid net/mlx5e: Consider internal buffers size in port buffer calculations net/mlx5e: Prevent encap offload when neigh update is running net/mlx5e: Extract remaining tunnel encap code to dedicated file ==================== Link: https://lore.kernel.org/r/20230525034847.99268-1-saeed@kernel.orgSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller found a data race of pkt_sk(sk)->num. The value is changed under lock_sock() and po->bind_lock, so we need READ_ONCE() to access pkt_sk(sk)->num without these locks in packet_bind_spkt(), packet_bind(), and sk_diag_fill(). Note that WRITE_ONCE() is already added by commit c7d2ef5d ("net/packet: annotate accesses to po->bind"). BUG: KCSAN: data-race in packet_bind / packet_do_bind write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0: packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236 packet_bind+0x99/0xe0 net/packet/af_packet.c:3321 __sys_bind+0x19b/0x1e0 net/socket.c:1803 __do_sys_bind net/socket.c:1814 [inline] __se_sys_bind net/socket.c:1812 [inline] __x64_sys_bind+0x40/0x50 net/socket.c:1812 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1: packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322 __sys_bind+0x19b/0x1e0 net/socket.c:1803 __do_sys_bind net/socket.c:1814 [inline] __se_sys_bind net/socket.c:1812 [inline] __x64_sys_bind+0x40/0x50 net/socket.c:1812 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x0300 -> 0x0000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 96ec6327 ("packet: Diag core and basic socket info dumping") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
-
Jakub Kicinski authored
Python 3.9.0 or newer supports combining dicts() with |, but older versions of Python are still used in the wild (e.g. on CentOS 8, which goes EoL May 31, 2024). With Python 3.6.8 we get: TypeError: unsupported operand type(s) for |: 'dict' and 'dict' Use older syntax. Tested with non-legacy families only. Fixes: f036d936 ("tools: ynl: Add fixed-header support to ynl") Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Tested-by:
-
Eric Dumazet authored
Simon Kapadia reported the following issue: <quote> The Online Amateur Radio Community (OARC) has recently been experimenting with building a nationwide packet network in the UK. As part of our experimentation, we have been testing out packet on 300bps HF, and playing with net/rom. For HF packet at this baud rate you really need to make sure that your MTU is relatively low; AX.25 suggests a PACLEN of 60, and a net/rom PACLEN of 40 to go with that. However the Linux net/rom support didn't work with a low PACLEN; the mkiss module would truncate packets if you set the PACLEN below about 200 or so, e.g.: Apr 19 14:00:51 radio kernel: [12985.747310] mkiss: ax1: truncating oversized transmit packet! This didn't make any sense to me (if the packets are smaller why would they be truncated?) so I started investigating. I looked at the packets using ethereal, and found that many were just huge compared to what I would expect. A simple net/rom connection request packet had the request and then a bunch of what appeared to be random data following it: </quote> Simon provided a patch that I slightly revised: Not only we must not use skb_tailroom(), we also do not want to count NR_NETWORK_LEN twice. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Co-Developed-by:
Simon Kapadia <szymon@kapadia.pl> Signed-off-by:
-
Wei Fang authored
We encountered a kernel call trace issue which was related to ndo_xdp_xmit callback on our i.MX8MP platform. The reproduce steps show as follows. 1. The FEC port (eth0) connects to a PC port, and the PC uses pktgen_sample03_burst_single_flow.sh to generate packets and send these packets to the FEC port. Notice that the script must be executed before step 2. 2. Run the "./xdp_redirect eth0 eth1" command on i.MX8MP, the eth1 interface is the dwmac. Then there will be a call trace issue soon. Please see the log for more details. The root cause is that the NETDEV_XDP_ACT_NDO_XMIT feature is enabled by default, so when the step 2 command is exexcuted and packets have already been sent to eth0, the stmmac_xdp_xmit() starts running before the stmmac_xdp_set_prog() finishes. To resolve this issue, we disable the NETDEV_XDP_ACT_NDO_XMIT feature by default and turn on/off this feature when the bpf program is installed/uninstalled which just like the other ethernet drivers. Call Trace log: [ 306.311271] ------------[ cut here ]------------ [ 306.315910] WARNING: CPU: 0 PID: 15 at lib/timerqueue.c:55 timerqueue_del+0x68/0x70 [ 306.323590] Modules linked in: [ 306.326654] CPU: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 6.4.0-rc1+ #37 [ 306.333277] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 306.338591] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 306.345561] pc : timerqueue_del+0x68/0x70 [ 306.349577] lr : __remove_hrtimer+0x5c/0xa0 [ 306.353777] sp : ffff80000b7c3920 [ 306.357094] x29: ffff80000b7c3920 x28: 0000000000000000 x27: 0000000000000001 [ 306.364244] x26: ffff80000a763a40 x25: ffff0000d0285a00 x24: 0000000000000001 [ 306.371390] x23: 0000000000000001 x22: ffff000179389a40 x21: 0000000000000000 [ 306.378537] x20: ffff000179389aa0 x19: ffff0000d2951308 x18: 0000000000001000 [ 306.385686] x17: f1d3000000000000 x16: 00000000c39c1000 x15: 55e99bbe00001a00 [ 306.392835] x14: 09000900120aa8c0 x13: e49af1d300000000 x12: 000000000000c39c [ 306.399987] x11: 100055e99bbe0000 x10: ffff8000090b1048 x9 : ffff8000081603fc [ 306.407133] x8 : 000000000000003c x7 : 000000000000003c x6 : 0000000000000001 [ 306.414284] x5 : ffff0000d2950980 x4 : 0000000000000000 x3 : 0000000000000000 [ 306.421432] x2 : 0000000000000001 x1 : ffff0000d2951308 x0 : ffff0000d2951308 [ 306.428585] Call trace: [ 306.431035] timerqueue_del+0x68/0x70 [ 306.434706] __remove_hrtimer+0x5c/0xa0 [ 306.438549] hrtimer_start_range_ns+0x2bc/0x370 [ 306.443089] stmmac_xdp_xmit+0x174/0x1b0 [ 306.447021] bq_xmit_all+0x194/0x4b0 [ 306.450612] __dev_flush+0x4c/0x98 [ 306.454024] xdp_do_flush+0x18/0x38 [ 306.457522] fec_enet_rx_napi+0x6c8/0xc68 [ 306.461539] __napi_poll+0x40/0x220 [ 306.465038] net_rx_action+0xf8/0x240 [ 306.468707] __do_softirq+0x128/0x3a8 [ 306.472378] run_ksoftirqd+0x40/0x58 [ 306.475961] smpboot_thread_fn+0x1c4/0x288 [ 306.480068] kthread+0x124/0x138 [ 306.483305] ret_from_fork+0x10/0x20 [ 306.486889] ---[ end trace 0000000000000000 ]--- Fixes: 66c0e13a ("drivers: net: turn on XDP features") Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
-
Thomas Bogendoerfer authored
Do skb_put() after a new skb has been successfully allocated otherwise the reused skb leads to skb_panics or incorrect packet sizes. Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by:
-
- 25 May, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and bpf. Current release - regressions: - net: fix skb leak in __skb_tstamp_tx() - eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs Current release - new code bugs: - handshake: - fix sock->file allocation - fix handshake_dup() ref counting - bluetooth: - fix potential double free caused by hci_conn_unlink - fix UAF in hci_conn_hash_flush Previous releases - regressions: - core: fix stack overflow when LRO is disabled for virtual interfaces - tls: fix strparser rx issues - bpf: - fix many sockmap/TCP related issues - fix a memory leak in the LRU and LRU_PERCPU hash maps - init the offload table earlier - eth: mlx5e: - do as little as possible in napi poll when budget is 0 - fix using eswitch mapping in nic mode - fix deadlock in tc route query code Previous releases - always broken: - udplite: fix NULL pointer dereference in __sk_mem_raise_allocated() - raw: fix output xfrm lookup wrt protocol - smc: reset connection when trying to use SMCRv2 fails - phy: mscc: enable VSC8501/2 RGMII RX clock - eth: octeontx2-pf: fix TSOv6 offload - eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize" * tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). net: phy: mscc: enable VSC8501/2 RGMII RX clock net: phy: mscc: remove unnecessary phydev locking net: phy: mscc: add support for VSC8501 net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE net/handshake: Enable the SNI extension to work properly net/handshake: Unpin sock->file if a handshake is cancelled net/handshake: handshake_genl_notify() shouldn't ignore @flags net/handshake: Fix uninitialized local variable net/handshake: Fix handshake_dup() ref counting net/handshake: Remove unneeded check from handshake_dup() ipv6: Fix out-of-bounds access in ipv6_find_tlv() net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs docs: netdev: document the existence of the mail bot net: fix skb leak in __skb_tstamp_tx() r8169: Use a raw_spinlock_t for the register locks. page_pool: fix inconsistency for page_pool_ring_[un]lock() bpf, sockmap: Test progs verifier error with latest clang bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: - Fix power_supply_get_battery_info for devices without parent devices resulting in NULL pointer dereference - Fix desktop systems reporting to run on battery once a power-supply device with device scope appears (e.g. a HID keyboard with a battery) - Ratelimit debug print about driver not providing data - Fix race condition related to external_power_changed in multiple drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx) - Fix LED trigger switching from blinking to solid-on when charging finishes - Fix multiple races in bq27xxx battery driver - mt6360: handle potential ENOMEM from devm_work_autocancel - sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit - rt9467: avoid passing 0 to dev_err_probe * tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits) power: supply: Fix logic checking if system is running from battery power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe power: supply: sbs-charger: Fix INHIBITED bit for Status reg power: supply: rt9467: Fix passing zero to 'dev_err_probe' power: supply: Ratelimit no data debug output power: supply: Fix power_supply_get_battery_info() if parent is NULL power: supply: bq24190: Call power_supply_changed() after updating input current power: supply: bq25890: Call power_supply_changed() after updating input current or voltage power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes power: supply: bq27xxx: Move bq27xxx_battery_update() down power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status() power: supply: bq27xxx: Fix poll_interval handling and races on remove power: supply: bq27xxx: Fix I2C IRQ race on remove power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition power: supply: leds: Fix blink to LED on transition power: supply: sc27xx: Fix external_power_changed race power: supply: bq25890: Fix external_power_changed race power: supply: axp288_fuel_gauge: Fix external_power_changed race ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes: - HD-audio runtime PM bug fix - A couple of HD-audio quirks - Fix series of ASoC Intel AVS drivers - ASoC DPCM fix for a bug found on new Intel systems - A few other ASoC device-specific small fixes" * tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable headset onLenovo M70/M90 ASoC: dwc: move DMA init to snd_soc_dai_driver probe() ASoC: cs35l41: Fix default regmap values for some registers ALSA: hda: Fix unhandled register update during auto-suspend period ASoC: dt-bindings: tlv320aic32x4: Fix supply names ASoC: Intel: avs: Add missing checks on FE startup ASoC: Intel: avs: Fix avs_path_module::instance_id size ASoC: Intel: avs: Account for UID of ACPI device ASoC: Intel: avs: Fix declaration of enum avs_channel_config ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg ASoC: Intel: avs: Access path components under lock ASoC: Intel: avs: Fix module lookup ALSA: hda/ca0132: add quirk for EVGA X299 DARK ASoC: soc-pcm: test if a BE can be prepared ASoC: rt5682: Disable jack detection interrupt during suspend ASoC: lpass: Fix for KASAN use_after_free out of bounds
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Nothing special to report just a few small fixes" * tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain platform/x86: ISST: Remove 8 socket limit platform/mellanox: mlxbf-pmc: fix sscanf() error checking platform/x86/amd/pmf: Fix CnQF and auto-mode after resume platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fix from Geert Uytterhoeven: - Fix signal frame issue causing user-space crashes on 68020/68030 * tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Move signal frame following exception on 68020/030
-
Kuniyuki Iwashima authored
syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbadd ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48bSigned-off-by:
-
Jakub Kicinski authored
David Epping says: ==================== net: phy: mscc: support VSC8501 this updated series of patches adds support for the VSC8501 Ethernet PHY and fixes support for the VSC8502 PHY in cases where no other software (like U-Boot) has initialized the PHY after power up. The first patch simply adds the VSC8502 to the MODULE_DEVICE_TABLE, where I guess it was unintentionally missing. I have no hardware to test my change. The second patch adds the VSC8501 PHY with exactly the same driver implementation as the existing VSC8502. The (new) third patch removes phydev locking from vsc85xx_rgmii_set_skews(), as discussed for v2 of the patch set. The (now) fourth patch fixes the initialization for VSC8501 and VSC8502. I have tested this patch with VSC8501 on hardware in RGMII mode only. https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8501-03_Datasheet_60001741A.PDF https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8502-03_Datasheet_60001742B.pdf Table 4-42 "RGMII CONTROL, ADDRESS 20E2 (0X14)" Bit 11 for each of them. By default the RX_CLK is disabled for these PHYs. In cases where no other software, like U-Boot, enabled the clock, this results in no received packets being handed to the MAC. The patch enables this clock output. According to Microchip support (case number 01268776) this applies to all modes (RGMII, GMII, and MII). Other PHYs sharing the same register map and code, like VSC8530/31/40/41 have the clock enabled and the relevant bit 11 is reserved and read-only for them. As per previous discussion the patch still clears the bit on these PHYs, too, possibly more easily supporting other future PHYs implementing this functionality. For the VSC8572 family of PHYs, having a different register map, no such changes are applied. ==================== Link: https://lore.kernel.org/r/20230523153108.18548-1-david.epping@missinglinkelectronics.comSigned-off-by:
-
David Epping authored
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled. For other PHYs supported by this driver the clock output is enabled by default. Fixes: d3169863 ("net: phy: mscc: add support for VSC8502") Signed-off-by:
David Epping <david.epping@missinglinkelectronics.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
David Epping authored
Holding the struct phy_device (phydev) lock is unnecessary when accessing phydev->interface in the PHY driver .config_init method, which is the only place that vsc85xx_rgmii_set_skews() is called from. The phy_modify_paged() function implements required MDIO bus level locking, which can not be achieved by a phydev lock. Signed-off-by:
-
David Epping authored
The VSC8501 PHY can use the same driver implementation as the VSC8502. Adding the PHY ID and copying the handler functions of VSC8502 is sufficient to operate it. Signed-off-by:
-
David Epping authored
The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by:
-
Jakub Kicinski authored
Chuck Lever says: ==================== Bug fixes for net/handshake Paolo observed that there is a possible leak of sock->file. I haven't looked into that yet, but it seems to be separate from the fixes in this series, so no need to hold these up. ==================== The submissions mentions net-next but it means netdev (perhaps merge window left over when trees are converged). In any case, it should have gone into net, but was instead applied to net-next as commit deb2e484 ("Merge branch 'net-handshake-fixes'"). These are fixes tho, and Chuck needs them to make progress with the client so double-merging them into net... it is what it is :( Link: https://lore.kernel.org/r/168381978252.84244.1933636428135211300.stgit@91.116.238.104.host.secureserver.netSigned-off-by:
-
