Unless we delete the timer that wakes up the write thread
before we stop the thread we risk re-starting the thread, so
delete the timer first.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When pblk receives a sync, all data up to that point in the write buffer
must be comitted to persistent storage, and as flash memory comes with a
minimal write size there is a significant cost involved both in terms
of time for completing the sync and in terms of write amplification
padded sectors for filling up to the minimal write size.

In order to get a better understanding of the costs involved for syncs,
Add a sysfs attribute to pblk: padded_dist, showing a normalized
distribution of sectors padded. In order to facilitate measurements of
specific workloads during the lifetime of the pblk instance, the
distribution can be reset by writing 0 to the attribute.

Do this by introducing counters for each possible padding:
{0..(minimal write size - 1)} and calculate the normalized distribution
when showing the attribute.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Rearranged total_buckets statement in pblk_sysfs_get_padding_dist
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Only one id group from the 1.2 specification is supported. Make
sure that only the first group is accessible.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The known implementations of the 1.2 specification, and upcoming 2.0
implementation all expose a sequential list of pages to write.
Remove the data structure, as it is no longer needed.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In a SSD, write amplification, WA, is defined as the average
number of page writes per user page write. Write amplification
negatively affects write performance and decreases the lifetime
of the disk, so it's a useful metric to add to sysfs.

In plkb's case, the number of writes per user sector is the sum of:

    (1) number of user writes
    (2) number of sectors written by the garbage collector
    (3) number of sectors padded (i.e. due to syncs)

This patch adds persistent counters for 1-3 and two sysfs attributes
to export these along with WA calculated with five decimals:

    write_amp_mileage: the accumulated write amplification stats
                      for the lifetime of the pblk instance

    write_amp_trip: resetable stats to facilitate delta measurements,
                    values reset at creation and if 0 is written
                    to the attribute.

64-bit counters are used as a 32 bit counter would wrap around
already after about 17 TB worth of user data. It will take a
long long time before the 64 bit sector counters wrap around.

The counters are stored after the bad block bitmap in the first
emeta sector of each written line. There is plenty of space in the
first emeta sector, so we don't need to bump the major version of
the line data format.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As a preparation for future bumps of data line persistent storage
versions, we need to start checking the emeta line version during
recovery. Also slit up the current emeta/smeta version into two
bytes (major,minor).

Recovering lines with the same major number as the current pblk data
line version must succeed. This means that any changes in the
persistent format must be:

 (1) Backward compatible: if we switch back to and older
     kernel, recovery of lines stored with major == current_major
     and minor > current_minor must succeed.

 (2) Forward compatible: switching to a newer kernel,
     recovery of lines stored with major=current_major and
     minor < minor must handle the data format differences
     gracefully(i.e. initialize new data structures to default values).

If we detect lines that have a different major number than
the current we must abort recovery. The user must manually
migrate the data in this case.

Previously the version stored in the emeta header was copied
from smeta, which has version 1, so we need to set the minor
version to 1.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Unless we check if there are bad sectors in the entire emeta-area
we risk ending up with valid bitmap / available sector count inconsistency.
This results in lines with a bad chunk at the last LUN marked as bad,
so go through the whole emeta area and mark up the invalid sectors.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The identity structure is initialized to zero in the beginning of
the nvme_nvm_identity function. The chnl_offset is separately set to
zero. Since both the variable and assignment is never changed, remove
them.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

lightnvm/pblk-gc: Delete an error message for a failed memory allocation in pblk_gc_line_prepare_ws()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The PCI interrupt vectors intended to be associated with a queue may
not start at 0; a driver may allocate pre_vectors for special use. This
patch adds an offset parameter so blk-mq may find the intended affinity
mask and updates all drivers using this API accordingly.

Cc: Don Brace <don.brace@microsemi.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: <linux-scsi@vger.kernel.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Even after the previous patch to drop lo_ctl_mutex while calling
vfs_getattr(), there are other cases where we can end up sleeping for a
long time while holding lo_ctl_mutex. Let's avoid the uninterruptible
sleep from the ioctls.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit
a34c0ae9 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If a storage device handled by BFQ happens to be slower than 7.5 KB/s
for a certain amount of time (in the order of a second), then the
estimated peak rate of the device, maintained in BFQ, becomes equal to
0. The reason is the limited precision with which the rate is
represented (details on the range of representable values in the
comments introduced by this commit). This leads to a division-by-zero
error where the estimated peak rate is used as divisor. Such a type of
failure has been reported in [1].

This commit addresses this issue by:
1. Lower-bounding the estimated peak rate to 1
2. Adding and improving comments on the range of rates representable

[1] https://www.spinics.net/lists/kernel/msg2739205.htmlSigned-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Enable the lightnvm integration to use the nvme_get_log_ext()
function.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Have a common table of mappings from numerical transport ids to names, and
zero the transport specific area in common code in nvmet_addr_trtype_store.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For consistancy reasons, any fabric-specific works
(e.g error recovery/reconnect) should be canceled in
nvme_stop_ctrl, as for all other NVMe pending works
(e.g. scan, keep alive).

The patch aims to simplify the logic of the code, as
we now only rely on a vague demand from any fabric
to flush its private workqueues at the beginning of
.delete_ctrl op.
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

While error recovery is ongoing, it is OK to move
ctrl to DELETING state (from concurrent delete_work).
Thus we don't need a warning for that case.
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If a task is holding a reference to a namespace on a removed controller,
the head will not be released. If the same controller is added again
later, its namespaces may not be successfully added. Instead, the user
will see kernel message "Duplicate IDs for nsid <X>".

This patch fixes that by skipping heads that don't have namespaces when
considering if a new namespace is safe to add.
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The .remove_one function is called for any ib_device removal.
In case the removed device has no reference in our driver, there
is no need to flush the work queue.
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The .remove_one function is called for any ib_device removal.
In case the removed device has no reference in our driver, there
is no need to flush the system work queue.
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We free nvmet rdma queues while handling rdma_cm events.
In order to avoid this we destroy the qp and the queue after destroying
the cm_id which guarantees that all rdma_cm events are done.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When a bio completion calls back into the transport for a
back-end io device, the request completion path can free
the transport io job structure allowing it to be reused for
other operations. The transport has a defer_rcv queue which
holds temporary cmd rcv ops while waitng for io job structures.
when the job frees, if there's a cmd waiting, it is picked up
and submitted for processing, which can call back out to the
bio path if it's a read.  Unfortunately, what is unknown is the
context of the original bio done call, and it may be in a state
(softirq) that is not compatible with submitting the new bio in
the same calling sequence. This is especially true when using
scsi back-end devices as scsi is in softirq when it makes the
done call.

Correct by scheduling the io to be started via workq rather
than calling the start new io path inline to the original bio
done path.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When reattaching to a removed remoteport that has not yet been
fully deleted as it's waiting for reconnect timeouts, be sure to
re-set the ports nport id and role.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Another abort race: An io request is started, becomes active,
and is attempted to be started with the lldd. At the same time
the controller is stopped/torndown and an itterator is run to
abort the ios. As the io is active, it is added to the outstanding
aborted io count.  However on the original io request thread, the
driver ends up rejecting the io due to the condition that induced
the controller teardown. The driver reject path didn't check whether
it was in the outstanding io count. This left the count outstanding
stopping controller teardown.

Correct by, in the driver reject case, setting the state to
inactive and checking whether it was in the outstanding io count.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The current nvme_fc code, when an io times out, will abort the io
on the fc link, then call the error recovery routine to reset the
controller. It is during the reset of the controller that the
transport will wait for all ios to be aborted before sending a
Disconnect LS to the target.

However, the reset routine only waits for the io which it generates
the abort for to complete. Any io that was aborted just prior to the
reset isn't in it's list to wait for. Thus the Disconnect is getting
sent before the aborts have completed.

Correct by removing the abort in the timeout handler. The reset will
generate the abort. At that point the timeout handler can be simplified
to request the reset (via the error handler) and restart the timeout
timer.

Also fixes a small typo in a comment in the reset handler.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If there are errors during initial controller create, the transport
will teardown the partially initialized controller struct and free
the ctlr memory.  Trouble is - most of those errors can occur due
to asynchronous events happening such io timeouts and subsystem
connectivity failures. Those failures invoke async workq items to
reset the controller and attempt reconnect.  Those may be in progress
as the main thread frees the ctrl memory, resulting in NULL ptr oops.

Prevent this from happening by having the main ctrl failure thread
changing state to DELETING followed by synchronously cancelling any
pending queued work item. The change of state will prevent the
scheduling of resets or reconnect events.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Yet another "incompatible" Samsung NVMe SSD 960 EVO and Asus motherboard
combination. 960 EVO device disappears from PCIe bus within few minutes
after boot-up when APST is in use and never gets back. Forcing
NVME_QUIRK_NO_APST is the only way to make this drive work with this
particular motherboard. NVME_QUIRK_NO_DEEPEST_PS doesn't work, upgrading
motherboard's BIOS didn't help either.
Since this is a desktop motherboard, the only drawback of not using APST
is increased device temperature.
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme_delete_ctrl can be called from various contexts in parallel,
and cause duplicated information prints, even though the specific
context doesn't perform the actual removal. Instead, print the
information when the actual removal occurs.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The nvme-fabrics exports the controller address to sysfs, and we'd
like to have parity with this feature for PCIe. This patch provides
the appropiate callback and returns the controller address as the pci
domain:bus:device.function.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

NVMe 1.2.1 extends the get log page interface to include 64 bit
offset and increases the number of dwords to 32 bits. Implement
for future use.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

namespaces_mutext is used to synchronize the operations on ctrl
namespaces list. Most of the time, it is a read operation.

On the other hand, there are many interfaces in nvme core that
need this lock, such as nvme_wait_freeze, and even more interfaces
will be added. If we use mutex here, circular dependency could be
introduced easily. For example:
context A                  context B
nvme_xxx                   nvme_xxx
hold namespaces_mutext     require namespaces_mutext
sync context B

So it is better to change it from mutex to rwsem.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme_remove_namespaces and nvme_remove_invalid_namespaces reference
the ctrl->namespaces list w/o holding namespaces_mutext. It is ok
to invoke nvme_ns_remove there, but what if there is others.

To be safer, reference the ctrl->namespaces list under
namespaces_mutext.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Quiesce IO queues prior to disabling device HMB accesses. A controller
using HMB may relay on it to efficiently complete IO commands.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add examples to show how to use nvme fault injection.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Signed-off-by: Karl Volz <karl.volz@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Linux's fault injection framework provides a systematic way to support
error injection via debugfs in the /sys/kernel/debug directory. This
patch uses the framework to add error injection to NVMe driver. The
fault injection source code is stored in a separate file and only linked
if CONFIG_FAULT_INJECTION_DEBUG_FS kernel config is selected.

Once the error injection is enabled, NVME_SC_INVALID_OPCODE with no
retry will be injected into the nvme_end_request. Users can change
the default status code and no retry flag via debufs. Following example
shows how to enable and inject an error. For more examples, refer to
Documentation/fault-injection/nvme-fault-injection.txt

How to enable nvme fault injection:

First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config,
recompile the kernel. After booting up the kernel, do the
following.

How to inject an error:

mount /dev/nvme0n1 /mnt
echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
cp a.file /mnt

Expected Result:

cp: cannot stat ‘/mnt/a.file’: Input/output error

Message from dmesg:

FAULT_INJECTION: forcing a failure.
name fault_inject, interval 1, probability 100, space 0, times 1
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
Hardware name: innotek GmbH VirtualBox/VirtualBox,
BIOS VirtualBox 12/01/2006
Call Trace:
  <IRQ>
  dump_stack+0x5c/0x7d
  should_fail+0x148/0x170
  nvme_should_fail+0x2f/0x50 [nvme_core]
  nvme_process_cq+0xe7/0x1d0 [nvme]
  nvme_irq+0x1e/0x40 [nvme]
  __handle_irq_event_percpu+0x3a/0x190
  handle_irq_event_percpu+0x30/0x70
  handle_irq_event+0x36/0x60
  handle_fasteoi_irq+0x78/0x120
  handle_irq+0xa7/0x130
  ? tick_irq_enter+0xa8/0xc0
  do_IRQ+0x43/0xc0
  common_interrupt+0xa2/0xa2
  </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480
R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x4/0x4
  default_idle+0x18/0xf0
  do_idle+0x150/0x1d0
  cpu_startup_entry+0x6f/0x80
  start_kernel+0x4c4/0x4e4
  ? set_init_arg+0x55/0x55
  secondary_startup_64+0xa5/0xb0
  print_req_error: I/O error, dev nvme0n1, sector 9240
EXT4-fs error (device nvme0n1): ext4_find_entry:1436:
inode #2: comm cp: reading directory lblock 0
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Signed-off-by: Karl Volz <karl.volz@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

NVME_IDENTIFY_DATA_SIZE was added to linux/nvme.h by following commit.
  commit 0add5e8e ("nvmet: use NVME_IDENTIFY_DATA_SIZE")

Make it use NVME_IDENTIFY_DATA_SIZE define instead of magic value
0x1000 in case of identify data size.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of open-coding it.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: target-devel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>