Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fsl', 'asoc/fix/fsl-esai', 'asoc/fix/intel', 'asoc/fix/mcasp' and 'asoc/fix/pxa' into asoc-linus

ASoC: Updates for v3.17

This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC.  A big thanks to Benoit and Misael for their work on
this.

Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.

 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
   link, contributed by Benoit Cousson based on work from Misael Lopez
   Cruz.
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah.
 - More componentisation work from Lars-Peter Clausen.
 - The remainder of the conversions of CODEC drivers to params_width()
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
   TAS2552.
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers.

# gpg: Signature made Mon 04 Aug 2014 17:13:21 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.16

A bigger batch of changes than I would like as I didn't send any for a
few weeks without noticing how many had built up.  They are almost all
driver specific though, larger changes are:

 - Fixes to the newly added Baytrail/MAX98090 which look like some QA
   was missed on the microphone detection.
 - Deletion of some erroniously listed audio formats for Haswell.
 - Fix debugfs creation in the core so that we don't try to generate
   multiple directories with the same name, relatively large textually
   but simple to inspect by eye and test.
 - A couple of bugfixes for the rcar driver one of which which involves
   a bit of code motion to move initailisation of some hardware out of
   common paths into device specific ones.
 - Ensure both channels are powered up for mono outputs on Arizona
   devices, involving some simple data tables listing the outputs and a
   loop over them.
 - A couple of fixes to save and restore information on suspended and
   idle Samsung I2S controllers.

# gpg: Signature made Tue 22 Jul 2014 00:52:53 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.16

Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.

# gpg: Signature made Thu 19 Jun 2014 11:57:31 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

This mode is unsupported, as the DMA controller can't do zero-padding
of samples.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

This reverts commit a603c8ee.

fsl_asoc_xlate_tdm_slot_mask() is different with snd_soc_xlate_tdm_slot_mask().
fsl_asoc_xlate_tdm_slot_mask() will set the enabled bit to 0, disabled bit
to 1. snd_soc_xlate_tdm_slot_mask() will set the enabled bit to 1, disabled
bit to 0.
For esai when the bit value is 1, the slot is enabled, when the bit value is 0,
the slot is disabled. If using fsl_asoc_xlate_tdm_slot_mask(), the esai will
work abnormally. So revert this patch, make the esai use default function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

The implicit BLCK divider setting was broken by "ASoC: mcasp: don't
override bclk divider if it was provided by the machine"-patch. After
the BCLK divider is implicitly set for the first time the
mcasp->bclk_div gets a non zero value and the implicit setting is
"turned off".
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

TDM slot length was set same as word length, regardless of the value
received in set_tdm_slot. This patch sets the TDM slot length correctly
as received in set_tdm_slot DAI callback
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

The source type should come before the direction specifier according to
ControlNames.txt.
Signed-off-by: Mark Brown <broonie@linaro.org>

If soc_dapm_read() fails, reg_val will be uninitialized, and bogus
values will be written later:

sound/soc/soc-dapm.c: In function 'snd_soc_dapm_get_enum_double':
sound/soc/soc-dapm.c:2862:15: warning: 'reg_val' may be used uninitialized in this function [-Wmaybe-uninitialized]
  unsigned int reg_val, val;
               ^

Return early on error to fix this.

Introduced by commit ce0fc93a ("ASoC:
Add DAPM support at the component level").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

There is no need to restore and restart PCM streams in case ADSP didn't
reach reset and power off state during system suspend/resume cycle. In that
case stream is still active but paused and firmware doesn't allow allocating
a new stream before paused stream is freed.

ADSP remains active in case suspend sequence didn't go to suspend_late
stage. This can happen when either suspend sequence is aborted by a wakeup
or by letting only devices suspend by "echo devices >/sys/power/pm_test".

Currently stream restoring fails in these suspend cases. Fix this by adding
a flag that indicates is complete stream reinitialization needed or is it
enough to resume paused stream. Flag is set when we know that ADSP reached
suspend_late.

Initial fix to this issue came from Fang Yang. I modified it a little and
forward ported it to top of two other suspend/resume patches from me.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Cc: yang fang <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Remove sst_byt_pcm_dev_resume() and move waiting of firmware boot into
sst_byt_pcm_dev_resume_early(). Now suspend_late and resume_early phases are
in sync with each other so that we know that ADSP was put into reset and was
unpowered after suspend_late and is ready to resume IO after resume_early
during resume stage in sst_byt_pcm_trigger().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge DSP reset and cleanup sequence in sst_byt_pcm_dev_suspend_noirq()
into sst_byt_pcm_dev_suspend_late(). First their order was wrong by first
unloading firmware modules in suspend_late and then taking DSP into reset
in suspend_noirq. Second ACPI has put device into OFF state already during
suspend_late so trying to reset the DSP is a no-op at suspend_noirq stage.

Fix these by moving DSP reset and cleanup into
sst_byt_pcm_dev_suspend_late() before firmware unloading.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

There's several new i.MX specific controllers, try to help make sure they
get reviewed by the people working on them.
Signed-off-by: Mark Brown <broonie@linaro.org>

Update the initial Baytrail ADSP firmware file name with the one that is now
in linux-firmware.git. Please see linux-firmware.git commit 7551a3a78453
("fw_sst_0f28: Add firmware for Intel Baytrail SST DSP").
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-next

Merge remote-tracking branches 'asoc/topic/tlv', 'asoc/topic/tlv320aic23', 'asoc/topic/tlv320aic31xx' and 'asoc/topic/tlv320aic32x4' into asoc-next

Merge remote-tracking branches 'asoc/topic/sigmadsp', 'asoc/topic/sirf', 'asoc/topic/spdif', 'asoc/topic/tas2552' and 'asoc/topic/tas5086' into asoc-next

Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/s6000', 'asoc/topic/samsung' and 'asoc/topic/sh-fsi' into asoc-next

Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rockchip', 'asoc/topic/rt286', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next

Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/oom' and 'asoc/topic/pxa' into asoc-next

Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', 'asoc/topic/max98090' and 'asoc/topic/mc13783' into asoc-next

Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-asrc', 'asoc/topic/fsl-spdif' and 'asoc/topic/imx-audmux' into asoc-next

Merge remote-tracking branches 'asoc/topic/cs4265', 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8', 'asoc/topic/cx20442' and 'asoc/topic/davinci' into asoc-next

Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/cirrus' and 'asoc/topic/cleanup' into asoc-next

Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/ak4642', 'asoc/topic/ak5386' and 'asoc/topic/arizona' into asoc-next

ASoC: Fixes for v3.16

A bigger batch of changes than I would like as I didn't send any for a
few weeks without noticing how many had built up.  They are almost all
driver specific though, larger changes are:

 - Fixes to the newly added Baytrail/MAX98090 which look like some QA
   was missed on the microphone detection.
 - Deletion of some erroniously listed audio formats for Haswell.
 - Fix debugfs creation in the core so that we don't try to generate
   multiple directories with the same name, relatively large textually
   but simple to inspect by eye and test.
 - A couple of bugfixes for the rcar driver one of which which involves
   a bit of code motion to move initailisation of some hardware out of
   common paths into device specific ones.
 - Ensure both channels are powered up for mono outputs on Arizona
   devices, involving some simple data tables listing the outputs and a
   loop over them.
 - A couple of fixes to save and restore information on suspended and
   idle Samsung I2S controllers.

# gpg: Signature made Tue 22 Jul 2014 00:52:53 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.16

Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.

# gpg: Signature made Thu 19 Jun 2014 11:57:31 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Since we pass the port number through file private data for debugfs we cast
it to and from a pointer so use uintptr_t in order to ensure that the
types are compatible, avoiding warnings on 64 bit platforms where pointers
are 64 bit and unsigned integers 32 bit.
Signed-off-by: Mark Brown <broonie@linaro.org>