- 31 Mar, 2010 1 commit
-
-
Andy Fleming authored
gianfar needed to ensure existence of the *skbuff arrays before freeing the skbs in them, rather than ensuring their nonexistence. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Mar, 2010 1 commit
-
-
Steven J. Magnani authored
tcp_read_sock() can have a eat skbs without immediately advancing copied_seq. This can cause a panic in tcp_collapse() if it is called as a result of the recv_actor dropping the socket lock. A userspace program that splices data from a socket to either another socket or to a file can trigger this bug. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Mar, 2010 3 commits
-
-
Neil Horman authored
Official patch to fix the r8169 frame length check error. Based on this initial thread: http://marc.info/?l=linux-netdev&m=126202972828626&w=1 This is the official patch to fix the frame length problems in the r8169 driver. As noted in the previous thread, while this patch incurs a performance hit on the driver, its possible to improve performance dynamically by updating the mtu and rx_copybreak values at runtime to return performance to what it was for those NICS which are unaffected by the ideosyncracy (if there are any). Summary: A while back Eric submitted a patch for r8169 in which the proper allocated frame size was written to RXMaxSize to prevent the NIC from dmaing too much data. This was done in commit fdd7b4c3. A long time prior to that however, Francois posted 126fa4b9, which expiclitly disabled the MaxSize setting due to the fact that the hardware behaved in odd ways when overlong frames were received on NIC's supported by this driver. This was mentioned in a security conference recently: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html It seems that if we can't enable frame size filtering, then, as Eric correctly noticed, we can find ourselves DMA-ing too much data to a buffer, causing corruption. As a result is seems that we are forced to allocate a frame which is ready to handle a maximally sized receive. This obviously has performance issues with it, so to mitigate that issue, this patch does two things: 1) Raises the copybreak value to the frame allocation size, which should force appropriately sized packets to get allocated on rx, rather than a full new 16k buffer. 2) This patch only disables frame filtering initially (i.e., during the NIC open), changing the MTU results in ring buffer allocation of a size in relation to the new mtu (along with a warning indicating that this is dangerous). Because of item (2), individuals who can't cope with the performance hit (or can otherwise filter frames to prevent the bug), or who have hardware they are sure is unaffected by this issue, can manually lower the copybreak and reset the mtu such that performance is restored easily. Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
This is ipv6 variant of the commit 5e016cbf.. ("ipv4: Don't drop redirected route cache entry unless PTMU actually expired") by Guenter Roeck <guenter.roeck@ericsson.com>. Remove cache route entry in ipv6_negative_advice() only if the timer is expired. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
As reported by Stephen Rothwell. drivers/net/tulip/uli526x.c: In function 'uli526x_rx_packet': drivers/net/tulip/uli526x.c:861: warning: assignment makes pointer from integer without a cast Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Mar, 2010 1 commit
-
-
Francois Romieu authored
This is quite similar to b39fe41f though said registers are not even documented as 64-bit registers - as opposed to the initial TxDescStartAddress ones - but as single bytes which must be combined into 32 bits at the MMIO read/write level before being merged into a 64 bit logical entity. Credits go to Ben Hutchings <ben@decadent.org.uk> for the MAR registers (aka "multicast is broken for ages on ARM) and to Timo Teräs <timo.teras@iki.fi> for the MAC registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Mar, 2010 16 commits
-
-
Ken Kawasaki authored
pcnet_cs: *add new id (Allied Telesis LM33-PCM-T Lan&Modem multifunction card) *use PROD_ID for LA-PCM.(because LA-PCM and LM33-PCM-T use the same MANF_ID). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
When cache is unresolved, c->mf[6]c_parent is set to 65535 and minvif, maxvif are not initialized, hence we must avoid to parse IIF and OIF. A second problem can happen when the user dumps a cache entry where a VIF, that was referenced at creation time, has been removed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Rose authored
When running the offline diagnostic tests check to see if any VFs are online. If so then only run the link test. This is necessary because the VFs running in guest VMs aren't aware of when the PF is taken offline for a diagnostic test. Also put a message to the system log telling the system administrator to take the VFs offline manually if (s)he wants to run a full diagnostic. Return 1 on each of the tests not run to alert the user of the condition. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
igb was previously checking the wrong bits in the MANC register to determine if managability was enabled. As a result it was incorrectly powering down and resetting the phy when it didn't need to. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
wzt wzt authored
Fix the following warnings: be_ethtool.c:493: warning: integer constant is too large for 'long' type be_ethtool.c:493: warning: integer constant is too large for 'long' type Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Acked-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brandon L Black authored
Add new flag MSG_WAITFORONE for the recvmmsg() syscall. When this flag is specified for a blocking socket, recvmmsg() will only block until at least 1 packet is available. The default behavior is to block until all vlen packets are available. This flag has no effect on non-blocking sockets or when used in combination with MSG_DONTWAIT. Signed-off-by: Brandon L Black <blblack@gmail.com> Acked-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Originally reported and patched by Franco Fichtner CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emil Tantilov authored
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with inserting the rt will happen in wrong chain. (Fixed Neil's comment about the index passed into the rt_intern_hash) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
There's no need in getting it 3 times and gcc isn't smart enough to understand this himself. This is just a cleanup before the fix (next patch). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
When a dump is interrupted at the last device in a hash chain and then continued, "idx" won't get incremented past s_idx, so s_ip_idx is not reset when moving on to the next device. This means of all following devices only the last n - s_ip_idx addresses are dumped. Tested-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Kyle McMartin authored
Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Menchaca authored
Fix undo of reserve() before RX recycle gfar_new_skb reserve()s space in the SKB to align it. If an error occurs, and the skb needs to be returned to the RX recycle queue, the current code attempts to reset head, but did not reset tail. This patch remembers the alignment amount, and reverses the reserve() when needed. Signed-off-by: Ben Menchaca <ben@bigfootnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Mar, 2010 13 commits
-
-
Chris Leech authored
During FCF solicitation, the switch is supposed to pad the solicited advertisement out to the endpoints specified maximum FCoE frame size. That means that we need to receive FIP frames that are larger than the standard MTU. To make sure the receive queue is configured correctly, we should be filtering FIP traffic into the FCoE queues. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Love authored
Currently FIP (FCoE Initialization Protocol) frames are going untagged. This causes various problems with FCFs (switches) that have negotiated a priority over dcbx. This patch tags FIP frames with the same priority as the FCoE frames. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Love authored
If the user buffer count was 256 the shift would place a 1 in the offset region leading to errors. It also overwrites the uers buffer list. This patch makes sure that at most 256 user buffers are allowed for DDP and the buffer count is masked properly such that it doesn't overwrite the offset when shifting the bits. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Frank Zhang <frank_1.zhang@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
In the last patch I missed an unecessary min_t comparison. This patch removes it, the path allocates at most 72 tx queues for 82599 and 24 for 82598 there is no need for this check. Additionally this sets MAX_[TX|RX]_QUEUES to 72. Which is used as the size for the tx/rx_ring arrays. There is no reason to have more tx_rings/rx_rings then num_tx_queues. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Rose authored
The clear_to_send flag is being cleared before the call to ping all the VFs. It should be called after pinging all the VFs. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Rose authored
VFs running in guest VMs do not respond in as timely a manner to PF indication it is going down as they do when running in the host domain. If the adapter is in SR-IOV mode insert a two second delay to guarantee that all VFs have had time to respond to the PF reset. In any case resetting the PF while VFs are active should be discouraged but if it must be done then there will be a two second delay to help synchronize resets among the PF and all the VFs. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Rose authored
In the Tx mapping function if a DMA error occurred then the unwind of previously mapped sections would improperly check an unsigned int if it was less than zero. Changed the index variable to signed to avoid the error. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Return value of ioremap is not checked, NULL check added. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> crb_intr_mask/crb_sts_consumer is predefined for NX2031 not for NX3031. For NX3031, these values get defined in rx context creation. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Bios sub version from unified fw image is calculated incorrect. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 35317688. People are reporting problems due to this change and there is no anticipation that the cause will be tracked down any time soon. We can try next time to selectively re-enable this based upon chip type, or have a black list of some sort. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Mar, 2010 5 commits
-
-
Jon Maloy authored
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x55e37): Section mismatch in reference from the function elsa_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function elsa_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because elsa_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56512): Section mismatch in reference from the function avma1cs_config() to the function .devinit.text:hisax_init_pcmcia() The function avma1cs_config() references the function __devinit hisax_init_pcmcia(). This is often because avma1cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56bfb): Section mismatch in reference from the function teles_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function teles_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because teles_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Henne authored
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x558d6): Section mismatch in reference from the function sedlbauer_config() to the function .devinit.text:hisax_init_pcmcia() The function sedlbauer_config() references the function __devinit hisax_init_pcmcia(). This is often because sedlbauer_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-