Thanks to devres, we can now afford to create more than one input node
without having to overload the remove/failure paths. Having one input
node per remote is something which should have been implemented from start
but the probability of having users with several remotes is quite low.
Anyway, still, better looking at the future and implement things properly.

Remote input nodes will be freed/unregistered magically as they are
created in the devres group &remote->remotes[index].

We need to open the hid node now that the remotes are dynamically
allocated.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

No functional changes, just a prep patch for the one after.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This will be useful when each remote will be assigned its own input device.
We won't need to unregister each input and sysfs and other elements one
at a time.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The wacom_remote_create_attr_group() and wacom_remote_destroy_attr_group()
functions were both allocating/destroying the sysfs groups but also
initializing the parameters for the remotes. Have proper functions
that can be called and extended.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Thanks to devres management, we don't need to remember a lot of failure
path. One or two is enough.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If we want to have one input device per remote, it's better to have our
own struct wacom_remote which is dynamically allocated.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

wacom_remote_status_irq() sends information of addition/removal of EKR.
We want to allocate one input node per remote, so better having this
in a separate worker, not handled in the IRQ directly.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We need to add an action to ensure wacom->led.groups is null when
wacom_led_control() gets called after the resources has been freed.

This also prevents to send a LED command when there is no support
from the device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

wacom_release_shared_data() and wacom_remove_shared_data() are moved up
so they can be referenced in wacom_add_shared_data().

There is no point in explicitly setting wacom_wac1->shared->type to 0 in
wacom_wireless_work() (plus this would give an oops).
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We started switching the driver to devres, so we should use it as much
as possible.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The sysfs group was indeed removed by kobject_put(wacom->remote_dir) in
wacom_remove(), but the name of the group was never freed.

Also remove the misplaced kobject_put(wacom->remote_dir) in the error
path of wacom_remote_create_attr_group().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Use our own wacom_devm_sysfs_create_group() as there is currently no
generic one. It has been requested at least twice [1][2] but has been
always rejected.
However, in the Wacom case, for the wirelessly connected devices, we need
to be able to release the created sysfs files without removing the parent
kobject.

[1] https://patchwork.kernel.org/patch/7526551/
[2] https://lkml.org/lkml/2013/3/14/728Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We currently have a complex clean_inputs() function while this can be
handled all by devres. Set a group that we can destroy in wireless_work().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Simplifying the error code paths.
We need to keep wacom_clean_inputs() around for now as the wireless
module is using it to dynamically remove the inputs on disconnect.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Simplifying the error code paths.
We need to keep wacom_destroy_battery() around for now as the wireless
module and the remotes are using it to dynamically remove the battery
supply on disconnect.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Looks like the battery hijacked the wireless worker. That's not fair so
use a work queue per task.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Like remotes, LEDs should be handled by themself, not magically behind
the inputs as they have a complete different life.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

wacom->remote_dir has nothing to do with inputs, so better not magically
removing it when cleaning inputs.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The type is never set but we check for it in wacom_wireless_irq().
It looks like this is a big hack from the beginning, so fill in the gap
only.

Untested.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since fd5f92b6 ("HID: wacom: reuse wacom_parse_and_register() in
wireless_work"), wacom->shared->type is not set.
Send the information of the battery if we have one.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - new hid-alps driver for ALPS Touchpad-Stick device, from Masaki Ota

 - much improved and generalized HID led handling, and merge of
   specialized hid-thingm driver into this generic hid-led one, from
   Heiner Kallweit

 - i2c-hid power management improvements from Fu Zhonghui and Guohua
   Zhong

 - uhid initialization race fix from Roderick Colenbrander

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  HID: add usb device id for Apple Magic Keyboard
  HID: hid-led: fix Delcom support on big endian systems
  HID: hid-led: add support for Greynut Luxafor
  HID: hid-led: add support for Delcom Visual Signal Indicator G2
  HID: hid-led: remove report id from struct hidled_config
  HID: alps: a few cleanups
  HID: remove ThingM blink(1) driver
  HID: hid-led: add support for ThingM blink(1)
  HID: hid-led: add support for reading from LED devices
  HID: hid-led: add support for devices with multiple independent LEDs
  HID: i2c-hid: set power sleep before shutdown
  HID: alps: match alps devices in core
  HID: thingm: simplify debug output code
  HID: alps: pass correct sizes to hid_hw_raw_request()
  HID: alps: struct u1_dev *priv is internal to the driver
  HID: add Alps I2C HID Touchpad-Stick support
  HID: led: fix config
  usb: misc: remove outdated USB LED driver
  HID: migrate USB LED driver from usb misc to hid
  HID: i2c_hid: enable i2c-hid devices to suspend/resume asynchronously
  ...

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  fat: fix error message for bogus number of directory entries
  fat: fix typo s/supeblock/superblock/
  ASoC: max9877: Remove unused function declaration
  dw2102: don't output spurious blank lines to the kernel log
  init: fix Kconfig text
  ARM: io: fix comment grammar
  ocfs: fix ocfs2_xattr_user_get() argument name
  scsi/qla2xxx: Remove erroneous unused macro qla82xx_get_temp_val1()

Pull quota update from Jan Kara:
 "time64 support for quota"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: use time64_t internally

Pull random driver fix from Ted Ts'o:
 "Fix a boot failure on systems with non-contiguous NUMA id's"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: use for_each_online_node() to iterate over NUMA nodes

Pull vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  Probably the most interesting part long-term is ->d_init() - that will
  have a bunch of followups in (at least) ceph and lustre, but we'll
  need to sort the barrier-related rules before it can get used for
  really non-trivial stuff.

  Another fun thing is the merge of ->d_iput() callers (dentry_iput()
  and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
  except the one in __d_lookup_lru())"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  fs/dcache.c: avoid soft-lockup in dput()
  vfs: new d_init method
  vfs: Update lookup_dcache() comment
  bdev: get rid of ->bd_inodes
  Remove last traces of ->sync_page
  new helper: d_same_name()
  dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
  vfs: clean up documentation
  vfs: document ->d_real()
  vfs: merge .d_select_inode() into .d_real()
  unify dentry_iput() and dentry_unlink_inode()
  binfmt_misc: ->s_root is not going anywhere
  drop redundant ->owner initializations
  ufs: get rid of redundant checks
  orangefs: constify inode_operations
  missed comment updates from ->direct_IO() prototype change
  file_inode(f)->i_mapping is f->f_mapping
  trim fsnotify hooks a bit
  9p: new helper - v9fs_parent_fid()
  debugfs: ->d_parent is never NULL or negative
  ...

This changes the vfs dentry hashing to mix in the parent pointer at the
_beginning_ of the hash, rather than at the end.

That actually improves both the hash and the code generation, because we
can move more of the computation to the "static" part of the dcache
setup, and do less at lookup runtime.

It turns out that a lot of other hash users also really wanted to mix in
a base pointer as a 'salt' for the hash, and so the slightly extended
interface ends up working well for other cases too.

Users that want a string hash that is purely about the string pass in a
'salt' pointer of NULL.

* merge branch 'salted-string-hash':
  fs/dcache.c: Save one 32-bit multiply in dcache lookup
  vfs: make the string hashes salt the hash

Conflicts:
	drivers/hid/hid-thingm.c

Merge branches 'for-4.8/alps', 'for-4.8/apple', 'for-4.8/i2c-hid', 'for-4.8/uhid-offload-hid-device-add' and 'for-4.8/upstream' into for-linus

This fixes a crash on s390 with fake NUMA enabled.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly userspace programs")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Some of our "for_each_xyz()" macro constructs make gcc unhappy about
lack of braces around if-statements inside or outside the loop, because
the loop construct itself has a "if-then-else" statement inside of it.

The resulting warnings look something like this:

  drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’:
  drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
     if (ctx != dev_priv->kernel_context)
        ^

even if the code itself is fine.

Since the warning is fairly easy to avoid by adding a braces around the
if-statement near the for_each_xyz() construct, do so, rather than
disabling the otherwise potentially useful warning.

(The if-then-else statements used in the "for_each_xyz()" constructs are
designed to be inherently safe even with no braces, but in this case
it's quite understandable that gcc isn't really able to tell that).

This finally leaves the standard "allmodconfig" build with just a
handful of remaining warnings, so new and valid warnings hopefully will
stand out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Newer versions of gcc warn about the use of __builtin_return_address()
with a non-zero argument when "-Wall" is specified:

  kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’:
  kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address]
     stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
  [ .. repeats a few times for other similar cases .. ]

It is true that a non-zero argument is somewhat dangerous, and we do not
actually have very many uses of that in the kernel - but the ftrace code
does use it, and as Stephen Rostedt says:

 "We are well aware of the danger of using __builtin_return_address() of
  > 0.  In fact that's part of the reason for having the "thunk" code in
  x86 (See arch/x86/entry/thunk_{64,32}.S).  [..] it adds extra frames
  when tracking irqs off sections, to prevent __builtin_return_address()
  from accessing bad areas.  In fact the thunk_32.S states: 'Trampoline to
  trace irqs off.  (otherwise CALLER_ADDR1 might crash)'."

For now, __builtin_return_address() with a non-zero argument is the best
we can do, and the warning is not helpful and can end up making people
miss other warnings for real problems.

So disable the frame-address warning on compilers that need it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull HSI updates from Sebastian Reichel:

 - proper runtime pm support for omap-ssi and ssi-protocol

 - misc fixes

* tag 'hsi-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: (24 commits)
  HSI: omap_ssi: drop pm_runtime_irq_safe
  HSI: omap_ssi_port: use rpm autosuspend API
  HSI: omap_ssi: call msg->complete() from process context
  HSI: omap_ssi_port: ensure clocks are kept enabled during transfer
  HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant
  HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock
  HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio
  HSI: omap_ssi_port: switch to threaded pio irq
  HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet
  HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync
  HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls
  HSI: core: switch port event notifier from atomic to blocking
  HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations
  HSI: omap_ssi: convert cawake irq handler to thread
  HSI: ssi_protocol: fix ssip_xmit invocation
  HSI: ssi_protocol: replace spin_lock with spin_lock_bh
  HSI: ssi_protocol: avoid ssi_waketest call with held spinlock
  HSI: omap_ssi: do not reset module
  HSI: omap_ssi_port: remove useless newline
  hsi: Only descend into hsi directory when CONFIG_HSI is set
  ...

Pull random driver updates from Ted Ts'o:
 "A number of improvements for the /dev/random driver; the most
  important is the use of a ChaCha20-based CRNG for /dev/urandom, which
  is faster, more efficient, and easier to make scalable for
  silly/abusive userspace programs that want to read from /dev/urandom
  in a tight loop on NUMA systems.

  This set of patches also improves entropy gathering on VM's running on
  Microsoft Azure, and will take advantage of a hw random number
  generator (if present) to initialize the /dev/urandom pool"

(It turns out that the random tree hadn't been in linux-next this time
around, because it had been dropped earlier as being too quiet.  Oh
well).

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: strengthen input validation for RNDADDTOENTCNT
  random: add backtracking protection to the CRNG
  random: make /dev/urandom scalable for silly userspace programs
  random: replace non-blocking pool with a Chacha20-based CRNG
  random: properly align get_random_int_hash
  random: add interrupt callback to VMBus IRQ handler
  random: print a warning for the first ten uninitialized random users
  random: initialize the non-blocking pool via add_hwgenerator_randomness()

Pull media documentation updates from Mauro Carvalho Chehab:
 "This patch series does the conversion of all media documentation stuff
  to Restrutured Text markup format and add them to the
  Documentation/index.rst file.

  The media documentation was grouped into 4 books:

    - media uAPI
    - media kAPI
    - V4L driver-specific documentation
    - DVB driver-specific documentation

  It also contains several documentation improvements and one fixup
  patch for a core issue with cropcap.

  PS.  After this patch series, the media DocBook is deprecated and
  should be removed.  I'll add such patch on a future pull request"

* tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (322 commits)
  [media] cx23885-cardlist.rst: add a new card
  [media] doc-rst: add some needed escape codes
  [media] doc-rst: kapi: use :c:func: instead of :cpp:func
  doc-rst: kernel-doc: fix a change introduced by mistake
  [media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
  [media] dvb_ringbuffer.h: some documentation improvements
  [media] v4l2-ctrls.h: fully document the header file
  [media] doc-rst: Fix some typedef ugly warnings
  [media] doc-rst: reorganize the kAPI v4l2 chapters
  [media] rename v4l2-framework.rst to v4l2-intro.rst
  [media] move V4L2 clocks to a separate .rst file
  [media] v4l2-fh.rst: add cross references and markups
  [media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
  [media] v4l2-fh.h: add documentation for it
  [media] v4l2-event.rst: add cross-references and markups
  [media] v4l2-event.h: document all functions
  [media] v4l2-event.rst: add text from v4l2-framework.rst
  [media] v4l2-framework.rst: remove videobuf quick chapter
  [media] v4l2-dev: add cross-references and improve markup
  [media] doc-rst: move v4l2-dev doc to a separate file
  ...

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of driver updates (fcoe, lpfc,
  ufs, qla2xxx, hisi_sas).  The most important other change is removing
  the flag to allow non-blk_mq on a per host basis (it's unused); there
  is still a global module parameter for all of SCSI just in case.

  The rest are an assortment of minor fixes and typo updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
  scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task
  fnic: pci_dma_mapping_error() doesn't return an error code
  scsi: lpfc: avoid harmless comparison warning
  fcoe: implement FIP VLAN responder
  fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame'
  lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held
  scsi: ufs: remove unnecessary goto label
  hpsa: change hpsa_passthru_ioctl timeout
  hpsa: correct skipping masked peripherals
  qla2xxx: Update driver version to 8.07.00.38-k
  qla2xxx: Fix BBCR offset
  qla2xxx: Fix duplicate message id.
  qla2xxx: Disable the adapter and skip error recovery in case of register disconnect.
  qla2xxx: Separate ISP type bits out from device type.
  qla2xxx: Correction to function qla26xx_dport_diagnostics().
  qla2xxx: Add support to handle Loop Init error Asynchronus event.
  qla2xxx: Let DPORT be enabled purely by nvram.
  qla2xxx: Add bsg interface to support statistics counter reset.
  qla2xxx: Add bsg interface to support D_Port Diagnostics.
  qla2xxx: Check for device state before unloading the driver.
  ...

Pull input updates from Dmitry Torokhov:
 "Updates for the input subsystem.  This contains the following new
  drivers promised in the last merge window:

   - driver for touchscreen controller found in Surface 3
   - driver for Pegasus Notetaker tablet
   - driver for Atmel Captouch Buttons
   - driver for Raydium I2C touchscreen controllers
   - powerkey driver for HISI 65xx SoC

  plus a few fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: tty/vt/keyboard - use memdup_user()
  Input: pegasus_notetaker - set device mode in reset_resume() if in use
  Input: pegasus_notetaker - cancel workqueue's work in suspend()
  Input: pegasus_notetaker - fix usb_autopm calls to be balanced
  Input: pegasus_notetaker - handle usb control msg errors
  Input: wacom_w8001 - handle errors from input_mt_init_slots()
  Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y
  Input: pixcir_ts - add support for axis inversion / swapping
  Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes
  Input: edt-ft5x06 - add support for inverting / swapping axes
  Input: of_touchscreen - add support for inverted / swapped axes
  Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report
  Input: synaptics-rmi4 - remove unneeded variable
  Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data
  Input: synaptics-rmi4 - support regulator supplies
  Input: raydium_i2c_ts - check CRC of incoming packets
  Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible
  Input: fix a double word "is is" in include/linux/input.h
  Input: add powerkey driver for HISI 65xx SoC
  Input: apanel - spelling mistake - "skiping" -> "skipping"
  ...

Pull i2c updates from Wolfram Sang:
 "Here is the I2C pull request for 4.8:

   - the core and i801 driver gained support for SMBus Host Notify

   - core support for more than one address in DT

   - i2c_add_adapter() has now better error messages.  We can remove all
     error messages from drivers calling it as a next step.

   - bigger updates to rk3x driver to support rk3399 SoC

   - the at24 eeprom driver got refactored and can now read special
     variants with unique serials or fixed MAC addresses.

  The rest is regular driver updates and bugfixes"

* 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits)
  i2c: i801: use IS_ENABLED() instead of checking for built-in or module
  Documentation: i2c: slave: give proper example for pm usage
  Documentation: i2c: slave: describe buffer problems a bit better
  i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock
  i2c: i2c-smbus: drop useless stubs
  i2c: efm32: fix a failure path in efm32_i2c_probe()
  Revert "i2c: core: Cleanup I2C ACPI namespace"
  Revert "i2c: core: Add function for finding the bus speed from ACPI"
  i2c: Update the description of I2C_SMBUS
  i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation
  eeprom: at24: tweak the loop_until_timeout() macro
  eeprom: at24: add support for at24mac series
  eeprom: at24: support reading the serial number for 24csxx
  eeprom: at24: platform_data: use BIT() macro
  eeprom: at24: split at24_eeprom_write() into specialized functions
  eeprom: at24: split at24_eeprom_read() into specialized functions
  eeprom: at24: hide the read/write loop behind a macro
  eeprom: at24: call read/write functions via function pointers
  eeprom: at24: coding style fixes
  eeprom: at24: move at24_read() below at24_eeprom_write()
  ...

Pull spi updates from Mark Brown:
 "Quite a lot of cleanup and maintainence work going on this release in
  various drivers, and also a fix for a nasty locking issue in the core:

   - A fix for locking issues when external drivers explicitly locked
     the bus with spi_bus_lock() - we were using the same lock to both
     control access to the physical bus in multi-threaded I/O operations
     and exclude multiple callers.

     Confusion between these two caused us to have scenarios where we
     were dropping locks.  These are fixed by splitting into two
     separate locks like should have been done originally, making
     everything much clearer and correct.

   - Support for DMA in spi_flash_read().

   - Support for instantiating spidev on ACPI systems, including some
     test devices used in Windows validation.

   - Use of the core DMA mapping functionality in the McSPI driver.

   - Start of support for ThunderX SPI controllers, involving a very big
     set of changes to the Cavium driver.

   - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036,
     RK3228, RK3368 controllers"

* tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
  spi: Split bus and I/O locking
  spi: octeon: Split driver into Octeon specific and common parts
  spi: octeon: Move include file from arch/mips to drivers/spi
  spi: octeon: Put register offsets into a struct
  spi: octeon: Store system clock freqency in struct octeon_spi
  spi: octeon: Convert driver to use readq()/writeq() functions
  spi: pic32-sqi: fixup wait_for_completion_timeout return handling
  spi: pic32: fixup wait_for_completion_timeout return handling
  spi: rockchip: limit transfers to (64K - 1) bytes
  spi: xilinx: Return IRQ_NONE if no interrupts were detected
  spi: xilinx: Handle errors from platform_get_irq()
  spi: s3c64xx: restore removed comments
  spi: s3c64xx: add Exynos5433 compatible for ioclk handling
  spi: s3c64xx: use error code from clk_prepare_enable()
  spi: s3c64xx: rename goto labels to meaningful names
  spi: s3c64xx: document the clocks and the clock-name property
  spi: s3c64xx: add exynos5433 spi compatible
  spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()
  spi: spi-sh: Remove deprecated create_singlethread_workqueue
  spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue
  ...

Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - LED driver for TI LP3952 6-Channel Color LED

  LED core improvements:
   - Only descend into leds directory when CONFIG_NEW_LEDS is set
   - Add no-op gpio_led_register_device when LED subsystem is disabled
   - MAINTAINERS: Add file patterns for led device tree bindings

  LED Trigger core improvements:
   - return error if invalid trigger name is provided via sysfs

  LED class drivers improvements
   - is31fl32xx: define complete i2c_device_id table
   - is31fl32xx: fix typo in id and match table names
   - leds-gpio: Set of_node for created LED devices
   - pca9532: Add device tree support

  Conversion of IDE trigger to common disk trigger:
   - leds: convert IDE trigger to common disk trigger
   - leds: documentation: 'ide-disk' to 'disk-activity'
   - unicore32: use the new LED disk activity trigger
   - parisc: use the new LED disk activity trigger
   - mips: use the new LED disk activity trigger
   - arm: use the new LED disk activity trigger
   - powerpc: use the new LED disk activity trigger"

* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: is31fl32xx: define complete i2c_device_id table
  leds: is31fl32xx: fix typo in id and match table names
  leds: LED driver for TI LP3952 6-Channel Color LED
  leds: leds-gpio: Set of_node for created LED devices
  leds: triggers: return error if invalid trigger name is provided via sysfs
  leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
  leds: Add no-op gpio_led_register_device when LED subsystem is disabled
  unicore32: use the new LED disk activity trigger
  parisc: use the new LED disk activity trigger
  mips: use the new LED disk activity trigger
  arm: use the new LED disk activity trigger
  powerpc: use the new LED disk activity trigger
  leds: documentation: 'ide-disk' to 'disk-activity'
  leds: convert IDE trigger to common disk trigger
  leds: pca9532: Add device tree support
  MAINTAINERS: Add file patterns for led device tree bindings

Pull IPMI updates from Corey Minyard:
 "Remove some old cruft that was disabled by default a long time ago.

  No modern hardware should need this, and anybody who really doesn't
  have something to automatically detect IPMI can add the device by hand
  on the module commandline or hot add it"

* tag 'for-linus-4.8' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: remove trydefaults parameter and default init