- 08 Dec, 2011 7 commits
-
-
Finn Thain authored
On most 68k Macs the SCC IRQ is an autovector interrupt and cannot be masked. This can be a problem when pmac_zilog starts up. For example, the serial debugging code in arch/m68k/kernel/head.S may be used beforehand. It disables the SCC interrupts at the chip but doesn't ack them. Then when a pmac_zilog port is used, the machine locks up with "unexpected interrupt". This can happen in pmz_shutdown() since the irq is freed before the channel interrupts are disabled. Fix this by clearing interrupt enable bits before the handler is uninstalled. Also move the interrupt control bit flipping into a separate pmz_interrupt_control() routine. Replace all instances of these operations with calls to this routine. Omit the zssync() calls that seem to serve no purpose. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Paul Mackerras authored
This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
At present, on the powernv platform, if you off-line a CPU that was online, and then try to on-line it again, the kernel generates a warning message "OPAL Error -1 starting CPU n". Furthermore, if the CPU is a secondary thread that was used by KVM while it was off-line, the CPU fails to come online. The first problem is fixed by only calling OPAL to start the CPU the first time it is on-lined, as indicated by the cpu_start field of its PACA being zero. The second problem is fixed by restoring the cpu_start field to 1 instead of 0 when using the CPU within KVM. Signed-off-by:
-
Anton Blanchard authored
The minimum RMO size field in ibm,client-architecture is currently ignored, but a future firmware version will rectify that. Since we always get at least 128MB of RMO right now, asking for 64MB is likely to result in boot failures. We should bump it to at least 128MB, but considering all the boot issues we have on 128MB RMO boxes and all new machines have virtual RMO, we may as well set our minimum to 256MB. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
sukadev@linux.vnet.ibm.com authored
With CONFIG_STRICT_DEVMEM=y, user space cannot read any part of /dev/mem. Since this breaks librtas, punch a hole in /dev/mem to allow access to the rmo_buffer that librtas needs. Anton Blanchard reported the problem and helped with the fix. A quick test for this patch: # cat /proc/rtas/rmo_buffer 000000000f190000 10000 # python -c "print 0x000000000f190000 / 0x10000" 3865 # dd if=/dev/mem of=/tmp/foo count=1 bs=64k skip=3865 1+0 records in 1+0 records out 65536 bytes (66 kB) copied, 0.000205235 s, 319 MB/s # dd if=/dev/mem of=/tmp/foo dd: reading `/dev/mem': Operation not permitted 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00022519 s, 0.0 kB/s Signed-off-by:Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
So I've had one of these for a while and it looks like the vendor never bothered submitting the support upstream. This adds it using ppc40x_simple and provides a device-tree. There are some changes to the boot wrapper because the way u-boot works on this thing, it seems to expect a multipart image with the kernel, initrd and dtb in it. The USB support is missing as it needs the yet unmerged driver for the DWC OTG part and the GPIOs may need further definition in the dts. Signed-off-by: -
Benjamin Herrenschmidt authored
-
- 07 Dec, 2011 28 commits
-
-
Benjamin Herrenschmidt authored
-
Benjamin Herrenschmidt authored
It's only used inside the same file where it's defined. There's also no point exporting it anymore. Signed-off-by: -
Benjamin Herrenschmidt authored
Open Firmware on OPAL machines seems to have issues if we close stdin and/or we try to print things after calling "quiesce" so we avoid doing both. Signed-off-by: -
Benjamin Herrenschmidt authored
Signed-off-by: -
Benjamin Herrenschmidt authored
This adds some more interfaces for OPAL v2 Signed-off-by: -
Becky Bruce authored
Define HUGETLB_NEED_PRELOAD in mmu-book3e.h for CONFIG_PPC64 instead of having a much more complicated #if block. This is easier to read and maintain. Signed-off-by:
Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by:
-
Becky Bruce authored
This avoids an extra find_vma() and is less error-prone. Signed-off-by:
-
Becky Bruce authored
Signed-off-by:
-
Becky Bruce authored
Signed-off-by:
-
Becky Bruce authored
Allow hugetlb to be enabled on 64b FSL_BOOK3E. No platforms enable it by default yet. Signed-off-by:
-
Becky Bruce authored
For 64-bit FSL_BOOKE implementations, gigantic pages need to be reserved at boot time by the memblock code based on the command line. This adds the call that handles the reservation, and fixes some code comments. It also removes the previous pr_err when reserve_hugetlb_gpages is called on a system without hugetlb enabled - the way the code is structured, the call is unconditional and the resulting error message spurious and confusing. Signed-off-by:
-
Becky Bruce authored
Before hugetlb, at each level of the table, we test for !0 to determine if we have a valid table entry. With hugetlb, this compare becomes: < 0 is a normal entry 0 is an invalid entry > 0 is huge This works because the hugepage code pulls the top bit off the entry (which for non-huge entries always has the top bit set) as an indicator that we have a hugepage. Signed-off-by: -
Becky Bruce authored
I happened to comment this code while I was digging through it; we might as well commit that. I also made some whitespace changes - the existing code had a lot of unnecessary newlines that I found annoying when I was working on my tiny laptop. No functional changes. Signed-off-by:
-
Becky Bruce authored
The original 32-bit hugetlb implementation used PPC64 vs PPC32 to determine which code path to take. However, the final hugetlb implementation for 64-bit FSL ended up shared with the FSL 32-bit code so the actual check needs to be FSL_BOOK3E vs everything else. This patch changes the include protections to reflect this. There are also a couple of related comment fixes. Signed-off-by:
-
Becky Bruce authored
This updates the hugetlb page table code to handle 64-bit FSL_BOOKE. The previous 32-bit work counted on the inner levels of the page table collapsing. Signed-off-by:
-
Becky Bruce authored
This patch does 2 things: It corrects the code that determines the size to write into MAS1 for the PPC_MM_SLICES case (this originally came from David Gibson and I had incorrectly altered it), and it changes the methodolody used to calculate the size for !PPC_MM_SLICES to work for 64-bit as well as 32-bit. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Becky Bruce authored
There was an unconditional return of "1" in the original code from David Gibson, and I dropped it because it wasn't needed for FSL BOOKE 32-bit. However, not all systems (including 64-bit FSL BOOKE) do loading of the hpte from the fault handler asm and depend on this function returning 1, which causes a call to update_mmu_cache() that writes an entry into the tlb. Signed-off-by:
-
Becky Bruce authored
If we don't have slices, we should be able to use the generic hugetlb_get_unmapped_area() code Signed-off-by:
-
Kyle Moffett authored
The Cell and PowerMac platforms use virtually identical cascaded-IRQ setup code, so just merge it into the core. Ideally this code would trigger automatically when an MPIC device-node specifies an "interrupts" property, perhaps even enabling MPIC_SECONDARY along the way. Unfortunately, Benjamin Herrenschmidt has had bad experiences in the past with the quality of Apple PowerMac device-trees, so to be safe we will only try to parse out an IRQ if the MPIC_SECONDARY flag is set by the caller. Signed-off-by:
Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by:
-
Kyle Moffett authored
Store the node pointer in the MPIC during initialization so that all of the later operational code can just reuse the cached pointer. Signed-off-by:
-
Kyle Moffett authored
There's not really any reason to have this one-liner in a separate static inline function, given that all the other similar tests are already in the alloc_mpic() code. Signed-off-by:
-
Kyle Moffett authored
Don't open-code the OpenFirmware "dcr-reg" property lookup trying to map DCR resources. This makes the code a bit easier to read. Signed-off-by:
-
Kyle Moffett authored
It turns out that there are only 2 in-tree platforms which use MPICs which are not "primary": IBM Cell and PowerMac. To reduce the complexity of the typical board setup code, invert the MPIC_PRIMARY bit into MPIC_SECONDARY. Signed-off-by:
-
Kyle Moffett authored
Almost all PowerPC platforms use a standard "open-pic" device node so the mpic_alloc() function now accepts NULL for the device-node. This will cause it to perform a default search with of_find_matching_node(). Signed-off-by:
-
Kyle Moffett authored
The MPIC code can already perform an automatic OF address translation step as part of mpic_alloc(), but several boards need to use that base address when they perform mpic_assign_isu(). The easiest solution is to save the computed physical address into the "struct mpic" for later use by the board code. Signed-off-by:
-
Kyle Moffett authored
All of the existing callers of mpic_alloc() pass in a non-NULL device-node pointer, so the checks for a NULL device-node may be removed. Signed-off-by:
-
Kyle Moffett authored
Instead of using the open-coded "reg" property lookup and address translation in mpic_alloc(), directly call of_address_to_resource(). This includes various workarounds for special cases which the naive of_address_translate() does not. Afterwards it is possible to remove the copiously copy-pasted calls to of_address_translate() from the 85xx/86xx/powermac platforms. Signed-off-by:
-
Kyle Moffett authored
This removes a bunch of "extern" declarations and CONFIG_SMP ifdefs. Signed-off-by:
-
- 28 Nov, 2011 5 commits
-
-
Dan McGee authored
Since commit 8a0a9bd4, this comment in mmap_rnd() does not hold true as the value returned by get_random_int() will in fact be different every single call. Remove the comment and simplify the code back to its original desired form. This reverts commit a5adc91a which is no longer necessary and also fixes the sparc code that copied this same adjustment. Signed-off-by:
Dan McGee <dpmcgee@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Anton Blanchard authored
During kdump stress testing I sometimes see the kdump kernel panic with: Interrupt 0x306 (real) is invalid, disabling it. Kernel panic - not syncing: bad return code EOI - rc = -4, value=ff000306 Instead of panicing print the error message, dump the stack the first time it happens and continue on. Add some more information to the debug messages as well. Signed-off-by:
-
Anton Blanchard authored
On a 64bit book3s machine I have an oops from a system reset that claims the book3e CE bit was set: MSR: 8000000000021032 <ME,CE,IR,DR> CR: 24004082 XER: 00000010 On a book3s machine system reset sets IBM bit 46 and 47 depending on the power saving mode. Separate the definitions by type and for completeness add the rest of the bits in. Signed-off-by:
-
Matthew McClintock authored
In lieu of having multiple similiar lines, we can just have one generic cpu-as line for CONFIG_ALTIVEC Signed-off-by: -
Dmitry Eremin-Solenikov authored
CPC925/CPC945 use special window to access host bridge functionality of u3-ht. Provide a way to access this device. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
