The previous implementation wrote only the status of each request.
This patch implements a more accurate block device simulator,
providing a ramdisk-like behavior and adding input validation.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-13-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This will allow running vDPA for virtio block protocol.

It's a preliminary implementation with a simple request handling:
for each request, only the status (last byte) is set.
It's always set to VIRTIO_BLK_S_OK.

Also input validation is missing and will be added in the next commits.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-12-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Since the config checks are done by the vDPA drivers, we can remove the
virtio-net restriction and we should be able to support all kinds of
virtio devices.

<linux/virtio_net.h> is not needed anymore, but we need to include
<linux/slab.h> to avoid compilation failures.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-11-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Let's use the new 'get_config_size()' callback available instead of
using the 'virtio_id' to get the size of the device config space.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-10-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

This new callback is used to get the size of the configuration space
of vDPA devices.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-9-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vringh_getdesc_iotlb() allocates memory to store the kvec, that
is freed with vringh_kiov_cleanup().

vringh_getdesc_iotlb() is able to reuse a kvec previously allocated,
so in order to avoid to allocate the kvec for each request, we are
not calling vringh_kiov_cleanup() when we finished to handle a
request, but we should call it when we free the entire device.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-8-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This new helper returns the total number of bytes covered by
a vringh_kiov.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-7-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

In some cases, it may be useful to provide a way to skip a number
of bytes in a vringh_kiov.

Let's implement vringh_kiov_advance() for this purpose, reusing the
code from vringh_iov_xfer().
We replace that code calling the new vringh_kiov_advance().
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-6-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

riov and wiov can be reused with subsequent calls of vringh_getdesc_*().

Let's add a paragraph in the documentation of these functions to better
explain when riov and wiov need to be cleaned up.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-5-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

__vringh_iov() overwrites the contents of riov and wiov, in fact it
resets the 'i' and 'used' fields, but also the 'consumed' field should
be reset to avoid an inconsistent state.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-4-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Usually iotlb accesses are synchronized with a spinlock.
Let's request it as a new parameter in vringh_set_iotlb() and
hold it when we navigate the iotlb in iotlb_translate() to avoid
race conditions with any new additions/deletions of ranges from
the ioltb.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-3-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

The identical mapping used until now created issues when mapping
different virtual pages with the same physical address.
To solve this issue, we can use the iova module, to handle the IOVA
allocation.
For simplicity we use an IOVA allocator with byte granularity.

We add two new functions, vdpasim_map_range() and vdpasim_unmap_range(),
to handle the IOVA allocation and the registration into the IOMMU/IOTLB.
These functions are used by dma_map_ops callbacks.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-2-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit deduces the VIRTIO device ID of a probed
device from its pdev device ids.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210317094933.16417-8-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vDPA requres VIRTIO_F_ACCESS_PLATFORM as a must, this commit
examines this when set features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-7-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit would read and store device feature
bits when probe.

rename ifcvf_get_features() to ifcvf_get_hw_features(),
it reads and stores features of the probed device.

new ifcvf_get_features() simply returns stored
feature bits.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-6-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit removes the version number string, using kernel
version is enough.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-5-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

IFCVF driver probes multiple types of devices now,
to distinguish the original device driven by IFCVF
from others, it is renamed as "N3000".
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-4-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-net
for vDPA
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-3-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

In this commit, ifcvf_get_vendor_id() will return
a device specific vendor id of the probed pci device
than a hard code.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-2-lingshan.zhu@intel.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

The virtqueue doorbell is usually implemented via registeres but we
don't provide the necessary vma->flags like VM_PFNMAP. This may cause
several issues e.g when userspace tries to map the doorbell via vhost
IOTLB, kernel may panic due to the page is not backed by page
structure. This patch fixes this by setting the necessary
vm_flags. With this patch, try to map doorbell via IOTLB will fail
with bad address.

Cc: stable@vger.kernel.org
Fixes: ddd89d0a ("vhost_vdpa: support doorbell mapping via mmap")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210413091557.29008-1-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch reports the per vq doorbell location and size to vDPA
bus. Userspace can then map the doorbell via mmap() via vhost-vDPA bus
driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-8-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

Sometimes it might be useful to report the capability physical
address. One example is to report the physical address of the doorbell
in order to be mapped by userspace.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-7-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

No user now and the capability should not be setup
externally. Instead, every access to the capability should be done via
virtio_pci_modern_device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-6-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

All users (both virtio-pci library and vp_vdpa driver) has been
switched to use vp_modern_map_vq_notify(). So there's no need to
export the low level helper of vp_modern_get_queue_notify_off().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-5-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

This patch switches to use vp_vdpa to use vp_modern_map_notify().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-4-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

This patch switch to use vp_modern_map_notify() for virtio-pci
library.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-3-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

This patch factors out the logic of vq notify area mapping. Following
patches will switch to use this common helpers for both virtio_pci
library and virtio-pci vDPA driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210415073147.19331-2-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>

Not all virtio_net devices support the ctrl queue feature. Thus, there
is no need to allocate unused resources.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210502093319.61313-1-mgurtovoy@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Typo: compation --> compaction
Signed-off-by: Liu Xiang <liu.xiang@zlingsmart.com>
Link: https://lore.kernel.org/r/20210327031710.16151-1-liu.xiang@zlingsmart.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

Follow comment style mentioned in the Writing kernel-doc document [1].

Following warnings are fixed.

$ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c
drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device
drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device'
drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device
drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device'
drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device
drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device'
drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device
drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device
drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver
drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver'
drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver
drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register
drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register'

After the fix:

scripts/kernel-doc -v -none drivers/vdpa/vdpa.c
drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device
drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device
drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device
drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device
drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device
drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver
drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver
drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register

[1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.htmlSigned-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Follow comment style mentioned in the Writing kernel-doc document [1].

Following warnings are fixed.
$ scripts/kernel-doc -v -none include/linux/vdpa.h
include/linux/vdpa.h:11: warning: missing initial short description on line:
 * vDPA callback definition.
include/linux/vdpa.h:11: info: Scanning doc for vDPA
include/linux/vdpa.h:15: warning: cannot understand function prototype: 'struct vdpa_callback '
include/linux/vdpa.h:21: warning: missing initial short description on line:
 * vDPA notification area
include/linux/vdpa.h:21: info: Scanning doc for vDPA
include/linux/vdpa.h:25: warning: cannot understand function prototype: 'struct vdpa_notification_area '
include/linux/vdpa.h:31: warning: missing initial short description on line:
 * vDPA vq_state definition
include/linux/vdpa.h:31: info: Scanning doc for vDPA
include/linux/vdpa.h:34: warning: cannot understand function prototype: 'struct vdpa_vq_state '
include/linux/vdpa.h:41: info: Scanning doc for vDPA device
include/linux/vdpa.h:51: warning: cannot understand function prototype: 'struct vdpa_device '
include/linux/vdpa.h:62: info: Scanning doc for vDPA IOVA range
include/linux/vdpa.h:66: warning: cannot understand function prototype: 'struct vdpa_iova_range '
include/linux/vdpa.h:72: info: Scanning doc for vDPA_config_ops
include/linux/vdpa.h:203: warning: cannot understand function prototype: 'struct vdpa_config_ops '
include/linux/vdpa.h:270: info: Scanning doc for vdpa_driver
include/linux/vdpa.h:275: warning: cannot understand function prototype: 'struct vdpa_driver '
include/linux/vdpa.h:347: info: Scanning doc for vdpa_mgmtdev_ops
include/linux/vdpa.h:360: warning: cannot understand function prototype: 'struct vdpa_mgmtdev_ops '

After this fix:

scripts/kernel-doc -v -none include/linux/vdpa.h
include/linux/vdpa.h:11: info: Scanning doc for struct vdpa_calllback
include/linux/vdpa.h:21: info: Scanning doc for struct vdpa_notification_area
include/linux/vdpa.h:31: info: Scanning doc for struct vdpa_vq_state
include/linux/vdpa.h:41: info: Scanning doc for struct vdpa_device
include/linux/vdpa.h:62: info: Scanning doc for struct vdpa_iova_range
include/linux/vdpa.h:72: info: Scanning doc for struct vdpa_config_ops
include/linux/vdpa.h:270: info: Scanning doc for struct vdpa_driver
include/linux/vdpa.h:347: info: Scanning doc for struct vdpa_mgmtdev_ops

[1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.htmlSigned-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210406170457.98481-2-parav@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Allow to control vdpa device creation and destruction using the vdpa
management tool.

Examples:
1. List the management devices
$ vdpa mgmtdev show
pci/0000:3b:00.1:
  supported_classes net

2. Create vdpa instance
$ vdpa dev add mgmtdev pci/0000:3b:00.1 name vdpa0

3. Show vdpa devices
$ vdpa dev show
vdpa0: type network mgmtdev pci/0000:3b:00.1 vendor_id 5555 max_vqs 16 \
max_vq_size 256
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210408091320.4600-1-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch introduce a vDPA driver for virtio-pci device. It bridges
the virtio-pci control command to the vDPA bus. This will be used for
features prototyping and testing.

Note that get/restore virtqueue state is not supported which needs
extension on the virtio specification.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-4-jasowang@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix potential NULL pointer dereference in the auxtrace option parser

 - Fix access to PID in an array when setting a PID filter in 'perf ftrace'

 - Fix error return code in the 'perf data' tool and in maps__clone(),
   found using a static analysis tool from Huawei

* tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf map: Fix error return code in maps__clone()
  perf ftrace: Fix access to pid in array when setting a pid filter
  perf auxtrace: Fix potential NULL pointer dereference
  perf data: Fix error return code in perf_data__create_dir()

Pull x86 perf fixes from Borislav Petkov:

 - Fix Broadwell Xeon's stepping in the PEBS isolation table of CPUs

 - Fix a panic when initializing perf uncore machinery on Haswell and
   Broadwell servers

* tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
  perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

Pull locking fix from Borislav Petkov:
 "Fix ordering in the queued writer lock's slowpath"

* tag 'locking_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

Pull scheduler fix from Borislav Petkov:
 "Fix a typo in a macro ifdeffery"

* tag 'sched_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt/dynamic: Fix typo in macro conditional statement

Pull x86 fix from Borislav Petkov:
 "Fix an out-of-bounds memory access when setting up a crash kernel with
  kexec"

* tag 'x86_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

Pull kvm fix from Paolo Bonzini:
 "Fix SRCU bug introduced in the merge window"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/xen: Take srcu lock when accessing kvm_memslots()