Pull sound fixes from Takashi Iwai:
 "Lots of small fixes:

   - A race fix for debugfs handling in ALSA core

   - A series of corrections for MIDI2 core format conversions

   - ASoC Intel fixes for 16 bit DMIC config

   - Updates for missing module parameters in ASoC code

   - HD-audio quirk, Cirrus codec fix, etc minor fixes"

* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: seq: ump: Fix swapped song position pointer data
  ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
  ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
  ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
  ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
  ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
  ALSA: seq: Fix yet another spot for system message conversion
  ALSA: ump: Set default protocol when not given explicitly
  ALSA: ump: Don't accept an invalid UMP protocol number
  ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
  ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
  ALSA: pcm: fix typo in comment
  ALSA: ump: Don't clear bank selection after sending a program change
  ALSA: seq: Fix incorrect UMP type for system messages
  ALSA/hda: intel-dsp-config: reduce log verbosity
  ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
  ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
  ASoC: SOF: add missing MODULE_DESCRIPTION()
  ASoC: SOF: reorder MODULE_ definitions
  ASoC: SOF: AMD: group all module related information
  ...

Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - a use-after-free bugfix

 - Kconfig fixes for randconfig builds

 - allow setting touchscreen_dmi quirks from the cmdline for debugging

 - touchscreen_dmi quirks for two new laptop/tablet models

* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
  platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
  platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
  platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
  platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
  platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid pt_regs aliasing with idle thread stacks on secondary
   harts.

 - HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
   issues on XIP systems with huge pages.

 - An update to the uABI documentation clarifying that only scalar
   misaligned accesses were grandfathered in as supported, as the vector
   extension did not exist at the time the uABI was frozen.

 - A fix for the recently-added byte/half atomics to avoid losing the
   fully ordered decorations.

* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
  Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
  riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
  riscv: prevent pt_regs corruption for secondary idle threads

Pull bcachefs fixes from Kent Overstreet:
 "Assorted odds and ends...

   - two downgrade fixes

   - a couple snapshot deletion and repair fixes, thanks to noradtux for
     finding these and providing the image to debug them

   - a couple assert fixes

   - convert to folio helper, from Matthew

   - some improved error messages

   - bit of code reorganization (just moving things around); doing this
     while things are quiet so I'm not rebasing fixes past reorgs

   - don't return -EROFS on inconsistency error in recovery, this
     confuses util-linux and has it retry the mount

   - fix failure to return error on misaligned dio write; reported as an
     issue with coreutils shred"

* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
  bcachefs: Fix failure to return error on misaligned dio write
  bcachefs: Don't return -EROFS from mount on inconsistency error
  bcachefs: Fix uninitialized var warning
  bcachefs: Split out sb-errors_format.h
  bcachefs: Split out journal_seq_blacklist_format.h
  bcachefs: Split out replicas_format.h
  bcachefs: Split out disk_groups_format.h
  bcachefs: split out sb-downgrade_format.h
  bcachefs: split out sb-members_format.h
  bcachefs: Better fsck error message for key version
  bcachefs: btree_gc can now handle unknown btrees
  bcachefs: add missing MODULE_DESCRIPTION()
  bcachefs: Fix setting of downgrade recovery passes/errors
  bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
  bcachefs: Refactor delete_dead_snapshots()
  bcachefs: Fix locking assert
  bcachefs: Fix lookup_first_inode() when inode_generations are present
  bcachefs: Plumb bkey into __btree_err()
  bcachefs: Use copy_folio_from_iter_atomic()
  bcachefs: Fix sb-downgrade validation
  ...

At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored.  It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.

Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.10

Several serieses of fixes that have come in since the merge window,
mostly for Intel systems.  The biggest thing is some updates from Peter
which fix support for a series of Intel laptops which have been found to
use 16 bit rather than 32 bit DMIC configuration blobs in their firmware
descriptions.  We also have a bunch of fixes for module annotations, and
some smaller single patch fixes.

The fully ordered versions of xchg[8|16]() using LR/SC lack the
necessary memory barriers to guarantee the order.

Fix this by matching what is already implemented in the fully ordered
versions of cmpxchg() using LR/SC.
Suggested-by: Andrea Parri <parri.andrea@gmail.com>
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Closes: https://lore.kernel.org/linux-riscv/ZlYbupL5XgzgA0MX@andrea/T/#u
Fixes: a8ed2b7a ("riscv/cmpxchg: Implement xchg for variables of size 1 and 2")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240530145546.394248-1-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

We're stuck supporting scalar misaligned loads in userspace because they
were part of the ISA at the time we froze the uABI.  That wasn't the
case for vector misaligned accesses, so depending on them
unconditionally is a userspace bug.  All extant vector hardware traps on
these misaligned accesses.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240524185600.5919-1-palmer@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on
!XIP_KERNEL.

This also fixes a boot problem for XIP kernel introduced by the commit in
"Fixes:". This commit used huge page mapping for vmemmap, but huge page
vmap was not enabled for XIP kernel.

Fixes: ff172d48 ("riscv: Use hugepage mappings for vmemmap")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240526110104.470429-1-namcao@linutronix.deSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.

Similar issue has been fixed for the primary hart, see c7cdd96e
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context.

Fixes: 9a2451f1 ("RISC-V: Avoid using per cpu array for ordered booting")
Fixes: 2875fe05 ("RISC-V: Add cpu_ops and modify default booting method")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240523084327.2013211-1-geomatsi@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - gro: initialize network_offset in network layer

   - tcp: reduce accepted window in NEW_SYN_RECV state

  Current release - new code bugs:

   - eth: mlx5e: do not use ptp structure for tx ts stats when not
     initialized

   - eth: ice: check for unregistering correct number of devlink params

  Previous releases - regressions:

   - bpf: Allow delete from sockmap/sockhash only if update is allowed

   - sched: taprio: extend minimum interval restriction to entire cycle
     too

   - netfilter: ipset: add list flush to cancel_gc

   - ipv4: fix address dump when IPv4 is disabled on an interface

   - sock_map: avoid race between sock_map_close and sk_psock_put

   - eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
     status rules

  Previous releases - always broken:

   - core: fix __dst_negative_advice() race

   - bpf:
       - fix multi-uprobe PID filtering logic
       - fix pkt_type override upon netkit pass verdict

   - netfilter: tproxy: bail out if IP has been disabled on the device

   - af_unix: annotate data-race around unix_sk(sk)->addr

   - eth: mlx5e: fix UDP GSO for encapsulated packets

   - eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
     buffers

   - eth: i40e: fully suspend and resume IO operations in EEH case

   - eth: octeontx2-pf: free send queue buffers incase of leaf to inner

   - eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"

* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  netdev: add qstat for csum complete
  ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
  net: ena: Fix redundant device NUMA node override
  ice: check for unregistering correct number of devlink params
  ice: fix 200G PHY types to link speed mapping
  i40e: Fully suspend and resume IO operations in EEH case
  i40e: factoring out i40e_suspend/i40e_resume
  e1000e: move force SMBUS near the end of enable_ulp function
  net: dsa: microchip: fix RGMII error in KSZ DSA driver
  ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
  net: fix __dst_negative_advice() race
  nfc/nci: Add the inconsistency check between the input data length and count
  MAINTAINERS: dwmac: starfive: update Maintainer
  net/sched: taprio: extend minimum interval restriction to entire cycle too
  net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
  netfilter: nft_fib: allow from forward/input without iif selector
  netfilter: tproxy: bail out if IP has been disabled on the device
  netfilter: nft_payload: skbuff vlan metadata mangle support
  net: ti: icssg-prueth: Fix start counter for ft1 filter
  sock_map: avoid race between sock_map_close and sk_psock_put
  ...

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).

The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).

These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.

Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.

[1] https://github.com/thesofproject/linux/issues/4973

Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.

In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.

In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.

In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel

Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.

Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.

No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.

As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.

Fixes: f9209644 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Recent commit 0cfe71f4 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f4 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

We fixed the incorrect UMP type for system messages in the recent
commit, but it missed one place in system_ev_to_ump_midi1().
Fix it now.

Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events")
Fixes: c2bb79613fed ("ALSA: seq: Fix incorrect UMP type for system messages")
Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will
hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path.

WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70
Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper
CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_mc_loop+0x2d/0x70
Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c
RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212
RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000
RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00
R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000
R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000
FS:  0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
 ? __warn (kernel/panic.c:693)
 ? sk_mc_loop (net/core/sock.c:760)
 ? report_bug (lib/bug.c:201 lib/bug.c:219)
 ? handle_bug (arch/x86/kernel/traps.c:239)
 ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
 ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
 ? sk_mc_loop (net/core/sock.c:760)
 ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1))
 ? nf_hook_slow (net/netfilter/core.c:626)
 ip6_finish_output (net/ipv6/ip6_output.c:222)
 ? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215)
 ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan
 ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan
 dev_hard_start_xmit (net/core/dev.c:3594)
 sch_direct_xmit (net/sched/sch_generic.c:343)
 __qdisc_run (net/sched/sch_generic.c:416)
 net_tx_action (net/core/dev.c:5286)
 handle_softirqs (kernel/softirq.c:555)
 __irq_exit_rcu (kernel/softirq.c:589)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043)

The warning triggers as this:
packet_sendmsg
   packet_snd //skb->sk is packet sk
      __dev_queue_xmit
         __dev_xmit_skb //q->enqueue is not NULL
             __qdisc_run
               sch_direct_xmit
                 dev_hard_start_xmit
                   ipvlan_start_xmit
                      ipvlan_xmit_mode_l3 //l3 mode
                        ipvlan_process_outbound //vepa flag
                          ipvlan_process_v6_outbound
                            ip6_local_out
                                __ip6_finish_output
                                  ip6_finish_output2 //multicast packet
                                    sk_mc_loop //sk->sk_family is AF_PACKET

Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this.

Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240529095633.613103-1-yuehaibing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 syzbot reports that nf_reinject() could be called without
         rcu_read_lock() when flushing pending packets at nfnetlink
         queue removal, from Eric Dumazet.

Patch #2 flushes ipset list:set when canceling garbage collection to
         reference to other lists to fix a race, from Jozsef Kadlecsik.

Patch #3 restores q-in-q matching with nft_payload by reverting
         f6ae9f12 ("netfilter: nft_payload: add C-VLAN support").

Patch #4 fixes vlan mangling in skbuff when vlan offload is present
         in skbuff, without this patch nft_payload corrupts packets
         in this case.

Patch #5 fixes possible nul-deref in tproxy no IP address is found in
         netdevice, reported by syzbot and patch from Florian Westphal.

Patch #6 removes a superfluous restriction which prevents loose fib
         lookups from input and forward hooks, from Eric Garver.

My assessment is that patches #1, #2 and #5 address possible kernel
crash, anything else in this batch fixes broken features.

netfilter pull request 24-05-29

* tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_fib: allow from forward/input without iif selector
  netfilter: tproxy: bail out if IP has been disabled on the device
  netfilter: nft_payload: skbuff vlan metadata mangle support
  netfilter: nft_payload: restore vlan q-in-q match support
  netfilter: ipset: Add list flush to cancel_gc
  netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()
====================

Link: https://lore.kernel.org/r/20240528225519.1155786-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.

This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jacob Keller says:

====================
Intel Wired LAN Driver Updates 2024-05-28 (e1000e, i40e, ice) [part]

This series includes a variety of fixes that have been accumulating on the
Intel Wired LAN dev-queue.

Hui Wang provides a fix for suspend/resume on e1000e due to failure
to correctly setup the SMBUS in enable_ulp().

Thinh Tran provides a fix for EEH I/O suspend/resume on i40e to
ensure that I/O operations can continue after a resume. To avoid duplicate
code, the common logic is factored out of i40e_suspend and i40e_resume.

Paul Greenwalt provides a fix to correctly map the 200G PHY types to link
speeds in the ice driver.

Dave Ertman provides a fix correcting devlink parameter unregistration in
the event that the driver loads in safe mode and some of the parameters
were not registered.
====================

Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-0-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register.  One situation when this test returns true is when the
driver loads in safe mode.  The same check is not present on the unload
path when devlink params are unregistered.  This results in the driver
triggering a WARN_ON in the kernel devlink code.

The current check and code path uses a reduction in the number of elements
reported in the list of params.  This is fragile and not good for future
maintaining.

Change the parameters to be held in two lists, one always registered and
one dependent on the check.

Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.

Fixes: 109eb291 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 24407a01 ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.

To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().

Fixes: 24407a01 ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.

- In the PCI error detected callback, replaced i40e_prep_for_reset()
  with i40e_io_suspend(). The change is to fully suspend all I/O
  operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
  with pci_enable_device(). This change enables both I/O and memory of
  the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
  with i40e_io_resume(). This change allows the system to resume I/O
  operations

Fixes: a5f3d2c1 ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced.  These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively.  This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover.  The functions are now used
in the EEH handling for device suspend/resume callbacks.

The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The commit 861e8086 ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):

    [   43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx

Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.

Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.

The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).

And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].

Fixes: 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver should return RMII interface when XMII is running in RMII mode.

Fixes: 0ab7f6bf ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A recent change to inet_dump_ifaddr had the function incorrectly iterate
over net rather than tgt_net, resulting in the data coming for the
incorrect network namespace.

Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://github.com/lxc/incus/issues/892Bisected-by: Stéphane Graber <stgraber@stgraber.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Stéphane Graber <stgraber@stgraber.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240528203030.10839-1-aleksandr.mikhalitsyn@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.

RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).

Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.

Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.

Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.

Many thanks to Clement Lecigne for tracking this issue.

This old bug became visible after the blamed commit, using UDP sockets.

Fixes: a87cb3e4 ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This was reported as an error when running coreutils shred.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior.  Better to assume a
valid protocol found in the protocol capability bits instead.

For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.

Link: https://lore.kernel.org/r/20240529164723.18309-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

When a UMP Stream Configuration message is received, the driver tries
to switch the protocol, but there was no sanity check of the protocol,
hence it can pass an invalid value.  Add the check and bail out if a
wrong value is passed.

Fixes: a7980768 ("ALSA: ump: Add helper to change MIDI protocol")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 681ce862.

We gave it a try, but it turns out the kernel test robot did in fact
find performance regressions for it, so we'll have to look at the more
involved alternative fixes for Yafang Shao's Elasticsearch load issue.

There were several alternatives discussed, they just weren't as simple
as this first attempt.

The report is of a -7.4% regression of filebench.sum_operations/s, which
appears significant enough to trigger my "this patch may get reverted if
somebody finds a performance regression on some other load" rule.

So it's still the case that we should end up deleting dentries more
aggressively - or just be better at pruning them later - but it needs a
bit more finesse than this simple thing.

Link: https://lore.kernel.org/all/202405291318.4dfbb352-oliver.sang@intel.com/
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull 9p fixes from Dominique Martinet:
 "Two fixes headed to stable trees:

   - a trace event was dumping uninitialized values

   - a missing lock that was thought to have exclusive access, and it
     turned out not to"

* tag '9p-for-6.10-rc2' of https://github.com/martinetd/linux:
  9p: add missing locking around taking dentry fid list
  net/9p: fix uninit-value in p9_client_rpc()

Pull crypto fix from Herbert Xu:
 "This fixes a new run-time warning triggered by tpm"

* tag 'v6.10-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Remove add_early_randomness

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.

If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.

Fixes: 648fea12 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)

Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().

Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.

Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>