An error occurred fetching the project authors.
- 22 May, 2015 15 commits
-
-
Daniel Axtens authored
Move the Cell platform to use the pci_controller_ops structure rather than ppc_md for MSI related PCI controller operations. We can be confident that the functions will be added to the platform's ops struct before any PCI controller's ops struct is populated because: 1) These ops are added to the struct in a subsys initcall. We populate the ops in axon_msi_probe, which is the probe call for the axon-msi driver. However the driver is registered in axon_msi_init, which is a subsys initcall, so this will happen at the subsys level. 2) The controller recieves the struct later, in a device initcall. Cell populates the controller in cell_setup_phb, which is hooked up to ppc_md.pci_setup_phb. ppc_md.pci_setup_phb is only ever called in of_platform.c, as part of the OpenFirmware PCI driver's probe routine. That driver is registered in a device initcall, so it will occur *after* the struct is properly populated. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Daniel Axtens authored
Move the PowerNV/BML platform to use the pci_controller_ops structure rather than ppc_md for MSI related PCI controller operations. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Daniel Axtens authored
Add MSI setup and teardown functions to pci_controller_ops. Patch the callsites (arch_{setup,teardown}_msi_irqs) to prefer the controller ops version if it's available. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
All users of the old opal events notifier have been converted over to the irq domain so remove the event notifier functions. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Convert the opal dump driver to the new opal irq domain. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
This patch converts the elog code to use the opal irq domain instead of notifier events. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
This patch converts the opal message event to use the new opal irq domain. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
The eeh code currently uses the old notifier method to get eeh events from OPAL. It also contains some logic to filter opal events which has been moved into the virtual irqchip. This patch converts the eeh code to the new event interface which simplifies event handling. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Convert the opal hvc driver to use the new irqchip to register for opal events. As older firmware versions may not have device tree bindings for the interrupt parent we just use a hardcoded hwirq based on the event number. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Convert the opal ipmi driver to use the new irq interface for events. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Whenever an interrupt is received for opal the linux kernel gets a bitfield indicating certain events that have occurred and need handling by the various device drivers. Currently this is handled using a notifier interface where we call every device driver that has registered to receive opal events. This approach has several drawbacks. For example each driver has to do its own checking to see if the event is relevant as well as event masking. There is also no easy method of recording the number of times we receive particular events. This patch solves these issues by exposing opal events via the standard interrupt APIs by adding a new interrupt chip and domain. Drivers can then register for the appropriate events using standard kernel calls such as irq_of_parse_and_map(). Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Most of the OPAL subsystems are always compiled in for PowerNV and many of them need to be initialised before or after other OPAL subsystems. Rather than trying to control this ordering through machine initcalls it is clearer and easier to control initialisation order with explicit calls in opal_init. Signed-off-by: Alistair Popple <alistair@popple.id.au> Cc: Mahesh Jagannath Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Shreyas B. Prabhu authored
Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Shreyas B. Prabhu authored
This is a cleanup patch; doesn't change any functionality. Moves all cpuidle related code from setup.c to a new file. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> [mpe: Fix the SMP=n build by including asm/smp.h in idle.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Shreyas B. Prabhu authored
Currently, cpu_online_cores_map returns a mask, which for every core with at least one online thread, has the bit for thread 0 of the core set to 1, and the bits for all other threads of the core set to 0. But thread 0 of the core itself may not be online always. In such cases, if the returned mask is used for IPI, then it'll cause IPIs to be skipped on cores where the first thread is offline, because the IPI code refuses to send IPIs to offline threads. Fix this by setting the bit of the first online thread in the core. This is done by fixing this in the underlying function cpu_thread_mask_to_cores. The result has the property that for all cores with online threads, there is one bit set in the returned map. And further, all bits that are set in the returned map correspond to online threads. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> [ Changelog from Michael Ellerman <mpe@ellerman.id.au> ] Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 20 May, 2015 1 commit
-
-
Laurent Dufour authored
The commit 8170a83f ("powerpc: Wireup the kcmp syscall to sys_ni") has disabled the kcmp syscall for powerpc. This has been done due to the use of unsigned long parameters which may require a dedicated wrapper to handle 32bit process on top of 64bit kernel. However in the kcmp() case, the 2 unsigned long parameters are currently only used to carry file descriptors from user space to the kernel. Since such a parameter is passed through register, and file descriptor doesn't need to get extended, there is, today, no need for a wrapper. In the case there will be a need to pass address in or out of this system call, then a wrapper could be required, it will then be to care of it. As today this is not the case, it is safe to enable kcmp() on powerpc. Tested (by Laurent) on 64-bit, 32-bit, and 32-bit userspace on 64-bit kernel using tools/testing/selftests/kcmp [mpe]. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 18 May, 2015 1 commit
-
-
Michael Ellerman authored
The only little endian configuration we support is ppc64le, all other configurations are big endian. So we should only offer a choice of endian if we're building for 64-bit Book3S, ie. PPC_BOOK3S_64. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 13 May, 2015 4 commits
-
-
Wei Yang authored
Currently, the macro IS_BRIDGE is not used any where. This patch just removes it. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Wei Yang authored
As the comment indicates, powernv_eeh_get_state() will inform EEH core to delay 1 second. This means the delay doesn't happen when powernv_eeh_get_state() returns. This patch moves the delay subtraction just before msleep(), which is the same logic in pseries_eeh_wait_state(). Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Wei Yang authored
To retrieve the PCI slot state, EEH driver would set a timeout for that. While current comment is not aligned to what the code does. This patch fixes those comments according to the code. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Wei Yang authored
struct pci_io_addr_range{} stores the information of pci resources. It would be better to keep these related fields have the same type as in struct resource{}. This patch fixes the start/end/flags type in struct pci_io_addr_range{} to have the same type as in struct resource{}. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 12 May, 2015 3 commits
-
-
Gavin Shan authored
The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR) to inject the specified EEH error, which is represented by (struct vfio_eeh_pe_err), to the indicated PE for testing purpose. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
The patch defines PCI error types and functions in uapi/asm/eeh.h and exports function eeh_pe_inject_err(), which will be called by VFIO driver to inject the specified PCI error to the indicated PE for testing purpose. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
There are two equivalent sets of PE state constants, defined in arch/powerpc/include/asm/eeh.h and include/uapi/linux/vfio.h. Though the names are different, their corresponding values are exactly same. The former is used by EEH core and the latter is used by userspace. The patch moves those constants from arch/powerpc/include/asm/eeh.h to arch/powerpc/include/uapi/asm/eeh.h, which are expected to be used by userspace from now on. We can't delete those constants in vfio.h as it's uncertain that those constants have been or will be used by userspace. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 11 May, 2015 12 commits
-
-
Joel Stanley authored
OpenPower BMC machines do not place any sysparams in the device tree, so at every boot we get a warning: [ 0.437176] SYSPARAM: Opal sysparam node not found Remove the warning, and reorder the init so we don't peform allocations when there is no sysparam node in the device tree. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Traffic on the cbe-oss-dev list is more or less non-existent, other than CC's from linuxppc. It's seems like we may as well just send everyone to linuxppc and archive the list. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jeremy Kerr <jk@ozlabs.org>
-
Michael Ellerman authored
The only little endian configuration we support is ppc64le. As such if we're building little endian we don't need a 32-bit VDSO, because there is no 32-bit userspace. This patch is a fairly ugly mess of #ifdefs, but is the minimal logic required to disable the 32-bit VDSO. We can hopefully clean up the result in future with some further refactoring. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
In vdso_fixup_features() we have start64/start32 and size64/size32, but they have the same types, ie. void * and unsigned long. They're only used to save the return value from find_sectionXX() for the subsequent call to do_feature_fixups(), so there's no overlap in their usage either. So we can just consolidate them into start/size and avoid the duplication. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
It's in the git history if we ever need it back. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
There is a bug in binutils 2.24 which causes miscompilation if we're building little endian and using weak symbols (which the kernel does). It is fixed in binutils commit 57fa7b8c7e59 "Correct elf_merge_st_other arguments for weak symbols", which is in binutils 2.25 and has been backported to the binutils 2.24 branch and has been picked up by most distros it seems. However if we're running stock 2.24 (no extra version) then the bug is present, so check for that and bail. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
We have several checks for bad gcc versions in our Makefile. These don't apply if we're building with clang, so skip them in that case. The obvious check would be for ${COMPILER} = "gcc", but because of the way the logic in the top level Makefile conditionally sets COMPILER, it's possible that we're building with gcc but COMPILER was not set. So instead check for ${COMPILER} != "clang", which we know is currently the only other possibility. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Currently we print "Starting Linux PPC64" at boot. But we don't mention anywhere whether the kernel is big or little endian. If we print the utsname->machine value instead we get either "ppc64" or "ppc64le" which is much more informative, eg: Starting Linux ppc64le #1 SMP Wed Apr 15 12:12:20 AEST 2015 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
The pasemi MSI code is currently always built when MPIC=y && PCI_MSI=y. It should not have any effect on other platforms, because it immediately checks the MPIC's compatible property for "pasemi,pwrficient-openpic". However it's odd that it's still built even when PASEMI=n. It also needn't be in sysdev, as it's only used by pasemi. So move it into platforms/pasemi, whereby it will only be built for PASEMI=y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
The STRICT_MM_TYPECHECKS code has bit-rotted over the years. To make it possible to easily build test it, make it a CONFIG option. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Nathan Fontenot authored
Failure return from dlpar_configure_connector when dlpar adding cpus results in leaking references to the cpus parent device node. Move the call to of_node_put() prior to checking the result of dlpar_configure_connector. Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Krzysztof Kozlowski authored
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 10 May, 2015 4 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "I really need to get back to sending these on my Friday, instead of my Monday morning, but nothing too amazing in here: a few amdkfd fixes, a few radeon fixes, i915 fixes, one tegra fix and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. drm/tegra: Don't use vblank_disable_immediate on incapable driver. drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc i915 fixes. * tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it
-
Mario Kleiner authored
Since commit 844b03f2 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-