- 27 Apr, 2008 16 commits
-
-
Andrew Vasquez authored
Original code would (incorrectly) only re-register after a loop-down condition. Also, FDMI registration should be enabled by default. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
The driver is incorrectly assuming that the 'sp' reference held in qla2[x00|4xx]_abort_command() is valid after the mailbox command is issued to abort the exchange. It is *not*, as the command may be completed during interrupt context before control is returned to the mailbox caller. Signed-off-by:
-
Andrew Vasquez authored
Earlier code could trigger an infinite-retry if 1st invocation returned a non-CS_COMPLETE status. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Use the more efficient read-DMA'ble-buffer mailbox commands rather than reading a single word/dword at a time. We also remove a bulk of the duplicate mailbox command-handling codes in favor of more generic read-memory() routines (qla2xxx_dump_ram() and qla24xx_dump_ram()). Signed-off-by:
-
Finn Thain authored
Replace the mac_esp driver with a new one based on the esp_scsi core. For esp_scsi: add support for sync transfers for the PIO mode, add a new esp_driver_ops method to get the maximum dma transfer size (like the old NCR53C9x driver), and some cleanups. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Swen Schillig authored
The new FCP adapter statistics provide a variety of information about the virtual adapter (subchannel). In order to collect this information the zfcp driver is extended to query this information. The information provided by the new FCP adapter statistics can be fetched by reading from the following files in the sysfs filesystem /sys/class/scsi_host/host<n>/seconds_active /sys/class/scsi_host/host<n>/requests /sys/class/scsi_host/host<n>/megabytes /sys/class/scsi_host/host<n>/utilization These are the statistics on a virtual adapter (subchannel) level. The information provided is raw and not modified or interpreted by any means. No interpretation or modification of the values is done by the zfcp driver. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
When statistics are polled from sysfs, the statistics use the same commands as the adapter initialization. Change the messages printed here, so they are only printed during initialization and not for each poll of adapter data. Signed-off-by:
-
Swen Schillig authored
When sending a exchange config data command, wait for a free SBAL. This does not matter during adapter initialization, but this is required for pulling adapter statistics during high I/O load. Signed-off-by:
-
James Smart authored
Way back when, when the fc_user_scan routine was created, it kept some of its original logic that walked the rport list and kicked off a scan. Unfortunately, it didn't keep any of the locking around the rport list, nor did it consider the synchronous nature of the scan invoked. The result, there are some scan requests where the rport list changes, thus a subsequent scan is called on a bogus rport structure and the system NMI's. Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Jeff Garzik authored
- where the 'irq' function argument is known never to be used, rename it to 'dummy' to make this more obvious - replace per-irq lookup functions and tables with a direct reference to data object obtained via 'dev_id' function argument, passed from request_irq() Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Randy Dunlap authored
scsi_transport_spi.c needs to #include <linux/sysfs.h>: next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group' make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1 Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Adrian Bunk authored
This patch fixes off-by-one errors in error checks (the variables are used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN elements) spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Hannes Reinecke authored
The function type_check() in aicasm grammar code was never used properly due to a bug. This patch fixes it up and ensures it's only called if appropriate. In addition the unused 16bit instruction are disabled, but left in the code for reference. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
James Bottomley authored
We're getting a WARN_ON from SLUB indicating that we're trying to free caches with in-use objects. The root cause is a new dependency in the command/sense free on unchecked_isa_dma. The WARN_ON is caused by drivers which change this in their setup after the command/sense cache is allocated. The fix is to move the allocation of this cache into scsi_add_host() so things like gdth have an opportunity to modify it between alloc and add (but *not* after). The true fix would be to move unchecked_isa_dma into the template and out of the host, so it because a truly read only variable. Signed-off-by: -
David S. Miller authored
Many of the overflow checks test whether the value has gone negative, and we want to retain such checks. Reported by Julia Lawall. Signed-off-by:
-
- 25 Apr, 2008 1 commit
-
-
Jeff Garzik authored
- remove pointless casts from void* - remove needless references to 'irq' function argument, when that information is already stored somewhere in a driver-private struct. - where the 'irq' function argument is known never to be used, rename it to 'dummy' to make this more obvious - remove always-false tests for dev_id==NULL - remove always-true tests for 'irq == host_struct->irq' - replace per-irq lookup functions and tables with a direct reference to data object obtained via 'dev_id' function argument, passed from request_irq() This change's main purpose is to prepare for the patchset in jgarzik/misc-2.6.git#irq-remove, that explores removal of the never-used 'irq' argument in each interrupt handler. Signed-off-by:
-
- 24 Apr, 2008 3 commits
-
-
Sergei Shtylyov authored
The driver stores the PCI resource address into 'u_long' variable before calling ioremap_nocache() on it. This warrants kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that helps create an illusion that the PCI memory resources are mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Sergei Shtylyov authored
The driver stores the PCI resource address into 'u_long' variable before calling ioremap_nocache() on it. This warrants kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that helps create an illusion that the PCI memory resources are mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. Signed-off-by:
-
Denys Vlasenko authored
Deinlines and moves big functions from .h to .c files. Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files. Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by:
-
- 22 Apr, 2008 20 commits
-
-
FUJITA Tomonori authored
scsi_transport_sas calls blk_cleanup_queue too early for bsg queues. If a user holds a sas_host, end_device, or expander device open, remove the device, then send a request to it, we get a kernel crash. We need to call blk_cleanup_queue in the release callback as we do with scsi devices. This patch moves blk_cleanup_queue to sas_expander_release and sas_end_device_release from sas_bsg_remove. sas_host can't use the release callback in struct device so use bsg's release callback. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
This patch adds release callback support, which is called when a bsg device goes away. bsg_register_queue() takes a pointer to a callback function. This feature is useful for stuff like sas_host that can't use the release callback in struct device. If a caller doesn't need bsg's release callback, it can call bsg_register_queue() with NULL pointer (e.g. scsi devices can use release callback in struct device so they don't need bsg's callback). With this patch, bsg uses kref for refcounts on bsg devices instead of get/put_device in fops->open/release. bsg calls put_device and the caller's release callback (if it was registered) in kref_put's release. Signed-off-by:
-
James Bottomley authored
The current target allocation code registeres each possible target with sysfs; it will be deleted again if no useable LUN on this target was found. This results in a string of 'target add/target remove' uevents. Based on a patch by Hannes Reinecke <hare@suse.de> this patch reworks the target allocation code so that only uevents for existing targets are sent. The sysfs registration is split off from the existing scsi_target_alloc() into a in a new scsi_add_target() function, which should be called whenever an existing target is found. Only then a uevent is sent, so we'll be generating events for existing targets only. Signed-off-by: -
Hannes Reinecke authored
This patch removes the unused sysfs attibute overwriting logic for the scsi host attibutes, and plugs them into the driver core default attribute creation. Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
James Bottomley authored
We now take advantage of the mode_t return of is_valid, and also update the attributes when the target is configured. Signed-off-by: -
James Bottomley authored
We have a problem in scsi_transport_spi in that we need to customise not only the visibility of the attributes, but also their mode. Fix this by making the is_visible() callback return a mode, with 0 indicating is not visible. Also add a sysfs_update_group() API to allow us to change either the visibility or mode of the files at any time on the fly. Acked-by:
-
Hannes Reinecke authored
lpfc and qla2xxx overwrite the standard 'state' attribute with custom callbacks. So rename the custom attributes to 'link_state' and retain the original meaning of the 'state' attribute. Signed-off-by:
-
Hannes Reinecke authored
This patch implements scsi_host and scsi_target device types and adds both to the scsi_bus. Signed-off-by:
-
James Bottomley authored
ses uses an unusual two level class hierarchy which broke in this conversion. Fix it up still with a two level hierarchy, but this time let the ses device manage the links to and from the real device in the enclosure. Signed-off-by: -
James Bottomley authored
There's a change in the SCSI tree that adds another class_device, so change it to an ordinary device [jejb: this one got rebased until it's basically cosmetic only] Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Correct capitalization "IntX" -> "INTx" IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.c IB/ipath: Remove dependency on PCI_MSI || HT_IRQ IB/ipath: Build IBA7220 code unconditionally IB/ipath: Remove reference to dev->class_dev IB/ipath: Fix module parameter description for disable_sma RDMA/nes: Remove unneeded function declarations Fix up conflict in drivers/infiniband/hw/ipath/ipath_verbs.c (by picking the solution from the infiniband branch)
-
Roland Dreier authored
Match what the PCI specification uses. Signed-off-by:Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: -
Roland Dreier authored
Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: -
Roland Dreier authored
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: -
Roland Dreier authored
IB/ipath: Remove reference to dev->class_dev Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: -
Paul Bolle authored
Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by:
-
Roland Dreier authored
Remove redundant static declarations of functions that are defined before they are used in the source. Signed-off-by: -
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (26 commits) mmc: sdio_ops.c should #include "sdio_ops.h" mmc: proper prototypes for mmc_attach_*() mmc: make __mmc_release_bus() static sdhci: improve no card, no reset quirk MMC: OMAP: Do not busy wait for end of command for ever MMC: OMAP: Start new commands from work queue instead of irq MMC: OMAP: Lazy clock shutdown MMC: OMAP: Move failing command abortion to workqueue MMC: OMAP: Use tasklet instead of workqueue for cover switch notification MMC: OMAP: Check the get_cover_state function pointer if not set MMC: OMAP: Using setup_timer instead of init_timer MMC: OMAP: Abort stuck commands MMC: OMAP: General cleanup for MMC multislot support MMC: OMAP: Power functions modified to MMC multislot support MMC: OMAP: Fix timeout calculation for MMC multislot support MMC: OMAP: New release dma and abort xfer functions MMC: OMAP: Add back cover switch support MMC: OMAP: Introduce new multislot structure and change driver to use it MMC: OMAP: Remove cover switch handling to allow adding multislot support MMC: OMAP: Fix the BYTEBLOCK capability removal ...
-
