- 14 Jun, 2022 3 commits
-
-
Jakub Kicinski authored
Add missing documentation for the TLS_TX_ZEROCOPY_RO opt-in. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220610180212.110590-1-kuba@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Marco Bonelli authored
Fix the implementation of ethtool_convert_link_mode_to_legacy_u32(), which is supposed to return false if src has bits higher than 31 set. The current implementation uses the complement of bitmap_fill(ext, 32) to test high bits of src, which is wrong as bitmap_fill() fills _with long granularity_, and sizeof(long) can be > 4. No users of this function currently check the return value, so the bug was dormant. Also remove the check for __ETHTOOL_LINK_MODE_MASK_NBITS > 32, as the enum ethtool_link_mode_bit_indices contains far beyond 32 values. Using find_next_bit() to test the src bitmask works regardless of this anyway. Signed-off-by:
Marco Bonelli <marco@mebeim.net> Link: https://lore.kernel.org/r/20220609134900.11201-1-marco@mebeim.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Rasmus Villemoes authored
There's no point probing for phys on this artificial bus, so we can save a little bit of boot time by telling mdiobus_register() not to do that. This doesn't have any functional change, since, at this point, fixed_mdio_read() returns 0xffff for all addresses/registers, so mdiobus_scan() -> get_phy_device() -> get_phy_c22_id() will return -ENODEV, which is just ignored. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220606200208.1665417-1-linux@rasmusvillemoes.dkSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 13 Jun, 2022 11 commits
-
-
Yajun Deng authored
__sys_accept4_file() isn't used outside of the file, make it static. As the same time, move file_flags and nofile parameters into __sys_accept4_file(). Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
sk_memory_allocated_add() has three callers, and returns to them @memory_allocated. sk_forced_mem_schedule() is one of them, and ignores the returned value. Change sk_memory_allocated_add() to return void. Change sock_reserve_memory() and __sk_mem_raise_allocated() to call sk_memory_allocated(). This removes one cache line miss [1] for RPC workloads, as first skbs in TCP write queue and receive queue go through sk_forced_mem_schedule(). [1] Cache line holding tcp_memory_allocated. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parthiban Veerasooran authored
This patch adds support for Microchip's EVB-LAN8670-USB 10BASE-T1S ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pairs. Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yinjun Zhang authored
48-bit DMA addressing is supported in NFP3800 HW and implemented in NFDK firmware, so enable this feature in driver now. Note that with this change, NFD3 firmware, which doesn't implement 48-bit DMA, cannot be used for NFP3800 any more. RX free list descriptor, used by both NFD3 and NFDK, is also modified to support 48-bit DMA. That's OK because the top bits is always get set to 0 when assigned with 40-bit address. Based on initial work of Jakub Kicinski <jakub.kicinski@netronome.com>. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: simple refactoring This series contains some minor code improvements. The first patch verifies that the configuration is compatible with a recently-defined limit. The second and third rename two fields so they better reflect their use in the code. The next gets rid of an empty function by reworking its only caller. The last two begin to remove the assumption that an event ring is associated with a single channel. Eventually we'll support having multiple channels share an event ring but some more needs to be done before that can happen. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
In gsi_channel_tx_queued(), we report when a transaction gets passed to hardware. Change that function so it takes transaction rather than a channel as its argument, and derive the channel from the transaction. Rename the function accordingly. Delete the header comments above the function definition; the ones above the declaration in "gsi_private.h" should suffice. In addition, the comments above gsi_channel_tx_update() do a fine job of explaining what's going on. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Each event in an event ring describes the TRE whose completion caused the event. Currently, every event ring is dedicated to a single channel, so the channel is easily derived from the event ring. An event ring can actually be shared by more than one channel though, and to distinguish events for one channel from another, the event structure contains a field indicating which channel the event is associated with. In gsi_event_trans(), use the channel ID in an event to determine which channel the event is for. This makes the channel pointer now passed to that function irrelevant; pass the GSI pointer to that function instead. And although it shouldn't happen, warn if an event arrives that records a channel ID that's not in use, or if the event does not have a transaction associated with it. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
When a GSI transaction completes, ipa_endpoint_trans_complete() is eventually called. That handles TX and RX completions separately, but ipa_endpoint_tx_complete() is a no-op. Instead, have ipa_endpoint_trans_complete() return immediately for a TX transaction, and incorporate code from ipa_endpoint_rx_complete() to handle RX transactions. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
The trans_tre_max field of the IPA endpoint structure is only used to limit the number of fragments allowed for an SKB being prepared for transmission. Recognizing that, rename the field skb_frag_max, and reduce its value by 1. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Each GSI channel has a TLV FIFO of a certain size, specified in the configuration data for an AP channel. That size dictates the maximum number of TREs that are allowed in a single transaction. The only way that value is used after initialization is as a limit on the number of TREs in a transaction; calling it "tlv_count" isn't helpful, and in fact gsi_channel_trans_tre_max() exists to sort of abstract it. Instead, rename the channel->tlv_count field trans_tre_max, and get rid of the helper function. Update a couple of comments as well. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
In commit 8797972a ("net: ipa: remove command info pool"), the maximum number of IPA commands that would be sent in a single transaction was defined. That number can't exceed the size of the TLV FIFO on the command channel, and we can check that at runtime. To add this check, pass a new flag to gsi_channel_data_valid() to indicate the channel being checked is being used for IPA commands. Knowing that we can also verify the channel direction is correct. Use a new local variable that refers to the command-specific portion of the data being checked. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Jun, 2022 3 commits
-
-
Yinjun Zhang authored
Previously the traffic class field is ignored while firmware has already supported to pedit flowinfo fields, including traffic class and flow label, now add it back. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Link: https://lore.kernel.org/r/20220609080136.151830-1-simon.horman@corigine.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Bin Chen authored
The commit a14857c2 ("rtnetlink: verify rate parameters for calls to ndo_set_vf_rate") has been merged to master, so we can to remove the now-duplicate checks in drivers. Signed-off-by:
Bin Chen <bin.chen@corigine.com> Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220609084717.155154-1-simon.horman@corigine.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-06-09 Maximilian Heyne adds reporting of VF statistics on ixgbe via iproute2 interface. Kai-Heng Feng removes duplicate defines from igb. Jiaqing Zhao fixes typos in e1000, ixgb, and ixgbe drivers. Julia Lawall fixes typos for fm10k, ixgbe, and ice drivers. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: drivers/net/ethernet/intel: fix typos in comments ixgbe: Fix typos in comments ixgb: Fix typos in comments e1000: Fix typos in comments igb: Remove duplicate defines drivers, ixgbe: export vf statistics ==================== Link: https://lore.kernel.org/r/20220609171257.2727150-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 10 Jun, 2022 23 commits
-
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: reduce tcp_memory_allocated inflation Hosts with a lot of sockets tend to hit so called TCP memory pressure, leading to very bad TCP performance and/or OOM. The problem is that some TCP sockets can hold up to 2MB of 'forward allocations' in their per-socket cache (sk->sk_forward_alloc), and there is no mechanism to make them relinquish their share under mem pressure. Only under some potentially rare events their share is reclaimed, one socket at a time. In this series, I implemented a per-cpu cache instead of a per-socket one. Each CPU has a +1/-1 MB (256 pages on x86) forward alloc cache, in order to not dirty tcp_memory_allocated shared cache line too often. We keep sk->sk_forward_alloc values as small as possible, to meet memcg page granularity constraint. Note that memcg already has a per-cpu cache, although MEMCG_CHARGE_BATCH is defined to 32 pages, which seems a bit small. Note that while this cover letter mentions TCP, this work is generic and supports TCP, UDP, DECNET, SCTP. ==================== Link: https://lore.kernel.org/r/20220609063412.2205738-1-eric.dumazet@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
These two helpers are only used from core networking. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Currently, tcp_memory_allocated can hit tcp_mem[] limits quite fast. Each TCP socket can forward allocate up to 2 MB of memory, even after flow became less active. 10,000 sockets can have reserved 20 GB of memory, and we have no shrinker in place to reclaim that. Instead of trying to reclaim the extra allocations in some places, just keep sk->sk_forward_alloc values as small as possible. This should not impact performance too much now we have per-cpu reserves: Changes to tcp_memory_allocated should not be too frequent. For sockets not using SO_RESERVE_MEM: - idle sockets (no packets in tx/rx queues) have zero forward alloc. - non idle sockets have a forward alloc smaller than one page. Note: - Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD is left to MPTCP maintainers as a follow up. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes, we want to allocate 1 byte more (rounded up to one page), instead of 150001 :/ Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
We plan keeping sk->sk_forward_alloc as small as possible in future patches. This means we are going to call sk_memory_allocated_add() and sk_memory_allocated_sub() more often. Implement a per-cpu cache of +1/-1 MB, to reduce number of changes to sk->sk_prot->memory_allocated, which would otherwise be cause of false sharing. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Each protocol having a ->memory_allocated pointer gets a corresponding per-cpu reserve, that following patches will use. Instead of having reserved bytes per socket, we want to have per-cpu reserves. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Due to memcg interface, SK_MEM_QUANTUM is effectively PAGE_SIZE. This might change in the future, but it seems better to avoid the confusion. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
This reverts commit bd68a2a8. This change broke memcg on arches with PAGE_SIZE != 4096 Later, commit 2bb2f5fb ("net: add new socket option SO_RESERVE_MEM") also assumed PAGE_SIZE==SK_MEM_QUANTUM Following patches in the series will greatly reduce the over allocations problem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull more devicetree fixes from Rob Herring: - More DT meta-schema check fixes from new bindings in merge window - Fix stale DT binding references from Mauro - Update various binding maintainers - Fix in arm,malidp properties to match reality - Add deprecated 'atheros' vendor prefix * tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: arm,malidp: remove bogus RQOS property dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart' MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion MAINTAINERS: update snps,axs10x-reset.yaml reference MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference MAINTAINERS: update cortina,gemini-ethernet.yaml reference dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference dt-bindings: reset: update st,stih407-powerdown.yaml references dt-bindings: arm: update vexpress-config.yaml references dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference dt-bindings: update Luca Ceresoli's e-mail address dt-bindings: msm: update maintainers list with proper id dt-bindings: vendor-prefixes: document deprecated Atheros dt-bindings: Update QCOM USB subsystem maintainer information
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix an intel_idle issue introduced during the 5.16 development cycle and two recent regressions in the system reboot/poweroff code. Specifics: - Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra) - Allow all platforms to use the global poweroff handler and make non-syscall poweroff code paths work again (Dmitry Osipenko)" * tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE kernel/reboot: Fix powering off using a non-syscall code paths kernel/reboot: Use static handler for register_platform_power_off()
-
David Howells authored
There's a rule in certs/Makefile for which the command begins with eight spaces. This results in: ../certs/Makefile:21: FORCE prerequisite is missing ../certs/Makefile:21: *** missing separator. Stop. Fix this by turning the spaces into a tab. Fixes: addf4663 ("certs: Check that builtin blacklist hashes are valid") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by:
Mickaël Salaün <mic@linux.microsoft.com> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/486b1b80-9932-aab6-138d-434c541c934a@digikod.net/ # v1 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andre Przywara authored
As Liviu pointed out, the arm,malidp-arqos-high-level property mentioned in the original .txt binding was a mistake, and arm,malidp-arqos-value needs to take its place. The binding commit ce6eb025 ("dt/bindings: display: Add optional property node define for Mali DP500") mentions the right name in the commit message, but has the wrong name in the diff. Commit d298e6a2 ("drm/arm/mali-dp: Add display QoS interface configuration for Mali DP500") uses the property in the driver, but uses the shorter name. Remove the wrong property from the binding, and use the proper name in the example. The actual property was already documented properly. Fixes: 2c8b082a ("dt-bindings: display: convert Arm Mali-DP to DT schema") Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reported-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com
-
Rafael J. Wysocki authored
Merge fixes for regressions introduced by the recent rework of the system reboot/poweroff code. * pm-sysoff: kernel/reboot: Fix powering off using a non-syscall code paths kernel/reboot: Use static handler for register_platform_power_off()
-
Rob Herring authored
There's no reason to list the same value twice in an 'enum'. This was fixed treewide in commit c3b00681 ("dt-bindings: Fix 'enum' lists with duplicate entries"), but this one got added in the merge window. A meta-schema change will catch future cases. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20220606212239.1360877-1-robh@kernel.org
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A few documentation fixes for 5.19, including moving the new HTE docs to a more suitable location, adding loongarch to the features lists, and a couple of typo fixes" * tag 'docs-5.19-3' of git://git.lwn.net/linux: docs: arm: tcm: Fix typo in description of TCM and MMU usage docs: Move the HTE documentation to driver-api/ docs: usb: fix literal block marker in usbmon verification example Documentation/features: Update the arch support status files
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - SME save/restore for EFI fix - incorrect logic for detecting the need for saving/restoring the FFR state. - SME fix for a CPU ID field value. - Sysreg generation awk script fix (comparison operator). - Some typos in documentation or comments and silence a sparse warning (missing prototype). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add kasan_hw_tags_enable() prototype to silence sparse arm64/sme: Fix EFI save/restore arm64/fpsimd: Fix typo in comment arm64/sysreg: Fix typo in Enum element regex arm64/sme: Fix SVE/SME typo in ABI documentation arm64/sme: Fix tests for 0b1111 value ID registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fixes from Damien Le Moal: - Fix handling of the explicit-open mount option, and in particular the conditions under which this option can be ignored. - Fix a problem with zonefs iomap_begin method, causing a hang in iomap_readahead() when a readahead request reaches the end of a file. * tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix zonefs_iomap_begin() for reads zonefs: Do not ignore explicit_open with active zone limit zonefs: fix handling of explicit_open option on mount
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fixes from Damien Le Moal: "Several small fixes for rc2: - Remove unused field in struct ata_port (Hannes) - Fix a potential (very unlikely) NULL pointer dereference in ata_host_alloc_pinfo() (Sergey) - Fix a device reference leak in the pata_octeon_cf driver (Miaoqian) - Fixes for handling access to the concurrent positioning ranges log page used with multi-actuator HDDs (Tyler) - Fix the values shown by the pio_mode and dma_mode sysfs device attributes (Sergey) - Update the MAINTAINERS file to add libata sysfs ABI documentation file (Sergey)" * tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: MAINTAINERS: add ATA sysfs file documentation to libata entry ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files libata: fix translation of concurrent positioning ranges libata: fix reading concurrent positioning ranges log ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() ata: libata: drop 'sas_last_tag'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of fixes; almost all changes are device-specific small fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage, so far" * tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek: Add quirk for HP Dev One ALSA: hda/realtek - Add HW8326 support ALSA: hda/conexant - Fix loopback issue with CX20632 ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID ALSA: usb-audio: Set up (implicit) sync for Saffire 6 ALSA: usb-audio: Skip generic sync EP parse for secondary EP ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put() ASoC: es8328: Fix event generation for deemphasis control ASoC: wm8962: Fix suspend while playing music ASoC: SOF: ipc-msg-injector: Fix reversed if statement ASoC: SOF: ipc-msg-injector: Propagate write errors correctly ASoC: fsl_sai: Add support for i.MX8MN ASoC: SOF: Fix potential NULL pointer dereference ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021 ASoC: cs42l51: Correct minimum value for SX volume control ASoC: cs42l56: Correct typo in minimum level for SX volume controls ASoC: cs42l52: Correct TLV for Bypass Volume ASoC: cs53l30: Correct number of volume levels on SX controls ASoC: cs35l36: Update digital volume TLV ASoC: cs42l52: Fix TLV scales for mixer controls ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and then some misc panfrost, bridge/panel ones, and one ast fix for multi-monitors. Probably pick up a bit more next week like rc3 often does. amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix panfrost: - fix a use after free ti-sn65dsi83: - fix invalid DT configuration panel: - two self refresh fixes ast: - multiple output fix" * tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/ast: Support multiple outputs drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs. drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit drm/amdgpu: always flush the TLB on gfx8 drm/amdgpu: fix limiting AV1 to the first instance on VCN3 drm/amdkfd:Fix fw version for 10.3.6 drm/amdgpu: Add MODE register to wave debug info in gfx11 Revert "drm/amd/display: Pass the new context into disable OTG WA" Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups" drm/atomic: Force bridge self-refresh-exit on CRTC switch drm/bridge: analogix_dp: Support PSR-exit to disable transition drm/amdgpu: suppress the compile warning about 64 bit type drm/amd/pm: suppress compile warnings about possible unaligned accesses drm/amdkfd: Fix partial migration bugs drm/amdkfd: add pinned BOs to kfd_bo_list drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved drm/amdgpu: enable tmz by default for GC 10.3.7 drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions drm/amdkfd: Use mmget_not_zero in MMU notifier drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Quick follow up, to cleanly fast-forward net again. Current release - new code bugs: - Revert "net/mlx5e: Allow relaxed ordering over VFs" Previous releases - regressions: - seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev Misc: - rename TLS_INFO_ZC_SENDFILE to better express the meaning" * tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev nfp: flower: restructure flow-key for gre+vlan combination nfp: avoid unnecessary check warnings in nfp_app_get_vf_config tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX net/mlx5: fs, fail conflicting actions net/mlx5: Rearm the FW tracer after each tracer event net/mlx5: E-Switch, pair only capable devices net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules Revert "net/mlx5e: Allow relaxed ordering over VFs" MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
-
Catalin Marinas authored
This function is only called from assembly, no need for a prototype declaration in a header file. In addition, add #ifdef around the function since it is only used when CONFIG_KASAN_HW_TAGS. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
kernel test robot <lkp@intel.com>
-