- 19 Sep, 2009 40 commits
-
-
Jiri Slaby authored
Stanse found a tty refcnt leak on one fail path in rc_transmit. Fix that by jumping to the 'out' label. http://stanse.fi.muni.cz/Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Slaby authored
tty_port_ops.shutdown takes only one parameter: tty port. Remove the second one and use port->tty where needed instead. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Stern authored
This patch (as1282) fixes some obvious typos in the TTY core. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Jiri Slaby authored
vt_waitactive no longer accepts console parameter as console-1 since commit "vt: add an event interface". It expects console number directly (as viewed by userspace -- counting from 1). Fix a deadlock suspend regression by redefining adding one to vt in vt_move_to_console. Signed-off-by:
-
Marcin Slusarz authored
Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The VT specific compat_ioctl handlers are the only ones in common code that require the BKL. Moving them into the vt driver lets us remove the BKL from the other handlers and cleans up the code. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Joe Peterson authored
Check L_ECHOCTL before insertting a character in the echo buffer (rather than as the buffer is processed), to be more consistent with when all other L_ flags are checked. Also cleaned up the related logic. Note that this and the previous patch ("n_tty: honor opost flag for echoes") were verified together by the reporters of the bug that patch addresses (http://bugs.linuxbase.org/show_bug.cgi?id=2692), and the test now passes. Signed-off-by:Joe Peterson <joe@skyrush.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Joe Peterson authored
Fixes the following bug: http://bugs.linuxbase.org/show_bug.cgi?id=2692 Causes processing of echoed characters (output from the echo buffer) to honor the O_OPOST flag, which is consistent with the old behavior. Note that this and the next patch ("n_tty: move echoctl check and clean up logic") were verified together by the bug reporters, and the test now passes. Signed-off-by: -
Alan Cox authored
Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Deepak Saxena authored
Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC XO laptop. Basically what happens is that upon returning from resume, serial8250_resume_port() will reconfigure the port for high speed mode and all console output will be garbled, making debug of the resume path painful. This patch modifies uart_resume_port() to reset the port to the state it was in before we suspended. Original patch by Marcelo Tosatti Second patch by Deepak then reworked by Alan to fit with the tty changes before it got submitted. Also fixed the console path to set c_i/ospeed as some drivers require the termios fields are valid Signed-off-by:
Deepak Saxena <dsaxena@laptop.org> Signed-off-by:
-
Alan Cox authored
Initially just use the helper and thus krefs when we set and clear the port values. Signed-off-by: -
Alan Cox authored
The serial layer for some reason uses different defines for the special case close delays and then conditionally switches to/from the normal ones in the ioctls. Remove this rather pointless abstraction Signed-off-by:
-
Alan Cox authored
This little helper is now tty_port specific and useful generally so move it Signed-off-by:
-
Alan Cox authored
This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: -
Alan Cox authored
They cover essentially the same stuff and we can therefore fold it into the tty_port one. Signed-off-by:
-
Alan Cox authored
This typedef is now extinct Signed-off-by:
-
Alan Cox authored
Fortunately the serial layer was designed to use the same flag values but with different names. It has its own SUSPENDED flag which is a free slot in the ASYNC flags so we allocate it in the ASYNC flags instead. Signed-off-by:
-
Alan Cox authored
Remove more stuff from the serial special case code Signed-off-by:
-
Alan Cox authored
Extract out a lot of the x.port. uses and also show up where there are things left to be isolated that prevent use using the port helpers in the serial layer at this point Signed-off-by: -
Alan Cox authored
Remove some more serial specific use Signed-off-by:
-
Alan Cox authored
We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by:
-
Alan Cox authored
Again moving towards being able to add a common open method Signed-off-by: -
Alan Cox authored
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by:
-
Alan Cox authored
X and other graphical interfaces need to be able to flip to a console and lock it into graphics mode without races. Signed-off-by:
-
Alan Cox authored
We have vt_kern.h for this Signed-off-by:
-
Alan Cox authored
In the past someone gratuitiously borrowed chunks of kernel internal vt code and dumped them in kernel/power. They have all sorts of deep relations with the vt code so put them in the vt tree instead Signed-off-by:
-
Alan Cox authored
This is needed and requested in various forms for ConsoleKit, screenblank handling and the like so do the job with a single interface. Also build the interface so that unlike VT_WAITACTIVE and friends it won't miss events. FIXME: Should this be a waitactive ioctl or a new device file you can poll and read events from. We need the code anyway to fix up the existing broken wait for console switch logic but the ConsoleKit people would prefer the new device to the ioctl we have here Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
These are handled by the tty_port core code which will raise and lower the carrier correctly in tty_wait_until_ready Signed-off-by:
-
Alan Cox authored
The USB layer uses tty_hangup to deal with unplugs of the physical hardware (analogous to loss of carrier) and then frees the resources. However the tty_hangup is asynchronous. As the hangup can sleep we can use tty_vhangup which is the non async version to avoid freeing resources too early. Signed-off-by:
-
Alan Cox authored
This changed in 2006 so its about time the ACM driver caught up Signed-off-by:
-
Alan Cox authored
We want to be able to sleep in the destructor for USB at least. It isn't a hot path so just pushing it to a work queue doesn't really cause any difficulty. Signed-off-by:
-
Alan Cox authored
Convert cyclades to use the full tty_port_close helper Signed-off-by:
-
Alan Cox authored
We need to kref this driver in order to use port_close Signed-off-by:
-
Alan Cox authored
Start to extract and build a model for a common tty_port_close() Signed-off-by: -
Alan Cox authored
Prepare for the tty_port_close function by splitting out methods Signed-off-by: -
Alan Cox authored
Moving towards a tty_port method for open/close Signed-off-by:
-
Alan Cox authored
Now we are extracting out methods for shutdown and the like we can add a proper tty_port_close method that knows all the innards of the tty closing process and hides the lot from the caller. At some point in the future this will be paired with a similar open() helper and the drivers can stick to hardware management. Signed-off-by:
-
Anton Vorontsov authored
A platform clock drives 8250 ports in most SOC systems, the clock might run at high frequencies, and so it's not always possible to downscale uart clock to a desired value. Currently the 8250 uart driver accepts not supported baud rates, and what is worse, it is doing this silently, and then passes not accepted values to a new termios, so userspace has no chance to catch this kind of errors (userspace verifies that settings were accepted by reading back and comparing the settings). This patch fixes the issue by passing minimum baud rate to the uart_get_baud_rate() call, the call should take care of all bounds, so userspace should now report: # stty -F /dev/ttyS0 speed 300 115200 stty: /dev/ttyS0: unable to perform all requested operations p.s. uart_get_baud_rate() falls back to 9600, which still might be too low for some 10 GHz platforms, but that's a separate issue, and we can wait with fixing this till we find such a platform. Signed-off-by:Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Vikram Pandita authored
There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs) This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver Changes are backward compatible with boards passing UPF_SHARE_IRQ flag Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq [Moved new flag to end to fix bugs in the original with the old_serial array -- Alan] Signed-off-by:
Vikram Pandita <vikram.pandita@ti.com> Signed-off-by:
-
