- 07 Aug, 2014 40 commits
-
-
Joe Perches authored
Add a --strict test asking for a blank line after function/struct/union/enum declarations. Allow exceptions for several attributes and macro uses. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
This might help a kernel hacker think twice before blindly adding a newline. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
-
Joe Perches authored
There are some patches created by git format-patch that when scanned by checkpatch report errors on lines like To: address.tld This is a checkpatch false positive. Improve the logic a bit to ignore folded email headers to avoid emitting these messages. Signed-off-by:
-
Joe Perches authored
Add a function pointer declaration check to the test for blank line needed after declarations. Signed-off-by:
Bruce W Allan <bruce.w.allan@intel.com> Signed-off-by:
-
Joe Perches authored
A single escaped constant char is not a complex macro. Signed-off-by:
-
Joe Perches authored
Using an else following a break or return can unnecessarily indent code blocks. ie: for (i = 0; i < 100; i++) { int foo = bar(); if (foo < 1) break; else usleep(1); } is generally better written as: for (i = 0; i < 100; i++) { int foo = bar(); if (foo < 1) break; usleep(1); } Warn when a bare else statement is preceded by a break or return indented 1 tab more than the else. Signed-off-by: -
Joe Perches authored
Logging messages that show some type of "out of memory" error are generally unnecessary as there is a generic message and a stack dump done by the memory subsystem. These messages generally increase kernel size without much added value. Emit a warning on these types of messages. This test looks for any inserted message function, then looks at the previous line for an "if (!foo)" or "if (foo == NULL)" test and then looks at the preceding statement for an allocation function like "foo = kmalloc()" ie: this code matches: foo = kmalloc(); if (foo == NULL) { printk("Out of memory\n"); return -ENOMEM; } This test is very crude and incomplete. This test can miss quite a lot of of OOM messages that do not have this specific form. ie: this code does not match: foo = kmalloc(); if (!foo) { rtn = -ENOMEM; printk("Out of memory!\n"); goto out; } This test could also be a false positive when the logging message itself does not specify anything about memory, but I did not find any false positives in my limited testing. spatch could be a better solution but correctness seems non-trivial for that tool too. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Rasmus Villemoes authored
Apparently, bitmap_andnot is supposed to return whether the new bitmap is empty. But it didn't take potential garbage bits in the last word into account. Signed-off-by:
-
Rasmus Villemoes authored
Apparently, bitmap_and is supposed to return whether the new bitmap is empty. But it didn't take potential garbage bits in the last word into account. Signed-off-by:
-
Rasmus Villemoes authored
There is no guarantee that *src does not contain garbage bits outside the lower nbits, so we need to mask it before the shift-and-assign. Signed-off-by:
-
Rasmus Villemoes authored
__reg_op(..., REG_OP_ALLOC) always returns 0, so we might as well use that and save an instruction. Signed-off-by:
-
Rasmus Villemoes authored
Changing the pos parameter of __reg_op to unsigned allows the compiler to generate slightly smaller and simpler code. Also update its callers bitmap_*_region to receive and pass unsigned int. The return types of bitmap_find_free_region and bitmap_allocate_region are still int to allow a negative error code to be returned. An int is certainly capable of representing any realistic return value. Signed-off-by:
-
Rasmus Villemoes authored
A few lines above, it was stated that positions for non-set bits are mapped to -1, which is obviously also what the code does. Signed-off-by:
-
Rasmus Villemoes authored
We want len to be the index of the first '\n', or the length of the string if there is no newline. This is a good example of the usefulness of strchrnul(). Use that instead, thus eliminating a branch and a call to strlen(). Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "start" is non-negative. Also, use the names "start" and "len" for the two parameters for consistency with bitmap_set. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "start" is non-negative. Also, use the names "start" and "len" for the two parameters in both header file and implementation, instead of the previous mix. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. I didn't change the return type, since that might change the semantics of some expression containing a call to bitmap_weight(). Certainly an int is capable of holding the result. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by:
-
Rasmus Villemoes authored
This change is only for consistency with the changes to the other bitmap_* functions; it doesn't change the size of the generated code: inside BITS_TO_LONGS there is a sizeof(long), which causes bits to be interpreted as unsigned anyway. Signed-off-by:
-
Rasmus Villemoes authored
Since the extra bits are "don't care", there is no reason to mask the last word to the used bits when complementing. This shaves off yet a few bytes. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by:
-
Rasmus Villemoes authored
The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by:
-
Rasmus Villemoes authored
Many functions in lib/bitmap.c start with an expression such as lim = bits/BITS_PER_LONG. Since bits has type (signed) int, and since gcc cannot know that it is in fact non-negative, it generates worse code than it could. These patches, mostly consisting of changing various parameters to unsigned, gives a slight overall code reduction: add/remove: 1/1 grow/shrink: 8/16 up/down: 251/-414 (-163) function old new delta tick_device_uses_broadcast 335 425 +90 __irq_alloc_descs 498 554 +56 __bitmap_andnot 73 115 +42 __bitmap_and 70 101 +31 bitmap_weight - 11 +11 copy_hugetlb_page_range 752 762 +10 follow_hugetlb_page 846 854 +8 hugetlb_init 1415 1417 +2 hugetlb_nrpages_setup 130 131 +1 hugetlb_add_hstate 377 376 -1 bitmap_allocate_region 82 80 -2 select_task_rq_fair 2202 2191 -11 hweight_long 66 55 -11 __reg_op 230 219 -11 dm_stats_message 2849 2833 -16 bitmap_parselist 92 74 -18 __bitmap_weight 115 97 -18 __bitmap_subset 153 129 -24 __bitmap_full 128 104 -24 __bitmap_empty 120 96 -24 bitmap_set 179 149 -30 bitmap_clear 185 155 -30 __bitmap_equal 136 105 -31 __bitmap_intersects 148 108 -40 __bitmap_complement 109 67 -42 tick_device_setup_broadcast_func.isra 81 - -81 [The increases in __bitmap_and{,not} are due to bug fixes 17/18,18/18. No idea why bitmap_weight suddenly appears.] While 163 bytes treewide is insignificant, I believe the bitmap functions are often called with locks held, so saving even a few cycles might be worth it. While making these changes, I found a few other things that might be worth including. 16,17,18 are actual bug fixes. The rest shouldn't change the behaviour of any of the functions, provided no-one passed negative nbits values. If something should come up, it should be fairly bisectable. A few issues I thought about, but didn't know what to do with: * Many of the functions misbehave if nbits is compile-time 0; the out-of-line functions generally handle 0 correctly. bitmap_fill() is particularly bad, whether the 0 is known at compile time or not. It would probably be nice to add detection of at least compile-time 0 and handle that appropriately. * I didn't change __bitmap_shift_{left,right} to use unsigned because I want to fully understand why the algorithm works before making that change. However, AFAICT, they behave correctly for all (positive) shift amounts. This is not the case for the small_const_nbits versions. If for example nbits = n = BITS_PER_LONG, the shift operators turn into no-ops (at least on x86), so one get *dst = *src, whereas one would expect to get *dst=0. That difference in behaviour is somewhat annoying. This patch (of 18): The compiler can generate slightly smaller and simpler code when it knows that "nbits" is non-negative. Since no-one passes a negative bit-count, this shouldn't affect the semantics. Signed-off-by: -
Andrew Morton authored
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Don Mullis <don.mullis@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Rasmus Villemoes authored
The helper merge_and_restore_back_links() makes sure to call the caller's cmp function during the final ->prev pointer fixup, so that the cmp function may call cond_resched(). However, if the cmp function does not call cond_resched() at all, this is entirely redundant. If it does, doing at least two function calls for every two pointer assignments is a bit excessive. This patch limits the calls to once for every 256 iterations. Signed-off-by:
-
Rasmus Villemoes authored
There is no reason to maintain the list structure while freeing the debug elements. Aside from the redundant pointer manipulations, it is also inefficient from a locality-of-reference viewpoint, since they are visited in a random order (wrt. the order they were allocated). Furthermore, if we jumped to exit: after detecting list corruption, it is actually dangerous. So just free the elements in the order they were allocated, using the backing array elts. Allocate that using kcalloc(), so that if allocation of one of the debug element fails, we just end up calling kfree(NULL) for the trailing elements. Minor details: Use sizeof(*elts) instead of sizeof(void *), and return err immediately when allocation of elts fails, to avoid introducing another label just before the final return statement. Signed-off-by:
-
Rasmus Villemoes authored
Add a check to make sure that the prev pointer of the list head points to the last element on the list. Signed-off-by:
-
Rasmus Villemoes authored
Signed-off-by:
-
Joe Perches authored
It's been nearly 3 years now since commit 55036ba7 ("lib: rename pack_hex_byte() to hex_byte_pack()") so it's time to remove this deprecated and unused static inline. Signed-off-by:
-
Fabian Frederick authored
Use kernel.h definition. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Mathias Krause authored
Complement commit 68aecfb9 ("lib/string_helpers.c: make arrays static") by making the arrays const -- not only pointing to const strings. This moves them out of the data section to the r/o data section: text data bss dec hex filename 1150 176 0 1326 52e lib/string_helpers.old.o 1326 0 0 1326 52e lib/string_helpers.new.o Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Gui Hecheng authored
For modern filesystems such as btrfs, t/p/e size level operations are common. add size unit t/p/e parsing to memparse Signed-off-by:
Gui Hecheng <guihc.fnst@cn.fujitsu.com> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by:
-
George Spelvin authored
The function may be useful for other drivers, so export it. (Suggested by Tejun Heo.) Note that I inverted the return value of glob_match; returning true on match seemed to make more sense. Signed-off-by:
George Spelvin <linux@horizon.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
George Spelvin authored
This was useful during development, and is retained for future regression testing. GCC appears to have no way to place string literals in a particular section; adding __initconst to a char pointer leaves the string itself in the default string section, where it will not be thrown away after module load. Thus all string constants are kept in explicitly declared and named arrays. Sorry this makes printk a bit harder to read. At least the tests are more compact. Signed-off-by:
-
George Spelvin authored
This is a helper function from drivers/ata/libata_core.c, where it is used to blacklist particular device models. It's being moved to lib/ so other drivers may use it for the same purpose. This implementation in non-recursive, so is safe for the kernel stack. [akpm@linux-foundation.org: fix sparse warning] Signed-off-by:
-
Sergey Senozhatsky authored
Cleanup unused `if 0'-ed functions, which have been dead since 2006 (commits 87c2ce3b ("lib/zlib*: cleanups") by Adrian Bunk and 4f3865fb ("zlib_inflate: Upgrade library code to a recent version") by Richard Purdie): - zlib_deflateSetDictionary - zlib_deflateParams - zlib_deflateCopy - zlib_inflateSync - zlib_syncsearch - zlib_inflateSetDictionary - zlib_inflatePrime Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Ken Helias authored
The name was modified from hlist_add_after() to hlist_add_behind() when adjusting the order of arguments to match the one with klist_add_after(). This is necessary to break old code when it would use it the wrong way. Make klist follow this naming scheme for consistency. Signed-off-by:
Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Ken Helias authored
All other add functions for lists have the new item as first argument and the position where it is added as second argument. This was changed for no good reason in this function and makes using it unnecessary confusing. The name was changed to hlist_add_behind() to cause unconverted code to generate a compile error instead of using the wrong parameter order. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
