- 03 Sep, 2024 26 commits
-
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2024-09-01 Simon Horman catched two typos in our headers. No functional change. * tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: ieee802154: Correct spelling in nl802154.h mac802154: Correct spelling in mac802154.h ==================== Link: https://patch.msgid.link/20240901184213.2303047-1-stefan@datenfreihafen.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Justin Iurman authored
This patch improves two checks on user data. The first one prevents bit 23 from being set, as specified by RFC 9197 (Sec 4.4.1): Bit 23 Reserved; MUST be set to zero upon transmission and be ignored upon receipt. This bit is reserved to allow for future extensions of the IOAM Trace-Type bit field. The second one checks that the tunnel destination address != IPV6_ADDR_ANY, just like we already do for the tunnel source address. Signed-off-by:Justin Iurman <justin.iurman@uliege.be> Link: https://patch.msgid.link/20240830191919.51439-1-justin.iurman@uliege.beSigned-off-by:
-
Paolo Abeni authored
Yue Haibing says: ==================== cleanup chelsio driver declarations v2: correct patch 3 commit citation ==================== Link: https://patch.msgid.link/20240830093338.3742315-1-yuehaibing@huawei.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Yue Haibing authored
These functions were never implenmented since introduction in commit 8199d3a7 ("[PATCH] A new 10GB Ethernet Driver by Chelsio Communications") Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Yue Haibing authored
Commit e2d14b42 ("cxgb4: Remove WOL get/set ethtool support") removed t4_wol_magic_enable() and t4_wol_pat_enable() but leave declarations. Commit 02d805dc ("cxgb4: use new fw interface to get the VIN and smt index") leave behind cxgb4_tp_smt_idx(). cxgb4_dcb_set_caps() is never implemented and used since introduction in commit 76bcb31e ("cxgb4 : Add DCBx support codebase and dcbnl_ops"). Reviewed-by:
-
Yue Haibing authored
Commit 4d22de3e ("Add support for the latest 1G/10G Chelsio adapter, T3.") declared but never implemented these. Reviewed-by:
-
Florian Westphal authored
The sctp selftest is very slow on debug kernels. Its possible that the nf_queue listener program exits due to timeout before first sctp packet is processed. In this case socat hangs until script times out. Fix this by removing the -t option where possible and kill the test program once the file transfer/socat has exited. -t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest where we want to make sure that packets get reinjected properly without skipping a second queue request. While at it, add a helper to compare the (binary) files instead of diff. The 'diff' part was copied from a another sub-test that compares text. Let helper dump file sizes on error so we can see the progress made. Tested on an old 2010-ish box with a debug kernel and 100 iterations. This is a followup to the earlier filesize reduction change. Reported-by:
Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.deSigned-off-by:
-
Paolo Abeni authored
Jinjie Ruan says: ==================== net: Simplified with scoped function Simplify with scoped for each OF child loop, as well as dev_err_probe(). Changes in v4: - Drop the fix patch and __free() patch. - Rebased on the fix patch has been stripped out. - Remove the extra parentheses. - Ensure Signed-off-by: should always be last. - Add Reviewed-by. - Update the cover letter commit message. Changes in v3: - Sort the variables, longest first, shortest last. - Add Reviewed-by. Changes in v2: - Subject prefix: next -> net-next. - Split __free() from scoped for each OF child loop clean. - Fix use of_node_put() instead of __free() for the 5th patch. ==================== Link: https://patch.msgid.link/20240830031325.2406672-1-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Justin Chen <justin.chen@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by:
-
Jinjie Ruan authored
Avoids the need for manual cleanup of_node_put() in early exits from the loop by using for_each_available_child_of_node_scoped(). Reviewed-by:
-
Jinjie Ruan authored
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by:
-
Jinjie Ruan authored
Use the dev_err_probe() helper to simplify code. Reviewed-by:
-
Jinjie Ruan authored
Avoids the need for manual cleanup of_node_put() in early exits from the loop by using for_each_available_child_of_node_scoped(). Reviewed-by:
-
Jinjie Ruan authored
Avoid need to manually handle of_node_put() by using for_each_available_child_of_node_scoped(), which can simplfy code. Reviewed-by:
-
Jinjie Ruan authored
Avoid need to manually handle of_node_put() by using for_each_child_of_node_scoped(), which can simplfy code. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Jinjie Ruan authored
Avoid need to manually handle of_node_put() by using for_each_child_of_node_scoped(), which can simplfy code. Reviewed-by:
-
Paolo Abeni authored
Alexander Lobakin says: ==================== netdev_features: start cleaning netdev_features_t up NETDEV_FEATURE_COUNT is currently 64, which means we can't add any new features as netdev_features_t is u64. As per several discussions, instead of converting netdev_features_t to a bitmap, which would mean A LOT of changes, we can try cleaning up netdev feature bits. There's a bunch of bits which don't really mean features, rather device attributes/properties that can't be changed via Ethtool in any of the drivers. Such attributes can be moved to netdev private flags without losing any functionality. Start converting some read-only netdev features to private flags from the ones that are most obvious, like lockless Tx, inability to change network namespace etc. I was able to reduce NETDEV_FEATURE_COUNT from 64 to 60, which mean 4 free slots for new features. There are obviously more read-only features to convert, such as highDMA, "challenged VLAN", HSR (4 bits) - this will be done in subsequent series. Please note that currently netdev features are not uAPI/ABI by any means. Ethtool passes their names and bits to the userspace separately and there are no hardcoded names/bits in the userspace, so that new Ethtool could work on older kernels and vice versa. This, however, isn't true for Ethtools < 3.4. I haven't changed the bit positions of the already existing features and instead replaced the freed bits with stubs. But it's anyway theoretically possible that Ethtools older than 2011 will break. I hope no currently supported distros supply such an ancient version. Shell scripts also most likely won't break since the removed bits were always read-only, meaning nobody would try touching them from a script. ==================== Link: https://patch.msgid.link/20240829123340.789395-1-aleksander.lobakin@intel.comSigned-off-by:
-
Alexander Lobakin authored
NETIF_F_ALL_FCOE is used only in vlan_dev.c, 2 times. Now that it's only 2 bits, open-code it and remove the definition from netdev_features.h. Suggested-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
Alexander Lobakin authored
Ability to handle maximum FCoE frames of 2158 bytes can never be changed and thus more of an attribute, not a toggleable feature. Move it from netdev_features_t to "cold" priv flags (bitfield bool) and free yet another feature bit. Signed-off-by:
-
Alexander Lobakin authored
"Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by:
-
Alexander Lobakin authored
NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by:
-
Alexander Lobakin authored
Make dev->priv_flags `u32` back and define bits higher than 31 as bitfield booleans as per Jakub's suggestion. This simplifies code which accesses these bits with no optimization loss (testb both before/after), allows to not extend &netdev_priv_flags each time, but also scales better as bits > 63 in the future would only add a new u64 to the structure with no complications, comparing to that extending ::priv_flags would require converting it to a bitmap. Note that I picked `unsigned long :1` to not lose any potential optimizations comparing to `bool :1` etc. Suggested-by:
-
Pawel Dembicki authored
This commit introduces implementations of three functions: .port_fdb_dump .port_fdb_add .port_fdb_del The FDB database organization is the same as in other old Vitesse chips: It has 2048 rows and 4 columns (buckets). The row index is calculated by the hash function 'vsc73xx_calc_hash' and the FDB entry must be placed exactly into row[hash]. The chip selects the bucket number by itself. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Link: https://patch.msgid.link/20240827123938.582789-1-paweldembicki@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-08-30 The first patch is by Duy Nguyen and document the R-Car V4M support in the rcar-canfd DT bindings. Frank Li's patch converts the microchip,mcp251x.txt DT bindings documentation to yaml. A patch by Zhang Changzhong update a comment in the j1939 CAN networking stack. Stefan Mätje's patch updates the CAN configuration netlink code, so that the bit timing calculation doesn't work on stale can_priv::ctrlmode data. Martin Jocic contributes a patch for the kvaser_pciefd driver to convert some ifdefs into if (IS_ENABLED()). The last patch is by Yan Zhen and simplifies the probe() function of the kvaser USB driver by using dev_err_probe(). * tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: kvaser_usb: Simplify with dev_err_probe() can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode can: j1939: use correct function name in comment dt-bindings: can: convert microchip,mcp251x.txt to yaml dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support ==================== Link: https://patch.msgid.link/20240830214406.1605786-1-mkl@pengutronix.deSigned-off-by:
-
ChunHao Lin authored
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically based on the one with XID 0x649, but with different firmware file. Signed-off-by:
ChunHao Lin <hau@realtek.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.comSigned-off-by:
-
Joe Damato authored
In commit 27f91aaf ("netdev-genl: Add netlink framework functions for napi"), when an invalid NAPI ID is specified the return value -EINVAL is used and no extack is set. Change the return value to -ENOENT and set the extack. Before this commit: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --do napi-get --json='{"id": 451}' Netlink error: Invalid argument nl_len = 36 (20) nl_flags = 0x100 nl_type = 2 error: -22 After this commit: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --do napi-get --json='{"id": 451}' Netlink error: No such file or directory nl_len = 44 (28) nl_flags = 0x300 nl_type = 2 error: -2 extack: {'bad-attr': '.id'} Suggested-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.comSigned-off-by:
-
- 02 Sep, 2024 1 commit
-
-
Andrew Halaney authored
This callback doesn't seem to serve much purpose, and prevents things like: - systemd.link files from disabling autonegotiation - carrier detection in NetworkManager - any ethtool setting prior to userspace bringing the link up. The only fear I can think of is accessing unclocked resources due to pm_runtime, but ethtool ioctls handle that as of commit f32a2137 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") Reviewed-by:Dmitry Dolenko <d.dolenko@metrotek.ru> Tested-by:
Andrew Halaney <ahalaney@redhat.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
- 01 Sep, 2024 4 commits
-
-
David S. Miller authored
Srujana Challa says: ==================== octeontx2-af: update CPT block for CN10KB and CN10KA B0 This commit addresses two key updates for the CN10KB and CN10KA B0: 1. The number of FLT interrupt vectors has been reduced to 2 on CN10KB. The code is updated to reflect this change across the CN10K series. 2. The maximum CPT credits that RX can use are now configurable through a hardware CSR on CN10KA B0. This patch sets the default value to optimize peak performance, aligning it with other chip versions. v2: - Addressed the review comments. ==================== Signed-off-by: -
Srujana Challa authored
The maximum CPT credits that RXC can use are now configurable on CN10KA B0 through a hardware CSR. This patch sets the default value to optimize peak performance, aligning it with other chip versions. Signed-off-by:
Srujana Challa <schalla@marvell.com> Reviewed-by:
-
Srujana Challa authored
This patch modifies the driver to prevent access to RXC hardware registers on the CN10KB, as RXC is not available on this chip. Signed-off-by:
-
Srujana Challa authored
This patch updates the driver to use a dynamic number of vectors instead of a hard-coded value. This change accommodates the CN10KB, which has 2 vectors, unlike the previously supported chips that have 3 vectors. Signed-off-by:
-
- 31 Aug, 2024 9 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== Unmask upper DSCP bits - part 2 tl;dr - This patchset continues to unmask the upper DSCP bits in the IPv4 flow key in preparation for allowing IPv4 FIB rules to match on DSCP. No functional changes are expected. Part 1 was merged in commit ("Merge branch 'unmask-upper-dscp-bits-part-1'"). The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB lookup to match against the TOS selector in FIB rules and routes. It is currently impossible for user space to configure FIB rules that match on the DSCP value as the upper DSCP bits are either masked in the various call sites that initialize the IPv4 flow key or along the path to the FIB core. In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we need to make sure the entire DSCP value is present in the IPv4 flow key. This patchset continues to unmask the upper DSCP bits, but this time in the output route path. Patches #1-#3 unmask the upper DSCP bits in the various places that invoke the core output route lookup functions directly. Patches #4-#6 do the same in three helpers that are widely used in the output path to initialize the TOS field in the IPv4 flow key. The rest of the patches continue to unmask these bits in call sites that invoke the following wrappers around the core lookup functions: Patch #7 - __ip_route_output_key() Patches #8-#12 - ip_route_output_flow() The next patchset will handle the callers of ip_route_output_ports() and ip_route_output_key(). No functional changes are expected as commit 1fa3314c ("ipv4: Centralize TOS matching") moved the masking of the upper DSCP bits to the core where 'flowi4_tos' is matched against the TOS selector. Changes since v1 [1]: * Remove IPTOS_RT_MASK in patch #7 instead of in patch #6 [1] https://lore.kernel.org/netdev/20240827111813.2115285-1-idosch@nvidia.com/ ==================== Signed-off-by: -
Ido Schimmel authored
Unmask the upper DSCP bits when calling ip_route_output_flow() so that in the future it could perform the FIB lookup according to the full DSCP value. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Ido Schimmel authored
Unmask the upper DSCP bits when calling ip_route_output_flow() so that in the future it could perform the FIB lookup according to the full DSCP value. Signed-off-by:
-
Ido Schimmel authored
Unmask the upper DSCP bits when calling ip_route_output_flow() so that in the future it could perform the FIB lookup according to the full DSCP value. Signed-off-by:
-
Ido Schimmel authored
The function calls flowi4_init_output() to initialize an IPv4 flow key with which it then performs a FIB lookup using ip_route_output_flow(). The 'tos' variable with which the TOS value in the IPv4 flow key (flowi4_tos) is initialized contains the full DS field. Unmask the upper DSCP bits so that in the future the FIB lookup could be performed according to the full DSCP value. Signed-off-by:
-
Ido Schimmel authored
The function calls flowi4_init_output() to initialize an IPv4 flow key with which it then performs a FIB lookup using ip_route_output_flow(). 'arg->tos' with which the TOS value in the IPv4 flow key (flowi4_tos) is initialized contains the full DS field. Unmask the upper DSCP bits so that in the future the FIB lookup could be performed according to the full DSCP value. Signed-off-by:
-
Ido Schimmel authored
The function returns a value that is used to initialize 'flowi4_tos' before being passed to the FIB lookup API in the following call chain: xfrm_bundle_create() tos = xfrm_get_tos(fl, family) xfrm_dst_lookup(..., tos, ...) __xfrm_dst_lookup(..., tos, ...) xfrm4_dst_lookup(..., tos, ...) __xfrm4_dst_lookup(..., tos, ...) fl4->flowi4_tos = tos __ip_route_output_key(net, fl4) Unmask the upper DSCP bits so that in the future the output route lookup could be performed according to the full DSCP value. Remove IPTOS_RT_MASK since it is no longer used. Signed-off-by:
-
Ido Schimmel authored
build_sk_flow_key() and __build_flow_key() are used to build an IPv4 flow key before calling one of the FIB lookup APIs. Unmask the upper DSCP bits so that in the future the lookup could be performed according to the full DSCP value. Signed-off-by:
-
Ido Schimmel authored
The function is used by a few socket types to retrieve the TOS value with which to perform the FIB lookup for packets sent through the socket (flowi4_tos). If a DS field was passed using the IP_TOS control message, then it is used. Otherwise the one specified via the IP_TOS socket option. Unmask the upper DSCP bits so that in the future the lookup could be performed according to the full DSCP value. Signed-off-by:
-
