Also replace deprecated printk(KERN_ERR...) with pr_err() as suggested
by Yinghai, attaching the function name to provide plenty info.
Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It creates a mapping of 3 pages and checks that reads, writes and
clear-refs result in present and soft-dirt bits reported from pagemap2
set as expected.

[akpm@linux-foundation.org: alphasort the Makefile TARGETS to reduce rejects]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow zcache to be built/loaded as a module.  Note runtime dependency
disallows loading if cleancache/frontswap lazy initialization patches
are not present.  Zsmalloc support has not yet been merged into zcache
but, once merged, could now easily be selected via a module_param.

If built-in (not built as a module), the original mechanism of enabling
via a kernel boot parameter is retained, but this should be considered
deprecated.

Note that module unload is explicitly not yet supported.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Rebased with different order of patches]
[v2: Removed [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef]
[v3: Rebased on top of ramster->zcache move]
[v4: Redid the Makefile]
[v5: s/ZCACHE2/ZCACHE/]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enable module support for ramster.  Note runtime dependency disallows
loading if cleancache/frontswap lazy initialization patches are not
present.

If built-in (not built as a module), the original mechanism of enabling
via a kernel boot parameter is retained, but this should be considered
deprecated.

Note that module unload is explicitly not yet supported.

[v1: Fixed compile issues since ramster_init now has four arguments]
[v2: Fixed rebase on ramster->zcache move]
[akpm@linux-foundation.org: use_frontswap_selfshrink cannot be __initdata]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the past it either used to be NULL or the "older" backend. Now we
also return -Exx error codes.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow Xen tmem shim to be built/loaded as a module.  Xen self-ballooning
and frontswap-selfshrinking are now also "lazily" initialized when the
Xen tmem shim is loaded as a module, unless explicitly disabled by
module parameters.

Note runtime dependency disallows loading if cleancache/frontswap lazy
initialization patches are not present.

If built-in (not built as a module), the original mechanism of enabling
via a kernel boot parameter is retained, but this should be considered
deprecated.

Note that module unload is explicitly not yet supported.

[v1: Removed the [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef]
[v2: Squashed the xen/tmem: Remove the subsys call patch in]
[akpm@linux-foundation.org: fix build (disable_frontswap_selfshrinking undeclared)]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cleancache_ops is used to decide whether backend is registered.
So now cleancache_enabled is always true if defined CONFIG_CLEANCACHE.
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of using a backend_registered to determine whether a backend is
enabled.  This allows us to remove the backend_register check and just
do 'if (cleancache_ops)'

[v1: Rebase on top of b97c4b430b0a (ramster->zcache move]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to
be built/loaded as modules rather than built-in and enabled by a boot
parameter, this patch provides "lazy initialization", allowing backends
to register to cleancache even after filesystems were mounted.  Calls to
init_fs and init_shared_fs are remembered as fake poolids but no real
tmem_pools created.  On backend registration the fake poolids are mapped
to real poolids and respective tmem_pools.
Signed-off-by: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Minor fixes: used #define for some values and bools]
[v2: Removed CLEANCACHE_HAS_LAZY_INIT]
[v3: Added more comments, added a lock for [shared_|]fs_poolid_map]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Frontswap initialization routine depends on swap_lock, which want to be
atomic about frontswap's first appearance.  IOW, frontswap is not present
and will fail all calls OR frontswap is fully functional but if new
swap_info_struct isn't registered by enable_swap_info, swap subsystem
doesn't start I/O so there is no race between init procedure and page I/O
working on frontswap.

So let's remove unnecessary swap_lock dependency.

Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
[v1: Rebased on my branch, reworked to work with backends loading late]
[v2: Added a check for !map]
[v3: Made the invalidate path follow the init path]
[v4: Address comments by Wanpeng Li <liwanp@linux.vnet.ibm.com>]
Signed-off-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After allowing tmem backends to build/run as modules, frontswap_enabled
always true if defined CONFIG_FRONTSWAP.  But frontswap_test() depends on
whether backend is registered, mv it into frontswap.c using fronstswap_ops
to make the decision.

frontswap_set/clear are not used outside frontswap, so don't export them.
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This simplifies the code in the frontswap - we can get rid of the
'backend_registered' test and instead check against frontswap_ops.

[v1: Rebase on top of 703ba7fe (ramster->zcache move]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to
be built/loaded as modules rather than built-in and enabled by a boot
parameter, this patch provides "lazy initialization", allowing backends
to register to frontswap even after swapon was run.  Before a backend
registers all calls to init are recorded and the creation of tmem_pools
delayed until a backend registers or until a frontswap store is
attempted.
Signed-off-by: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Fixes per Seth Jennings suggestions]
[v2: Removed FRONTSWAP_HAS_.. ]
[v3: Fix up per Bob Liu <lliubbo@gmail.com> recommendations]
[v4: Fix up per Andrew's comments]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call cond_resched() in shrink_dcache_parent() to maintain interactivity.

Before this patch:

	void shrink_dcache_parent(struct dentry * parent)
	{
		while ((found = select_parent(parent, &dispose)) != 0)
			shrink_dentry_list(&dispose);
	}

select_parent() populates the dispose list with dentries which
shrink_dentry_list() then deletes.  select_parent() carefully uses
need_resched() to avoid doing too much work at once.  But neither
shrink_dcache_parent() nor its called functions call cond_resched().  So
once need_resched() is set select_parent() will return single dentry
dispose list which is then deleted by shrink_dentry_list().  This is
inefficient when there are a lot of dentry to process.  This can cause
softlockup and hurts interactivity on non preemptable kernels.

This change adds cond_resched() in shrink_dcache_parent().  The benefit
of this is that need_resched() is quickly cleared so that future calls
to select_parent() are able to efficiently return a big batch of dentry.

These additional cond_resched() do not seem to impact performance, at
least for the workload below.

Here is a program which can cause soft lockup if other system activity
sets need_resched().

	int main()
	{
	        struct rlimit rlim;
	        int i;
	        int f[100000];
	        char buf[20];
	        struct timeval t1, t2;
	        double diff;

	        /* cleanup past run */
	        system("rm -rf x");

	        /* boost nfile rlimit */
	        rlim.rlim_cur = 200000;
	        rlim.rlim_max = 200000;
	        if (setrlimit(RLIMIT_NOFILE, &rlim))
	                err(1, "setrlimit");

	        /* make directory for files */
	        if (mkdir("x", 0700))
	                err(1, "mkdir");

	        if (gettimeofday(&t1, NULL))
	                err(1, "gettimeofday");

	        /* populate directory with open files */
	        for (i = 0; i < 100000; i++) {
	                snprintf(buf, sizeof(buf), "x/%d", i);
	                f[i] = open(buf, O_CREAT);
	                if (f[i] == -1)
	                        err(1, "open");
	        }

	        /* close some of the files */
	        for (i = 0; i < 85000; i++)
	                close(f[i]);

	        /* unlink all files, even open ones */
	        system("rm -rf x");

	        if (gettimeofday(&t2, NULL))
	                err(1, "gettimeofday");

	        diff = (((double)t2.tv_sec * 1000000 + t2.tv_usec) -
	                ((double)t1.tv_sec * 1000000 + t1.tv_usec));

	        printf("done: %g elapsed\n", diff/1e6);
	        return 0;
	}
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Its only caller evict() has promised a non-NULL inode->i_bdev.
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When we run the crackerjack testsuite, the inotify_add_watch test is
stalled.

This is caused by the invalid mask 0 - the task is waiting for the event
but it never comes.  inotify_add_watch() should return -EINVAL as it did
before commit 676a0675 ("inotify: remove broken mask checks causing
unmount to be EINVAL").  That commit removes the invalid mask check, but
that check is needed.

Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call.
If none are set, just return -EINVAL.

Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger
the problem that above commit fixed.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Jim Somerville <Jim.Somerville@windriver.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the following compilation warnings:

  mm/slab.c: In function `kmem_cache_init_late':
  mm/slab.c:1778:2: warning: statement with no effect [-Wunused-value]

  mm/page_cgroup.c: In function `page_cgroup_init':
  mm/page_cgroup.c:305:2: warning: statement with no effect [-Wunused-value]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unused local `us', which broke the build.  Also nuke an unneeded
cast.

Repairs commit 191648d0 ("usb: storage: Convert US_DEBUGP to
usb_stor_dbg").

Cc: Joe Perches <joe@perches.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 update from Catalin Marinas:
 "Main features:

   - Versatile Express SoC (model) support - DT files and Kconfig
     entries (there are no arch/arm64/mach-* directories).  The bulk of
     the code has already been moved to drivers/ as part of the ARM SoC
     clean-up.

   - Basic multi-cluster support (CPU logical map initialised from the
     DT)

   - Simple earlyprintk support for UART 8250/16550 and FastModel
     console output

   - Optimised kernel library bitops and string functions.

   - Automatic initialisation of the irqchip and clocks via DT"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (26 commits)
  arm64: Use acquire/release semantics instead of explicit DMB
  arm64: klib: bitops: fix unpredictable stxr usage
  arm64: vexpress: Enable ARMv8 RTSM model (SoC) support
  arm64: vexpress: Add dts files for the ARMv8 RTSM models
  arm64: Survive invalid cpu enable-methods
  arm64: mm: Correct show_pte behaviour
  arm64: Fix compat types affecting struct compat_stat
  arm64: Execute DSB during thread switching for TLB/cache maintenance
  arm64: compiling issue, need add include/asm/vga.h file
  arm64: smp: honour #address-size when parsing CPU reg property
  arm64: Define cmpxchg64 and cmpxchg64_local for outside use
  arm64: Define readq and writeq for driver module using
  arm64: Fix task tracing
  arm64: add explicit symbols to ESR_EL1 decoding
  arm64: Use irqchip_init() for interrupt controller initialisation
  arm64: psci: Use the MPIDR values from cpu_logical_map for cpu ids.
  arm64: klib: Optimised atomic bitops
  arm64: klib: Optimised string functions
  arm64: klib: Optimised memory functions
  arm64: head: match all affinity levels in the pen of the secondaries
  ...

Pull arch/metag update from James Hogan:

 - Various fixes for the interrupting perf counter handling in metag's
   perf backend.

 - Add OProfile support based on perf.

 - Sets up cache partitions for SMP so bootloader doesn't have to.

 - Patch from Paul Bolle to remove ARCH_POPULATES_NODE_MAP again
   (touches microblaze too).

 - Add TLS pointer regset to metag ptrace api.

 - Add exported metag DSP extended context handling header <asm/ech.h>.

 - Increase defconfig log buffer size to 128KiB.

 - Various fixes, typos, missing exports.

* tag 'metag-for-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: defconfigs: increase log buffer 8KiB => 128KiB
  metag: avoid unnecessary builtin dtb rebuilds
  metag: add exported <asm/ech.h> for extended context handling
  metag: export _metag_da_present and cpu_2_hwthread_id
  metag: ptrace: Implement NT_METAG_TLS
  memblock: Kill ARCH_POPULATES_NODE_MAP once more
  metag: cachepart: fix get_global_dcache_size() typo
  metag: cachepart: take into account small cache bits
  metag: smp: copy cache partition and enable GCOn
  metag: OProfile support
  metag: perf: prepare for use by oprofile
  metag: perf: don't reset TXTACTCYC
  metag: perf: use hard_processor_id() to get thread
  metag: perf: fix frequency sampling (dynamic period)
  metag: perf: add missing prev_count updates
  metag: perf: fixes for interrupting perf counters
  metag: perf: fix wrap handling in delta calculation
  metag: perf: fix core internal / perf channel mux

Pull m68k update from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove inline strlen() implementation
  m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCD
  m68k: Implement ndelay() based on the existing udelay() logic
  m68k/atari: EtherNAT - add interrupt chip definition for CPLD interrupts
  m68k/atari: EtherNEC - add platform device support
  m68k/atari: EtherNAT - platform device and IRQ support code
  m68k/atari: use dedicated irq_chip for timer D interrupts
  m68k/atari: ROM port ISA adapter support
  m68k: Add missing cmpxchg64() if CONFIG_RMW_INSNS=y

Pull edac fixes from Mauro Carvalho Chehab:
 "Two edac fixes:

   - i7300_edac currently reports a wrong number of DIMMs when the
     memory controller is in single channel mode

   - on some Sandy Bridge machines, the EDAC driver bails out as one of
     the PCI IDs used by the driver is hidden by BIOS.  As the driver
     uses it only to detect the type of memory, make it optional at the
     driver"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: sb_edac.c should not require prescence of IMC_DDRIO device
  i7300_edac: Fix memory detection in single mode

Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Pull HID updates from Jiri Kosina:

 - hid driver transport cleanup, finalizing the long-desired decoupling
   of core from transport layers, by Benjamin Tissoires and Henrik
   Rydberg

 - support for hybrid finger/pen multitouch HID devices, by Benjamin
   Tissoires

 - fix for long-standing issue in Logitech unifying driver sometimes not
   inializing properly due to device specifics, by Andrew de los Reyes

 - Wii remote driver updates to support 2nd generation of devices, by
   David Herrmann

 - support for Apple IR remote

 - roccat driver now supports new devices (Roccat Kone Pure, IskuFX), by
   Stefan Achatz

 - debugfs locking fixes in hid debug interface, by Jiri Kosina

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits)
  HID: protect hid_debug_list
  HID: debug: break out hid_dump_report() into hid-debug
  HID: Add PID for Japanese version of NE4K keyboard
  HID: hid-lg4ff add support for new version of DFGT wheel
  HID: icade: u16 which never < 0
  HID: clarify Magic Mouse Kconfig description
  HID: appleir: add support for Apple ir devices
  HID: roccat: added media key support for Kone
  HID: hid-lenovo-tpkbd: remove doubled hid_get_drvdata
  HID: i2c-hid: fix length for set/get report in i2c hid
  HID: wiimote: parse reduced status reports
  HID: wiimote: add 2nd generation Wii Remote IDs
  HID: wiimote: use unique battery names
  HID: hidraw: warn if userspace headers are outdated
  HID: multitouch: force BTN_STYLUS for pen devices
  HID: multitouch: append " Pen" to the name of the stylus input
  HID: multitouch: add handling for pen in dual-sensors device
  HID: multitouch: change touch sensor detection in mt_input_configured()
  HID: multitouch: do not map usage from non used reports
  HID: multitouch: breaks out touch handling in specific functions
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...

Pull x86 RAS changes from Ingo Molnar:

 - Add an Intel CMCI hotplug fix

 - Add AMD family 16h EDAC support

 - Make the AMD MCE banks code more flexible for virtual environments

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  amd64_edac: Add Family 16h support
  x86/mce: Rework cmci_rediscover() to play well with CPU hotplug
  x86, MCE, AMD: Use MCG_CAP MSR to find out number of banks on AMD
  x86, MCE, AMD: Replace shared_bank array with is_shared_bank() helper

Pull x86 platform changes from Ingo Molnar:
 "Small fixes and cleanups all over the map"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Drop unneeded include <asm/dmi.h>
  x86/olpc/xo1/sci: Don't call input_free_device() after input_unregister_device()
  x86/platform/intel/mrst: Remove cast for kmalloc() return value
  x86/platform/uv: Replace kmalloc() & memset with kzalloc()

Pull x86 paravirt update from Ingo Molnar:
 "Various paravirtualization related changes - the biggest one makes
  guest support optional via CONFIG_HYPERVISOR_GUEST"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, wakeup, sleep: Use pvops functions for changing GDT entries
  x86, xen, gdt: Remove the pvops variant of store_gdt.
  x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed
  x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed.
  x86: Make Linux guest support optional
  x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu

Pull x86 mm changes from Ingo Molnar:
 "Misc smaller changes all over the map"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu/dmar: Remove warning for HPET scope type
  x86/mm/gart: Drop unnecessary check
  x86/mm/hotplug: Put kernel_physical_mapping_remove() declaration in CONFIG_MEMORY_HOTREMOVE
  x86/mm/fixmap: Remove unused FIX_CYCLONE_TIMER
  x86/mm/numa: Simplify some bit mangling
  x86/mm: Re-enable DEBUG_TLBFLUSH for X86_32
  x86/mm/cpa: Cleanup split_large_page() and its callee
  x86: Drop always empty .text..page_aligned section

Pull perparatory x86 kasrl changes from Ingo Molnar:
 "This contains changes from the ongoing KASLR work, by Kees Cook.

  The main changes are the use of a read-only IDT on x86 (which
  decouples the userspace visible virtual IDT address from the physical
  address), and a rework of ELF relocation support, in preparation of
  random, boot-time kernel image relocation."

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Refactor the relocs tool to merge 32- and 64-bit ELF
  x86, relocs: Build separate 32/64-bit tools
  x86, relocs: Add 64-bit ELF support to relocs tool
  x86, relocs: Consolidate processing logic
  x86, relocs: Generalize ELF structure names
  x86: Use a read-only IDT alias on all CPUs

Pull x86 debug update from Ingo Molnar:
 "Two small changes: a documentation update and a constification"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, early-printk: Update earlyprintk documentation (and kill x86 copy)
  x86: Constify a few items

Pull x86 cpuid changes from Ingo Molnar:
 "The biggest change is x86 CPU bug handling refactoring and cleanups,
  by Borislav Petkov"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, CPU, AMD: Drop useless label
  x86, AMD: Correct {rd,wr}msr_amd_safe warnings
  x86: Fold-in trivial check_config function
  x86, cpu: Convert AMD Erratum 400
  x86, cpu: Convert AMD Erratum 383
  x86, cpu: Convert Cyrix coma bug detection
  x86, cpu: Convert FDIV bug detection
  x86, cpu: Convert F00F bug detection
  x86, cpu: Expand cpufeature facility to include cpu bugs

Pull x86 cleanups from Ingo Molnar:
 "Misc smaller cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Fix spelling, put space between a numeral and its units
  x86/lib: Fix spelling in the comments
  x86, quirks: Shut-up a long-standing gcc warning
  x86, msr: Unify variable names
  x86-64, docs, mm: Add vsyscall range to virtual address space layout
  x86: Drop KERNEL_IMAGE_START
  x86_64: Use __BOOT_DS instead_of __KERNEL_DS for safety

Pull extable dmesg fixlet from Ingo Molnar:
 "Small tweak to reduce kmsg boot time spam"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  extable: Flip the sorting message

Pull core timer updates from Ingo Molnar:
 "The main changes in this cycle's merge are:

   - Implement shadow timekeeper to shorten in kernel reader side
     blocking, by Thomas Gleixner.

   - Posix timers enhancements by Pavel Emelyanov:

   - allocate timer ID per process, so that exact timer ID allocations
     can be re-created be checkpoint/restore code.

   - debuggability and tooling (/proc/PID/timers, etc.) improvements.

   - suspend/resume enhancements by Feng Tang: on certain new Intel Atom
     processors (Penwell and Cloverview), there is a feature that the
     TSC won't stop in S3 state, so the TSC value won't be reset to 0
     after resume.  This can be taken advantage of by the generic via
     the CLOCK_SOURCE_SUSPEND_NONSTOP flag: instead of using the RTC to
     recover/approximate sleep time, the main (and precise) clocksource
     can be used.

   - Fix /proc/timer_list for 4096 CPUs by Nathan Zimmer: on so many
     CPUs the file goes beyond 4MB of size and thus the current
     simplistic seqfile approach fails.  Convert /proc/timer_list to a
     proper seq_file with its own iterator.

   - Cleanups and refactorings of the core timekeeping code by John
     Stultz.

   - International Atomic Clock time is managed by the NTP code
     internally currently but not exposed externally.  Separate the TAI
     code out and add CLOCK_TAI support and TAI support to the hrtimer
     and posix-timer code, by John Stultz.

   - Add deep idle support enhacement to the broadcast clockevents core
     timer code, by Daniel Lezcano: add an opt-in CLOCK_EVT_FEAT_DYNIRQ
     clockevents feature (which will be utilized by future clockevents
     driver updates), which allows the use of IRQ affinities to avoid
     spurious wakeups of idle CPUs - the right CPU with an expiring
     timer will be woken.

   - Add new ARM bcm281xx clocksource driver, by Christian Daudt

   - ... various other fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  clockevents: Set dummy handler on CPU_DEAD shutdown
  timekeeping: Update tk->cycle_last in resume
  posix-timers: Remove unused variable
  clockevents: Switch into oneshot mode even if broadcast registered late
  timer_list: Convert timer list to be a proper seq_file
  timer_list: Split timer_list_show_tickdevices
  posix-timers: Show sigevent info in proc file
  posix-timers: Introduce /proc/PID/timers file
  posix timers: Allocate timer id per process (v2)
  timekeeping: Make sure to notify hrtimers when TAI offset changes
  hrtimer: Fix ktime_add_ns() overflow on 32bit architectures
  hrtimer: Add expiry time overflow check in hrtimer_interrupt
  timekeeping: Shorten seq_count region
  timekeeping: Implement a shadow timekeeper
  timekeeping: Delay update of clock->cycle_last
  timekeeping: Store cycle_last value in timekeeper struct as well
  ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state
  timekeeping: Simplify tai updating from do_adjtimex
  timekeeping: Hold timekeepering locks in do_adjtimex and hardpps
  timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()
  ...

This patch changes the test_and_*_bit functions to use the
load-acquire/store-release instructions instead of explicit DMB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We're currently relying on unpredictable behaviour in our testops
(test_and_*_bit), as stxr is unpredictable when the status register and
the source register are the same

This patch changes reallocates the status register so as to bring us back into
the realm of predictable behaviour. Boot tested on an AEMv8 model.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...

Pull scheduler changes from Ingo Molnar:
 "The main changes in this development cycle were:

   - full dynticks preparatory work by Frederic Weisbecker

   - factor out the cpu time accounting code better, by Li Zefan

   - multi-CPU load balancer cleanups and improvements by Joonsoo Kim

   - various smaller fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  sched: Fix init NOHZ_IDLE flag
  sched: Prevent to re-select dst-cpu in load_balance()
  sched: Rename load_balance_tmpmask to load_balance_mask
  sched: Move up affinity check to mitigate useless redoing overhead
  sched: Don't consider other cpus in our group in case of NEWLY_IDLE
  sched: Explicitly cpu_idle_type checking in rebalance_domains()
  sched: Change position of resched_cpu() in load_balance()
  sched: Fix wrong rq's runnable_avg update with rt tasks
  sched: Document task_struct::personality field
  sched/cpuacct/UML: Fix header file dependency bug on the UML build
  cgroup: Kill subsys.active flag
  sched/cpuacct: No need to check subsys active state
  sched/cpuacct: Initialize cpuacct subsystem earlier
  sched/cpuacct: Initialize root cpuacct earlier
  sched/cpuacct: Allocate per_cpu cpuusage for root cpuacct statically
  sched/cpuacct: Clean up cpuacct.h
  sched/cpuacct: Remove redundant NULL checks in cpuacct_acount_field()
  sched/cpuacct: Remove redundant NULL checks in cpuacct_charge()
  sched/cpuacct: Add cpuacct_acount_field()
  sched/cpuacct: Add cpuacct_init()
  ...

Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...