This is a major rework of the sticon (parisc text console) driver in
order to support user font support.

Usually one want to use the stifb (parisc framebuffer driver) which is
based on fbcon and does support fonts and colors, but some old machines
(e.g. HP 730 workstations) don't provide a supported stifb graphic card,
and for those user fonts are preferred.

This patch drops unused code for software cursor and scrollback,
enhances the debug output and adds better documentation.

The code was tested on various machines with byte-mode and word-mode
graphic cards on GSC- and PCI-busses.
Signed-off-by: Helge Deller <deller@gmx.de>

If the ROM provides functional STI routines, always register the sticon
driver, even if the serial console was choosen as boot device.
Additionally, in that case, do not make the sticon driver the default
output console device.
Signed-off-by: Helge Deller <deller@gmx.de>

We will not allow unitialized anon mmaps, but we need this define
to prevent build errors, e.g. the debian foot package.
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Use READ_ONCE() to check if spinlock is locked.
The other changes are cleanups.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Increase the number of lws locks to 256 entries (instead of 16) and
choose lock entry based on bits 3-11 (instead of 4-7) of the relevant
address.  With this change we archieve more fine-grained locking in
futex syscalls and thus reduce the number of possible stalls.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Let the complier treat the pointers volatile to ensure that they get
accessed atomicly.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Correct the comments: The jump is forwards, not backwards.
Enable the interrupts after %r29 (reference param area) was loaded.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

This change allows the sync barrier instruction to be patched to a nop.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

The kernel test robot reports missing functions. Add them.

hppa-linux-ld: drivers/firmware/arm_scmi/perf.o: in function `scmi_perf_fc_ring_db':
 (.text+0x610): undefined reference to `ioread64_hi_lo'
 (.text+0x63c): undefined reference to `iowrite64_hi_lo'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Enable libata support for the Nat Semi NS87415 controller, and
disable the soon to be removed legacy ide driver entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

HPUX has separate NDELAY & NONBLOCK values. In the past we wanted to
be able to run HP-UX binaries natively on parisc Linux which is why
we defined O_NONBLOCK to 000200004 to distinguish NDELAY & NONBLOCK
bits.
But with 2 bits set in this bitmask we often ran into compatibility
issues with other Linux applications which often only test one bit (or
even compare the values).

To avoid such issues in the future, this patch changes O_NONBLOCK to
become 000200000. That way old programs will still be functional, and
for new programs we now have only one bit set.

Update the comment about SOCK_NONBLOCK too.
Signed-off-by: Helge Deller <deller@gmx.de>

Those flags are nowhere used in the Linux kernel and were added when we
still wanted to support HP-UX in a compat mode. Since we never will
support HP-UX, drop those flags.
Signed-off-by: Helge Deller <deller@gmx.de>

No need to allow external interrupts when the IPI loop is going to
finish now.
Signed-off-by: Helge Deller <deller@gmx.de>

When running on qemu, SeaBIOS-hppa stores the iomem address for the
emulated fw_cfg port in PAGE0_>pad0[2/3]. Let the Linux driver
auto-configure the fw_cfg interface with it, so that the fw_cfg info
shows up in /sys/firmware/qemu_fw_cfg.
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Pull SPDX updates from Greg KH:
 "Here are some SPDX-specific changes for 5.10-rc1.

  They include:

   - driver fixes to make spdxcheck.pl work properly

   - add GFDL licenses as "deprecated" but required due to some of our
     documentation using them

   - add Zlib license as "deprecated" but required because we have code
     with this license in the tree.

   - convert some drivers to have SPDX identifiers that previously
     didn't have them.

  All have been in linux-next for a very long time with no reported
  issues"

* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  scripts/spdxcheck.py: handle license identifiers in XML comments
  net/mlx5: IPsec: make spdxcheck.py happy
  LICENSES/deprecated: add Zlib license text
  LICENSE: add GFDL deprecated licenses
  net/qla3xxx: Convert to SPDX license identifiers
  net/qlge: Convert to SPDX license identifiers
  net/qlcnic: Convert to SPDX license identifiers
  scsi/qla2xxx: Convert to SPDX license identifiers
  scsi/qla4xxx: Convert to SPDX license identifiers

Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.10-rc1

  They include a lot of different things, all related to the driver core
  and/or some driver logic:

   - sysfs common write functions to make it easier to audit sysfs
     attributes

   - device connection cleanups and fixes

   - devm helpers for a few functions

   - NOIO allocations for when devices are being removed

   - minor cleanups and fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
  regmap: debugfs: use semicolons rather than commas to separate statements
  platform/x86: intel_pmc_core: do not create a static struct device
  drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
  drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
  mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
  drivers core: Miscellaneous changes for sysfs_emit
  drivers core: Reindent a couple uses around sysfs_emit
  drivers core: Remove strcat uses around sysfs_emit and neaten
  drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
  sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
  dyndbg: use keyword, arg varnames for query term pairs
  driver core: force NOIO allocations during unplug
  platform_device: switch to simpler IDA interface
  driver core: platform: Document return type of more functions
  Revert "driver core: Annotate dev_err_probe() with __must_check"
  Revert "test_firmware: Test platform fw loading on non-EFI systems"
  iio: adc: xilinx-xadc: use devm_krealloc()
  hwmon: pmbus: use more devres helpers
  devres: provide devm_krealloc()
  syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.10-rc1.

  Lots of little things in here, including:

   - tasklet_setup api conversions

   - sysrq support for capital letters

   - vt and vc cleanups and unwinding the mess some more

   - serial driver updates and minor tweaks

   - new device ids

   - rs485 support for some drivers

   - serial binding documentation updates

   - lots of small serial driver changes for reported issues

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  serial: mcf: add sysrq capability
  serial: fsl_lpuart: add sysrq support when using dma
  fbcon: remove no-op fbcon_set_origin()
  tty/sysrq: Extend the sysrq_key_table to cover capital letters
  serial: max310x: rework RX interrupt handling
  serial: 8250_dw: Fix clk-notifier/port suspend deadlock
  serial: 8250: Skip uninitialized TTY port baud rate update
  serial: 8250: Discard RTS/DTS setting from clock update method
  tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
  serial: 8250_fsl: Fix TX interrupt handling condition
  serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
  tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
  tty: serial: lpuart: fix lpuart32_write usage
  serial: qcom_geni_serial: To correct QUP Version detection logic
  serial: mvebu-uart: fix unused variable warning
  vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
  serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
  tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  pch_uart: drop double zeroing
  ...

A recent change to the checksum code removed usage of some extra
arguments, alongside with storage on the stack for those, and the stack
pointer no longer needed to be adjusted in the function prologue.

But a left over subtraction wasn't removed in the function epilogue,
causing the function to return with the stack pointer moved 16 bytes
away from where it should have.  This corrupted local state and lead to
weird crashes.

This simply removes the leftover instruction from the epilogue.

Fixes: 70d65cd5 ("ppc: propagate the calling conventions change down to csum_partial_copy_generic()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for KTD253

  Fix-ups:
   - Add Device Tree documentation; common, kinetic,ktd253
   - Use correct header(s); tosa_lcd, tosa_bl

  Bug Fixes:
   - Fix refcount imbalance; sky81452-backlight"

* tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa_bl: Include the right header
  backlight: tosa_lcd: Include the right header
  backlight: Add Kinetic KTD253 backlight driver
  dt-bindings: backlight: Add Kinetic KTD253 bindings
  dt-bindings: backlight: Add some common backlight properties
  backlight: sky81452-backlight: Fix refcount imbalance on error

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for initialising shared (between children) Regmaps
   - Add support for Kontron SL28CPLD
   - Add support for ENE KB3930 Embedded Controller
   - Add support for Intel FPGA PAC MAX 10 BMC

  New Device Support:
   - Add support for Power to Ricoh RN5T618
   - Add support for UART to Intel Lakefield
   - Add support for LP87524_Q1 to Texas Instruments LP87565

  New Functionality:
   - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
   - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
   - Use new GPIOD API; dm355evm_msp
   - Add wake-up capability; sprd-sc27xx-spi
   - Add ACPI support; kempld-core

  Fix-ups:
   - Trivial (spelling/whitespace); Kconfig, ab8500
   - Fix for unused variables; khadas-mcu, kempld-core
   - Remove unused header file(s); mt6360-core
   - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
   - Add COMPILE_TEST support; asic3, tmio_core
   - Add dependency on I2C; SL28CPLD

  Bug Fixes:
   - Fix memory leak(s); sm501
   - Do not free regmap_config's 'name' until exit; syscon"

* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
  mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
  mfd: sl28cpld: Depend on I2C
  mfd: asic3: Build if COMPILE_TEST=y
  dt-bindings: mfd: Correct interrupt flags in examples
  mfd: Add ACPI support to Kontron PLD driver
  mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
  mfd: lp87565: Add LP87524-Q1 variant
  dt-bindings: mfd: Add LP87524-Q1
  dt-bindings: mfd: lp87565: Convert to yaml
  mfd: mt6360: Remove unused include <linux/version.h>
  mfd: sm501: Fix leaks in probe()
  mfd: syscon: Don't free allocated name for regmap_config
  dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
  dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
  dt-bindings: mfd: ab8500: Remove weird Unicode characters
  mfd: sprd: Add wakeup capability for PMIC IRQ
  mfd: intel-lpss: Add device IDs for UART ports for Lakefield
  mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
  mfd: wcd934x: Simplify with dev_err_probe()
  mfd: stmfx: Simplify with dev_err_probe()
  ...

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream version v1.6.0-31-gcbca977ea121

 - dtx_diff help text reformatting

 - Speed-up validation time for binding and dtb checks using json for
   intermediate files

 - Add support for running yamllint on DT schema files

 - Remove old booting-without-of.rst

 - Extend the example schema to address common issues

 - Cleanup handling of additionalProperties/unevaluatedProperties

 - Ensure all DSI controller schemas reference dsi-controller.yaml

 - Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
   DFI, and Cisco Meraki

 - Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
   SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
   schema

 - Convert HiSilicon SoC and syscon bindings to DT schema

 - Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema

 - Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
   GPIO, and UART to DT schema

 - Add i.MX 8M compatible strings

 - Add LM81 and DS1780 as trivial devices

 - Various missing properties added to fix dtb validation warnings

* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
  dt-bindings: misc: explicitly add #address-cells for slave mode
  spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
  dt: Remove booting-without-of.rst
  dt-bindings: update usb-c-connector example
  dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
  dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
  dt-bindings: pwm: imx: document i.MX compatibles
  scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
  dt-bindings: Add running yamllint to dt_binding_check
  dt-bindings: powerpc: Add a schema for the 'sleep' property
  dt-bindings: pinctrl: sirf: Fix typo abitrary
  dt-bindings: pinctrl: qcom: Fix typo abitrary
  dt-bindings: Explicitly allow additional properties in common schemas
  dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  dt-bindings: Add missing 'unevaluatedProperties'
  Docs: Fixing spelling errors in Documentation/devicetree/bindings/
  dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
  dt-bindings: riscv: convert pwm bindings to json-schema
  dt-bindings: riscv: convert plic bindings to json-schema
  dt-bindings: fu540: prci: convert PRCI bindings to json-schema
  ...

Pull pin control updates from Linus Walleij:
 "Core changes:

   - NONE whatsoever, we don't even touch the core files this time
     around.

  New drivers:

   - New driver for the Toshiba Visconti SoC.

   - New subdriver for the Qualcomm MSM8226 SoC.

   - New subdriver for the Actions Semiconductor S500 SoC.

   - New subdriver for the Mediatek MT8192 SoC.

   - New subdriver for the Microchip SAMA7G5 SoC.

  Driver enhancements:

   - Intel Cherryview and Baytrail cleanups and refactorings.

   - Enhanced support for the Renesas R8A7790, more pins and groups.

   - Some optimizations for the MCP23S08 MCP23x17 variant.

   - Some cleanups around the Actions Semiconductor subdrivers.

   - A bunch of cleanups around the SH-PFC and Emma Mobile drivers.

   - The "SH-PFC" (literally SuperH pin function controller, I think)
     subdirectory is now renamed to the more neutral "renesas", as these
     are not very much centered around SuperH anymore.

   - Non-critical fixes for the Aspeed driver.

   - Non-critical fixes for the Ingenic (MIPS!) driver.

   - Fix a bunch of missing pins on the AMD pinctrl driver"

* tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits)
  pinctrl: amd: Add missing pins to the pin group list
  dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks
  pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI
  pinctrl: mediatek: Free eint data on failure
  pinctrl: single: fix debug output when #pinctrl-cells = 2
  pinctrl: single: fix pinctrl_spec.args_count bounds check
  pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent
  pinctrl: cannonlake: Modify COMMUNITY macros to be consistent
  pinctrl: tigerlake: Fix register offsets for TGL-H variant
  pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2
  pinctrl: mediatek: use devm_platform_ioremap_resource_byname()
  pinctrl: nuvoton: npcm7xx: Constify static ops structs
  pinctrl: mediatek: mt7622: add antsel pins/groups
  pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()
  pinctrl: at91-pio4: add support for sama7g5 SoC
  dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
  pinctrl: spear: simplify the return expression of tvc_connect()
  pinctrl: spear: simplify the return expression of spear310_pinctrl_probe
  pinctrl: sprd: use module_platform_driver to simplify the code
  pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.
  ...

Pull LED updates from Pavel Machek:
 "Quite a lot of stuff is going on here. Great cleanups/fixes from Marek
  and others are biggest part.

  I limited CPU LED trigger to 8 LEDs, because it was willing to
  register 1024 'triggers' on machine with 1024 CPUs. I don't believe it
  will cause any problems, but we can raise the limit if it does"

* tag 'leds-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (84 commits)
  leds: pwm: Remove platform_data support
  leds: lm3697: Fix out-of-bound access
  leds: ns2: do not guard OF match pointer with of_match_ptr
  leds: ns2: convert to fwnode API
  leds: tlc591xx: fix leak of device node iterator
  leds: pca963x: use struct led_init_data when registering
  leds: pca963x: register LEDs immediately after parsing, get rid of platdata
  leds: tca6507: remove binding comment
  leds: tca6507: cosmetic change: use helper variable
  leds: tca6507: do not set GPIO names
  dt-bindings: leds: tca6507: convert to YAML
  ledtrig-cpu: Limit to 8 CPUs
  leds: TODO: Add documentation about possible subsystem improvements
  leds: pca9532: read pwm settings from device tree
  leds: pca9532: correct shift computation in pca9532_getled
  leds: lm36274: Fix warning for undefined parameters
  leds: lm3532: Fix warnings for undefined parameters
  leds: pca963x: use flexible array
  leds: pca963x: cosmetic: rename variables
  leds: pca963x: cosmetic: rename variables
  ...

Pull SCSI updates from James Bottomley:
 "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
  hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.

  There are only three core changes: adding sense codes, cleaning up
  noretry and adding an option for limitless retries"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
  scsi: hisi_sas: Recover PHY state according to the status before reset
  scsi: hisi_sas: Filter out new PHY up events during suspend
  scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
  scsi: hisi_sas: Add check for methods _PS0 and _PR0
  scsi: hisi_sas: Add controller runtime PM support for v3 hw
  scsi: hisi_sas: Switch to new framework to support suspend and resume
  scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
  scsi: qedf: Remove redundant assignment to variable 'rc'
  scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
  scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
  scsi: sun_esp: Use module_platform_driver to simplify the code
  scsi: sun3x_esp: Use module_platform_driver to simplify the code
  scsi: sni_53c710: Use module_platform_driver to simplify the code
  scsi: qlogicpti: Use module_platform_driver to simplify the code
  scsi: mac_esp: Use module_platform_driver to simplify the code
  scsi: jazz_esp: Use module_platform_driver to simplify the code
  scsi: mvumi: Fix error return in mvumi_io_attach()
  scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
  scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
  ...

Merge tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Improve DM core's bio splitting to use blk_max_size_offset(). Also
   fix bio splitting for bios that were deferred to the worker thread
   due to a DM device being suspended.

 - Remove DM core's special handling of NVMe devices now that block core
   has internalized efficiencies drivers previously needed to be
   concerned about (via now removed direct_make_request).

 - Fix request-based DM to not bounce through indirect dm_submit_bio;
   instead have block core make direct call to blk_mq_submit_bio().

 - Various DM core cleanups to simplify and improve code.

 - Update DM cryot to not use drivers that set
   CRYPTO_ALG_ALLOCATES_MEMORY.

 - Fix DM raid's raid1 and raid10 discard limits for the purposes of
   linux-stable. But then remove DM raid's discard limits settings now
   that MD raid can efficiently handle large discards.

 - A couple small cleanups across various targets.

* tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix request-based DM to not bounce through indirect dm_submit_bio
  dm: remove special-casing of bio-based immutable singleton target on NVMe
  dm: export dm_copy_name_and_uuid
  dm: fix comment in __dm_suspend()
  dm: fold dm_process_bio() into dm_submit_bio()
  dm: fix missing imposition of queue_limits from dm_wq_work() thread
  dm snap persistent: simplify area_io()
  dm thin metadata: Remove unused local variable when create thin and snap
  dm raid: remove unnecessary discard limits for raid10
  dm raid: fix discard limits for raid1 and raid10
  dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
  dm: use dm_table_get_device_name() where appropriate in targets
  dm table: make 'struct dm_table' definition accessible to all of DM core
  dm: eliminate need for start_io_acct() forward declaration
  dm: simplify __process_abnormal_io()
  dm: push use of on-stack flush_bio down to __send_empty_flush()
  dm: optimize max_io_len() by inlining max_io_len_target_boundary()
  dm: push md->immutable_target optimization down to __process_bio()
  dm: change max_io_len() to use blk_max_size_offset()
  dm table: stack 'chunk_sectors' limit to account for target-specific splitting

Pull IPMI updates from Corey Minyard:
 "Some minor bug fixes, return values, cleanups of prints, conversion of
  tasklets to the new API.

  The biggest change is retrying the initial information fetch from the
  management controller. If that fails, the iterface is not operational,
  and one group was having trouble with the management controller not
  being ready when the OS started up. So a retry was added"

* tag 'for-linus-5.10-1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Fix wrong return value in try_smi_init()
  ipmi: msghandler: Fix a signedness bug
  ipmi: add retry in try_get_dev_id()
  ipmi: Clean up some printks
  ipmi:msghandler: retry to get device id on an error
  ipmi:sm: Print current state when the state is invalid
  ipmi: Reset response handler when failing to send the command
  ipmi: add a newline when printing parameter 'panic_op' by sysfs
  char: ipmi: convert tasklets to use new tasklet_setup() API

Pull cgroup updates from Tejun Heo:
 "Two minor changes.

  One makes cgroup interface files ignore zero-sized writes rather than
  triggering -EINVAL on them. The other change is a cleanup which
  doesn't cause any behavior changes"

* 'for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Zero sized write should be no-op
  cgroup: remove redundant kernfs_activate in cgroup_setup_root()

Fix data race in prepend_path() with re-reading mnt->mnt_ns twice
without holding the lock.

is_mounted() does check for NULL, but is_anon_ns(mnt->mnt_ns) might
re-read the pointer again which could be NULL already, if in between
reads one of kern_unmount()/kern_unmount_array()/umount_tree() sets
mnt->mnt_ns to NULL.

This is seen in production with the following stack trace:

  BUG: kernel NULL pointer dereference, address: 0000000000000048
  ...
  RIP: 0010:prepend_path.isra.4+0x1ce/0x2e0
  Call Trace:
    d_path+0xe6/0x150
    proc_pid_readlink+0x8f/0x100
    vfs_readlink+0xf8/0x110
    do_readlinkat+0xfd/0x120
    __x64_sys_readlinkat+0x1a/0x20
    do_syscall_64+0x42/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: f2683bd8 ("[PATCH] fix d_absolute_path() interplay with fsmount()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pidfd updates from Christian Brauner:
 "This introduces a new extension to the pidfd_open() syscall. Users can
  now raise the new PIDFD_NONBLOCK flag to support non-blocking pidfd
  file descriptors. This has been requested for uses in async process
  management libraries such as async-pidfd in Rust.

  Ever since the introduction of pidfds and more advanced async io
  various programming languages such as Rust have grown support for
  async event libraries. These libraries are created to help build
  epoll-based event loops around file descriptors. A common pattern is
  to automatically make all file descriptors they manage to O_NONBLOCK.

  For such libraries the EAGAIN error code is treated specially. When a
  function is called that returns EAGAIN the function isn't called again
  until the event loop indicates the the file descriptor is ready.
  Supporting EAGAIN when waiting on pidfds makes such libraries just
  work with little effort.

  This introduces a new flag PIDFD_NONBLOCK that is equivalent to
  O_NONBLOCK. This follows the same patterns we have for other (anon
  inode) file descriptors such as EFD_NONBLOCK, IN_NONBLOCK,
  SFD_NONBLOCK, TFD_NONBLOCK and the same for close-on-exec flags.

  Passing a non-blocking pidfd to waitid() currently has no effect, i.e.
  is not supported. There are users which would like to use waitid() on
  pidfds that are O_NONBLOCK and mix it with pidfds that are blocking
  and both pass them to waitid().

  The expected behavior is to have waitid() return -EAGAIN for
  non-blocking pidfds and to block for blocking pidfds without needing
  to perform any additional checks for flags set on the pidfd before
  passing it to waitid(). Non-blocking pidfds will return EAGAIN from
  waitid() when no child process is ready yet. Returning -EAGAIN for
  non-blocking pidfds makes it easier for event loops that handle EAGAIN
  specially.

  It also makes the API more consistent and uniform. In essence,
  waitid() is treated like a read on a non-blocking pidfd or a recvmsg()
  on a non-blocking socket.

  With the addition of support for non-blocking pidfds we support the
  same functionality that sockets do. For sockets() recvmsg() supports
  MSG_DONTWAIT for pidfds waitid() supports WNOHANG. Both flags are
  per-call options. In contrast non-blocking pidfds and non-blocking
  sockets are a setting on an open file description affecting all
  threads in the calling process as well as other processes that hold
  file descriptors referring to the same open file description. Both
  behaviors, per call and per open file description, have genuine
  use-cases.

  The interaction with the WNOHANG flag is documented as follows:

   - If a non-blocking pidfd is passed and WNOHANG is not raised we
     simply raise the WNOHANG flag internally. When do_wait() returns
     indicating that there are eligible child processes but none have
     exited yet we set EAGAIN. If no child process exists we continue
     returning ECHILD.

   - If a non-blocking pidfd is passed and WNOHANG is raised waitid()
     will continue returning 0, i.e. it will not set EAGAIN. This ensure
     backwards compatibility with applications passing WNOHANG
     explicitly with pidfds"

* tag 'threads-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: remove O_NONBLOCK before waiting for WSTOPPED
  tests: add waitid() tests for non-blocking pidfds
  tests: port pidfd_wait to kselftest harness
  pidfd: support PIDFD_NONBLOCK in pidfd_open()
  exit: support non-blocking pidfds

Pull kernel_clone() updates from Christian Brauner:
 "During the v5.9 merge window we reworked the process creation
  codepaths across multiple architectures. After this work we were only
  left with the _do_fork() helper based on the struct kernel_clone_args
  calling convention. As was pointed out _do_fork() isn't valid
  kernelese especially for a helper that isn't just static.

  This series removes the _do_fork() helper and introduces the new
  kernel_clone() helper. The process creation cleanup didn't change the
  name to something more reasonable mainly because _do_fork() was used
  in quite a few places. So sending this as a separate series seemed the
  better strategy.

  I originally intended to send this early in the v5.9 development cycle
  after the merge window had closed but given that this was touching
  quite a few places I decided to defer this until the v5.10 merge
  window"

* tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  sched: remove _do_fork()
  tracing: switch to kernel_clone()
  kgdbts: switch to kernel_clone()
  kprobes: switch to kernel_clone()
  x86: switch to kernel_clone()
  sparc: switch to kernel_clone()
  nios2: switch to kernel_clone()
  m68k: switch to kernel_clone()
  ia64: switch to kernel_clone()
  h8300: switch to kernel_clone()
  fork: introduce kernel_clone()

Merge tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - a selftests harness fix to flush stdout before forking to avoid
   parent and child printing duplicates messages. This is evident when
   test output is redirected to a file.

 - a tools/ wide change to avoid comma separated statements from Joe
   Perches. This fix spans tools/lib, tools/power/cpupower, and
   selftests.

* tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  tools: Avoid comma separated statements
  selftests/harness: Flush stdout before forking

Pull xfs updates from Darrick Wong:
 "The biggest changes are two new features for the ondisk metadata: one
  to record the sizes of the inode btrees in the AG to increase
  redundancy checks and to improve mount times; and a second new feature
  to support timestamps until the year 2486.

  We also fixed a problem where reflinking into a file that requires
  synchronous writes wouldn't actually flush the updates to disk; clean
  up a fair amount of cruft; and started fixing some bugs in the
  realtime volume code.

  Summary:

   - Clean up the buffer ioend calling path so that the retry strategy
     isn't quite so scattered everywhere.

   - Clean up m_sb_bp handling.

   - New feature: storing inode btree counts in the AGI to speed up
     certain mount time per-AG block reservation operatoins and add a
     little more metadata redundancy.

   - New feature: Widen inode timestamps and quota grace expiration
     timestamps to support dates through the year 2486.

   - Get rid of more of our custom buffer allocation API wrappers.

   - Use a proper VLA for shortform xattr structure namevals.

   - Force the log after reflinking or deduping into a file that is
     opened with O_SYNC or O_DSYNC.

   - Fix some math errors in the realtime allocator"

* tag 'xfs-5.10-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (42 commits)
  xfs: ensure that fpunch, fcollapse, and finsert operations are aligned to rt extent size
  xfs: make sure the rt allocator doesn't run off the end
  xfs: Remove unneeded semicolon
  xfs: force the log after remapping a synchronous-writes file
  xfs: Convert xfs_attr_sf macros to inline functions
  xfs: Use variable-size array for nameval in xfs_attr_sf_entry
  xfs: Remove typedef xfs_attr_shortform_t
  xfs: remove typedef xfs_attr_sf_entry_t
  xfs: Remove kmem_zalloc_large()
  xfs: enable big timestamps
  xfs: trace timestamp limits
  xfs: widen ondisk quota expiration timestamps to handle y2038+
  xfs: widen ondisk inode timestamps to deal with y2038+
  xfs: redefine xfs_ictimestamp_t
  xfs: redefine xfs_timestamp_t
  xfs: move xfs_log_dinode_to_disk to the log recovery code
  xfs: refactor quota timestamp coding
  xfs: refactor default quota grace period setting code
  xfs: refactor quota expiration timer modification
  xfs: explicitly define inode timestamp range
  ...

Pull iomap updates from Darrick Wong:
 "There's not a lot of new stuff going on here -- a little bit of code
  refactoring to make iomap workable with btrfs' fsync locking model,
  cleanups in preparation for adding THP support for filesystems, and
  fixing a data corruption issue for blocksize < pagesize filesystems.

  Summary:

   - Don't WARN_ON weird states that unprivileged users can create.

   - Don't invalidate page cache when direct writes want to fall back to
     buffered.

   - Fix some problems when readahead ios fail.

   - Fix a problem where inline data pages weren't getting flushed
     during an unshare operation.

   - Rework iomap to support arbitrarily many blocks per page in
     preparation to support THP for the page cache.

   - Fix a bug in the blocksize < pagesize buffered io path where we
     could fail to initialize the many-blocks-per-page uptodate bitmap
     correctly when the backing page is actually up to date. This could
     cause us to forget to write out dirty pages.

   - Split out the generic_write_sync at the end of the directio write
     path so that btrfs can drop the inode lock before sync'ing the
     file.

   - Call inode_dio_end before trying to sync the file after a O_DSYNC
     direct write (instead of afterwards) to match the behavior of the
     old directio code"

* tag 'iomap-5.10-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Call inode_dio_end() before generic_write_sync()
  iomap: Allow filesystem to call iomap_dio_complete without i_rwsem
  iomap: Set all uptodate bits for an Uptodate page
  iomap: Change calling convention for zeroing
  iomap: Convert iomap_write_end types
  iomap: Convert write_count to write_bytes_pending
  iomap: Convert read_count to read_bytes_pending
  iomap: Support arbitrarily many blocks per page
  iomap: Use bitmap ops to set uptodate bits
  iomap: Use kzalloc to allocate iomap_page
  fs: Introduce i_blocks_per_page
  iomap: Fix misplaced page flushing
  iomap: Use round_down/round_up macros in __iomap_write_begin
  iomap: Mark read blocks uptodate in write_begin
  iomap: Clear page error before beginning a write
  iomap: Fix direct I/O write consistency check
  iomap: fix WARN_ON_ONCE() from unprivileged users

Pull iommu updates from Joerg Roedel:

 - ARM-SMMU Updates from Will:

      - Continued SVM enablement, where page-table is shared with CPU

      - Groundwork to support integrated SMMU with Adreno GPU

      - Allow disabling of MSI-based polling on the kernel command-line

      - Minor driver fixes and cleanups (octal permissions, error
        messages, ...)

 - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
   a device tries DMA on memory owned by a guest. This needs new
   fault-types as well as a rewrite of the IOMMU memory semaphore for
   command completions.

 - Allow broken Intel IOMMUs (wrong address widths reported) to still be
   used for interrupt remapping.

 - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
   address spaces of processes running in a VM.

 - Support for the MT8167 IOMMU in the Mediatek IOMMU driver.

 - Device-tree updates for the Renesas driver to support r8a7742.

 - Several smaller fixes and cleanups all over the place.

* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
  iommu/vt-d: Gracefully handle DMAR units with no supported address widths
  iommu/vt-d: Check UAPI data processed by IOMMU core
  iommu/uapi: Handle data and argsz filled by users
  iommu/uapi: Rename uapi functions
  iommu/uapi: Use named union for user data
  iommu/uapi: Add argsz for user filled data
  docs: IOMMU user API
  iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
  iommu/arm-smmu-v3: Add SVA device feature
  iommu/arm-smmu-v3: Check for SVA features
  iommu/arm-smmu-v3: Seize private ASID
  iommu/arm-smmu-v3: Share process page tables
  iommu/arm-smmu-v3: Move definitions to a header
  iommu/io-pgtable-arm: Move some definitions to a header
  iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
  iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
  iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
  iommu/amd: Use 4K page for completion wait write-back semaphore
  iommu/tegra-smmu: Allow to group clients in same swgroup
  iommu/tegra-smmu: Fix iova->phys translation
  ...

Merge branch 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Minor enhancement of using %p to print phys_addr_r and also compiler
  warnings"

* 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Mark max_segment with static keyword
  swiotlb: Declare swiotlb_late_init_with_default_size() in header
  swiotlb: Use %pa to print phys_addr_t variables

Pull PNP updates from Rafael Wysocki:
 "These clean the PNP code somewhat:

   - Remove the now unused pnp_find_card() function (Christoph Hellwig)

   - Drop duplicate pci.h include from the quirks code and add an
     "internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
     Tao)"

* tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: remove the now unused pnp_find_card() function
  PNP: ACPI: Fix missing-prototypes in acpi_pnp.c
  PNP: quirks: Fix duplicate included pci.h