- 07 Dec, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-05 (ice, i40e, iavf) This series contains updates to ice, i40e and iavf drivers. Michal fixes incorrect usage of VF MSIX value and index calculation for ice. Marcin restores disabling of Rx VLAN filtering which was inadvertently removed for ice. Ivan Vecera corrects improper messaging of MFS port for i40e. Jake fixes incorrect checking of coalesce values on iavf. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero i40e: Fix unexpected MFS warning message ice: Restore fix disabling RX VLAN filtering ice: change vfs.num_msix_per to vf->num_msix ==================== Link: https://lore.kernel.org/r/20231205211918.2123019-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Tobias Waldekranz authored
In 4a562127, USXGMII support was added for 6393X, but this was lost in the PCS conversion (the blamed commit), most likely because these efforts where more or less done in parallel. Restore this feature by porting Michal's patch to fit the new implementation. Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Tested-by:
Michal Smulski <michal.smulski@ooma.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: e5b732a2 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs") Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.comSigned-off-by:
-
Eric Dumazet authored
This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 Fixes: 354e4aa3 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Yepeng Pan <yepeng.pan@cispa.de> Reported-by:
Christian Rossow <rossow@cispa.de> Acked-by:
Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.comSigned-off-by:
-
- 06 Dec, 2023 25 commits
-
-
Heiner Kallweit authored
When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e01266 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by:Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.comSigned-off-by:
-
Paolo Abeni authored
Geetha sowjanya says: ==================== octeontx2-af: miscellaneous fixes The series of patches fixes various issues related to mcs and NIX link registers. v3-v4: Used FIELD_PREP macro and proper data types. v2-v3: Fixed typo error in patch 4 commit message. v1-v2: Fixed author name for patch 5. Added Reviewed-by. ==================== Link: https://lore.kernel.org/r/20231205080434.27604-1-gakula@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Rahul Bhansali authored
On new silicons the TX channels for transmit level has increased. This patch fixes the respective register offset range to configure the newly added channels. Fixes: b279bbb3 ("octeontx2-af: NIX Tx scheduler queue config support") Signed-off-by:
Rahul Bhansali <rbhansali@marvell.com> Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
-
Geetha sowjanya authored
If mcs resources are attached to PF/VF. These resources need to be freed on FLR. This patch add missing mcs flr call on PF FLR. Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
-
Geetha sowjanya authored
This patch adds the miss mcs stats register for mcs supported platforms. Fixes: 9312150a ("octeontx2-af: cn10k: mcs: Support for stats collection") Signed-off-by:
-
Geetha sowjanya authored
On latest silicon versions SA cam entries increased to 256. This patch fixes the datatype of sa_entries in mcs_hw_info struct to u16 to hold 256 entries. Fixes: 080bbd19 ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations") Signed-off-by:
-
Nithin Dabilpuram authored
When MCS external bypass is disabled, MCS returns additional 2 credits(32B) for every packet Tx'ed on LMAC. To account for these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT needs to be configured as otherwise NIX Tx credits would overflow and will never be returned to idle state credit count causing issues with credit control and MTU change. This patch fixes the same by configuring CC_MCS_CNT at probe time for MCS enabled SoC's Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Reviewed-by:
-
Paolo Abeni authored
Dmitry Safonov says: ==================== TCP-AO fixes Changes from v4: - Dropped 2 patches on which there's no consensus. They will require more work TBD if they may made acceptable. Those are: o "net/tcp: Allow removing current/rnext TCP-AO keys on TCP_LISTEN sockets" o "net/tcp: Store SNEs + SEQs on ao_info" Changes from v3: - Don't restrict adding any keys on TCP-AO connection in VRF, but only the ones that don't match l3index (David) Changes from v2: - rwlocks are problematic in net code (Paolo) Changed the SNE code to avoid spin/rw locks on RX/TX fastpath by double-accounting SEQ numbers for TCP-AO enabled connections. Changes from v1: - Use tcp_can_repair_sock() helper to limit TCP_AO_REPAIR (Eric) - Instead of hook to listen() syscall, allow removing current/rnext keys on TCP_LISTEN (addressing Eric's objection) - Add sne_lock to protect snd_sne/rcv_sne - Don't move used_tcp_ao in struct tcp_request_sock (Eric) I've been working on TCP-AO key-rotation selftests and as a result exercised some corner-cases that are not usually met in production. Here are a bunch of semi-related fixes: - Documentation typo (reported by Markus Elfring) - Proper alignment for TCP-AO option in TCP header that has MAC length of non 4 bytes (now a selftest with randomized maclen/algorithm/etc passes) - 3 uAPI restricting patches that disallow more things to userspace in order to prevent it shooting itself in any parts of the body - SNEs READ_ONCE()/WRITE_ONCE() that went missing by my human factor - Avoid storing MAC length from SYN header as SYN-ACK will use rnext_key.maclen (drops an extra check that fails on new selftests) ==================== Link: https://lore.kernel.org/r/Signed-off-by:
-
Dmitry Safonov authored
This extra check doesn't work for a handshake when SYN segment has (current_key.maclen != rnext_key.maclen). It could be amended to preserve rnext_key.maclen instead of current_key.maclen, but that requires a lookup on listen socket. Originally, this extra maclen check was introduced just because it was cheap. Drop it and convert tcp_request_sock::maclen into boolean tcp_request_sock::used_tcp_ao. Fixes: 06b22ef2 ("net/tcp: Wire TCP-AO to request sockets") Signed-off-by:
Dmitry Safonov <dima@arista.com> Reviewed-by:
-
Dmitry Safonov authored
If the connection was established, don't allow adding TCP-AO keys that don't match the peer. Currently, there are checks for ip-address matching, but L3 index check is missing. Add it to restrict userspace shooting itself somewhere. Yet, nothing restricts the CAP_NET_RAW user from trying to shoot themselves by performing setsockopt(SO_BINDTODEVICE) or setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection. So, this is just "minimum effort" to potentially save someone's debugging time, rather than a full restriction on doing weird things. Fixes: 248411b8 ("net/tcp: Wire up l3index to TCP-AO") Signed-off-by:
-
Dmitry Safonov authored
Listen socket is not an established TCP connection, so setsockopt(TCP_AO_REPAIR) doesn't have any impact. Restrict this uAPI for listen sockets. Fixes: faadfaba ("net/tcp: Add TCP_AO_REPAIR") Signed-off-by:
-
Dmitry Safonov authored
Currently functions that pre-calculate TCP header options length use unaligned TCP-AO header + MAC-length for skb reservation. And the functions that actually write TCP-AO options into skb do align the header. Nothing good can come out of this for ((maclen % 4) != 0). Provide tcp_ao_len_aligned() helper and use it everywhere for TCP header options space calculations. Fixes: 1e03d32b ("net/tcp: Add TCP-AO sign to outgoing packets") Signed-off-by:
-
Dmitry Safonov authored
Yep, my VIM spellchecker is not good enough for typos like this one. Fixes: 7fe0e38b ("Documentation/tcp: Add TCP-AO documentation") Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Reported-by:
Markus Elfring <Markus.Elfring@web.de> Closes: https://lore.kernel.org/all/2745ab4e-acac-40d4-83bf-37f2600d0c3d@web.de/Signed-off-by:
-
Paolo Abeni authored
Jijie Shao says: ==================== There are some bugfix for the HNS ethernet driver There are some bugfix for the HNS ethernet driver --- changeLog: v2 -> v3: - Refine the commit msg as Wojciech suggestions - Reconstruct the "hns_mac_link_anti_shake" function suggested by Wojciech v2: https://lore.kernel.org/all/20231204011051.4055031-1-shaojijie@huawei.com/ v1 -> v2: - Fixed the internal function is not decorated with static issue, suggested by Jakub v1: https://lore.kernel.org/all/20231201102703.4134592-1-shaojijie@huawei.com/ --- ==================== Link: https://lore.kernel.org/r/20231204143232.3221542-1-shaojijie@huawei.comSigned-off-by:
-
Yonglong Liu authored
If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c ("net: hns: Add ACPI support to check SFP present") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
-
Yonglong Liu authored
Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by:
-
Daniil Maximov authored
If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function, then a timestamp is stored from a packet in a field of skb object, which is not allocated at the moment of the call (skb == NULL). Generalize aq_ptp_extract_ts and other affected functions so they don't work with struct sk_buff*, but with struct skb_shared_hwtstamps*. Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 26efaef7 ("net: atlantic: Implement xdp data plane") Signed-off-by:
Daniil Maximov <daniil31415it@gmail.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.comSigned-off-by:
-
Kelly Kane authored
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by:
Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.comSigned-off-by:
-
Shigeru Yoshida authored
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns true. For example, applications can use PF_PACKET to create a malformed packet with no IP header. This type of packet causes a problem such as uninit-value access. This patch ensures that skb_pull() can pull the required size by checking the skb with pskb_network_may_pull() before skb_pull(). Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: small driver fixes This is a pair of fixes to address a DIM issue and a kernel test robot complaint v1: https://lore.kernel.org/netdev/20231201000519.13363-1-shannon.nelson@amd.com/ ==================== Link: https://lore.kernel.org/r/20231204192234.21017-1-shannon.nelson@amd.comSigned-off-by:
-
Brett Creeley authored
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0 ("ionic: remove intr coalesce update from napi") Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
-
Shannon Nelson authored
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107ca ("ionic: more ionic name tweaks") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/Signed-off-by:
-
Paolo Abeni authored
After the blamed commit below, if the user-space application performs window clamping when tp->rcv_wnd is 0, the TCP socket will never be able to announce a non 0 receive window, even after completely emptying the receive buffer and re-setting the window clamp to higher values. Refactor tcp_set_window_clamp() to address the issue: when the user decreases the current clamp value, set rcv_ssthresh according to the same logic used at buffer initialization, but ensuring reserved mem provisioning. To avoid code duplication factor-out the relevant bits from tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above scenario. When increasing the clamp value, give the rcv_ssthresh a chance to grow according to previously implemented heuristic. Fixes: 3aa7857f ("tcp: enable mid stream window clamp") Reported-by:
David Gibson <david@gibson.dropbear.id.au> Reported-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Dinghao Liu authored
When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d0 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Lorenzo Bianconi authored
Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67d ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.orgSigned-off-by:
-
- 05 Dec, 2023 8 commits
-
-
Jacob Keller authored
In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if blocks. If every single branch of the series of if statements exited, this would be fine. However, the rx_coalesce_usecs is checked against zero to print an informative message if use_adaptive_rx_coalesce is enabled. If this check is true, it short circuits the entire chain of statements, preventing validation of the tx_coalesce_usecs field. Indeed, since commit e792779e ("iavf: Prevent changing static ITR values if adaptive moderation is on") the iavf driver actually rejects any change to the tx_coalesce_usecs or rx_coalesce_usecs when use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making this checking a bit redundant. Fix this error by removing the unnecessary and redundant checks for use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields are already unsigned, remove the minimum value check. This allows assigning an ITR value ranging from 0-8160 as described by the printed message. Fixes: 65e87c03 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Ivan Vecera authored
Commit 3a2c6ced ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: <code> ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... </code> So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced ("i40e: Add a check to see if MFS is set") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Marcin Szycik authored
Fix setting dis_rx_filtering depending on whether port vlan is being turned on or off. This was originally fixed in commit c793f8ea ("ice: Fix disabling Rx VLAN filtering with port VLAN enabled"), but while refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the fix along with the original comment from that change. Also delete duplicate lines in ice_port_vlan_on(). Fixes: 2946204b ("ice: implement bridge port vlan") Reviewed-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
-
Michal Swiatkowski authored
vfs::num_msix_per should be only used as default value for vf->num_msix. For other use cases vf->num_msix should be used, as VF can have different MSI-X amount values. Fix incorrect register index calculation. vfs::num_msix_per and pf->sriov_base_vector shouldn't be used after implementation of changing MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it is storing value for first irq index. Fixes: fe1c5ca2 ("ice: implement num_msix field per VF") Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by:
-
Zhipeng Lu authored
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by:
Zhipeng Lu <alexious@zju.edu.cn> Acked-by:
-
Jianheng Zhang authored
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Jianheng Zhang <Jianheng.Zhang@synopsys.com> Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.comSigned-off-by:
-
Naveen Mamindlapalli authored
The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Thomas Reichinger authored
Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit 5ef216c1 ("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by:
Thomas Reichinger <thomas.reichinger@sohard.de> Fixes: 5ef216c1 ("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.deSigned-off-by:
-
- 04 Dec, 2023 4 commits
-
-
Daniel Borkmann authored
In some potential instances the reference count on struct packet_sock could be saturated and cause overflows which gets the kernel a bit confused. To prevent this, move to a 64-bit atomic reference count on 64-bit architectures to prevent the possibility of this type to overflow. Because we can not handle saturation, using refcount_t is not possible in this place. Maybe someday in the future if it changes it could be used. Also, instead of using plain atomic64_t, use atomic_long_t instead. 32-bit machines tend to be memory-limited (i.e. anything that increases a reference uses so much memory that you can't actually get to 2**32 references). 32-bit architectures also tend to have serious problems with 64-bit atomics. Hence, atomic_long_t is the more natural solution. Reported-by:
"The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk> Co-developed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc55 ("r8152: check if disabling ALDPS is finished") Reviewed-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae32 ("r8152: support new chips") Reviewed-by:
-
