Add multi-buffer support for AF_XDP by extending the XDP multi-buffer
support to be reflected in user-space when a packet is redirected to
an AF_XDP socket.

In the XDP implementation, the NIC driver builds the xdp_buff from the
first frag of the packet and adds any subsequent frags in the skb_shinfo
area of the xdp_buff. In AF_XDP core, XDP buffers are allocated from
xdp_sock's pool and data is copied from the driver's xdp_buff and frags.

Once an allocated XDP buffer is full and there is still data to be
copied, the 'XDP_PKT_CONTD' flag in'options' field of the corresponding
xdp ring descriptor is set and passed to the application. When application
sees the aforementioned flag set it knows there is pending data for this
packet that will be carried in the following descriptors. If there is no
more data to be copied, the flag in 'options' field is cleared for that
descriptor signalling EOP to the application.

If application reads a batch of descriptors using for example the libxdp
interfaces, it is not guaranteed that the batch will end with a full
packet. It might end in the middle of a packet and the rest of the frames
of that packet will arrive at the beginning of the next batch.

AF_XDP ensures that only a complete packet (along with all its frags) is
sent to application.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-6-maciej.fijalkowski@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

If the data in xdp_buff exceeds the xsk frame length, the packet needs
to be dropped. This check is currently being done in __xsk_rcv(). Move
the described logic to xsk_rcv_check() so that such a xdp_buff will
only be dropped if the application does not support multi-buffer
(absence of XDP_USE_SG bind flag). This is applicable for all cases:
copy mode, zero copy mode as well as skb mode.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-5-maciej.fijalkowski@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, __xsk_rcv_zc() is a function that is responsible for
producing AF_XDP Rx descriptors. It is used by both copy and zero-copy
mode. Both of these modes are going to differ when multi-buffer support
is going to be added. ZC will work on a chain of xdp_buff_xsk structs
whereas copy-mode is going to utilize skb_shared_info contents. This
means that ZC-specific changes would affect the copy mode.

Let's modify __xsk_rcv_zc() to work directly on xdp_buff_xsk so the
callsites have to retrieve this from xdp_buff. Also, introduce
xsk_rcv_zc() which will carry all the needed later changes for
supporting multi-buffer on ZC side that do not apply to copy mode.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-4-maciej.fijalkowski@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

As of now xsk core drops any xdp_buff with data size greater than the
xsk frame_size as set by the af_xdp application. With multi-buffer
support introduced in the next patch xsk core can now split those
buffers into multiple descriptors provided the af_xdp application can
handle them. Such capability of the application needs to be independent
of the xdp_prog's frag support capability since there are cases where
even a single xdp_buffer may need to be split into multiple descriptors
owing to a smaller xsk frame size.

For e.g., with NIC rx_buffer size set to 4kB, a 3kB packet will
constitute of a single buffer and so will be sent as such to AF_XDP layer
irrespective of 'xdp.frags' capability of the XDP program. Now if the xsk
frame size is set to 2kB by the AF_XDP application, then the packet will
need to be split into 2 descriptors if AF_XDP application can handle
multi-buffer, else it needs to be dropped.

Applications can now advertise their frag handling capability to xsk core
so that xsk core can decide if it should drop or split xdp_buffs that
exceed xsk frame size. This is done using a new 'XSK_USE_SG' bind flag
for the xdp socket.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-3-maciej.fijalkowski@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Use the 'options' field in xdp_desc as a packet continuity marker. Since
'options' field was unused till now and was expected to be set to 0, the
'eop' descriptor will have it set to 0, while the non-eop descriptors
will have to set it to 1. This ensures legacy applications continue to
work without needing any change for single-buffer packets.

Add helper functions and extend xskq_prod_reserve_desc() to use the
'options' field.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-2-maciej.fijalkowski@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

As Dan Carpenter reported, the variable "first_off" which is passed to
clean_stack_garbage() in save_args() can be uninitialized, which can
cause runtime warnings with KMEMsan. Therefore, init it with 0.

Fixes: 473e3150 ("bpf, x86: allow function arguments up to 12 for TRACING")
Cc: Hao Peng <flyingpeng@tencent.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/09784025-a812-493f-9829-5e26c8691e07@moroto.mountain/Signed-off-by: Menglong Dong <imagedong@tencent.com>
Link: https://lore.kernel.org/r/20230719110330.2007949-1-imagedong@tencent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Anton Protopopov says:

====================
allow bpf_map_sum_elem_count for all program types

This series is a follow up to the recent change [1] which added
per-cpu insert/delete statistics for maps. The bpf_map_sum_elem_count
kfunc presented in the original series was only available to tracing
programs, so let's make it available to all.

The first patch makes types listed in the reg2btf_ids[] array to be
considered trusted by kfuncs.

The second patch allows to treat CONST_PTR_TO_MAP as trusted pointers from
kfunc's point of view by adding it to the reg2btf_ids[] array.

The third patch adds missing const to the map argument of the
bpf_map_sum_elem_count kfunc.

The fourth patch registers the bpf_map_sum_elem_count for all programs,
and patches selftests correspondingly.

  [1] https://lore.kernel.org/bpf/20230705160139.19967-1-aspsk@isovalent.com/

v1 -> v2:
  * treat the whole reg2btf_ids array as trusted (Alexei)
====================

Link: https://lore.kernel.org/r/20230719092952.41202-1-aspsk@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Register the bpf_map_sum_elem_count func for all programs, and update the
map_ptr subtest of the test_progs test to test the new functionality.

The usage is allowed as long as the pointer to the map is trusted (when
using tracing programs) or is a const pointer to map, as in the following
example:

    struct {
            __uint(type, BPF_MAP_TYPE_HASH);
            ...
    } hash SEC(".maps");

    ...

    static inline int some_bpf_prog(void)
    {
            struct bpf_map *map = (struct bpf_map *)&hash;
            __s64 count;

            count = bpf_map_sum_elem_count(map);

            ...
    }
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-5-aspsk@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We use the map pointer only to read the counter values, no locking
involved, so mark the argument as const.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-4-aspsk@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add the BTF id of struct bpf_map to the reg2btf_ids array. This makes the
values of the CONST_PTR_TO_MAP type to be considered as trusted by kfuncs.
This, in turn, allows users to execute trusted kfuncs which accept `struct
bpf_map *` arguments from non-tracing programs.

While exporting the btf_bpf_map_id variable, save some bytes by defining
it as BTF_ID_LIST_GLOBAL_SINGLE (which is u32[1]) and not as BTF_ID_LIST
(which is u32[64]).
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-3-aspsk@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The reg2btf_ids array contains a list of types for which we can (and need)
to find a corresponding static BTF id. All the types in the list can be
considered as trusted for purposes of kfuncs.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-2-aspsk@isovalent.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The code using btf_vmlinux in bpf_tcp_ca is removed by the
commit 9f0265e9 ("bpf: Require only one of cong_avoid() and cong_control() from a TCP CC")
so drop this useless btf_vmlinux declaration.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/4d38da4eadaba476bd92ffcd7a5a03a5e28745c0.1689582557.git.geliang.tang@suse.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update samples/bpf/README.rst to add pahole to the build dependencies
list. Add the reference to "Documentation/process/changes.rst" for
minimum version required so that the version required will not be
outdated in the future.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Link: https://lore.kernel.org/r/aecaf7a2-9100-cd5b-5cf4-91e5dbb2c90d@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Dave Marchevsky says:

====================
BPF Refcount followups 2: owner field

This series adds an 'owner' field to bpf_{list,rb}_node structs, to be
used by the runtime to determine whether insertion or removal operations
are valid in shared ownership scenarios. Both the races which the series
fixes and the fix itself are inspired by Kumar's suggestions in [0].

Aside from insertion and removal having more reasons to fail, there are
no user-facing changes as a result of this series.

* Patch 1 reverts disabling of bpf_refcount_acquire so that the fixed
logic can be exercised by CI. It should _not_ be applied.
* Patch 2 adds internal definitions of bpf_{rb,list}_node so that
their fields are easier to access.
* Patch 3 is the meat of the series - it adds 'owner' field and
enforcement of correct owner to insertion and removal helpers.
* Patch 4 adds a test based on Kumar's examples.
* Patch 5 disables the test until bpf_refcount_acquire is re-enabled.
* Patch 6 reverts disabling of test added in this series
logic can be exercised by CI. It should _not_ be applied.

  [0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2/

Changelog:

v1 -> v2: lore.kernel.org/bpf/20230711175945.3298231-1-davemarchevsky@fb.com/

Patch 2 ("Introduce internal definitions for UAPI-opaque bpf_{rb,list}_node")
  * Rename bpf_{rb,list}_node_internal -> bpf_{list,rb}_node_kern (Alexei)

Patch 3 ("bpf: Add 'owner' field to bpf_{list,rb}_node")
  * WARN_ON_ONCE in __bpf_list_del when node has wrong owner. This shouldn't
    happen, but worth checking regardless (Alexei, offline convo)
  * Continue previous patch's renaming changes
====================

Link: https://lore.kernel.org/r/20230718083813.3416104-1-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The test added in previous patch will fail with bpf_refcount_acquire
disabled. Until all races are fixed and bpf_refcount_acquire is
re-enabled on bpf-next, disable the test so CI doesn't complain.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-6-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds a runnable version of one of the races described by
Kumar in [0]. Specifically, this interleaving:

(rbtree1 and list head protected by lock1, rbtree2 protected by lock2)

Prog A                          Prog B
======================================
n = bpf_obj_new(...)
m = bpf_refcount_acquire(n)
kptr_xchg(map, m)

                                m = kptr_xchg(map, NULL)
                                lock(lock2)
				bpf_rbtree_add(rbtree2, m->r, less)
				unlock(lock2)

lock(lock1)
bpf_list_push_back(head, n->l)
/* make n non-owning ref */
bpf_rbtree_remove(rbtree1, n->r)
unlock(lock1)

The above interleaving, the node's struct bpf_rb_node *r can be used to
add it to either rbtree1 or rbtree2, which are protected by different
locks. If the node has been added to rbtree2, we should not be allowed
to remove it while holding rbtree1's lock.

Before changes in the previous patch in this series, the rbtree_remove
in the second part of Prog A would succeed as the verifier has no way of
knowing which tree owns a particular node at verification time. The
addition of 'owner' field results in bpf_rbtree_remove correctly
failing.

The test added in this patch splits "Prog A" above into two separate BPF
programs - A1 and A2 - and uses a second mapval + kptr_xchg to pass n
from A1 to A2 similarly to the pass from A1 to B. If the test is run
without the fix applied, the remove will succeed.

Kumar's example had the two programs running on separate CPUs. This
patch doesn't do this as it's not necessary to exercise the broken
behavior / validate fixed behavior.

  [0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-5-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

As described by Kumar in [0], in shared ownership scenarios it is
necessary to do runtime tracking of {rb,list} node ownership - and
synchronize updates using this ownership information - in order to
prevent races. This patch adds an 'owner' field to struct bpf_list_node
and bpf_rb_node to implement such runtime tracking.

The owner field is a void * that describes the ownership state of a
node. It can have the following values:

  NULL           - the node is not owned by any data structure
  BPF_PTR_POISON - the node is in the process of being added to a data
                   structure
  ptr_to_root    - the pointee is a data structure 'root'
                   (bpf_rb_root / bpf_list_head) which owns this node

The field is initially NULL (set by bpf_obj_init_field default behavior)
and transitions states in the following sequence:

  Insertion: NULL -> BPF_PTR_POISON -> ptr_to_root
  Removal:   ptr_to_root -> NULL

Before a node has been successfully inserted, it is not protected by any
root's lock, and therefore two programs can attempt to add the same node
to different roots simultaneously. For this reason the intermediate
BPF_PTR_POISON state is necessary. For removal, the node is protected
by some root's lock so this intermediate hop isn't necessary.

Note that bpf_list_pop_{front,back} helpers don't need to check owner
before removing as the node-to-be-removed is not passed in as input and
is instead taken directly from the list. Do the check anyways and
WARN_ON_ONCE in this unexpected scenario.

Selftest changes in this patch are entirely mechanical: some BTF
tests have hardcoded struct sizes for structs that contain
bpf_{list,rb}_node fields, those were adjusted to account for the new
sizes. Selftest additions to validate the owner field are added in a
further patch in the series.

  [0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-4-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Structs bpf_rb_node and bpf_list_node are opaquely defined in
uapi/linux/bpf.h, as BPF program writers are not expected to touch their
fields - nor does the verifier allow them to do so.

Currently these structs are simple wrappers around structs rb_node and
list_head and linked_list / rbtree implementation just casts and passes
to library functions for those data structures. Later patches in this
series, though, will add an "owner" field to bpf_{rb,list}_node, such
that they're not just wrapping an underlying node type. Moreover, the
bpf linked_list and rbtree implementations will deal with these owner
pointers directly in a few different places.

To avoid having to do

  void *owner = (void*)bpf_list_node + sizeof(struct list_head)

with opaque UAPI node types, add bpf_{list,rb}_node_kern struct
definitions to internal headers and modify linked_list and rbtree to use
the internal types where appropriate.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-3-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Luo Jie says:

====================
net: phy: at803x: support qca8081 1G version chip

This patch series add supporting qca8081 1G version chip, the 1G version
chip can be identified by the register mmd7.0x901d bit0.

In addition, qca8081 does not support 1000BaseX mode and the sgmii fifo
reset is added on the link changed, which assert the fifo on the link
down, deassert the fifo on the link up.

Changes in v1:
	* switch to use genphy_c45_pma_read_abilities.
	* remove the patch [remove 1000BaseX mode of qca8081].
	* move the sgmii fifo reset to link_change_notify.

Changes in v2:
	* split the qca8081 1G chip support patch.
	* improve the slave seed config, disable it if master preferred.

Changes in v3:
	* fix the comments.
	* add the help function qca808x_has_fast_retrain_or_slave_seed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The qca8081 sgmii fifo needs to be reset on link down and
released on the link up in case of any abnormal issue
such as the packet blocked on the PHY.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fast retrain and slave seed configs are only applicable when the 2.5G
ability is supported.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qca8081 1G chip version does not support 2.5 capability, which
is distinguished from qca8081 2.5G chip according to the bit0 of
register mmd7.0x901d, the 1G version chip also has the same PHY ID
as the normal qca8081 2.5G chip.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

qca8081 is the single port PHY, the slave prefer mode is used
by default.

if the phy master perfer mode is configured, the slave seed
configuration should not be enabled, since the slave seed
enablement is for making PHY linked as slave mode easily.

disable slave seed if the master mode is preferred.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

merge the seed enablement and seed value configuration into
one function, since the random seed value is needed to be
configured when the seed is enabled.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

qca8081 PHY supports to use genphy_c45_pma_read_abilities for
getting the PHY features supported except for the autoneg ability

but autoneg ability exists in MDIO_STAT1 instead of MMD7.1, add it
manually after calling genphy_c45_pma_read_abilities.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vignesh Viswanathan says:

====================
net: qrtr: Few fixes in QRTR

Add fixes in QRTR ns to change server and nodes radix tree to xarray to
avoid a use-after-free while iterating through the server or nodes
radix tree.

Also fix the destination port value for IPCR control buffer on older
targets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The destination port value in the IPCR control buffer on older
targets is 0xFFFF. Handle the same by updating the dst_port to
QRTR_PORT_CTRL.
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a use after free scenario while iterating through the nodes
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.

Convert the radix tree for nodes to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a use after free scenario while iterating through the servers
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.

Convert the radix tree for servers to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Justin Chen says:

====================
Brcm ASP 2.0 Ethernet Controller

Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with 72165.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add maintainers entry for ASP 2.0 Ethernet driver.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

74165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mdio compat string for ASP 2.0 ethernet driver.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ethernet driver specific stats.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for eth_mac_stats, rmon_stats, and eth_ctrl_stats.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for eee mode.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for wake on network filters. The max match is 256 bytes.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for Wake-On-Lan magic packet and magic packet with password.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with 72165. This controller features two distinct Ethernet
ports that can be independently operated.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a binding document for the Broadcom ASP 2.0 Ethernet
controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>