- 30 Jul, 2020 1 commit
-
-
Dan Murphy authored
The header was updated to align with the data sheet to start the GPO_CFG at GPO_CFG0. The code was not updated to the change and therefore the GPO_CFG0 register was not written to. Fixes: 6617cff6 ("ASoC: tlv320adcx140: Add GPO configuration and drive output config") Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200730142419.28205-1-dmurphy@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 29 Jul, 2020 3 commits
-
-
Dan Murphy authored
Add General Purpose Output (GPO) configuration and driver output configuration. The GPOs can be configured as a GPO, IRQ, SDOUT or a PDMCLK output. In addition the output drive can be configured with various configurations. Signed-off-by:
-
Dan Murphy authored
Add properties for configuring the General Purpose Outputs (GPO). The GPOs. There are 2 settings for each GPO, configuration and the output drive type. Signed-off-by:
-
Dan Murphy authored
Fix white space issues and remove else case where it was not needed. Convert "static const char *" to "static const char * const" Fixes: 689c7655 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by:
-
- 28 Jul, 2020 9 commits
-
-
Mark Brown authored
Revert 5b235b55 ("ASoC: dt-bindings: ak4613: switch to yaml base Documentation") for the time being since it depends on other conversions. Reported-by:
Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Seung-Woo Kim authored
Silence clk_get() error with dev_dbg() on -EPROBE_DEFER. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Link: https://lore.kernel.org/r/1595564371-13692-1-git-send-email-sw0312.kim@samsung.comSigned-off-by:
-
Mark Brown authored
Merge series "SOF Fixes for S0iX suspend/resume sequence" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This set of patches is required for facilitating system S0ix entry when the DSP is in D0I3. This first patch adds the missing CORB/RIRB DMA stop and restart to the suspend/resume sequence along with powering up/down the links. The second patch ensures that the FW traces are disabled when the system enters S0ix with the DSP in D0I3. Marcin Rajwa (2): ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3 sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 4 deletions(-) -- 2.25.1
-
Dan Murphy authored
Convert the TAS2562 text file to yaml format. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200723160838.9738-1-dmurphy@ti.comSigned-off-by:
-
Dan Murphy authored
Update the shutdown GPIO property to be shutdown from shut-down. Fixes: c173dba4 ("ASoC: tas2562: Introduce the TAS2562 amplifier") Signed-off-by:
-
Katsuhiro Suzuki authored
This patch converts Everest Semiconductor ES8316 low power audio CODEC binding to DT schema. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by:
-
Charles Keepax authored
Set the channel number on each AIF widget to allow unused channels not to be powered up across AIFs. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200728144141.16104-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Marcin Rajwa authored
We should always disable DMA trace on S0Ix. When staying at S0-D0I3, we should enable DMA trace while both DMA Trace debug is enabled and hda_enable_trace_D0I3_S0 is set. This commit corrects the existed logic errors about that. Signed-off-by:
Marcin Rajwa <marcin.rajwa@linux.intel.com> Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.comSigned-off-by:
-
Marcin Rajwa authored
This patch fixes the suspend & resume procedure to allow entry into the low power states with some streams being active as a wake source - wake on voice is a perfect example. The current implementation does not stop the CORB/RIRB DMA and does not power down the HDA links. With firmware's help, the platform has been able to still enter s0ix state on older platforms, but the sequence is still incorrect, and the additional driver actions are needed to ensure correct s0ix behaviour. Signed-off-by:
-
- 27 Jul, 2020 5 commits
-
-
Mark Brown authored
Merge series "ASoC: intel: use asoc_substream_to_rtd()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I have posted "ASoC: add asoc_substream_to_rtd() macro" patch-set to ALSA SoC ML (= see Link), and then Pierre-Louis wanted that Intel patch was separated for boards. The patches which are not for Intel were already accepted. This is for Intel, and Intel boards. Link: https://lore.kernel.org/r/87y2nf0yw2.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877duz0ysw.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (2): ASoC: intel/boards: use asoc_substream_to_rtd() ASoC: intel: use asoc_substream_to_rtd() sound/soc/intel/atom/sst-mfld-platform-pcm.c | 6 +++--- sound/soc/intel/baytrail/sst-baytrail-pcm.c | 16 ++++++++-------- sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/bdw-rt5677.c | 4 ++-- sound/soc/intel/boards/broadwell.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/byt-rt5640.c | 2 +- sound/soc/intel/boards/bytcht_da7213.c | 4 ++-- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 2 +- sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5672.c | 2 +- sound/soc/intel/boards/cml_rt1011_rt5682.c | 4 ++-- sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 8 ++++---- sound/soc/intel/boards/kbl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 4 ++-- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 4 ++-- sound/soc/intel/boards/skl_nau88l25_max98357a.c | 2 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +- sound/soc/intel/boards/skl_rt286.c | 2 +- sound/soc/intel/boards/sof_da7219_max98373.c | 2 +- sound/soc/intel/boards/sof_maxim_common.c | 4 ++-- sound/soc/intel/boards/sof_pcm512x.c | 4 ++-- sound/soc/intel/boards/sof_rt5682.c | 4 ++-- sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +- sound/soc/intel/boards/sof_wm8804.c | 2 +- sound/soc/intel/haswell/sst-haswell-pcm.c | 12 ++++++------ sound/soc/intel/keembay/kmb_platform.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 8 ++++---- 34 files changed, 62 insertions(+), 62 deletions(-) -- 2.25.1
-
Stephan Gerhold authored
Right now the direction of a DAI has to be specified as a literal number in the device tree, e.g.: dai@0 { reg = <0>; direction = <2>; }; but this does not make it immediately clear that this is a playback/RX-only DAI. Actually, q6asm-dai.c has useful defines for this. Move them to the dt-bindings header to allow using them in the dts(i) files. The example above then becomes: dai@0 { reg = <0>; direction = <Q6ASM_DAI_RX>; }; which is immediately recognizable as playback/RX-only DAI. Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.netSigned-off-by:
-
Akshu Agrawal authored
PME_EN state needs to restored to the value set by fmw. For the devices which are not using I2S wake event which gets enabled by PME_EN bit, keeping PME_EN enabled burns considerable amount of power as it blocks low power state. For the devices using I2S wake event, PME_EN gets enabled in fmw and the state should be maintained after ACP Power On. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200724195600.11798-1-akshu.agrawal@amd.comSigned-off-by:
-
Kuninori Morimoto authored
Now we can use asoc_substream_to_rtd() macro, let's use it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
Now we can use asoc_substream_to_rtd() macro, let's use it. Signed-off-by:
-
- 24 Jul, 2020 12 commits
-
-
Tzung-Bi Shih authored
runtime_usage of sound card has been observed to grow without bound. For example: $ cat /sys/devices/platform/sound/power/runtime_usage 46 $ sox -n -t s16 -r 48000 -c 2 - synth 1 sine 440 vol 0.1 | \ aplay -q -D hw:0,0 -f S16_LE -r 48000 -c 2 $ cat /sys/devices/platform/sound/power/runtime_usage 52 Commit 4e872a46 ("ASoC: dapm: Don't force card bias level to be updated") stops to force update bias_level on card. If card doesn't provide set_bias_level callback, the snd_soc_dapm_set_bias_level() is equivalent to NOP for card device. As a result, dapm_pre_sequence_async() doesn't change the bias_level of card device correctly. Thus, pm_runtime_get_sync() would be called in dapm_pre_sequence_async() without symmetric pm_runtime_put() in dapm_post_sequence_async(). Don't call pm_runtime_* on card device. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200724070731.451377-1-tzungbi@google.comSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: qcom: Use qcom_snd_parse_of() for apq8016_sbc" from Stephan Gerhold <stephan@gerhold.net>: At the moment we have two separate functions to parse the sound card properties from the device tree: qcom_snd_parse_of() for DPCM and apq8016_sbc_parse_of() without DPCM. These functions are almost identical except for a few minor differences. This patch set extends qcom_snd_parse_of() to handle links without DPCM, so that we can use one common function for all (qcom) machine drivers. Stephan Gerhold (7): ASoC: qcom: Use devm for resource management ASoC: qcom: common: Use snd_soc_dai_link_set_capabilities() ASoC: q6afe: Remove unused q6afe_is_rx_port() function ASoC: qcom: common: Support parsing links without DPCM ASoC: qcom: common: Parse properties with "qcom," prefix ASoC: qcom: apq8016_sbc: Use qcom_snd_parse_of() ASoC: qcom: common: Avoid printing errors for -EPROBE_DEFER sound/soc/qcom/Kconfig | 1 + sound/soc/qcom/apq8016_sbc.c | 120 ++++------------------------------- sound/soc/qcom/apq8096.c | 28 +------- sound/soc/qcom/common.c | 58 ++++++++++------- sound/soc/qcom/qdsp6/q6afe.c | 8 --- sound/soc/qcom/qdsp6/q6afe.h | 1 - sound/soc/qcom/sdm845.c | 40 ++---------- 7 files changed, 59 insertions(+), 197 deletions(-) -- 2.27.0
-
Steve Lee authored
MAX98390_DSM_PARAM_MAX_SIZE is changed to support extended register update. Signed-off-by:
Steve Lee <steves.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20200724085644.9837-1-steves.lee@maximintegrated.comSigned-off-by:
-
Steve Lee authored
Modify dsm_init sequence and dsm param bin check condition. - Move dsm_init() to after amp init setting to make sure dsm init is last setting. - dsm param bin check condition changed for extended register setting. Signed-off-by: -
Jerome Brunet authored
With commit e2329eeb ("ASoC: soc-component: add soc_component_err()") every error different for ENOTSUPP or EPROBE_DEFER will log an error. However, as explained in snd_soc_get_dai_name(), this callback may error to indicate that the DAI is not matched by the component tested. If the device provides other components, those may still match. Logging an error in this case is misleading. Don't use soc_component_ret() in snd_soc_component_of_xlate_dai_name() to avoid spamming the log. Fixes: e2329eeb ("ASoC: soc-component: add soc_component_err()") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200723142020.1338740-1-jbrunet@baylibre.comSigned-off-by:
-
Stephan Gerhold authored
qcom_snd_parse_of() tends to produce lots of error messages during bootup: MultiMedia1: error getting cpu dai name This happens because the DAIs are not probed until the ADSP remoteproc has booted, which takes a while. Until it is ready, snd_soc_of_get_dai_name() returns -EDEFER_PROBE to retry probing later. This is perfectly normal, so cleanup the kernel log a bit by not printing in case of -EPROBE_DEFER. Signed-off-by:
-
Stephan Gerhold authored
Now that we have updated qcom_snd_parse_of() to handle the device tree bindings used for apq8016_sbc, update the apq8016_sbc driver to use the common function and remove the duplicated code. Signed-off-by:
-
Stephan Gerhold authored
The apq8016_sbc device tree binding uses a "qcom," vendor prefix for all device tree properties, while qcom_snd_parse_of() uses the same properties without a prefix. In the future it would be nice to make this consistent, however, for backwards compatibility we need to parse both names to allow apq8016_sbc to use the common qcom_snd_parse_of() function. Signed-off-by:
-
Stephan Gerhold authored
So far qcom_snd_parse_of() was only used to parse the device tree for boards using the QDSP6 driver together with DPCM. apq8016_sbc uses an almost identical version (apq8016_sbc_parse_of()) which parses links without DPCM. Given the similarity of the two functions it is useful to combine these two. To allow using qcom_snd_parse_of() in apq8016_sbc we need to support parsing links without DPCM as well. This is pretty simple: A DPCM link in the device tree is defined using: - DPCM frontend: "cpu" - DPCM backend: "cpu", "platform" and "codec" ... while a link without DPCM has "cpu" and "codec" (but no "platform"). Add a few more if conditions to handle links without DPCM correctly. Signed-off-by:
-
Stephan Gerhold authored
This reverts commit 4a957374 ("ASoc: q6afe: add support to get port direction"), since the function is not needed anymore. q6afe-dai already exposes the possible directions for a DAI through the DAI capabilities (playback/capture-only DAI). Now we use snd_soc_dai_link_set_capabilities() to infer the information directly from the DAI capabilities. Signed-off-by:
-
Stephan Gerhold authored
Commit a2120089 ("ASoC: qcom: common: set correct directions for dailinks") introduced a call to q6afe_is_rx_port() to set the dpcm_playback/capture parameters correctly. This is necessary because those parameters are now validated to match the capabilities of the DAIs. [1] The disadvantage of introducing the call to q6afe_is_rx_port() is that it makes the qcom_snd_parse_of() helper dependent on the QDSP6 driver. When the ADSP is bypassed (e.g. in apq8016-sbc) QDSP6 is not used. There is a generic solution for this now: The correct direction for the links is already defined by the DAI capabilities (e.g. rx ports only support playback). Commit 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") introduced the snd_soc_dai_link_set_capabilities() function that we can use to set dpcm_playback/dpcm_capture according to the capabilities of the DAIs. Use that for both FE/BE DAI links to avoid the dependency on the QDSP6 driver. [1]: https://lore.kernel.org/alsa-devel/20200616085409.GA110999@gerhold.net/Signed-off-by:
-
Stephan Gerhold authored
Simplify the machine drivers for newer SoCs a bit by using the devm_* function calls that automatically release the resources when the driver is removed or when probing fails. Signed-off-by:
-
- 23 Jul, 2020 10 commits
-
-
Mark Brown authored
Merge series "ASoC: add asoc_substream_to_rtd() macro" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Many ASoC drivers are getting rtd from substream by rtd = substream->private_data OTOH, we have snd_pcm_substream_chip() macro for it. #define snd_pcm_substream_chip(substream) ((substream)->private_data) But, both are not understandable for reader. This patch adds new asoc_substream_to_rtd() which is easy to understand. These are not important, but for readable code. Kuninori Morimoto (29): ASoC: soc-xxx: add asoc_substream_to_rtd() ASoC: ux500: use asoc_substream_to_rtd() ASoC: ti: use asoc_substream_to_rtd() ASoC: tegra: use asoc_substream_to_rtd() ASoC: sunxi: use asoc_substream_to_rtd() ASoC: stm: use asoc_substream_to_rtd() ASoC: sof: use asoc_substream_to_rtd() ASoC: sh: use asoc_substream_to_rtd() ASoC: samsung: use asoc_substream_to_rtd() ASoC: pxa: use asoc_substream_to_rtd() ASoC: cirrus: use asoc_substream_to_rtd() ASoC: rockchip: use asoc_substream_to_rtd() ASoC: amd: use asoc_substream_to_rtd() ASoC: fsl: use asoc_substream_to_rtd() ASoC: mediatek: use asoc_substream_to_rtd() ASoC: atmel: use asoc_substream_to_rtd() ASoC: qcom: use asoc_substream_to_rtd() ASoC: dwc: use asoc_substream_to_rtd() ASoC: intel: use asoc_substream_to_rtd() ASoC: meson: use asoc_substream_to_rtd() ASoC: au1x: use asoc_substream_to_rtd() ASoC: bcm: use asoc_substream_to_rtd() ASoC: codecs: use asoc_substream_to_rtd() ASoC: generic: use asoc_substream_to_rtd() ASoC: sprd: use asoc_substream_to_rtd() ASoC: kirkwood: use asoc_substream_to_rtd() ASoC: xtensa: use asoc_substream_to_rtd() ASoC: mxs: use asoc_substream_to_rtd() ASoC: uniphier: use asoc_substream_to_rtd() include/sound/soc.h | 2 + sound/soc/amd/acp-da7219-max98357a.c | 12 ++-- sound/soc/amd/acp-pcm-dma.c | 2 +- sound/soc/amd/acp-rt5645.c | 2 +- sound/soc/amd/acp3x-rt5682-max9836.c | 8 +-- sound/soc/amd/raven/acp3x-i2s.c | 2 +- sound/soc/amd/raven/acp3x-pcm-dma.c | 6 +- sound/soc/atmel/atmel-classd.c | 8 +-- sound/soc/atmel/atmel-pcm-dma.c | 4 +- sound/soc/atmel/atmel-pcm-pdc.c | 2 +- sound/soc/atmel/atmel-pdmic.c | 10 +-- sound/soc/atmel/atmel_wm8904.c | 2 +- sound/soc/au1x/db1200.c | 2 +- sound/soc/au1x/dbdma2.c | 2 +- sound/soc/au1x/dma.c | 2 +- sound/soc/bcm/bcm63xx-pcm-whistler.c | 12 ++-- sound/soc/bcm/cygnus-pcm.c | 16 ++--- sound/soc/cirrus/edb93xx.c | 2 +- sound/soc/cirrus/snappercl15.c | 2 +- sound/soc/codecs/rt5677-spi.c | 4 +- sound/soc/dwc/dwc-pcm.c | 2 +- sound/soc/fsl/eukrea-tlv320.c | 2 +- sound/soc/fsl/fsl-asoc-card.c | 2 +- sound/soc/fsl/fsl_asrc_dma.c | 4 +- sound/soc/fsl/fsl_dma.c | 2 +- sound/soc/fsl/fsl_spdif.c | 10 +-- sound/soc/fsl/fsl_ssi.c | 8 +-- sound/soc/fsl/imx-audmix.c | 6 +- sound/soc/fsl/imx-mc13783.c | 2 +- sound/soc/fsl/mpc5200_dma.c | 8 +-- sound/soc/fsl/mpc5200_psc_i2s.c | 2 +- sound/soc/fsl/mpc8610_hpcd.c | 2 +- sound/soc/fsl/mx27vis-aic32x4.c | 2 +- sound/soc/fsl/p1022_ds.c | 2 +- sound/soc/fsl/p1022_rdk.c | 2 +- sound/soc/fsl/wm1133-ev1.c | 2 +- sound/soc/generic/simple-card-utils.c | 6 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 6 +- sound/soc/intel/baytrail/sst-baytrail-pcm.c | 16 ++--- sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/bdw-rt5677.c | 4 +- sound/soc/intel/boards/broadwell.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/byt-rt5640.c | 2 +- sound/soc/intel/boards/bytcht_da7213.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 2 +- sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5672.c | 2 +- sound/soc/intel/boards/cml_rt1011_rt5682.c | 4 +- sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 8 +-- sound/soc/intel/boards/kbl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 4 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 4 +- .../soc/intel/boards/skl_nau88l25_max98357a.c | 2 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +- sound/soc/intel/boards/skl_rt286.c | 2 +- sound/soc/intel/boards/sof_da7219_max98373.c | 2 +- sound/soc/intel/boards/sof_maxim_common.c | 4 +- sound/soc/intel/boards/sof_pcm512x.c | 4 +- sound/soc/intel/boards/sof_rt5682.c | 4 +- sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +- sound/soc/intel/boards/sof_wm8804.c | 2 +- sound/soc/intel/haswell/sst-haswell-pcm.c | 12 ++-- sound/soc/intel/keembay/kmb_platform.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 8 +-- sound/soc/kirkwood/armada-370-db.c | 2 +- sound/soc/mediatek/common/mtk-afe-fe-dai.c | 12 ++-- .../mediatek/common/mtk-afe-platform-driver.c | 2 +- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 2 +- sound/soc/mediatek/mt2701/mt2701-cs42448.c | 2 +- sound/soc/mediatek/mt2701/mt2701-wm8960.c | 2 +- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 4 +- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +- sound/soc/mediatek/mt8173/mt8173-max98090.c | 2 +- .../mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +- .../mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 +- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 +- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 4 +- .../mediatek/mt8183/mt8183-da7219-max98357.c | 8 +-- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 12 ++-- sound/soc/meson/axg-card.c | 2 +- sound/soc/meson/gx-card.c | 2 +- sound/soc/meson/meson-card-utils.c | 2 +- sound/soc/meson/meson-codec-glue.c | 2 +- sound/soc/mxs/mxs-sgtl5000.c | 2 +- sound/soc/pxa/brownstone.c | 2 +- sound/soc/pxa/corgi.c | 4 +- sound/soc/pxa/hx4700.c | 2 +- sound/soc/pxa/imote2.c | 2 +- sound/soc/pxa/magician.c | 6 +- sound/soc/pxa/mmp-pcm.c | 2 +- sound/soc/pxa/poodle.c | 4 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/spitz.c | 4 +- sound/soc/pxa/tosa.c | 2 +- sound/soc/pxa/z2.c | 2 +- sound/soc/pxa/zylonite.c | 2 +- sound/soc/qcom/apq8096.c | 2 +- sound/soc/qcom/lpass-platform.c | 14 ++--- sound/soc/qcom/qdsp6/q6asm-dai.c | 6 +- sound/soc/qcom/qdsp6/q6routing.c | 2 +- sound/soc/qcom/sdm845.c | 14 ++--- sound/soc/qcom/storm.c | 2 +- sound/soc/rockchip/rk3288_hdmi_analog.c | 2 +- sound/soc/rockchip/rk3399_gru_sound.c | 8 +-- sound/soc/rockchip/rockchip_i2s.c | 2 +- sound/soc/rockchip/rockchip_max98090.c | 2 +- sound/soc/rockchip/rockchip_rt5645.c | 2 +- sound/soc/samsung/aries_wm8994.c | 4 +- sound/soc/samsung/arndale.c | 4 +- sound/soc/samsung/h1940_uda1380.c | 2 +- sound/soc/samsung/i2s.c | 2 +- sound/soc/samsung/jive_wm8750.c | 2 +- sound/soc/samsung/littlemill.c | 2 +- sound/soc/samsung/neo1973_wm8753.c | 8 +-- sound/soc/samsung/odroid.c | 6 +- sound/soc/samsung/pcm.c | 4 +- sound/soc/samsung/rx1950_uda1380.c | 2 +- sound/soc/samsung/s3c-i2s-v2.c | 2 +- sound/soc/samsung/s3c24xx_simtec.c | 2 +- sound/soc/samsung/s3c24xx_uda134x.c | 6 +- sound/soc/samsung/smartq_wm8987.c | 2 +- sound/soc/samsung/smdk_spdif.c | 2 +- sound/soc/samsung/smdk_wm8580.c | 2 +- sound/soc/samsung/smdk_wm8994.c | 2 +- sound/soc/samsung/smdk_wm8994pcm.c | 2 +- sound/soc/samsung/snow.c | 2 +- sound/soc/samsung/spdif.c | 6 +- sound/soc/samsung/tm2_wm5110.c | 8 +-- sound/soc/sh/dma-sh7760.c | 12 ++-- sound/soc/sh/fsi.c | 2 +- sound/soc/sh/migor.c | 4 +- sound/soc/sh/rcar/core.c | 4 +- sound/soc/soc-component.c | 20 +++--- sound/soc/soc-dai.c | 8 +-- sound/soc/soc-dapm.c | 6 +- sound/soc/soc-generic-dmaengine-pcm.c | 4 +- sound/soc/soc-link.c | 12 ++-- sound/soc/soc-pcm.c | 62 +++++++++---------- sound/soc/soc-utils.c | 2 +- sound/soc/sof/intel/hda-dai.c | 10 +-- sound/soc/sof/intel/hda-dsp.c | 2 +- sound/soc/sof/intel/hda-pcm.c | 2 +- sound/soc/sof/pcm.c | 18 +++--- sound/soc/sprd/sprd-pcm-dma.c | 2 +- sound/soc/stm/stm32_adfsdm.c | 12 ++-- sound/soc/stm/stm32_sai_sub.c | 2 +- sound/soc/sunxi/sun4i-codec.c | 12 ++-- sound/soc/sunxi/sun4i-spdif.c | 2 +- sound/soc/tegra/tegra_alc5632.c | 2 +- sound/soc/tegra/tegra_max98090.c | 2 +- sound/soc/tegra/tegra_rt5640.c | 2 +- sound/soc/tegra/tegra_rt5677.c | 2 +- sound/soc/tegra/tegra_sgtl5000.c | 2 +- sound/soc/tegra/tegra_wm8753.c | 2 +- sound/soc/tegra/tegra_wm8903.c | 2 +- sound/soc/tegra/trimslice.c | 2 +- sound/soc/ti/davinci-evm.c | 6 +- sound/soc/ti/davinci-vcif.c | 4 +- sound/soc/ti/j721e-evm.c | 6 +- sound/soc/ti/n810.c | 4 +- sound/soc/ti/omap-abe-twl6040.c | 4 +- sound/soc/ti/omap-mcbsp.c | 4 +- sound/soc/ti/omap-twl4030.c | 2 +- sound/soc/ti/omap3pandora.c | 2 +- sound/soc/ti/osk5912.c | 2 +- sound/soc/ti/rx51.c | 4 +- sound/soc/uniphier/aio-dma.c | 6 +- sound/soc/ux500/mop500_ab8500.c | 8 +-- sound/soc/ux500/ux500_pcm.c | 2 +- sound/soc/xtensa/xtfpga-i2s.c | 2 +- 177 files changed, 397 insertions(+), 395 deletions(-) -- 2.25.1
-
Katsuhiro Suzuki authored
This patch converts ROHM BD28623UMV class D speaker amplifier binding to DT schema. Signed-off-by:
-
Shengjiu Wang authored
In order to support configuring dai fmt through DT, add some properties. These properiese are same as the properties in simple card. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1595302910-19688-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Support same propeties as simple card for configuring fmt from DT. In order to make this change compatible with old DT, these properties are optional. Signed-off-by:
-
Shengjiu Wang authored
ESAI interfaces may share same interrupt line with EDMA on some platforms (e.g. i.MX8QXP, i.MX8QM). Add IRQF_SHARED flag to allow sharing the irq among several devices Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Acked-by:
-
Sameer Pujar authored
Build errors are seen on 32-bit platforms because of a plain 64-by-32 division. For example, following build erros were reported. "ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko] undefined!" "ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko] undefined!" This can be fixed by using div_u64() helper from 'math64.h' header. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.comSigned-off-by:
-
Randy Dunlap authored
SND_SOC_J721E_EVM should not select SND_SOC_PCM3168A_I2C when I2C is not enabled. That causes build errors, so make this driver's symbol depend on I2C. WARNING: unmet direct dependencies detected for SND_SOC_PCM3168A_I2C Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n] Selected by [m]: - SND_SOC_J721E_EVM [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (DMA_OMAP [=y] || TI_EDMA [=m] || TI_K3_UDMA [=n] || COMPILE_TEST [=y]) && (ARCH_K3_J721E_SOC [=n] || COMPILE_TEST [=y]) ../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: data definition has no type or storage class module_i2c_driver(pcm3168a_i2c_driver); ^~~~~~~~~~~~~~~~~ ../sound/soc/codecs/pcm3168a-i2c.c:59:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] ../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: parameter names (without types) in function declaration ../sound/soc/codecs/pcm3168a-i2c.c:49:26: warning: ‘pcm3168a_i2c_driver’ defined but not used [-Wunused-variable] static struct i2c_driver pcm3168a_i2c_driver = { ^~~~~~~~~~~~~~~~~~~ cc1: some warnings being treated as errors Fixes: 6748d055 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)") Signed-off-by:Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/e74c690c-c7f8-fd42-e461-4f33571df4ef@infradead.orgSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718112403.13709-1-grandmaster@al2klimov.deSigned-off-by:
-
James Schulman authored
Coefficient files now support additional metadata blocks, these contain machine parsable text strings describing the parameters contained in the coefficient file. Signed-off-by:
James Schulman <james.schulman@cirrus.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:
-
