Pull a hwmon fix from Guenter Roeck:
 "One patch with section conflict fixes."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  sections: Fix section conflicts in drivers/hwmon

Pull spi fixes from Mark Brown:
 "Grant is still away so another pull request with some fairly minor
  fixes, the most notable of which are several fixes for some common
  error patterns with the reference counting spi_master_get/put do."

* tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions
  spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function
  spi/pl022: fix spi-pl022 pm enable at probe
  spi/bcm63xx: Ensure that memory is freed only after it is no longer used
  spi: omap2-mcspi: Fix the error handling in probe
  spi/s3c64xx: Add missing static storage class specifiers

Pull regulator fixes from Mark Brown:
 "A bunch of fixes which are a combination of minor fixes that have been
  shaken down due to greater testing exposure, the biggest block of
  which are for the Palmas driver which hadn't had all the changes
  required for mainline properly tested when it was merged."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl-regulator: fix up VINTANA1/VINTANA2
  regulator: core: request only valid gpio pins for regulator enable
  regulator: twl: Remove references to the twl4030 regulator
  regulator: gpio-regulator: Split setting of voltages and currents
  regulator: ab3100: add missing voltage table
  regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel
  regulator: tps6586x: correct vin pin for sm0/sm1/sm2
  regulator: palmas: Fix palmas_probe error handling
  regulator: palmas: Call palmas_ldo_[read|write] in palmas_ldo_init
  regulator: palmas: Fix regmap offsets for PALMAS_REG_SMPS10 vsel_reg
  regulator: palmas: Fix calculating selector in palmas_map_voltage_ldo

Pull IOMMU fixes from Joerg Roedel:
 "Two fixes are necessary.  One patch fixes a boot crash on MacBook Air
  with interrupt remapping enabled and the other patch fixes a
  regression (which causes a boot crash on AMD IOMMUv2 systems too) in
  the init code of the AMD IOMMU driver."

* tag 'iommu-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix wrong check for ARRAY_SIZE()
  irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU

Pull x86 fixes from Ingo Molnar.

A x32 socket ABI fix with a -stable backport tag among other fixes.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x32: Use compat shims for {g,s}etsockopt
  Revert "x86-64/efi: Use EFI to deal with platform wall clock"
  x86, apic: fix broken legacy interrupts in the logical apic mode
  x86, build: Globally set -fno-pic
  x86, avx: don't use avx instructions with "noxsave" boot param

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix migration thread runtime bogosity
  sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
  sched,cgroup: Fix up task_groups list
  sched: fix divide by zero at {thread_group,task}_times
  sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies

Pull x86 perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: disable PEBS on a guest entry.
  perf/x86: Add Intel Westmere-EX uncore support
  perf/x86: Fixes for Nehalem-EX uncore driver
  perf, x86: Fix uncore_types_exit section mismatch

Pull a mutex fix from Ingo Molnar.

Fix the fastpath_lock failure contention flag for xchg-based mutexes.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Place lock in contended state after fastpath_lock failure

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge alpha architecture update from Michael Cree:
 "The Alpha Maintainer, Matt Turner, is currently unavailable, so I have
  collected up patches that have been posted to the linux-alpha mailing
  list over the last couple of months, and are forwarding them to you in
  the hope that you are prepared to accept them via me.

  The patches by Al Viro and myself I have been running against kernels
  for two months now so have had quite a bit of testing.  All except one
  patch were intended for the 3.5 kernel but because of Matt's
  unavailability never got forwarded to you."

* emailed patches from Michael Cree <mcree@orcon.net.nz>: (9 commits)
  alpha: Fix fall-out from disintegrating asm/system.h
  Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
  alpha: fix fpu.h usage in userspace
  alpha/mm/fault.c: Port OOM changes to do_page_fault
  alpha: take kernel_execve() out of entry.S
  alpha: take a bunch of syscalls into osf_sys.c
  alpha: Use new generic strncpy_from_user() and strnlen_user()
  alpha: Wire up cross memory attach syscalls
  alpha: Don't export SOCK_NONBLOCK to user space.

Commit ec221208 ("Disintegrate asm/system.h for Alpha") removed
asm/system.h however arch/alpha/oprofile/common.c requires definitions
that were shifted from asm/system.h to asm/special_insns.h.  Include
that.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following build error occurred during an alpha build:

  net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit ec221208 ("Disintegrate asm/system.h for Alpha"), the
fpu.h header which we install for userland started depending on
special_insns.h which is not installed.

However, fpu.h only uses that for __KERNEL__ code, so protect the
inclusion the same way to avoid build breakage in glibc:

  /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory

Cc: stable@vger.kernel.org
Reported-by: Matt Turner <mattst88@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit d065bd81 ("mm: retry page fault when blocking on disk
transfer") and 37b23e05 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.

Port these changes to ALPHA.
Signed-off-by: Mohd. Faris <mohdfarisq2010@gmail.com>
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

New helper: current_thread_info().  Allows to do a bunch of odd syscalls
in C. While we are at it, there had never been a reason to do
osf_getpriority() in assembler.  We also get "namespace"-aware (read:
consistent with getuid(2), etc.) behaviour from getx?id() syscalls now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to x86/sparc/powerpc implementations except:
1) we implement an extremely efficient has_zero()/find_zero()
   sequence with both prep_zero_mask() and create_zero_mask()
   no-operations.
2) Our output from prep_zero_mask() differs in that only the
   lowest eight bits are used to represent the zero bytes
   nevertheless it can be safely ORed with other similar masks
   from prep_zero_mask() and forms input to create_zero_mask(),
   the two fundamental properties prep_zero_mask() must satisfy.

Tests on EV67 and EV68 CPUs revealed that the generic code is
essentially as fast (to within 0.5% of CPU cycles) of the old
Alpha specific code for large quadword-aligned strings, despite
the 30% extra CPU instructions executed.  In contrast, the
generic code for unaligned strings is substantially slower (by
more than a factor of 3) than the old Alpha specific code.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add sys_process_vm_readv and sys_process_vm_writev to Alpha.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:
 "The largest thing in this set of changes is bringing back some of the
  ARMv3 code to fix a compile problem noticed on RiscPC, which we still
  support, even though we only support ARMv4 there.

  (The reason is that the system bus doesn't support ARMv4 half-word
  accesses, so we need the ARMv3 library code for this platform.)

  The rest are all quite minor fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE
  ARM: Bring back ARMv3 IO and user access code
  ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems
  ARM: 7488/1: mm: use 5 bits for swapfile type encoding
  ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present
  ARM: 7486/1: sched_clock: update epoch_cyc on resume
  ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks
  ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled
  ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull power management fixes from Rafael J. Wysocki:
  - Fixes for three obscure problems in the runtime PM core code found
   recently.
 - Two fixes for the new "coupled" cpuidle code from Colin Cross and Jon
   Medhurst.
 - intel_idle driver fix from Konrad Rzeszutek Wilk.

* tag 'pm-for-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it.
  cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify
  cpuidle: coupled: fix sleeping while atomic in cpu notifier
  PM / Runtime: Check device PM QoS setting before "no callbacks" check
  PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()
  PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set

Some of the arguments to {g,s}etsockopt are passed in userland pointers.
If we try to use the 64bit entry point, we end up sometimes failing.

For example, dhcpcd doesn't run in x32:
	# dhcpcd eth0
	dhcpcd[1979]: version 5.5.6 starting
	dhcpcd[1979]: eth0: broadcasting for a lease
	dhcpcd[1979]: eth0: open_socket: Invalid argument
	dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor

The code in particular is getting back EINVAL when doing:
	struct sock_fprog pf;
	setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf));

Diving into the kernel code, we can see:
include/linux/filter.h:
	struct sock_fprog {
		unsigned short len;
		struct sock_filter __user *filter;
	};

net/core/sock.c:
	case SO_ATTACH_FILTER:
		ret = -EINVAL;
		if (optlen == sizeof(struct sock_fprog)) {
			struct sock_fprog fprog;

			ret = -EFAULT;
			if (copy_from_user(&fprog, optval, sizeof(fprog)))
				break;

			ret = sk_attach_filter(&fprog, sk);
		}
		break;

arch/x86/syscalls/syscall_64.tbl:
	54 common setsockopt sys_setsockopt
	55 common getsockopt sys_getsockopt

So for x64, sizeof(sock_fprog) is 16 bytes.  For x86/x32, it's 8 bytes.
This comes down to the pointer being 32bit for x32, which means we need
to do structure size translation.  But since x32 comes in directly to
sys_setsockopt, it doesn't get translated like x86.

After changing the syscall table and rebuilding glibc with the new kernel
headers, dhcp runs fine in an x32 userland.

Oddly, it seems like Linus noted the same thing during the initial port,
but I guess that was missed/lost along the way:
	https://lkml.org/lkml/2011/8/26/452

[ hpa: tagging for -stable since this is an ABI fix. ]

Bugzilla: https://bugs.gentoo.org/423649Reported-by: Mads <mads@ab3.no>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org
Cc: H. J. Lu <hjl.tools@gmail.com>
Cc: <stable@vger.kernel.org> v3.4..v3.5
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Pull vfs fixes from Miklos Szeredi.

This mainly fixes some confusion about whether the open 'mode' variable
passed around should contain the full file type (S_IFREG etc)
information or just the permission mode.  In particular, the lack of
proper file type information had confused fuse.

* 'vfs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  vfs: fix propagation of atomic_open create error on negative dentry
  fuse: check create mode in atomic open
  vfs: pass right create mode to may_o_create()
  vfs: atomic_open(): fix create mode usage
  vfs: canonicalize create mode in build_open_flags()

Pull md fixes from NeilBrown:
 "2 fixes for md, tagged for -stable"

* tag 'md-3.6-fixes' of git://neil.brown.name/md:
  md/raid10: fix problem with on-stack allocation of r10bio structure.
  md: Don't truncate size at 4TB for RAID0 and Linear

A 'struct r10bio' has an array of per-copy information at the end.
This array is declared with size [0] and r10bio_pool_alloc allocates
enough extra space to store the per-copy information depending on the
number of copies needed.

So declaring a 'struct r10bio on the stack isn't going to work.  It
won't allocate enough space, and memory corruption will ensue.

So in the two places where this is done, declare a sufficiently large
structure and use that instead.

The two call-sites of this bug were introduced in 3.4 and 3.5
so this is suitable for both those kernels.  The patch will have to
be modified for 3.4 as it only has one bug.

Cc: stable@vger.kernel.org
Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com>
Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

Suspend and resume functions call spi_master_get() without matching
spi_master_put(). The extra references are unnecessary and cause
subsequent module unload attempts to fail, so drop the calls.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is
complete; it reduces the device reference count to zero, which and results in
device memory being freed. The subsequent call to spi_master_put is unnecessary
and results in an access to free memory. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

amba drivers does not need to enable pm runtime at probe.
amba_probe already enables pm runtime.

This rids this warning in the ux500 boot log:
ssp-pl022 ssp0: Unbalanced pm_runtime_enable!
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Pull infiniband/rdma fixes from Roland Dreier:
 "Grab bag of InfiniBand/RDMA fixes:
   - IPoIB fixes for regressions introduced by path database conversion
   - mlx4 fixes for bugs with large memory systems and regressions from
     SR-IOV patches
   - RDMA CM fix for passing bad event up to userspace
   - Other minor fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Check iboe netdev pointer before dereferencing it
  mlx4_core: Clean up buddy bitmap allocation
  mlx4_core: Fix integer overflow issues around MTT table
  mlx4_core: Allow large mlx4_buddy bitmaps
  IB/srp: Fix a race condition
  IB/qib: Fix error return code in qib_init_7322_variables()
  IB: Fix typos in infiniband drivers
  IB/ipoib: Fix RCU pointer dereference of wrong object
  IB/ipoib: Add missing locking when CM object is deleted
  RDMA/ucma.c: Fix for events with wrong context on iWARP
  RDMA/ocrdma: Don't call vlan_dev_real_dev() for non-VLAN netdevs
  IB/mlx4: Fix possible deadlock on sm_lock spinlock

Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 4 tiny patches, each fixing a serial driver problem that
  people have reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pmac_zilog,kdb: Fix console poll hook to return instead of loop
  serial: mxs-auart: fix the wrong RTS hardware flow control
  serial: ifx6x60: fix paging fault on spi_register_driver
  serial: Change Kconfig entry for CLPS711X-target

If the machine is booted without any cpu_idle driver set
(b/c disable_cpuidle() has been called) we should follow
other users of cpu_idle API and check the return value
for NULL before using it.
Reported-and-tested-by: Mark van Dijk <mark@internecto.net>
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

When a kernel is built to support multiple hardware types it's possible
that CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is set but the hardware the
kernel is run on doesn't support cpuidle and therefore doesn't load a
driver for it. In this case, when the system is shut down,
cpuidle_coupled_cpu_notify() gets called with cpuidle_devices set to
NULL. There are quite possibly other circumstances where this
situation can also occur and we should check for it.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The cpu hotplug notifier gets called in both atomic and non-atomic
contexts, it is not always safe to lock a mutex.  Filter out all events
except the six necessary ones, which are all sleepable, before taking
the mutex.
Signed-off-by: Colin Cross <ccross@android.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

If __dev_pm_qos_read_value(dev) returns a negative value,
rpm_suspend() should return -EPERM for dev even if its
power.no_callbacks flag is set.  For this to happen, the device's
power.no_callbacks flag has to be checked after the PM QoS check,
so move the PM QoS check to rpm_check_suspend_allowed() (this will
make it cover idle notifications as well as runtime suspend too).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org

The power.deferred_resume can only be set if the runtime PM status
of device is RPM_SUSPENDING and it should be cleared after its
status has been changed, regardless of whether or not the runtime
suspend has been successful.  However, it only is cleared on
suspend failure, while it may remain set on successful suspend and
is happily leaked to rpm_resume() executed in that case.

That shouldn't happen, so if power.deferred_resume is set in
rpm_suspend() after the status has been changed to RPM_SUSPENDED,
clear it before calling rpm_resume().  Then, it doesn't need to be
cleared before changing the status to RPM_SUSPENDING any more,
because it's always cleared after the status has been changed to
either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org

For devices whose power.no_callbacks flag is set, rpm_resume()
should return 1 if the device's parent is already active, so that
the callers of pm_runtime_get() don't think that they have to wait
for the device to resume (asynchronously) in that case (the core
won't queue up an asynchronous resume in that case, so there's
nothing to wait for anyway).

Modify the code accordingly (and make sure that an idle notification
will be queued up on success, even if 1 is to be returned).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org

Pull staging fixes from Greg Kroah-Hartman:
 "Here are some staging driver fixes (and iio driver fixes, they get
  lumped in with the staging stuff due to dependancies) for your 3.6-rc3
  tree.

  Nothing major, just a bunch of fixes that people have reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (26 commits)
  iio: lm3533-als: Fix build warnings
  staging:iio:ad7780: Mark channels as unsigned
  staging:iio:ad7192: Report offset and scale for temperature channel
  staging:iio:ad7192: Report channel offset
  staging:iio:ad7192: Mark channels as unsigned
  staging:iio:ad7192: Fix setting ACX
  staging:iio:ad7192: Add missing break in switch statement
  staging:iio:ad7793: Fix internal reference value
  staging:iio:ad7793: Follow new IIO naming spec
  staging:iio:ad7793: Fix temperature scale and offset
  staging:iio:ad7793: Report channel offset
  staging:iio:ad7793: Mark channels as unsigned
  staging:iio:ad7793: Add missing break in switch statement
  iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode()
  iio: frequency: ADF4350: Fix potential reference div factor overflow.
  iio: staging: ad7298_ring: Fix maybe-uninitialized warning
  staging: comedi: usbduxfast: Declare MODULE_FIRMWARE usage
  staging: comedi: usbdux: Declare MODULE_FIRMWARE usage
  staging: comedi: usbduxsigma: Declare MODULE_FIRMWARE usage
  staging: csr: add INET dependancy
  ...

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are two tiny patches, one fixing a dynamic debug problem that the
  printk rework turned up, and the other one fixing an extcon problem
  that people reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  extcon: extcon_gpio: Replace gpio_request_one by devm_gpio_request_one
  drivers-core: make structured logging play nice with dynamic-debug

Pull Char / Misc driver fixes from Greg Kroah-Hartman:
 "Here are some small misc and w1 driver fixes for 3.6-rc3.  Nothing
  major, just some some bugfixes and a new device id for a w1 driver.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  1-Wire: Add support for the maxim ds1825 temperature sensor
  ti-st: Fix check for pdata->chip_awake function pointer
  mei: add mei_quirk_probe function
  mei: fix device stall after wd is stopped