- 29 Nov, 2022 1 commit
-
-
Dan Carpenter authored
We shuffled the error handling around so this condition is dead code now. The "error" variable is always zero. Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y33BD9xkRC9euIdO@kiliSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 Nov, 2022 1 commit
-
-
Eray Orçunus authored
HUTRR72 added 3 new usage codes for keys that are supposed to enable, disable and toggle camera access. These are useful, considering many laptops today have key(s) for toggling access to camera. This patch adds new key definitions for KEY_CAMERA_ACCESS_ENABLE, KEY_CAMERA_ACCESS_DISABLE and KEY_CAMERA_ACCESS_TOGGLE. Additionally hid-debug is adjusted to recognize this new usage codes as well. Signed-off-by:
Eray Orçunus <erayorcunus@gmail.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/20221029120311.11152-3-erayorcunus@gmail.comSigned-off-by:
-
- 22 Nov, 2022 10 commits
-
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20221121145203.1efb0c08@endymion.delvareSigned-off-by:
-
Raul E Rangel authored
The i2c-core will now handle setting the wake_irq and wake capability for DT and ACPI systems. Signed-off-by:
Raul E Rangel <rrangel@chromium.org> Link: https://lore.kernel.org/r/20220929093200.v6.13.Ia0b24ab02c22125c5fd686cc25872bd26c27ac23@changeidSigned-off-by:
-
Raul E Rangel authored
The i2c-core will now handle setting the wake_irq and wake capability for DT and ACPI systems. Signed-off-by:
-
Raul E Rangel authored
The i2c-core will now handle setting the wake_irq and wake capability for DT and ACPI systems. Signed-off-by:
-
Raul E Rangel authored
The i2c-core will now handle setting the wake_irq for DT and ACPI systems. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220929093200.v6.10.Id22d056440953134d8e8fe2c2aff79c79bc78424@changeidSigned-off-by:
-
Raul E Rangel authored
This is now handled by the i2c-core driver. Signed-off-by:
-
Raul E Rangel authored
The raydium I2C touchscreen driver is currently manually managing the wake IRQ. This change removes the explicit enable_irq_wake / disable_irq_wake and instead relies on the PM subsystem. This is done by calling dev_pm_set_wake_irq. i2c_device_probe already calls dev_pm_set_wake_irq when using device tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq. There could be some device tree systems that have incorrectly declared `wake` capabilities, so this change will set the wake irq if one is missing. This matches the previous behavior. Signed-off-by:
-
Raul E Rangel authored
The Elan I2C touchscreen driver is currently manually managing the wake IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake and instead relies on the PM subsystem. This is done by calling dev_pm_set_wake_irq. i2c_device_probe already calls dev_pm_set_wake_irq when using device tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq. There could be some device tree systems that have incorrectly declared `wake` capabilities, so this change will set the wake irq if one is missing. This matches the previous behavior. Signed-off-by:
-
Raul E Rangel authored
The Elan I2C touchpad driver is currently manually managing the wake IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake and instead relies on the PM subsystem. This is done by calling dev_pm_set_wake_irq. i2c_device_probe already calls dev_pm_set_wake_irq when using device tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq. There could be some device tree systems that have incorrectly declared `wake` capabilities, so this change will set the wake irq if one is missing. This matches the previous behavior. I tested this on an ACPI system where the touchpad doesn't have _PRW defined. I verified I can still wake the system and that the wake source was the touchpad IRQ GPIO. Signed-off-by:
-
Raul E Rangel authored
The I2C hid driver is currently manually managing the wake IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake and instead relies on the PM subsystem. This is done by calling dev_pm_set_wake_irq. i2c_device_probe already calls dev_pm_set_wake_irq when using device tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq. There could be some device tree systems that have incorrectly declared `wake` capabilities, so this change will set the wake irq if one is missing. This matches the previous behavior. I tested this on an ACPI system that has a HID touchscreen and verified the IRQ was armed for wake on suspend. Signed-off-by:
-
- 18 Nov, 2022 3 commits
-
-
Uwe Kleine-König authored
pwm_request() isn't recommended to be used any more because it relies on global IDs for the PWM which comes with different difficulties. The new way to do things is to find the right PWM using a reference from the platform device. (This can be created either using a device-tree or a platform lookup table, see e.g. commit 5a4412d4 ("ARM: pxa: tavorevb: Use PWM lookup table") how to do this.) There are no in-tree users, so there are no other code locations that need adaption. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221117073543.3790449-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Douglas Anderson authored
As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage. We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have: devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high. Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low). Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this. Fixes: afe10358 ("Input: elants_i2c - wire up regulator support") Signed-off-by:
-
Chris Morgan authored
In the very unlikely event the cst3xx_i2c_write() fails inside of the cst3xx_bootloader_enter() function 5 times in a row, the uninitalized value of tmp will get compared to CST3XX_BOOTLDR_CHK_VAL. Initialize the value of tmp to 0 so that in this unlikely event we are comparing 0 instead of an uninitalized variable. Fixes: 66603243 ("Input: add driver for Hynitron cstxxx touchscreens") Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reported-by:
-
- 16 Nov, 2022 3 commits
-
-
Matti Vaittinen authored
The fixp_sin32_rad() contains a call to BUG_ON(). If users of fixp-arith.h have not included the bug.h prior including the fixp-arith.h the compiler will not find the BUG_ON. Thus every user of fixp-arith.h must also include bug.h (or roll own variant of BUG_ON()). Include bug.h from fixp-arith.h so every user of fixp-arith.h does not need to include the bug.h prior inclusion of fixp-arith.h Fixes: 559addc2 ("[media] fixp-arith: replace sin/cos table by a better precision one") Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/Y3SgVdVey9legtX+@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fiSigned-off-by:
-
Vincent Knecht authored
Some devices with msg2138 have back/menu/home keys. Add support for them. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20221116211622.2155747-3-vincent.knecht@mailoo.orgSigned-off-by:
-
Vincent Knecht authored
Document optional linux,keycodes support. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Nov, 2022 3 commits
-
-
Vincent Knecht authored
msg2138 only supports 2 fingers presses, and needs different processing since second finger press is encoded as a delta position wrt. first one and the packet/touch_event structs are not the same as msg2638. Add support for it by implementing distinct structs and irq handler. Signed-off-by:
-
Vincent Knecht authored
Document msg2138 support by adding mstar,msg2138 compatible. Acked-by:
-
Vincent Knecht authored
This will allow us to add other MStar touchscreen variants' support. No functional change. Signed-off-by:
-
- 07 Nov, 2022 4 commits
-
-
Christophe JAILLET authored
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Randy Dunlap authored
Fix a Kconfig warning for JOYSTICK_ADC by also selecting IIO_BUFFER. WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y] Fixes: 2c2b364f ("Input: joystick - add ADC attached joystick driver.") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.orgSigned-off-by:
-
Job Noorman authored
This patch adds support for Himax hx83112b touchscreen devices. As there are no publicly available data sheets for these devices, the implementation is based on the driver of the downstream Android kernel used in the Fairphone 3. This patch is a complete rewrite, though, and the code bears no resemblence to the original implementation. The driver has been tested on the aforementioned phone. Signed-off-by:
Job Noorman <job@noorman.info> Reviewed-by:
Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.infoSigned-off-by:
-
Job Noorman authored
This patch adds device tree bindings for Himax 83112b touchscreen devices. Signed-off-by:
-
- 03 Nov, 2022 2 commits
-
-
Andre Przywara authored
The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC) compatible to the version in other SoCs. The manual doesn't mention the ratio of the input voltage that is used, but comparing actual measurements with the values in the register suggests that it is 3/4 of Vref. Add an F1C100s compatible string to the list, and pair it with the A83T fallback. Since the A64 is the same, combined both using an enum. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
-
Siarhei Volkau authored
Some Pin/GPIO controllers can't get current GPIO status when interrupt mode is set. Specifically Ingenic's JZ4755 always returns status at the moment of interrupt. The patch tries to fix that by forcibly setting pin mode to GPIO input prior to reading actual row status. enable_row_irqs seems to set interrupt mode back as it should be. Signed-off-by:
Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221102165747.1528988-1-lis8215@gmail.comSigned-off-by:
-
- 01 Nov, 2022 2 commits
-
-
Alistair Francis authored
This is the basic driver for the Cypress TrueTouch Gen5 touchscreen controllers. This driver supports only the I2C bus but it uses regmap so SPI support could be added later. The touchscreen can retrieve some defined zone that are handled as buttons (according to the hardware). That is why it handles button and multitouch events. Reviewed-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Mylène Josserand <mylene.josserand@bootlin.com> Signed-off-by:
Alistair Francis <alistair@alistair23.me> Tested-by: Andreas Kemnade <andreas@kemnade.info> # Kobo Clara HD Tested-by:
Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20221026114908.191472-2-alistair@alistair23.meSigned-off-by:
-
Alistair Francis authored
Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings documentation. It can use I2C or SPI bus. This touchscreen can handle some defined zone that are designed and sent as button. To be able to customize the keycode sent, the "linux,code" property in a "button" sub-node can be used. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
- 30 Oct, 2022 4 commits
-
-
Chris Morgan authored
Add support for the Hynitron cst3xx controller found on devices such as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver was built from sources provided by Hynitron to Anbernic (possibly via Rockchip as an intermediary) and marked as GPLv2 in the code. This driver was written strictly for the cst3xx series, but in most places was left somewhat generic so support could be easily added to other devices in the future. Signed-off-by:
-
Chris Morgan authored
Add documentation for the Hynitron cstxxx touchscreen bindings. Hynitron makes a series of touchscreen controllers, however for now this is expected to only be compatible with the cst3xx series, specifically the CST340, CST348, and CST356. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221028202636.14341-3-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Hynitron is a company based in Shanghai that makes controller ICs for touchscreens. http://www.hynitron.com/Signed-off-by:
-
Neil Armstrong authored
Convert input/qcom,pm8xxx-pwrkey.txt to YAML, and take in account that the PM8921 pwrkey compatible is used as fallback for the PM8018 pwrkey. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220928-mdm9615-dt-schema-fixes-v4-6-dac2dfaac703@linaro.orgSigned-off-by:
-
- 28 Oct, 2022 2 commits
-
-
Dmitry Torokhov authored
The driver is using of_property_read_u32() and therefore needs to include of.h header. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Dmitry Torokhov authored
The board file for Wolfson Cragganmore 6410 uses various KEY_* defines, but does not include the relevant header directly and instead relies on other headers to include it indirectly. With the upcoming cleanup of matrix_keypad.h this indirection is now broken and we should include the relevant header directly. Reported-by:
-
- 24 Oct, 2022 5 commits
-
-
Dmitry Torokhov authored
The driver is using of_device_id/of_match_ptr() and therefore needs to include of.h header. We used to get this definition indirectly via inclusion of matrix_keypad.h from twl.h, but we are cleaning up matrix_keypad.h from unnecessary includes. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220927154611.3330871-3-dmitry.torokhov@gmail.comSigned-off-by:
-
Colin Ian King authored
The variable loops is being incremented but is never referenced, it is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Jeff LaBundy authored
IQS7222A revisions 1.13 and later widen the gesture multiplier from x4 ms to x16 ms. Add a means to scale the gesture timings specified in the device tree based on the revision of the device. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
IQS7222A revisions 1.13 and later widen the gesture multiplier from x4 ms to x16 ms; update the binding accordingly. As part of this change, refresh the corresponding properties in the example as well. Fixes: 44dc42d2 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
Select variants of silicon do not define a default slider size, in which case the size must be specified in the device tree. If it is not, the axis's maximum value is reported as 65535 due to unsigned integer overflow. To solve this problem, move the existing zero-check outside of the conditional block that checks whether the property is present. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
