- 28 Apr, 2016 10 commits
-
-
Arnaldo Carvalho de Melo authored
The error messages returned by this method should not have an ending newline, fix the two cases where it was. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-8af0pazzhzl3dluuh8p7ar7p@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
When the kernel allows tweaking perf_event_max_stack and the event being setup has PERF_SAMPLE_CALLCHAIN in its perf_event_attr.sample_type, tell the user that tweaking /proc/sys/kernel/perf_event_max_stack may solve the problem. Before: # echo 32000 > /proc/sys/kernel/perf_event_max_stack # perf record -g usleep 1 Error: The sys_perf_event_open() syscall returned with 12 (Cannot allocate memory) for event (cycles:ppp). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? # After: # echo 64000 > /proc/sys/kernel/perf_event_max_stack # perf record -g usleep 1 Error: Not enough memory to setup event with callchain. Hint: Try tweaking /proc/sys/kernel/perf_event_max_stack Hint: Current value: 64000 # Suggested-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ebv0orelj1s1ye857vhb82ov@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Florian Fainelli authored
Coverity flagged this under CID 1354884 as a sizeof mismatch, it turns out that the argument "attr" passed to syscall should have been a pointer to attr in the first place. Reported-by: coverity (CID 1354884) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 8f9e05fb ("perf tools: Fix PowerPC native building") Link: http://lkml.kernel.org/r/1461551694-5512-3-git-send-email-f.fainelli@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Florian Fainelli authored
Assigning "attr" to "attr" does not have any effect, but was caught by Coverity, so let's remove this. Reported-by: coverity (CID 1354720) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 1b76c13e ("bpf tools: Introduce 'bpf' library and add bpf feature check") Link: http://lkml.kernel.org/r/1461551694-5512-2-git-send-email-f.fainelli@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Srinivas Pandruvada authored
Skylake processor supports a new set of RAPL registers for controlling entire SoC instead of just CPU package. This is useful for thermal and power control when source of power/thermal is not just CPU/GPU. This change adds a new platform domain (AKA PSys) to the current power capping Intel RAPL driver. PSys also supports PL1 (long term) and PL2 (short term) control like package domain. This also follows same MSRs for energy and time units as package domain. Unlike package domain, PSys support requires more than just processor level implementation. The other parts in the system need additional implementation, which OEMs needs to support. So not all Skylake systems will support PSys. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jacob.jun.pan@linux.intel.com Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1460930581-29748-3-git-send-email-srinivas.pandruvada@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Conflicts: arch/x86/events/intel/pt.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Kan Liang authored
This patch fixes a bug which was introduced by: b16a5b52 ("perf/x86: Add option to disable reading branch flags/cycles") In this patch, lbr_sel_mask is used to mask the lbr_select. But LBR_SEL_MASK doesn't include the bit for LBR_CALL_STACK. So LBR call stack will never be set in lbr_select. This patch corrects the LBR_SEL_MASK by including all valid bits in LBR_SELECT. Also, the LBR_CALL_STACK bit is different as other bit in LBR_SELECT. It does not operate in suppress mode, so it needs to be specially handled in intel_pmu_setup_hw_lbr_filter. Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1461231010-4399-1-git-send-email-kan.liang@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Alexander Shishkin authored
Some versions of Intel PT do not support tracing across VMXON, more specifically, VMXON will clear TraceEn control bit and any attempt to set it before VMXOFF will throw a #GP, which in the current state of things will crash the kernel. Namely: $ perf record -e intel_pt// kvm -nographic on such a machine will kill it. To avoid this, notify the intel_pt driver before VMXON and after VMXOFF so that it knows when not to enable itself. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/87oa9dwrfk.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Jann reported that the ptrace_may_access() check in find_lively_task_by_vpid() is racy against exec(). Specifically: perf_event_open() execve() ptrace_may_access() commit_creds() ... if (get_dumpable() != SUID_DUMP_USER) perf_event_exit_task(); perf_install_in_context() would result in installing a counter across the creds boundary. Fix this by wrapping lots of perf_event_open() in cred_guard_mutex. This should be fine as perf_event_exit_task() is already called with cred_guard_mutex held, so all perf locks already nest inside it. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Adam Borowski authored
The entry for PERF_COUNT_HW_REF_CPU_CYCLES is not used on AMD, but is referenced by filter_events() which expects undefined events to have a value of 0. Found via KASAN: UBSAN: Undefined behaviour in arch/x86/events/amd/core.c:132:30 index 9 is out of range for type 'u64 [9]' UBSAN: Undefined behaviour in arch/x86/events/amd/core.c:132:9 load of address ffffffff81c021c8 with insufficient space for an object of type 'const u64' Signed-off-by: Adam Borowski <kilobyte@angband.pl> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1461749731-30979-1-git-send-email-kilobyte@angband.plSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 27 Apr, 2016 3 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160427' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - perf trace --pf maj/min/all works with --call-graph: (Arnaldo Carvalho de Melo) Tracing write syscalls and major page faults with callchains while starting firefox, limiting the stack to 5 frames: # perf trace -e write --pf maj --max-stack 5 firefox 589.549 ( 0.014 ms): firefox/15377 write(fd: 4, buf: 0x7fff80acc898, count: 151) = 151 [0xfaed] (/usr/lib64/libpthread-2.22.so) fire_glxtest_process+0x5c (/usr/lib64/firefox/libxul.so) InstallGdkErrorHandler+0x41 (/usr/lib64/firefox/libxul.so) XREMain::XRE_mainInit+0x12c (/usr/lib64/firefox/libxul.so) XREMain::XRE_main+0x1e4 (/usr/lib64/firefox/libxul.so) 760.704 ( 0.000 ms): firefox/15332 majfault [gtk_tree_view_accessible_get_type+0x0] => /usr/lib64/libgtk-3.so.0.1800.9@0xa0850 (x.) gtk_tree_view_accessible_get_type+0x0 (/usr/lib64/libgtk-3.so.0.1800.9) gtk_tree_view_class_intern_init+0x1a54 (/usr/lib64/libgtk-3.so.0.1800.9) g_type_class_ref+0x6dd (/usr/lib64/libgobject-2.0.so.0.4600.2) [0x115378] (/usr/lib64/libgnutls.so.30.6.3) This automagically selects "--call-graph dwarf", use "--call-graph fp" on systems where -fno-omit-frame-pointer was used to built the components of interest, to incur in less overhead, or tune "--call-graph dwarf" appropriately, see 'perf record --help'. - Allow /proc/sys/kernel/perf_event_max_stack, that defaults to the old hard coded value of PERF_MAX_STACK_DEPTH (127), useful for huge callstacks for things like Groovy, Ruby, etc, and also to reduce overhead by limiting it to a smaller value, upcoming work will allow this to be done per-event (Arnaldo Carvalho de Melo) - Make 'perf trace --min-stack' be honoured by --pf and --event (Arnaldo Carvalho de Melo) - Make 'perf evlist -v' decode perf_event_attr->branch_sample_type (Arnaldo Carvalho de Melo) # perf record --call lbr usleep 1 # perf evlist -v cycles:ppp: ... sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK, ... branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES # - Clear dummy entry accumulated period, fixing such 'perf top/report' output as: (Kan Liang) 4769.98% 0.01% 0.00% 0.01% tchain_edit [kernel] [k] update_fast_timekeeper - System calls with pid_t arguments gets them augmented with the COMM event more thoroughly: # trace -e perf_event_open perf stat -e cycles -p 15608 6.876 ( 0.014 ms): perf_event_open(attr_uptr: 0x2ae20d8, pid: 15608 (hexchat), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 6.882 ( 0.005 ms): perf_event_open(attr_uptr: 0x2ae20d8, pid: 15639 (gmain), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 6.889 ( 0.005 ms): perf_event_open(attr_uptr: 0x2ae20d8, pid: 15640 (gdbus), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 5 ^^^^^^^^^^^^^^^^^^ ^C - Fix offline module name mismatch issue in 'perf probe' (Ravi Bangoria) - Fix module probe issue if no dwarf support in (Ravi Bangoria) Assorted fixes: - Fix off-by-one in write_buildid() (Andrey Ryabinin) - Fix segfault when printing callchains in 'perf script' (Chris Phlipot) - Replace assignment with comparison on assert check in 'perf test' entry (Colin Ian King) - Fix off-by-one comparison in intel-pt code (Colin Ian King) - Close target file on error path in 'perf probe' (Masami Hiramatsu) - Set default kprobe group name if not given in 'perf probe' (Masami Hiramatsu) - Avoid partial perf_event_header reads (Wang Nan) Infrastructure changes: - Update x86's syscall_64.tbl copy, adding preadv2 & pwritev2 (Arnaldo Carvalho de Melo) - Make the x86 clean quiet wrt syscall table removal (Jiri Olsa) Cleanups: - Simplify wrapper for LOCK_PI in 'perf bench futex' (Davidlohr Bueso) - Remove duplicate const qualifier (Eric Engestrom) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Arnaldo Carvalho de Melo authored
There is an upper limit to what tooling considers a valid callchain, and it was tied to the hardcoded value in the kernel, PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl, make it read it and use that as the upper limit, falling back to PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 Apr, 2016 14 commits
-
-
Arnaldo Carvalho de Melo authored
Propagate the error instead. Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-z6erjg35d1gekevwujoa0223@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Introduced in commit 4babf2c5 ("x86: wire up preadv2 and pwritev2"). This will make 'perf trace' aware of them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vojoylgce2cetsy36446s5ny@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
Perf is not able to register probe in kernel module when dwarf supprt is not there(and so it goes for symtab). Perf passes full path of module where only module name is required which is causing the problem. This patch fixes this issue. Before applying patch: $ dpkg -s libdw-dev dpkg-query: package 'libdw-dev' is not installed and no information is... $ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init Added new event: probe:kprobe_init (on kprobe_init in /linux/samples/kprobes/kprobe_example.ko) You can now use it in all perf tools, such as: perf record -e probe:kprobe_init -aR sleep 1 $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/kprobe_init /linux/samples/kprobes/kprobe_example.ko:kprobe_init $ sudo ./perf record -a -e probe:kprobe_init [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.105 MB perf.data ] $ sudo ./perf script # No output here After applying patch: $ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init Added new event: probe:kprobe_init (on kprobe_init in kprobe_example) You can now use it in all perf tools, such as: perf record -e probe:kprobe_init -aR sleep 1 $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/kprobe_init kprobe_example:kprobe_init $ sudo ./perf record -a -e probe:kprobe_init [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.105 MB perf.data (2 samples) ] $ sudo ./perf script insmod 13990 [002] 5961.216833: probe:kprobe_init: ... insmod 13995 [002] 5962.889384: probe:kprobe_init: ... Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1461680741-12517-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
Perf can add a probe on kernel module which has not been loaded yet. The current implementation finds the module name from path. But if the filename is different from the actual module name then perf fails to register a probe while loading module because of mismatch in the names. For example, samples/kobject/kobject-example.ko is loaded as kobject_example. Before applying patch: $ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show Added new event: probe:foo_show (on foo_show in kobject-example) You can now use it in all perf tools, such as: perf record -e probe:foo_show -aR sleep 1 $ cat /sys/kernel/debug/tracing/kprobe_events p:probe/foo_show kobject-example:foo_show $ insmod kobject-example.ko $ lsmod Module Size Used by kobject_example 16384 0 Generate read to /sys/kernel/kobject_example/foo while recording data with below command $ sudo ./perf record -e probe:foo_show -a [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.093 MB perf.data ] $./perf report --stdio -F overhead,comm,dso,sym Error: The perf.data.old file has no samples! After applying patch: $ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show Added new event: probe:foo_show (on foo_show in kobject_example) You can now use it in all perf tools, such as: perf record -e probe:foo_show -aR sleep 1 $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/foo_show kobject_example:foo_show $ insmod kobject-example.ko $ lsmod Module Size Used by kobject_example 16384 0 Generate read to /sys/kernel/kobject_example/foo while recording data with below command $ sudo ./perf record -e probe:foo_show -a [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.097 MB perf.data (8 samples) ] $ sudo ./perf report --stdio -F overhead,comm,dso,sym ... # Samples: 8 of event 'probe:foo_show' # Event count (approx.): 8 # # Overhead Command Shared Object Symbol # ........ ....... ................. ............ # 100.00% cat [kobject_example] [k] foo_show Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1461680741-12517-2-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
We get notifications for threads that gets created while we're tracing, but for preexisting threads we may end not having synthesized them, like when tracing a 'perf trace' session that will use '--pid' to trace some other thread. And besides we should probably stop synthesizing those records and instead read thread information in a lazy way, i.e. just when we need, like done in this patch: Now the 'pid_t' argument in 'perf_event_open' gets translated to a COMM: # perf trace -e perf_event_open perf stat -e cycles -p 31601 0.027 ( 0.027 ms): perf/23393 perf_event_open(attr_uptr: 0x2fdd0d8, pid: 31601 (abrt-dump-journ), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ = 3 ^C And in other syscalls containing pid_t without thread->comm_set at the time of the formatting. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ioeps6dlwst17d6oozc9shtk@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Will be used for lazy comm loading in 'perf trace'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7ogbkuoka1y2qsmcckqxvl5m@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To read things like /proc/self/comm. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ztpkbmseidt0hq2psr46o0h9@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Leave it alone so that it ends up assigned to SCA_PID via its type, 'pid_t', that will look up the pid on the machine thread rb_tree and possibly find its COMM. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-r7dujgmhtxxfajuunpt1bkuo@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To reduce the size of builtin-trace.c. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-8r3gmymyn3r0ynt4yuzspp9g@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Set kprobe group name as "probe" if it is not given. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160426090413.11891.95640.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Since other methods return 0 if succeeded (or filedesc), let probe_file__add_event() return 0 instead of the length of written bytes. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160426090303.11891.18232.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
As a utility function, add lsdir() which reads given directory and store entry name into a strlist. lsdir accepts a filter function so that user can filter out unneeded entries. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160426090242.11891.79014.stgit@devbox [ Do not use the 'dirname' it is used in some distros ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Fix a bug to close target elf file in get_text_start_address(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160426064737.1443.44093.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Wang Nan authored
Don't read broken data after 'head' pointer. Following commits will feed perf_evlist__mmap_read() with some 'head' pointers not maintained by kernel. If 'head' pointer breaks an event, we should avoid reading from the broken event. This can happen in backward ring buffer. For example: old head | | V V +---+------+----------+----+-----+--+ |..E|D....D|C........C|B..B|A....|E.| +---+------+----------+----+-----+--+ 'old' pointer points to the beginning of 'A' and trying read from it, but 'A' has been overwritten. In this case, don't try to read from 'A', simply return NULL. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461637738-62722-2-git-send-email-wangnan0@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 25 Apr, 2016 13 commits
-
-
Kan Liang authored
The accumulated period for dummy entry should also be 0. Otherwise, the total overhead could be overcounted. $ perf record -e '{LLC-load-misses,cpu/instructions/}' --call-graph=lbr ./tchain $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 21K of event 'anon group { LLC-load-misses, cpu/instructions/ }' # Event count (approx.): 16313667937 # # Children Self Command Shared Object Symbol # ................ ................ ........... ................ ............................ # 4769.98% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] update_fast_timekeeper 4356.18% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] trigger_load_balance 3181.12% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] irq_work_tick 1592.37% 0.00% 0.00% 0.00% tchain_edit [kernel.vmlinux] [k] cpu_needs_another_gp Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1461565689-5862-1-git-send-email-kan.liang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Colin Ian King authored
The check for the maximum code is off-by-one; the current comparison of a code that is INTEL_PT_ERR_MAX will cause the strlcpy to perform an out of bounds array access on the intel_pt_err_msgs array. Fix this with a >= comparison. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461524203-10224-1-git-send-email-colin.king@canonical.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Davidlohr Bueso authored
Given that the 'val' parameter is ignored for FUTEX_LOCK_PI, get rid of the bogus deadlock detection flag in the wrapper code and avoid the extra argument, making it resemble its unlock counterpart. And if nothing else, we already only pass 0 anyway. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1461208447-29328-1-git-send-email-dave@stgolabs.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Colin Ian King authored
The current assert check is checking an assignment, which will always be true. Instead, the assert should be checking if scale is equal to 0.122 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461419154-16918-1-git-send-email-colin.king@canonical.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Eric Engestrom authored
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461577678-29517-1-git-send-email-eric.engestrom@imgtec.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Fix perf_clean target to follow the same logic as perf target. Fixes the following make invokation: $ cd <kernelsrc> && make tools/perf_clean Reported-by: TJ <linux@iam.tj> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116411 Link: http://lkml.kernel.org/r/1461615438-27894-2-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Turn current clean output: $ make clean rm -f arch/x86/include/generated/asm/syscalls_64.c CLEAN libbpf CLEAN libapi into: $ make clean CLEAN x86 CLEAN libapi CLEAN libbpf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: TJ <linux@iam.tj> Link: http://lkml.kernel.org/r/1461615438-27894-1-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
While trying to use --call-graph lbr in 'perf trace', since we only are interested in the callchain for userspace, up to the callchain, I found that 'perf evlist' is not decoding the branch_sample_type field, fix it. Before: # perf record --call-graph lbr usleep 1 # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, branch_sample_type: 51201 ^^^^^^^^^^^^^^^^^^^^^^^^^ After: # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-hozai7974u0ulgx13k96fcaw@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To check deeply nested page fault callchains. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wuji34xx003kr88nmqt6jkgf@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-shj0fazntmskhjild5i6x73l@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Chris Phlipot authored
This fixes a bug caused by an unitialized callchain cursor. The crash frist appeared in: 6f736735 ("perf evsel: Require that callchains be resolved before calling fprintf_{sym,callchain}") The callchain cursor is a struct that contains pointers, that when uninitialized will cause unpredictable behavior (usually a crash) when trying to append to the callchain. The existing implementation has the following issues: 1. The callchain cursor used is not initialized, resulting in unpredictable behavior when used. 2. The cursor is declared on the stack. Even if it is properly initalized, the implmentation will leak memory when the function returns, since all the references to the callchain_nodes allocated by callchain_cursor_append will be lost when the cursor goes out of scope. 3. Storing the cursor on the stack is inefficient. Even if memory is properly freed when it goes out of scope, a performance penalty will be incurred due to reallocation of callchain nodes. callchain_cursor_append is designed to avoid these reallocations when an existing cursor is reused. This patch fixes the crash by replacing cursor_callchain with a reference to the global callchain_cursor which also resolves all 3 issues mentioned above. How to reproduce the crash: $ perf record --call-graph=dwarf stress -t 1 -c 1 $ perf script > /dev/null Segfault Signed-off-by: Chris Phlipot <cphlipot0@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 6f736735 ("perf evsel: Require that callchains be resolved before calling fprintf_{sym,callchain}") Link: http://lkml.kernel.org/r/1461119531-2529-1-git-send-email-cphlipot0@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Forgot about page faults, a software event, when adding support for callchains, fix it: # trace --no-syscalls --pf maj --call dwarf 0.000 ( 0.000 ms): Xorg/2068 majfault [sfbSegment1+0x0] => /usr/lib64/xorg/modules/drivers/intel_drv.so@0x11b490 (x.) sfbSegment1+0x0 (/usr/lib64/xorg/modules/drivers/intel_drv.so) fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so) sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so) damagePolySegment+0x77 (/usr/libexec/Xorg) ProcPolySegment+0xe7 (/usr/libexec/Xorg) Dispatch+0x25f (/usr/libexec/Xorg) dix_main+0x3c3 (/usr/libexec/Xorg) __libc_start_main+0xf0 (/usr/lib64/libc-2.22.so) _start+0x29 (/usr/libexec/Xorg) 0.257 ( 0.000 ms): Xorg/2068 majfault [miZeroClipLine+0x0] => /usr/libexec/Xorg@0x18e830 (x.) miZeroClipLine+0x0 (/usr/libexec/Xorg) _fbSegment+0x2c0 (/usr/lib64/xorg/modules/drivers/intel_drv.so) sfbSegment1+0x67 (/usr/lib64/xorg/modules/drivers/intel_drv.so) fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so) sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so) damagePolySegment+0x77 (/usr/libexec/Xorg) ProcPolySegment+0xe7 (/usr/libexec/Xorg) Dispatch+0x25f (/usr/libexec/Xorg) dix_main+0x3c3 (/usr/libexec/Xorg) __libc_start_main+0xf0 (/usr/lib64/libc-2.22.so) _start+0x29 (/usr/libexec/Xorg) ^C# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-8h6ssirw5z15qyhy2lwd6f89@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Prep work for next patches, where we'll need access to the created evsels, to possibly configure callchains. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2pcgsgnkgellhlcao4aub8tu@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-