- 23 Aug, 2017 15 commits
-
-
Alex Frid authored
I2C controllers are also on the APB bus and therefor need this flag to handle resets correctly. Signed-off-by:
Alex Frid <afrid@nvidia.com> Reviewed-by:
Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Alex Frid authored
Don't take the fractional part into account to calculate the effective NDIV if fractional ndiv is not enabled. Signed-off-by:
-
Peter De Schrijver authored
Not all fields are read from the hw depending on the PLL type. Make sure the other fields are 0 by clearing the structure beforehand to prevent users such as the rate re-calculation code from using bogus values. Based on work by Alex Frid <afrid@nvidia.com> Signed-off-by:
-
Peter De Schrijver authored
Signed-off-by:
-
Peter De Schrijver authored
PLLD2 is used for HDMI which does not allow Spread Spectrum clocking. Signed-off-by:
-
Peter De Schrijver authored
Make sure the pll_ss ops are compiled even when only building for Tegra210. Signed-off-by:
Shreshtha Sahu <ssahu@nvidia.com> Tested-by:
Jon Mayo <jmayo@nvidia.com> Tested-by:
-
Peter De Schrijver authored
PLL SS was only controlled when setting the PLL rate, not when the PLL itself is enabled or disabled. Signed-off-by:
-
Georgi Djakov authored
The clock bimc_gpu_clk_src is incorrectly set to use the shared rcg2 ops, which are for RCGs with child branches controlled by different CPUs. The result of the incorrect ops is that the GPU's PM runtime may leave this clock set at a very low rate. Fix this issue by using the correct rcg2 ops. Fixes: a2e8272f ("clk: qcom: Add MSM8916 gpu clocks") Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only stored in the const field of a clk_init_data structure. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Stephen Boyd authored
Merge tag 'clk-renesas-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull Renesas clk driver updates from Geert Uytterhoeven: * Add more module clocks for R-Car V2H and M3-W, * Add support for the R-Car Gen3 USB 2.0 clock selector PHY, * Add support for the new R-Car D3 SoC, * Allow compile-testing of all (sub)drivers now all dummy infrastructure is available, * Small fixes and cleanups. * tag 'clk-renesas-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add USB3.0 clock clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY clk: renesas: cpg-mssr: Add R8A77995 support clk: renesas: rcar-gen3: Add support for SCCG/Clean peripheral clocks clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3 clk: renesas: Add r8a77995 CPG Core Clock Definitions clk: renesas: rcar-gen3-cpg: Refactor checks for accessing the div table clk: renesas: rcar-gen3-cpg: Drop superfluous variable clk: renesas: Allow compile-testing of all (sub)drivers clk: renesas: r8a7792: Add IMR-LX3/LSX3 clocks clk: renesas: div6: Document fields used for parent selection
-
Stephen Boyd authored
Silence the sparse warning clk/rockchip/clk.c:172:6: warning: symbol 'rockchip_fractional_approximation' was not declared. Should it be static? Cc: Elaine Zhang <zhangqing@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: -
Stephen Boyd authored
Merge tag 'v4.14-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull Rockchip clk driver updates from Heiko Stuebner: The biggest change is fixing the jitter on the fractional clock-type Rockchip socs experience with the default approximation. For that we introduce the ability to override it with a clock-specific approximation and use that to create the needed rate settings as described in the Rockchip soc manuals (same for all Rockchip socs). Apart from that we have support for the rk3126 clock controller which is similar to the rk3128 with some minimal differences and a lot of improvements and fixes for the rv1108 clock controller (missing clocks, some clock-ids, naming fixes, register fixes). * tag 'v4.14-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: fix the rv1108 clk_mac sel register description clk: rockchip: rename rv1108 macphy clock to mac clk: rockchip: add rv1108 ACLK_GMAC and PCLK_GMAC clocks clk: rockchip: add rk3228 SCLK_SDIO_SRC clk id clk: rockchip: add rv1108 ACLK_GAMC and PCLK_GMAC ID clk: rockchip: add rk3228 sclk_sdio_src ID clk: rockchip: add special approximation to fix up fractional clk's jitter clk: fractional-divider: allow overriding of approximation clk: rockchip: modify rk3128 clk driver to also support rk3126 dt-bindings: add documentation for rk3126 clock clk: rockchip: add some critical clocks for rv1108 SoC clk: rockchip: rename some of clks for rv1108 SoC clk: rockchip: fix up some clks describe error for rv1108 SoC clk: rockchip: support more clks for rv1108 clk: rockchip: fix up the pll clks error for rv1108 SoC clk: rockchip: support more rates for rv1108 cpuclk clk: rockchip: fix up indentation of some RV1108 clock-ids clk: rockchip: rename the clk id for HCLK_I2S1_2CH clk: rockchip: add more clk ids for rv1108
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull Allwinner clock changes from Chen-Yu Tsai: * Added support for fixed post-divider on divider and NKM-style clocks * Added driver for R40 CCU * Fix sunxi-ng/ccu-sunxi-r.h header file guard macro typo * Make fractional clock modes really used and correctly configured * Make H3 cpu clock rate change correctly to be used with cpufreq * tag 'sunxi-clk-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: support R40 SoC dt-bindings: add compatible string for Allwinner R40 CCU clk: sunxi-ng: nkm: add support for fixed post-divider clk: sunxi-ng: div: Add support for fixed post-divider dt-bindings: clock: sunxi-ccu: Add compatibles for sun5i CCU driver clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3 clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change clk: sunxi-ng: Wait for lock when using fractional mode clk: sunxi-ng: Make fractional helper less chatty clk: sunxi-ng: multiplier: Fix fractional mode clk: sunxi-ng: Fix fractional mode for N-M clocks clk: sunxi-ng: Fix header guard of ccu-sun8i-r.h
-
Stephen Boyd authored
Merge tag 'clk-v4.14-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next Pull Samsung clk driver updates from Sylwester Nawrocki: Changes in definitions of audio related clocks for Exynos5420/5422/5800 SoCs: a fix of mau_epll clock definition and changes enabling clock rate setting propagation on a path from the I2S IP block up the EPLL. * tag 'clk-v4.14-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: exynos542x: Enable clock rate propagation up to the EPLL clk: samsung: Add CLK_SET_RATE_PARENT to some AUDSS CLK CON clocks clk: samsung: Fix mau_epll clock definition for exynos5422
-
git://github.com/baylibre/clk-mesonStephen Boyd authored
Pull Amlogic clock driver updates from Neil Armstrong: * meson8b: add the reset controller to the clkc * meson: expose all clk ids * gxbb-aoclk: Add CEC 32k clock * gxbb: add mmc input 0 clocks * meson: fix protection against undefined clks * gxbb: fix audio divider flags * tag 'meson-clk-for-4.14' of git://github.com/baylibre/clk-meson: clk: meson: gxbb-aoclk: Add CEC 32k clock clk: meson: gxbb-aoclk: Switch to regmap for register access dt-bindings: clock: amlogic, gxbb-aoclkc: Update bindings clk: meson: gxbb: Add sd_emmc clk0 clocks clk: meson: gxbb: fix clk_mclk_i958 divider flags clk: meson: gxbb: fix meson cts_amclk divider flags clk: meson: meson8b: register the built-in reset controller dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock clk: meson: gxbb: Add sd_emmc clk0 clkids clk: meson-gxbb: expose almost every clock in the bindings clk: meson8b: expose every clock in the bindings clk: meson: gxbb: fix protection against undefined clks clk: meson: meson8b: fix protection against undefined clks dt-bindings: clock: meson8b: describe the embedded reset controller
-
- 22 Aug, 2017 4 commits
-
-
Elaine Zhang authored
The source clock ordering is wrong, as shown in the TRM: cru_sel24_con[8] rmii_extclk_sel clock source select control register 1'b0: from internal PLL 1'b1: from external IO Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Elaine Zhang authored
This MAC has no internal phy for rv1108 and the whole clock infrastructure hasn't been used yet, so is safe to fix. Signed-off-by:
-
Elaine Zhang authored
Add gmac aclk and pclk clock gates. Signed-off-by:
-
Elaine Zhang authored
In some special circumstances, may be need to reparent clk for sclk_sdio_src. Signed-off-by:
-
- 21 Aug, 2017 3 commits
-
-
Heiko Stuebner authored
-
Elaine Zhang authored
This patch exports gmac aclk and pclk for dts reference. Signed-off-by:
-
Elaine Zhang authored
This patch exports sdio src clock for dts reference. Signed-off-by:
-
- 19 Aug, 2017 2 commits
-
-
Icenowy Zheng authored
Allwinner R40 SoC have a clock controller module in the style of the SoCs beyond sun6i, however, it's more rich and complex. Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Chen-Yu Tsai <wens@csie.org>
-
Icenowy Zheng authored
Allwinner R40 has a clock controlling unit like the ones on other Allwinner SoCs after sun6i, and can also use a CCU-based driver. Add a compatible string for it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 17 Aug, 2017 2 commits
-
-
Hiromitsu Yamasaki authored
This patch adds USB3.0-IF0 clock for R8A7796 SoC. Signed-off-by:
Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Yoshihiro Shimoda authored
R-Car USB 2.0 controller can change the clock source from an oscillator to an external clock via a register. So, this patch adds support the clock source selector as a clock driver. Signed-off-by:
-
- 16 Aug, 2017 4 commits
-
-
Geert Uytterhoeven authored
Add R-Car D3 (R8A77995) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 CPG code. Based on the R-Car Series, 3rd Generation Hardware User's Manual, Rev. 0.55, Jun. 30, 2017. Signed-off-by:
-
Geert Uytterhoeven authored
On R-Car Gen3 SoCs with a Spread Spectrum Clock Generator (e.g. R-Car D3), a peripheral clock divider has been added, to select between clean and spread spectrum parents. Add a new clock type to the R-Car Gen3 driver core to handle this. To avoid increasing the size of struct cpg_core_clk, both parents and dividers are stored in the existing parent resp. div fields. Signed-off-by:
-
Geert Uytterhoeven authored
On some R-Car Gen3 SoCs (e.g. R-Car D3), PLL1 and PLL3 use a divider value different from one. Extend struct rcar_gen3_cpg_pll_config to handle this. As all multipliers and dividers are small, table size increase can be kept limited by storing them in u8s instead of unsigned ints, which saves ca. 0.5 KiB for a generic kernel. Signed-off-by:
-
Geert Uytterhoeven authored
Add all R-Car D3 Clock Pulse Generator Core Clock Outputs, as listed in Table 8.2f ("List of Clocks [R-Car D3]") of the R-Car Series, 3rd Generation Hardware User's Manual (Rev. 0.55, Jun. 30, 2017). Note that internal CPG clocks (S0, S1, S2, S3, S1C, S3C, SDSRC, and SSPSRC) are not included, as they are used as internal clock sources only, and never referenced from DT. Signed-off-by:
-
- 14 Aug, 2017 2 commits
-
-
Icenowy Zheng authored
SATA PLL on Allwinner R40 is of type (parent) * N * K / M / 6 where 6 is the fixed post-divider. Add post-divider support for NKM type clock. Signed-off-by:
-
Priit Laes authored
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where 6 is fixed post-divider. Signed-off-by:
Priit Laes <plaes@plaes.org> Signed-off-by:
-
- 11 Aug, 2017 1 commit
-
-
Jonathan Liu authored
The bindings were not updated when the sun5i CCU driver was added in commit 5e737617 ("clk: sunxi-ng: Add sun5i CCU driver"). Signed-off-by:
Jonathan Liu <net147@gmail.com> Acked-by:
-
- 10 Aug, 2017 1 commit
-
-
Sylwester Nawrocki authored
The CLK_SET_RATE_PARENT flag is added to clocks between the EPLL and the audio subsystem clock controller so that the EPLL's output frequency can be set indirectly with clk_set_rate() on a leaf clock. That should be safe as EPLL is normally only used to generate clock for the audio subsystem. With this change we can avoid passing the EPLL clock to the ASoC machine driver. Signed-off-by:Sylwester Nawrocki <s.nawrocki@samsung.com>
-
- 09 Aug, 2017 2 commits
-
-
Sylwester Nawrocki authored
This allows clk rate propagation up to the clock tree so EPLL can be reprogrammed indirectly when setting rate of the Audio Subsystem clocks. The advantage is that sound machine driver can operate only on the leaf clocks rather than explicitly re-configuring the root clock (EPLL). Signed-off-by: -
Sylwester Nawrocki authored
Parent clock of the MAU_EPLL gate clock on exynos5422 is "mout_user_mau_epll", not "mout_mau_epll_clk". This change only affects exynos5422/5800. Signed-off-by:
-
- 08 Aug, 2017 4 commits
-
-
Elaine Zhang authored
>From Rockchips fractional divider description: 3.1.9 Fractional divider usage To get specific frequency, clocks of I2S, SPDIF, UARTcan be generated by fractional divider. Generally you must set that denominator is 20 times larger than numerator to generate precise clock frequency. So the fractional divider applies only to generate low frequency clock like I2S, UART. Therefore add a special approximation function that handles this special requirement. Signed-off-by:
-
Elaine Zhang authored
Fractional dividers may have special requirements concerning numerator and denominator selection that differ from just getting the best approximation. For example on Rockchip socs the denominator must be at least 20 times larger than the numerator to generate precise clock frequencies. Therefore add the ability to provide custom approximation functions. Signed-off-by:
-
Elaine Zhang authored
rk3128 and rk3126 have some gate registers describe differences. So need to make some distinctions. The RK3126 and RK3128 Same clock description we move it to the common clock branches. And the different clks description use the own clock branches. Signed-off-by:
-
Elaine Zhang authored
This add bindings documentation for rk3126 SoCs. Signed-off-by:
-
