- 27 Jul, 2019 6 commits
-
-
Luca Weiss authored
Sensortek Technology Corp. produces Proximity Sensors with ALS and Accelerometers. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Fuqian Huang authored
iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Fuqian Huang authored
iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by:
-
Fuqian Huang authored
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatly. Signed-off-by:
-
Tomasz Duszynski authored
Add myself as a plantower pms7003 driver maintainer. Signed-off-by:
Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by:
-
Tomasz Duszynski authored
Convert existing device tree bindings to yaml. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 25 Jul, 2019 32 commits
-
-
J. Bruce Fields authored
Everywhere else in the kernel ESSIDs are printed using %pE, and I can't see why there should be an exception here. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Link: https://lore.kernel.org/r/1562799574-13315-1-git-send-email-bfields@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hariprasad Kelam authored
Both pu8 and pU1Tmp are of same data type u8. So replace pU1Tmp with u8. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Link: https://lore.kernel.org/r/20190725032325.GA16473@hari-Inspiron-1545Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function prototype ODM_SetAntenna. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190725052645.2372-9-nishkadg.linux@gmail.comSigned-off-by:
-
Nishka Dasgupta authored
Remove function ODM_TXPowerTrackingCheck as all it does is call odm_TXPowerTrackingCheckCE. Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function odm_TXPowerTrackingInit as all it does is call odm_TXPowerTrackingThermalMeterInit. Rename odm_TXPowerTrackingThermalMeterInit to odm_TXPowerTrackingInit to maintain compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function beacon_timing_control as it does nothing except call rtw_hal_bcn_related_reg_setting. Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function rtl8723b_set_ap_wowlan_cmd as all it does is call rtl8723b_set_AP_FwWoWlanRelated_cmd. Rename rtl8723b_set_AP_FwWoWlanRelated_cmd to rtl8723b_set_ap_wowlan_cmd to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function rtl8723b_set_wowlan_cmd as all it does is call rtl8723b_set_FwWoWlanRelated_cmd. Rename rtl8723b_set_FwWoWlanRelated_cmd to rtl8723b_set_wowlan_cmd to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function PHY_GetTxPowerIndex as it does nothing except call PHY_GetTxPowerIndex_8723B. Rename PHY_GetTxPowerIndex_8723B to PHY_GetTxPowerIndex to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function PHY_SetTxPowerIndex as it does nothing except call PHY_SetTxPowerIndex_8723B. Rename PHY_SetTxPowerIndex_8723B to PHY_SetTxPowerIndex to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Change comparisons to true to the variable itself. Change comparisons to false to the negation of the variable. Signed-off-by:
-
Colin Ian King authored
A statement is indented one level too deeply; clean this up by removing a tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190723145022.11608-1-colin.king@canonical.comSigned-off-by:
-
Sergio Paracuellos authored
Function 'mt7621_pcie_request_resources' is using 'err' local variable to get value returned from 'devm_request_pci_bus_resources' and returning after that. This is not needed at all. Instead of that just directly return returned value by the function which is also returning zero on success. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20190720072908.16795-1-sergio.paracuellos@gmail.comSigned-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8192e/rtllib_rx.c: In function rtllib_rx_InfraAdhoc: drivers/staging/rtl8192e/rtllib_rx.c:1303:6: warning: variable payload set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190717143551.29200-1-yuehaibing@huawei.comSigned-off-by:
-
Colin Ian King authored
The variable n is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Michael Straube authored
Remove the unused file hal_phy.c. No function from this file is used in the driver code and it is not listed in the Makefile. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20190721175735.24173-1-straube.linux@gmail.comSigned-off-by:
-
Hariprasad Kelam authored
Remove Unneeded variable ret . Return _FAIL . We cannot change return type of on_action_spct as its callback function. Issue identified with coccicheck. Signed-off-by:
-
Hariprasad Kelam authored
Change return type of rtw_suspend_ap_wow as its always return SUCCCESS. Issue found with coccicheck Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/hal/odm_HWConfig.c: In function odm_RxPhyStatus92CSeries_Parsing: drivers/staging/rtl8723bs/hal/odm_HWConfig.c:92:5: warning: variable cck_highpwr set but not used [-Wunused-but-set-variable] It is never used and can be removed. Reported-by:
-
Nishka Dasgupta authored
Change return type of r8712_free_recvframe from int to void as it always returns _SUCCESS and its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_init_recvbuf from int to void as it always returned _SUCCESS and this return value was never used at any call site. Signed-off-by:
-
Nishka Dasgupta authored
Change call sites of r8712_set_802_11_add_wep to check for 0 and non-zero values (e.g -EINVAL, -ENOMEM) instead of for _SUCCESS and _FAIL. Change return values of r8712_set_802_11_add_wep from true and false and _SUCCESS to -EINVAL and the return value of r8712_set_key. Change return type from u8 to int to accommodate these new return values. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of init_mp_priv from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Remove label that returns the required value and return the values directly as they are set. Consequently remove now-unnecessary return variable. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_register_cmd_alive from _SUCCESS and _FAIL to 0 and -EINVAL. Change the return type of this function from sint to int. Modify its call site to check for 0 instead of _SUCCESS. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_set_key from _SUCCESS and _FAIL to 0 and -ENOMEM or -EINVAL, as the case may require. Modify return statements and return variable accordingly. Change return type from sint to int. As there is only one site where the return value is used, update that call site according to the change in the return values. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_set_auth from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Modify call site accordingly. Also change return type of the function from sint to int. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_init_mlme_priv from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Modify call site accordingly. Signed-off-by:
-
Chuhong Yuan authored
Merge the combo of memcpy and be16_to_cpus. Use get_unaligned_be16 instead. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20190719070921.27749-1-hslester96@gmail.comSigned-off-by:
-
Christian L Moreno authored
Block comments should align the * on each line. This warning was reported by checkpatch.pl Signed-off-by:
Christian L Moreno <christianluciano.m@gmail.com> Link: https://lore.kernel.org/r/20190716190915.30869-1-christianluciano.m@gmail.comSigned-off-by:
-
Chuhong Yuan authored
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by:
-
Nishka Dasgupta authored
Remove function db2k_initialize_dac as all it does is call db2k_dac_disarm. Modify call site accordingly. Issue found with Coccinelle. Signed-off-by:
-
Lecopzer Chen authored
ion_buffer_add() insert ion_buffer into rbtree every time creating an ion_buffer but never use it after ION reworking. Also, buffer_lock protects only rbtree operation, remove it together. Signed-off-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: YJ Chiang <yj.chiang@mediatek.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Acked-by:
Laura Abbott <labbott@redhat.com> Link: https://lore.kernel.org/r/20190712084717.12441-1-lecopzer.chen@mediatek.comSigned-off-by:
-
- 22 Jul, 2019 2 commits
-
-
Nishka Dasgupta authored
Each iteration of for_each_compatible_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by:
-
