- 17 Mar, 2020 34 commits
-
-
Lorenzo Bianconi authored
Sobstitute sta_rec_wtbl data structure with tlv one Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_uni_set_ba routine in order to add support for mt7663e driver Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
Introduce mt7615_mcu_uni_set_bss, mt7615_mcu_uni_set_dev and mt7615_mcu_uni_set_beacon_offload uni mcu commands. This is a preliminary patch to add mt7663e support Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_uni_set_bmc and mt7615_mcu_uni_set_sta routines for mt7663e commands. Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mcu uni command type. Uni commands rely on a stripped verions of mt7615_mcu_txd data strutture. Split mt7615_mcu_txd_common and mt7615_mcu_txd. Uni commands will be use by mt7663e driver Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mt7615_init_mac_chain routine to configure per band mac register since new devices (e.g. mt7663e) do not support dbdc Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_eeprom_parse_hw_band_cap routine in order to configure supported band for mt7663e and mt7622 devices since they do not rely on eeprom data to enable 2GHz/5GHz bands Signed-off-by:
-
Lorenzo Bianconi authored
Extend mt7615_mcu_set_eeprom routine in order to be reused adding mt7663e support to mt7615 driver Co-developed-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Extend mt7615_driver_own and mt7615_firmware_own in order to reuse them adding mt7663e support to mt7615 driver Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mt7663e support to mt7615_reg_map routine in order to reuse it adding support for mt7663e driver Co-developed-by:
-
Lorenzo Bianconi authored
In order to reuse mt7615 code adding support for mt7663e driver, introduce mt7615e_reg_map since mt7663e and mt7615 rely on a different base registers definitions. Co-developed-by:
-
Lorenzo Bianconi authored
Currently fw commands rely on negative cmds since they need different mcu msg metadata. Extend this approach introducing MCU_FW_PREFIX. This is a preliminary patch to support new mt7663e firmware commands Signed-off-by:
-
Lorenzo Bianconi authored
Move mt7615_mcu_set_beacon_offload, mt7615_mcu_set_dev and mt7615_mcu_set_bss routine in mt7615_mcu_ops data structure. This is a preliminary patch to support mt7663 firmware Signed-off-by:
-
Lorenzo Bianconi authored
Simplify mt7615_mcu_set_bss_info relying on mcu tlv helpers Signed-off-by:
-
Lorenzo Bianconi authored
Rely on skb API and avoid kmalloc the buffer in mt7615_mcu_set_eeprom routine Signed-off-by:
-
Lorenzo Bianconi authored
Move mt7615_mcu_set_sta for fw version 1 and version 2 in mt7615_mcu_ops data structure. This is a preliminary patch to properly support mt7663e firmware. Rework utility routines to rely on skb APIs for msg parsing Signed-off-by:
-
Lorenzo Bianconi authored
Move mt7615_mcu_set_bmc for fw version 1 and version 2 in mt7615_mcu_ops data structure. This is a preliminary patch to properly support mt7663e firmware. Rework utility routines to rely on skb APIs for msg parsing Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_ops data structure in order to support multiple mcu ops API. Move mt7615_mcu_set_{tx,rx}_ba to mt7615_mcu_ops differentiating between fw v1 and v2. This is a preliminary patch to properly support mt7663e firmware. Rework utility routines to rely on skb APIs for msg parsing Signed-off-by: -
Lorenzo Bianconi authored
Introduce mt7615_mcu_send_message routine in order to allocate mcu skb out of mcu sending routine. This approach is useful when the mcu message is complicated and it is convenient to rely on skb buffer API Signed-off-by:
-
Lorenzo Bianconi authored
Always initialize to 0 mcu messages since if they are not propely configured they could hang the firmware. Signed-off-by:
-
Lorenzo Bianconi authored
Add mt7615_init_device routine in order to be reused adding support for mt7663 in mt7615 driver Signed-off-by:
-
Lorenzo Bianconi authored
In order to reuse mt7615_mcu_send_firmware routine adding support for usb devices, clean fw hw queue just for mmio devices Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_wait_response in order to be reused parsing mt7663u mcu messages Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_fill_msg routine to initialize mcu messages. mt7615_mcu_fill_msg will be reused adding mt7663u support Co-developed-by:
-
Chen Wandun authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/phy.c: In function mt76x0_phy_rf_init: drivers/net/wireless/mediatek/mt76/mt76x0/phy.c:1158:5: warning: variable val set but not used [-Wunused-but-set-variable] Fixes: 10de7a8b ("mt76x0: phy files") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Signed-off-by:
-
Dan Carpenter authored
This if statement was supposed to be deleted, but it wasn't. It means that we sometimes don't set the sensitivity correctly. Fixes: 2cad515e ("mt76: mt7615: add missing settings for simultaneous dual-band support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Felix Fietkau authored
Ensure that MCU commands issued right after hardware reset are not dropped and treated as failed. Signed-off-by: -
Felix Fietkau authored
When injecting beacon frames via monitor interface, they must not be sent to the beacon hardware queue, because they don't follow normal hardware beacon tx rules. Fix sending them by adding a flag to mt7615_mac_write_txwi that selects the beacon queue for tx, and use it only from mt7615_mcu_set_bcn. Signed-off-by: -
Felix Fietkau authored
In some cases it may be useful for debugging to disable this feature Signed-off-by: -
Felix Fietkau authored
If the minimum power is raised too much, it can make it impossible for weaker clients to connect, and there are some scenarios where the false detects will not go down no matter how much the sensitivity is adjusted. Fixes connectivity issues in some rare cases Signed-off-by: -
Felix Fietkau authored
Update wiphy available antenna mask, and fix chainmask setting on 3x3 hardware Signed-off-by: -
Lorenzo Bianconi authored
Starting from commit 'a6bfb6d1 ("mt76: usb: use max packet length for m76u_copy")' reg_val does not share memory with usb data buffer. On non-coherent devices this approach can corrupt data pointer since data and reg_val share the same cache-line, resulting in the following crash: [ 371.544901] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 8042fbb0 [ 371.558521] CPU: 0 PID: 11 Comm: kworker/u2:2 Not tainted 4.14.160 #0 [ 371.565204] Workqueue: mt76u mt76u_deinit [mt76_usb] [ 371.570331] task: 83823ac0 task.stack: 8386c000 [ 371.575004] $ 0 : 00000000 80590000 00000000 00000000 [ 371.580407] $ 4 : 82edaad0 00000002 83823ac0 fffffff8 [ 371.585810] $ 8 : fffffffd 0000fc00 8052da00 00000000 [ 371.591212] $12 : 000b2285 ae53a1a9 00108845 89da44c4 [ 371.596615] $16 : 82edaad0 82ed9d20 00001798 832edf00 [ 371.602019] $20 : 00000000 8386dda8 80530000 fffffffe [ 371.607421] $24 : 8051d040 76274d1b [ 371.612824] $28 : 8386c000 8386dd88 82edaad4 830d4d50 [ 371.618228] Hi : 000000f7 [ 371.621203] Lo : 33333371 [ 371.624196] epc : 8042fbb0 __mutex_lock.isra.2+0x134/0x378 [ 371.630043] ra : 830d4d50 mt76u_deinit+0x418/0xa6c [mt76_usb] [ 371.636237] Status: 1000fc03KERNEL EXL IE [ 371.640557] Cause : 0080000c (ExcCode 03) [ 371.644696] BadVA : 00000000 [ 371.647671] PrId : 00019374 (MIPS 24Kc) [ 371.726123] usbcore nls_base usb_common [ 371.730180] Process kworker/u2:2 (pid: 11, threadinfo=8386c000, task=83823ac0, tls=00000000) [ 371.738884] Stack : 833d009c 83210b4c 82ed8bc0 8386ddac 000001ff 8008ac50 8386ddac 83b74b00 [ 371.747519] 82edaad4 00000000 83b74b48 83210c38 82edaad0 82ed9d20 00001798 832edf00 [ 371.756157] 00000000 00000000 80530000 fffffffe 80530000 830d4d50 00000040 8389d850 [ 371.764794] 8052d9d8 8389d850 8386de30 82ed9d20 8386de5f 831c27bc 833d48ec 8052d9d8 [ 371.773431] 83823ac0 83823af0 82edab00 82ed9d20 8386de5f 831c5c30 00000000 8052d9a8 [ 371.782069] ... [ 371.784598] Call Trace: [ 371.787130] [<8042fbb0>] __mutex_lock.isra.2+0x134/0x378 [ 371.792622] [<830d4d50>] mt76u_deinit+0x418/0xa6c [mt76_usb] [ 371.808546] [ 371.810920] ---[ end trace c62f0601f6730eb0 ]--- [ 371.818101] Kernel panic - not syncing: Fatal exception [ 371.824420] Rebooting in 3 seconds.. Fix the issue relying only on data buffer to send/receive usb control messages Fixes: a6bfb6d1 ("mt76: usb: use max packet length for m76u_copy") Signed-off-by:
-
Lorenzo Bianconi authored
Remove usb workqueue if mt76u_set_endpoints fails. Fixes: 284efb47 ("mt76: mt76u: rely on a dedicated stats workqueue") Signed-off-by:
-
Lorenzo Bianconi authored
Loop over all possible hw rx queues in mt76u_rx_tasklet since new devices will report mcu events through mcu hw queue Signed-off-by:
-
- 16 Mar, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.7. Major changes: ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices
-
- 12 Mar, 2020 5 commits
-
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: b43-dev@lists.infradead.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: b43-dev@lists.infradead.org Signed-off-by:
-
