- 30 May, 2012 6 commits
-
-
Jean Delvare authored
As the bus driver side implementation of I2C_M_RECV_LEN is heavily tied to SMBus, we can't support received length over 32 bytes, but let's at least support that. In practice, the caller will have to setup a buffer large enough to cover the case where received length byte has value 32, so minimum 32 + 1 = 33 bytes, possibly more if there is a fixed number of bytes added for the specific slave (for example a checksum.) Signed-off-by:
Jean Delvare <khali@linux-fr.org> Tested-by:
Douglas Gilbert <dgilbert@interlog.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 trampoline rework from H. Peter Anvin: "This code reworks all the "trampoline"/"realmode" code (various bits that need to live in the first megabyte of memory, most but not all of which runs in real mode at some point) in the kernel into a single object. The main reason for doing this is that it eliminates the last place in the kernel where we needed pages to be mapped RWX. This code separates all that code into proper R/RW/RX pages." Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot code), and arch/x86/kernel/reboot.c (reboot code moved around in one branch, modified in this one), and arch/x86/tools/relocs.c (mostly same code came in earlier due to working around the ld bugs just before the 3.4 release). Also remove stale x86-relocs entry from scripts/.gitignore as per Peter Anvin. * commit '61f54461': (36 commits) x86, realmode: Move end signature into header.S x86, relocs: When printing an error, say relative or absolute x86, relocs: More relocations which may end up as absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug xen-acpi-processor: Add missing #include <xen/xen.h> acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c x86, realmode: Change EFER to a single u64 field x86, realmode: Move kernel/realmode.c to realmode/init.c x86, realmode: Move not-common bits out of trampoline_common.S x86, realmode: Mask out EFER.LMA when saving trampoline EFER x86, realmode: Fix no cache bits test in reboot_32.S x86, realmode: Make sure all generated files are listed in targets x86, realmode: build fix: remove duplicate build x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline x86, realmode: fixes compilation issue in tboot.c x86, realmode: move relocs from scripts/ to arch/x86/tools x86, realmode: header for trampoline code x86, realmode: flattened rm hierachy x86, realmode: don't copy real_mode_header x86, realmode: fix 64-bit wakeup sequence ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds authored
Pull EDAC internal API changes from Mauro Carvalho Chehab: "This changeset is the first part of a series of patches that fixes the EDAC sybsystem. On this set, it changes the Kernel EDAC API in order to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and Intel E5-xxxx memory controllers. The EDAC core used to assume that: - the DRAM chip select pin is directly accessed by the memory controller - when multiple channels are used, they're all filled with the same type of memory. None of the above premises is true on Intel memory controllers since 2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory Buffer or by some similar technologies hides the direct access to the DRAM pins. So, the existing drivers for those chipsets had to lie to the EDAC core, in general telling that just one channel is filled. That produces some hard to understand error messages like: EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1 The location information there (row3 channel 0) is completely bogus: it has no physical meaning, and are just some random values that the driver uses to talk with the EDAC core. The error actually happened at CPU socket 0, channel 0, slot 1, but this is not reported anywhere, as the EDAC core doesn't know anything about the memory layout. So, only advanced users that know how the EDAC driver works and that tests their systems to see how DIMMs are mapped can actually benefit for such error logs. This patch series fixes the error report logic, in order to allow the EDAC to expose the memory architecture used by them to the EDAC core. So, as the EDAC core now understands how the memory is organized, it can provide an useful report: EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4) The location of the DIMM where the error happened is reported by "MC0" (cpu socket #0), at "channel:0 slot:1" location, and matches the physical location of the DIMM. There are two remaining issues not covered by this patch series: - The EDAC sysfs API will still report bogus values. So, userspace tools like edac-utils will still use the bogus data; - Add a new tracepoint-based way to get the binary information about the errors. Those are on a second series of patches (also at -next), but will probably miss the train for 3.5, due to the slow review process." Fix up trivial conflict (due to spelling correction of removed code) in drivers/edac/edac_device.c * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits) i7core: fix ranks information at the per-channel struct i5000: Fix the fatal error handling i5100_edac: Fix a warning when compiled with 32 bits i82975x_edac: Test nr_pages earlier to save a few CPU cycles e752x_edac: provide more info about how DIMMS/ranks are mapped i5000_edac: Fix the logic that retrieves memory information i5400_edac: improve debug messages to better represent the filled memory edac: Cleanup the logs for i7core and sb edac drivers edac: Initialize the dimm label with the known information edac: Remove the legacy EDAC ABI x38_edac: convert driver to use the new edac ABI tile_edac: convert driver to use the new edac ABI sb_edac: convert driver to use the new edac ABI r82600_edac: convert driver to use the new edac ABI ppc4xx_edac: convert driver to use the new edac ABI pasemi_edac: convert driver to use the new edac ABI mv64x60_edac: convert driver to use the new edac ABI mpc85xx_edac: convert driver to use the new edac ABI i82975x_edac: convert driver to use the new edac ABI i82875p_edac: convert driver to use the new edac ABI ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull arm updates from Russell King: "This contains both some fixes found when trying to get the Assabet+neponset setup as a replacement firewall with a 3c589 PCMCIA card, and a bunch of changes from Al to fix up the ARM signal handling, particularly some of the restart behaviour." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: neponset: make sure neponset_ncr_frob() is exported ARM: fix out[bwl]() arm: don't open-code ptrace_report_syscall() arm: bury unused _TIF_RESTORE_SIGMASK arm: remove unused restart trampoline arm: new way of handling ERESTART_RESTARTBLOCK arm: if we get into work_pending while returning to kernel mode, just go away arm: don't call try_to_freeze() from do_signal() arm: if there's no handler we need to restore sigmask, syscall or no syscall arm: trim _TIF_WORK_MASK, get rid of useless test and branch... arm: missing checks of __get_user()/__put_user() return values
-
Linus Torvalds authored
Merge patches through Andrew Morton: "180 patches - err 181 - listed below: - most of MM. I held back the (large) "memcg: add hugetlb extension" series because a bunfight has recently broken out. - leds. After this, Bryan Wu will be handling drivers/leds/ - backlight - lib/ - rtc" * emailed from Andrew Morton <akpm@linux-foundation.org>: (181 patches) drivers/rtc/rtc-s3c.c: fix compiler warning drivers/rtc/rtc-tegra.c: clean up probe/remove routines drivers/rtc/rtc-pl031.c: remove RTC timer interrupt handling drivers/rtc/rtc-lpc32xx.c: add device tree support drivers/rtc/rtc-m41t93.c: don't let get_time() reset M41T93_FLAG_OF rtc: ds1307: add trickle charger support rtc: ds1307: remove superfluous initialization rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC drivers/rtc/Kconfig: place RTC_DRV_IMXDI and RTC_MXC under "on-CPU RTC drivers" drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl feature rtc: add ioctl to get/clear battery low voltage status drivers/rtc/rtc-ep93xx.c: convert to use module_platform_driver() rtc/spear: add Device Tree probing capability lib/vsprintf.c: "%#o",0 becomes '0' instead of '00' radix-tree: fix preload vector size spinlock_debug: print kallsyms name for lock vsprintf: fix %ps on non symbols when using kallsyms lib/bitmap.c: fix documentation for scnprintf() functions lib/string_helpers.c: make arrays static lib/test-kstrtox.c: mark const init data with __initconst instead of __initdata ...
-
- 29 May, 2012 34 commits
-
-
Sachin Kamat authored
rtc-s3c.c:673:32: warning: `s3c_rtc_drv_data_array' defined but not used [-Wunused-variable] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hannu Heikkinen authored
Use the devres managed resource functions in the probe routine. Also affects the remove routine where the previously used free and release functions are not needed. The devm_* functions eliminate the need for manual resource releasing and simplify error handling. Resources allocated by devm_* are freed automatically on driver detach. Signed-off-by:
Hannu Heikkinen <ext-hannu.m.heikkinen@nokia.com> Acked-by:
Stephen Warren <swarren@wwwdotorg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rajkumar Kasirajan authored
Remove RTT interrupt handling, since PIE mode interrupts are now better emulated in generic code via an hrtimer we have no need for this, and there is no codepath in the driver that enables these periodic interrupts anyway. Signed-off-by:
Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roland Stigge authored
Adds device tree support for rtc-lpc32xx.c Signed-off-by:
Roland Stigge <stigge@antcom.de> Acked-by:
Rob Herring <rob.herring@calxeda.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nikolaus Voss authored
If the rtc reports the time might be invalid due to oscillator failure, M41T93_FLAG_OF flag must not be reset by get_time() as the read operation doesn't make the time valid. Without this patch, only the first get_time() reported an invalid time, the second get_time() reported a valid time althought the reported time is probably wrong due to oscillator failure. Instead of resetting in get_time(), with this patch M41T93_FLAG_OF is reset in set_time() when a valid time is to be written. Signed-off-by:
Nikolaus Voss <n.voss@weinmann.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfram Sang authored
Some DS13XX devices have "trickle chargers". Its configuration register is at different locations, the setup is the same, though. Since the configuration is board specific, introduce a platform_data to this driver. Tested with a DS1339 on a custom board. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfram Sang authored
ds1307 was kzalloced, so no need to zero members of the struct. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fabio Estevam authored
In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fabio Estevam authored
RTC_DRV_IMXDI and RTC_MXC are on-chip RTC modules, so move them under "on-CPU RTC drivers" selection menu. While at it change the dependency of RTC_DRV_IMXDI from ARCH_MX25 to SOC_IMX25. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Stein authored
Changes are based on arch/cris/arch-v10/drivers/pcf8563.c [akpm@linux-foundation.org: fix sparse warning] Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mikael Starvik <starvik@axis.com> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Stein authored
Currently there is no generic way to get the RTC battery status within an application. So add an ioctl to read the status bit. The idea is that the bit is set once a low voltage is detected. It stays there until it is reset using the RTC_VL_CLR ioctl. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
H Hartley Sweeten authored
Use module_platform_driver() to remove the boilerplate code. Also, change the probe and remove functions to __devinit/__devexit. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Viresh Kumar authored
SPEAr platforms now support DT and so must convert all drivers support DT. This patch adds DT probing support for rtc and updates its documentation too. Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rob Herring <robherring2@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pierre Carrier authored
number()'s behaviour is slighly changed: 0 becomes "0" instead of "00" when using the flag SPECIAL and base 8. Before: Number\Format %o %#o %x %#x 0 0 00 0 0x0 1 1 01 1 0x1 16 20 020 10 0x10 After: Number\Format %o %#o %x %#x 0 0 0 0 0x0 1 1 01 1 0x1 16 20 020 10 0x10 Signed-off-by:
Pierre Carrier <pierre@spotify.com> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Piggin authored
We are not preallocating a sufficient number of nodes. Signed-off-by:
Nick Piggin <npiggin@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
When a spinlock warning is printed we usually get BUG: spinlock bad magic on CPU#0, modprobe/111 lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0 but it's nicer to print the symbol for the lock if we have it so that we can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was. Use kallsyms to print the symbol name so we get something a bit easier to read BUG: spinlock bad magic on CPU#0, modprobe/112 lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 If the lock is not in kallsyms %ps will fall back to printing the address directly. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
Using %ps in a printk format will sometimes fail silently and print the empty string if the address passed in does not match a symbol that kallsyms knows about. But using %pS will fall back to printing the full address if kallsyms can't find the symbol. Make %ps act the same as %pS by falling back to printing the address. While we're here also make %ps print the module that a symbol comes from so that it matches what %pS already does. Take this simple function for example (in a module): static void test_printk(void) { int test; pr_info("with pS: %pS\n", &test); pr_info("with ps: %ps\n", &test); } Before this patch: with pS: 0xdff7df44 with ps: After this patch: with pS: 0xdff7df44 with ps: 0xdff7df44 Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
The code comments for bscnl_emit() and bitmap_scnlistprintf() are describing snprintf() return semantics, but these functions use scnprintf() return semantics. Fix that, and document the bitmap_scnprintf() return value as well. Cc: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Moving these arrays into static storage shrinks the kernel a bit: text data bss dec hex filename 723 112 64 899 383 lib/string_helpers.o 516 272 64 852 354 lib/string_helpers.o Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Uwe Kleine-König authored
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Metcalf authored
We were bitten by this at one point and added an additional sanity test for DEBUG_LIST. You can't validly add a list_head to a list where either prev or next is the same as the thing you're adding. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johan Hovold authored
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Stein authored
When issuing the following command: for I in 0 1 2 3 4 5 6 7; do echo 0 > /sys/class/leds/pca955x\:${I}/brightness; done It is possible that all the pca955x_read_ls calls are done sequentially before any pca955x_write_ls call is done. This updates the LS only to the last LED update in its set. Fix this by using a global lock for the pca995x device during pca955x_led_work. Also used a struct for shared data betreen all LEDs. [akpm@linux-foundation.org: revert unintentional rename of pca955x_ledsel()] Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shuah Khan authored
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by:
Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Holler authored
A halted kernel should not show a heartbeat. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
For better code readability, ALS code is moved to new a function - lm3530_als_configure() Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kim, Milo authored
max brightness is 127, so the range of brt_val should be from 0 to 127 Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shuah Khan authored
Change existing timer trigger to use the new ->activated flag to set activate successful status in activate routine and check it in deactivate routine to do cleanup. Signed-off-by:
Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shuah Khan authored
Change existing triggers backlight, gpio, and heartbeat to use the new ->activated flag to set activate successful status in their activate routines and check it in their deactivate routines to do cleanup. Signed-off-by:
Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shuah Khan authored
Add a new field to led_classdev to save activattion state after activate routine is successful. This saved state is used in deactivate routine to do cleanup such as removing device files, and free memory allocated during activation. Currently trigger_data not being null is used for this purpose. Existing triggers will need changes to use this new field. Signed-off-by:
Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Meyer authored
The advantage of kcalloc is that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Shuah Khan authored
led-class.c and ledtrig-timer.c still use simple_strtoul(). Change them to use kstrtoul() instead of obsolete simple_strtoul(). Also fix the existing int ret declaration to be ssize_t to match the return type for _store functions in ledtrig-timer.c. Signed-off-by:
Shuah Khan <shuahkhan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Dajun Chen authored
LED Driver for Dialog Semiconductor DA9052/53 PMICs. [akpm@linux-foundation.org: make led_reg static] Signed-off-by:
David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Ashish Jangam <ashish.jangam@kpitcummins.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
Gcc 4.6.2 complains that: drivers/leds/leds-lp5521.c: In function `lp5521_load_program': drivers/leds/leds-lp5521.c:214:21: warning: `mode' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c: In function `lp5521_probe': drivers/leds/leds-lp5521.c:788:5: warning: `buf' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c:740:6: warning: `ret' may be used uninitialized in this function [-Wuninitialized] These are real problems if lp5521_read() returns an error. When that happens we should handle it, instead of ignoring it or doing a bitwise OR with all the other error codes and continuing. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Milo <Milo.Kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-