- 21 Nov, 2023 25 commits
-
-
Petr Machata authored
PGT, a port-group table is an in-HW block of specialized memory that holds sets of ports. Allocated within the PGT are series of flood tables that describe to which ports traffic of various types (unknown UC, BC, MC) should be flooded from which FID. The hitherto-used layout of these flood tables is being replaced with a more flexible scheme, called compressed FID flooding (CFF). CFF can be configured through CONFIG_PROFILE.flood_mode. cff_support determines whether CONFIG_PROFILE.flood_mode can be set to CFF. Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/af727d0e1095e30fa45c7e60404637cdc491aeec.1700503643.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Networking supports changing netdevice's netns and name at the same time. This allows avoiding name conflicts and having to rename the interface in multiple steps. E.g. netns1={eth0, eth1}, netns2={eth1} - we want to move netns1:eth1 to netns2 and call it eth0 there. If we can't rename "in flight" we'd need to (1) rename eth1 -> $tmp, (2) change netns, (3) rename $tmp -> eth0. To rename the underlying struct device we have to call device_rename(). The rename()'s MOVE event, however, doesn't "belong" to either the old or the new namespace. If there are conflicts on both sides it's actually impossible to issue a real MOVE (old name -> new name) without confusing user space. And Daniel reports that such confusions do in fact happen for systemd, in real life. Since we already issue explicit REMOVE and ADD events manually - suppress the MOVE event completely. Move the ADD after the rename, so that the REMOVE uses the old name, and the ADD the new one. If there is no rename this changes the picture as follows: Before: old ns | KERNEL[213.399289] remove /devices/virtual/net/eth0 (net) new ns | KERNEL[213.401302] add /devices/virtual/net/eth0 (net) new ns | KERNEL[213.401397] move /devices/virtual/net/eth0 (net) After: old ns | KERNEL[266.774257] remove /devices/virtual/net/eth0 (net) new ns | KERNEL[266.774509] add /devices/virtual/net/eth0 (net) If there is a rename and a conflict (using the exact eth0/eth1 example explained above) we get this: Before: old ns | KERNEL[224.316833] remove /devices/virtual/net/eth1 (net) new ns | KERNEL[224.318551] add /devices/virtual/net/eth1 (net) new ns | KERNEL[224.319662] move /devices/virtual/net/eth0 (net) After: old ns | KERNEL[333.033166] remove /devices/virtual/net/eth1 (net) new ns | KERNEL[333.035098] add /devices/virtual/net/eth0 (net) Note that "in flight" rename is only performed when needed. If there is no conflict for old name in the target netns - the rename will be performed separately by dev_change_name(), as if the rename was a different command, and there will still be a MOVE event for the rename: Before: old ns | KERNEL[194.416429] remove /devices/virtual/net/eth0 (net) new ns | KERNEL[194.418809] add /devices/virtual/net/eth0 (net) new ns | KERNEL[194.418869] move /devices/virtual/net/eth0 (net) new ns | KERNEL[194.420866] move /devices/virtual/net/eth1 (net) After: old ns | KERNEL[71.917520] remove /devices/virtual/net/eth0 (net) new ns | KERNEL[71.919155] add /devices/virtual/net/eth0 (net) new ns | KERNEL[71.920729] move /devices/virtual/net/eth1 (net) If deleting the MOVE event breaks some user space we should insert an explicit kobject_uevent(MOVE) after the ADD, like this: @@ -11192,6 +11192,12 @@ int __dev_change_net_namespace(struct net_device *dev, struct net *net, kobject_uevent(&dev->dev.kobj, KOBJ_ADD); netdev_adjacent_add_links(dev); + /* User space wants an explicit MOVE event, issue one unless + * dev_change_name() will get called later and issue one. + */ + if (!pat || new_name[0]) + kobject_uevent(&dev->dev.kobj, KOBJ_MOVE); + /* Adapt owner in case owning user namespace of target network * namespace is different from the original one. */ Reported-by:Daniel Gröber <dxld@darkboxed.org> Link: https://lore.kernel.org/all/20231010121003.x3yi6fihecewjy4e@House.clients.dxld.at/Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/all/20231120184140.578375-1-kuba@kernel.org/Signed-off-by:
-
Jose Ignacio Tornos Martinez authored
The device is always reset two consecutive times (ax88179_reset is called twice), one from usbnet_probe during the device binding and the other from usbnet_open. Remove the non-necessary reset during the device binding and let the reset operation from open to keep the normal behavior (tested with generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device). Reported-by:
Herb Wei <weihao.bj@ieisystem.com> Tested-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20231120121239.54504-1-jtornosm@redhat.comSigned-off-by:
-
Russell King (Oracle) authored
Use for_each_set_bit() rather than open coding the for() test_bit() loop. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/E1r4p15-00Cpxe-C7@rmk-PC.armlinux.org.ukSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Baruch Siach authored
The code to show extended descriptor is identical to normal one. Consolidate the code to remove duplication. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/a2a5c5ce9338bdea60ec71d7eeb00fe757281557.1700372381.git.baruch@tkos.co.ilSigned-off-by:
-
Baruch Siach authored
One newline per line should be enough. Reduce the verbosity of descriptors dump. Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
Zhengchao Shao authored
If failed to allocate "tags" or could not find the final upper device from start_dev's upper list in bond_verify_device_path(), only the loopback detection of the current upper device should be affected, and the system is no need to be panic. So return -ENOMEM in alb_upper_dev_walk to stop walking, print some warn information when failed to allocate memory for vlan tags in bond_verify_device_path. I also think that the following function calls netdev_walk_all_upper_dev_rcu ---->>>alb_upper_dev_walk ---------->>>bond_verify_device_path From this way, "end device" can eventually be obtained from "start device" in bond_verify_device_path, IS_ERR(tags) could be instead of IS_ERR_OR_NULL(tags) in alb_upper_dev_walk. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20231118081653.1481260-1-shaozhengchao@huawei.comSigned-off-by:
-
Shinas Rasheed authored
Add PCI Endpoint NIC support for Octeon CN10K devices. CN10K devices are part of Octeon 10 family products with similar PCI NIC characteristics. These include: - CN10KA - CNF10KA - CNF10KB - CN10KB Update supported device list in Documentation Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231117103817.2468176-1-srasheed@marvell.comSigned-off-by:
-
Lorenzo Bianconi authored
Introduce WED offloading support for boards with more than 4GB of memory. Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/1c7efdf5d384ea7af3c0209723e40b2ee0f956bf.1700239272.git.lorenzo@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== selftests: tc-testing: more updates to tdc Address the issues making tdc timeout on downstream CIs like lkp and tuxsuite. ==================== Link: https://lore.kernel.org/r/20231117171208.2066136-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Report the number of workers in use to process the test batches. Since the number is now subject to a limit, avoid users getting confused. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231117171208.2066136-7-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
In the spirit of failing early, timeout on unbounded loops that take longer than 20 ticks to complete. Such loops are to ensure that objects created are already visible so tests can proceed without any issues. If a test setup takes more than 20 ticks to see an object, there's definetely something wrong. Signed-off-by:
-
Pedro Tammela authored
Instead of listing lingering ns pinned files and delete them one by one, leverage '-all' from iproute2 to do it in a single process fork. Signed-off-by:
-
Pedro Tammela authored
When pyroute2 is available, use the native netns delete routine instead of calling iproute2 to do it. As forks are expensive with some kernel configs, minimize its usage to avoid kselftests timeouts. Signed-off-by:
-
Pedro Tammela authored
Surprisingly in kernel configs with most of the debug knobs turned on, pre-allocating the test resources makes tdc run much slower overall than when allocating resources on a per test basis. As these knobs are used in kselftests in downstream CIs, let's go back to the old way of doing things to avoid kselftests timeouts. Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202311161129.3b45ed53-oliver.sang@intel.comSigned-off-by:
-
Pedro Tammela authored
We have observed a lot of lock contention and test instability when running with >8 cores. Enough to actually make the tests run slower than with fewer cores. Cap the maximum cores of parallel tdc to 4 which showed in testing to be a reasonable number for efficiency and stability in different kernel config scenarios. Signed-off-by:
-
Jakub Kicinski authored
Louis Peens says: ==================== nfp: add flow-steering support This short series adds flow steering support for the nfp driver. The first patch adds the part to communicate with ethtool but stubs out the HW offload parts. The second patch implements the HW communication and offloads flow steering. After this series the user can now use 'ethtool -N/-n' to configure and display rx classification rules. ==================== Link: https://lore.kernel.org/r/20231117071114.10667-1-louis.peens@corigine.comSigned-off-by:
-
Yinjun Zhang authored
This is the second part to implement flow steering. Mailbox is used for the communication between driver and HW. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
-
Yinjun Zhang authored
This is the first part to implement flow steering. The communication between ethtool and driver is done. User can use following commands to display and set flows: ethtool -n <netdev> ethtool -N <netdev> flow-type ... Signed-off-by:
-
Jakub Kicinski authored
Radhey Shyam Pandey says: ==================== net: axienet: Introduce dmaengine The axiethernet driver can use the dmaengine framework to communicate with the xilinx DMAengine driver(AXIDMA, MCDMA). The inspiration behind this dmaengine adoption is to reuse the in-kernel xilinx dma engine driver[1] and remove redundant dma programming sequence[2] from the ethernet driver. This simplifies the ethernet driver and also makes it generic to be hooked to any complaint dma IP i.e AXIDMA, MCDMA without any modification. The dmaengine framework was extended for metadata API support during the axidma RFC[3] discussion. However, it still needs further enhancements to make it well suited for ethernet usecases. Comments, suggestions, thoughts to implement remaining functional features are very welcome! [1]: https://github.com/torvalds/linux/blob/master/drivers/dma/xilinx/xilinx_dma.c [2]: https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/xilinx/xilinx_axienet_main.c#L238 [3]: http://lkml.iu.edu/hypermail/linux/kernel/1804.0/00367.html [4]: https://lore.kernel.org/all/20221124102745.2620370-1-sarath.babu.naidu.gaddam@amd.com ==================== Link: https://lore.kernel.org/r/1700074613-1977070-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by:
-
Radhey Shyam Pandey authored
Add dmaengine framework to communicate with the xilinx DMAengine driver(AXIDMA). Axi ethernet driver uses separate channels for transmit and receive. Add support for these channels to handle TX and RX with skb and appropriate callbacks. Also add axi ethernet core interrupt for dmaengine framework support. The dmaengine framework was extended for metadata API support. However it still needs further enhancements to make it well suited for ethernet usecases. The ethernet features i.e ethtool set/get of DMA IP properties, ndo_poll_controller,(mentioned in TODO) are not supported and it requires follow-up discussions. dmaengine support has a dependency on xilinx_dma as it uses xilinx_vdma_channel_set_config() API to reset the DMA IP which internally reset MAC prior to accessing MDIO. Benchmark with netperf: xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t TCP_STREAM MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.02 886.69 xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t UDP_STREAM MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 65507 10.00 15851 0 830.66 212992 10.00 15851 830.66 Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1700074613-1977070-4-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by:
-
Sarath Babu Naidu Gaddam authored
The axiethernet driver has inbuilt dma programming. In order to add dmaengine support and make it's integration seamless the current axidma inbuilt programming code is put under use_dmaengine check. It also performs minor code reordering to minimize conditional use_dmaengine checks and there is no functional change. It uses "dmas" property to identify whether it should use a dmaengine framework or inbuilt axidma programming. Signed-off-by:
Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@amd.com> Signed-off-by:
-
Radhey Shyam Pandey authored
Xilinx 1G/2.5G Ethernet Subsystem provides 32-bit AXI4-Stream buses to move transmit and receive Ethernet data to and from the subsystem. These buses are designed to be used with an AXI Direct Memory Access(DMA) IP or AXI Multichannel Direct Memory Access (MCDMA) IP core, AXI4-Stream Data FIFO, or any other custom logic in any supported device. Primary high-speed DMA data movement between system memory and stream target is through the AXI4 Read Master to AXI4 memory-mapped to stream (MM2S) Master, and AXI stream to memory-mapped (S2MM) Slave to AXI4 Write Master. AXI DMA/MCDMA enables channel of data movement on both MM2S and S2MM paths in scatter/gather mode. AXI DMA has two channels where as MCDMA has 16 Tx and 16 Rx channels. To uniquely identify each channel use 'chan' suffix. Depending on the usecase AXI ethernet driver can request any combination of multichannel DMA channels using generic dmas, dma-names properties. Example: dma-names = tx_chan0, rx_chan0, tx_chan1, rx_chan1; Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1700074613-1977070-2-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by:
-
Willem de Bruijn authored
Commit 29f834aa ("net_sched: sch_fq: add 3 bands and WRR scheduling") introduces multiple traffic bands, and per-band maximum packet count. Per-band limits ensures that packets in one class cannot fill the entire qdisc and so cause DoS to the traffic in the other classes. Verify this behavior: 1. set the limit to 10 per band 2. send 20 pkts on band A: verify that 10 are queued, 10 dropped 3. send 20 pkts on band A: verify that 0 are queued, 20 dropped 4. send 20 pkts on band B: verify that 10 are queued, 10 dropped Packets must remain queued for a period to trigger this behavior. Use SO_TXTIME to store packets for 100 msec. The test reuses existing upstream test infra. The script is a fork of cmsg_time.sh. The scripts call cmsg_sender. The test extends cmsg_sender with two arguments: * '-P' SO_PRIORITY There is a subtle difference between IPv4 and IPv6 stack behavior: PF_INET/IP_TOS sets IP header bits and sk_priority PF_INET6/IPV6_TCLASS sets IP header bits BUT NOT sk_priority * '-n' num pkts Send multiple packets in quick succession. I first attempted a for loop in the script, but this is too slow in virtualized environments, causing flakiness as the 100ms timeout is reached and packets are dequeued. Also do not wait for timestamps to be queued unless timestamps are requested. Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231116203449.2627525-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Vishvambar Panth S authored
The LAN743x/PCI11xxx DMA descriptors are always 4 dwords long, but the device supports placing the descriptors in memory back to back or reserving space in between them using its DMA_DESCRIPTOR_SPACE (DSPACE) configurable hardware setting. Currently DSPACE is unnecessarily set to match the host's L1 cache line size, resulting in space reserved in between descriptors in most platforms and causing a suboptimal behavior (single PCIe Mem transaction per descriptor). By changing the setting to DSPACE=16 many descriptors can be packed in a single PCIe Mem transaction resulting in a massive performance improvement in bidirectional tests without any negative effects. Tested and verified improvements on x64 PC and several ARM platforms (typical data below) Test setup 1: x64 PC with LAN7430 ---> x64 PC iperf3 UDP bidirectional with DSPACE set to L1 CACHE Size: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID][Role] Interval Transfer Bitrate [ 5][TX-C] 0.00-10.00 sec 170 MBytes 143 Mbits/sec sender [ 5][TX-C] 0.00-10.04 sec 169 MBytes 141 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 1.02 GBytes 876 Mbits/sec sender [ 7][RX-C] 0.00-10.04 sec 1.02 GBytes 870 Mbits/sec receiver iperf3 UDP bidirectional with DSPACE set to 16 Bytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID][Role] Interval Transfer Bitrate [ 5][TX-C] 0.00-10.00 sec 1.11 GBytes 956 Mbits/sec sender [ 5][TX-C] 0.00-10.04 sec 1.11 GBytes 951 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 1.10 GBytes 948 Mbits/sec sender [ 7][RX-C] 0.00-10.04 sec 1.10 GBytes 942 Mbits/sec receiver Test setup 2 : RK3399 with LAN7430 ---> x64 PC RK3399 Spec: The SOM-RK3399 is ARM module designed and developed by FriendlyElec. Cores: 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) PCIe: PCIe x4, compatible with PCIe 2.1, Dual operation mode iperf3 UDP bidirectional with DSPACE set to L1 CACHE Size: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID][Role] Interval Transfer Bitrate [ 5][TX-C] 0.00-10.00 sec 534 MBytes 448 Mbits/sec sender [ 5][TX-C] 0.00-10.05 sec 534 MBytes 446 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 1.12 GBytes 961 Mbits/sec sender [ 7][RX-C] 0.00-10.05 sec 1.11 GBytes 946 Mbits/sec receiver iperf3 UDP bidirectional with DSPACE set to 16 Bytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID][Role] Interval Transfer Bitrate [ 5][TX-C] 0.00-10.00 sec 966 MBytes 810 Mbits/sec sender [ 5][TX-C] 0.00-10.04 sec 965 MBytes 806 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 1.11 GBytes 956 Mbits/sec sender [ 7][RX-C] 0.00-10.04 sec 1.07 GBytes 919 Mbits/sec receiver Signed-off-by:
Vishvambar Panth S <vishvambarpanth.s@microchip.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231116054350.620420-1-vishvambarpanth.s@microchip.comSigned-off-by:
-
- 19 Nov, 2023 13 commits
-
-
Lorenzo Bianconi authored
Simplify the code and use __dev_alloc_page() instead of __dev_alloc_pages() with order 0 in mtk_wed_tx_buffer_alloc routine Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roger Quadros says: =================== net: eth: am65-cpsw: add ethtool MAC stats Gets 'ethtool -S eth0 --groups eth-mac' command to work. Also set default TX channels to maximum available and does cleanup in am65_cpsw_nuss_common_open() error path. Changelog: v2: - add __iomem to *stats, to prevent sparse warning - clean up RX descriptors and free up SKB in error handling of am65_cpsw_nuss_common_open() - Re-arrange some funcitons to avoid forward declaration ==================== Signed-off-by: -
Roger Quadros authored
k3_udma_glue_enable_rx/tx_chn returns error code on failure. Bail out on error while enabling TX/RX channel. In the error path, clean up the RX descriptors and SKBs. Get rid of kmemleak_not_leak() as it seems unnecessary now. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Roger Quadros authored
am65-cpsw supports 8 TX hardware queues. Set this as default. The rationale is that some am65-cpsw devices can have up to 4 ethernet ports. If the number of TX channels have to be changed then all interfaces have to be brought down and up as the old default of 1 TX channel is too restrictive for any mqprio/taprio usage. Another reason for this change is to allow testing using kselftest:net/forwarding:ethtool_mm.sh out of the box. Signed-off-by:
-
Roger Quadros authored
Re-arrange am65_cpsw_nuss_rx_cleanup(), am65_cpsw_nuss_xmit_free() and am65_cpsw_nuss_tx_cleanup() to avoid forward declaration. No functional change. Signed-off-by:
-
Roger Quadros authored
Gets 'ethtool -S eth0 --groups eth-mac' command to work. Signed-off-by:
-
Li RongQing authored
if a PF has 256 or more VFs, ip link command will allocate an order 3 memory or more, and maybe trigger OOM due to memory fragment, the VFs needed memory size is computed in rtnl_vfinfo_size. so introduce nlmsg_new_large which calls netlink_alloc_large_skb in which vmalloc is used for large memory, to avoid the failure of allocating memory ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\ __GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0 CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE Call Trace: dump_stack+0x57/0x6a dump_header+0x4a/0x210 oom_kill_process+0xe4/0x140 out_of_memory+0x3e8/0x790 __alloc_pages_slowpath.constprop.116+0x953/0xc50 __alloc_pages_nodemask+0x2af/0x310 kmalloc_large_node+0x38/0xf0 __kmalloc_node_track_caller+0x417/0x4d0 __kmalloc_reserve.isra.61+0x2e/0x80 __alloc_skb+0x82/0x1c0 rtnl_getlink+0x24f/0x370 rtnetlink_rcv_msg+0x12c/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x355/0x4a0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ea/0x250 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f95a65a5b70 Cc: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: one by one port representors creation Michal Swiatkowski says: Currently ice supports creating port representors only for VFs. For that use case they can be created and removed in one step. This patchset is refactoring current flow to support port representor creation also for subfunctions and SIOV. In this case port representors need to be created and removed one by one. Also, they can be added and removed while other port representors are running. To achieve that we need to change the switchdev configuration flow. Three first patches are only cosmetic (renaming, removing not used code). Next few ones are preparation for new flow. The most important one is "add VF representor one by one". It fully implements new flow. New type of port representor (for subfunction) will be introduced in follow up patchset. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: reserve number of CP queues ice: adjust switchdev rebuild path ice: add VF representors one by one ice: realloc VSI stats arrays ice: set Tx topology every time new repr is added ice: allow changing SWITCHDEV_CTRL VSI queues ice: return pointer to representor ice: make representor code generic ice: remove VF pointer reference in eswitch code ice: track port representors in xarray ice: use repr instead of vf->repr ice: track q_id in representor ice: remove unused control VSI parameter ice: remove redundant max_vsi_num variable ice: rename switchdev to eswitch ==================== Link: https://lore.kernel.org/r/20231114181449.1290117-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== igc: Add support for physical + free-running timers Vinicius Costa Gomes says: The objective is to allow having functionality that depends on the physical timer (taprio and ETF offloads, for example) and vclocks operating together. The "big" missing piece is the implementation of the .getcyclesx64() function in igc, as i225/i226 have multiple timers, we use one of those timers (timer 1) as a free-running (non adjustable) timer. The complication is that only implementing .getcyclesx64() and nothing else will break synchronization when using vclocks, as reading the clock will retrieve the free-running value but timnestamps will come from the adjustable timer. The solution is to modify "in one go" the timestamping code to be able to retrieve the timestamp from the correct timer (if a socket is "phc_bound" to a vclock the timestamp will come from the free-running timer). I was debating whether or not to do the adjustments for the internal latencies for the free-running timestamps, decided to do the adjustments so the path delay when using vclocks is similar to the one when using the physical clock. One future improvement is to implement the .getcrosscycles() function. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Add support for PTP .getcyclesx64() igc: Simplify setting flags in the TX data descriptor ==================== Link: https://lore.kernel.org/r/20231114183640.1303163-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== net/sched: cls_u32: use proper refcounts In u32 we are open coding refcounts of hashtables with integers which is far from ideal. Update those with proper refcount and add a couple of tests to tdc that exercise the refcounts explicitly. ==================== Link: https://lore.kernel.org/r/20231114141856.974326-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Add tests to specifically check for the refcount interactions of hashtables created by u32. These tables should not be deleted when referenced and the flush order should respect a tree like composition. Signed-off-by:
-
Pedro Tammela authored
Proper refcounts will always warn splat when something goes wrong, be it underflow, saturation or object resurrection. As these are always a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues. Another benefit is that the refcount API self documents the code, making clear when transitions to dead are expected. For such an update we had to make minor adaptations on u32 to fit the refcount API. First we set explicitly to '1' when objects are created, then the objects are alive until a 1 -> 0 happens, which is then released appropriately. The above made clear some redundant operations in the u32 code around the root_ht handling that were removed. The root_ht is created with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2. Throughout the entire code the root_ht is an exceptional case and can never be referenced, therefore the refcnt never incremented/decremented. Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did a double decrement to free it, which is not a fit for the refcount API. Even though refcount_t is implemented using atomics, we should observe a negligible control plane impact. Signed-off-by:
-
Jakub Kicinski authored
Revert following commits: commit acec05fb ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask") commit 11d55be0 ("net: ethtool: Add a command to expose current time stamping layer") commit bb8645b0 ("netlink: specs: Introduce new netlink command to get current timestamp") commit d905f9c7 ("net: ethtool: Add a command to list available time stamping layers") commit aed5004e ("netlink: specs: Introduce new netlink command to list available time stamping layers") commit 51bdf316 ("net: Replace hwtstamp_source by timestamping layer") commit 0f7f463d ("net: Change the API of PHY default timestamp to MAC") commit 091fab12 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp") commit 152c75e1 ("net: ethtool: ts: Let the active time stamping layer be selectable") commit ee60ea6b ("netlink: specs: Introduce time stamping set command") They need more time for reviews. Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/Signed-off-by:
-
- 18 Nov, 2023 2 commits
-
-
Heiner Kallweit authored
Mirsad proposed a patch to reduce the number of spinlock lock/unlock operations and the function code size. This can be further improved because the function sets a consecutive register block. Suggested-by:
Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-updates-2023-11-13 1) Cleanup patches, leftovers from previous cycle 2) Allow sync reset flow when BF MGT interface device is present 3) Trivial ptp refactorings and improvements 4) Add local loopback counter to vport rep stats Signed-off-by:
-
