1. 19 Nov, 2013 1 commit
  2. 18 Nov, 2013 14 commits
  3. 16 Nov, 2013 5 commits
  4. 15 Nov, 2013 7 commits
    • Daniel Mack's avatar
      net: ethernet: ti/cpsw: do not crash on single-MAC machines during resume · 1e7a2e21
      Daniel Mack authored
      During resume, use for_each_slave to walk the slaves of the cpsw, and
      soft-reset each of them. This prevents oopses if there is only one
      slave configured.
      Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
      Acked-by: default avatarMugunthan V N <mugunthanvnm@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e7a2e21
    • David S. Miller's avatar
      Merge branch 'macvlan' · 82c80e9d
      David S. Miller authored
      Michal Kubecek says:
      
      ====================
      macvlan: disable LRO on lowerdev instead of a macvlan
      
      A customer of ours encountered a problem with LRO on an ixgbe network
      card. Analysis showed that it was a known conflict of forwarding and LRO
      but the forwarding was enabled in an LXC container where only a macvlan
      was, not the ethernet device itself.
      
      I believe the solution is exactly the same as what we do for "normal"
      (802.1q) VLAN devices: if dev_disable_lro() is called for such device,
      LRO is disabled on the underlying "real" device instead.
      
      v2: adapt to changes merged from net-next
      
      v3: use BUG() in macvlan_dev_real_dev() if compiled without macvlan
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82c80e9d
    • Michal Kubeček's avatar
      macvlan: disable LRO on lower device instead of macvlan · 529d0489
      Michal Kubeček authored
      A macvlan device has always LRO disabled so that calling
      dev_disable_lro() on it does nothing. If we need to disable LRO
      e.g. because
      
        - the macvlan device is inserted into a bridge
        - IPv6 forwarding is enabled for it
        - it is in a different namespace than lowerdev and IPv4
          forwarding is enabled in it
      
      we need to disable LRO on its underlying device instead (as we
      do for 802.1q VLAN devices).
      
      v2: use newly introduced netif_is_macvlan()
      Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      529d0489
    • Michal Kubeček's avatar
      macvlan: introduce macvlan_dev_real_dev() helper function · be9eac48
      Michal Kubeček authored
      Introduce helper function macvlan_dev_real_dev which returns the
      underlying device of a macvlan device, similar to vlan_dev_real_dev()
      for 802.1q VLAN devices.
      
      v2: IFF_MACVLAN flag and equivalent of is_macvlan_dev() were
      introduced in the meantime
      
      v3: do BUG() if compiled without macvlan support
      Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      be9eac48
    • Wang Weidong's avatar
      bonding: add ip checks when store ip target · f9de11a1
      Wang Weidong authored
      I met a Bug when I add ip target with the wrong ip address:
      
      echo +500.500.500.500 > /sys/class/net/bond0/bonding/arp_ip_target
      
      the wrong ip address will transfor to 245.245.245.244 and add
      to the ip target success, it is uncorrect, so I add checks to avoid
      adding wrong address.
      
      The in4_pton() will set wrong ip address to 0.0.0.0, it will return by
      the next check and will not add to ip target.
      
      v2
      According Veaceslav's opinion, simplify the code.
      
      v3
      According Veaceslav's opinion, add broadcast check and make a micro
      definition to package it.
      
      v4
      Solve the problem of the format which David point out.
      Suggested-by: default avatarVeaceslav Falico <vfalico@redhat.com>
      Suggested-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9de11a1
    • Jukka Rissanen's avatar
      6lowpan: Uncompression of traffic class field was incorrect · 1188f054
      Jukka Rissanen authored
      If priority/traffic class field in IPv6 header is set (seen when
      using ssh), the uncompression sets the TC and Flow fields incorrectly.
      
      Example:
      
      This is IPv6 header of a sent packet. Note the priority/TC (=1) in
      the first byte.
      
      00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00
      00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
      00000020: 02 1e ab ff fe 4c 52 57
      
      This gets compressed like this in the sending side
      
      00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16
      00000010: aa 2d fe 92 86 4e be c6 ....
      
      In the receiving end, the packet gets uncompressed to this
      IPv6 header
      
      00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00
      00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
      00000020: ab ff fe 4c 52 57 ec c2
      
      First four bytes are set incorrectly and we have also lost
      two bytes from destination address.
      
      The fix is to switch the case values in switch statement
      when checking the TC field.
      Signed-off-by: default avatarJukka Rissanen <jukka.rissanen@linux.intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1188f054
    • Erik Hugne's avatar
      tipc: fix dereference before check warning · 3db0a197
      Erik Hugne authored
      This fixes the following Smatch warning:
      net/tipc/link.c:2364 tipc_link_recv_fragment()
          warn: variable dereferenced before check '*head' (see line 2361)
      
      A null pointer might be passed to skb_try_coalesce if
      a malicious sender injects orphan fragments on a link.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3db0a197
  5. 14 Nov, 2013 13 commits
    • Eric Dumazet's avatar
      ipv4: fix possible seqlock deadlock · c9e90429
      Eric Dumazet authored
      ip4_datagram_connect() being called from process context,
      it should use IP_INC_STATS() instead of IP_INC_STATS_BH()
      otherwise we can deadlock on 32bit arches, or get corruptions of
      SNMP counters.
      
      Fixes: 584bdf8c ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarDave Jones <davej@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9e90429
    • Geyslan G. Bem's avatar
      net/hsr: Fix possible leak in 'hsr_get_node_status()' · 84a035f6
      Geyslan G. Bem authored
      If 'hsr_get_node_data()' returns error, going directly to 'fail' label
      doesn't free the memory pointed by 'skb_out'.
      Signed-off-by: default avatarGeyslan G. Bem <geyslan@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84a035f6
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · 8422d1f1
      David S. Miller authored
      John W. Linville says:
      
      ====================
      pull request: wireless 2013-11-14
      
      Please pull this batch of fixes intended for the 3.13 stream!
      
      Amitkumar Karwar offers a quartet of mwifiex fixes, including an
      endian fix and three fixes for invalid memory access.
      
      Avinash Patil trims the packet length value for packets received from
      an SDIO interface.
      
      Colin Ian King fixes a NULL pointer dereference in the rtlwifi
      efuse code.
      
      Dan Carpenter cleans-up an mwifiex integer underflow, a potential
      libertas oops, a memory corrupion bug in wcn36xx, and a locking issue
      also in wcn36xx.
      
      Dan Williams helps prism54 devices to avoid being misclassified as
      Ethernet devices.
      
      Felipe Pena fixes a couple of typo errors, one in rt2x00 and the
      other in rtlwifi.
      
      Janusz Dziedzic corrects a pair of DFS-related problems in ath9k.
      
      Larry Finger patches three rtlwifi drivers to correctly report signal
      strength even for an unassociated AP.
      
      Mark Cave-Ayland rewrites some endian-illiterate packet type extraction
      code in rtlwifi.
      
      Stanislaw Gruszka addresses an rt2x00 regression related to setting
      HT station WCID and AMPDU density parameters.
      
      Sujith Manoharan corrects the initvals settings for AR9485.
      
      Ujjal Roy patches an obscure bit of code in mwifiex that was using
      the wrong definition of eth_hdr when briding patches in AP mode.
      
      Wei Yongjun fixes a couple of bugs: one is a return code handling
      bug in libertas; and, the other is a locking issue in wcn36xx.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8422d1f1
    • Michael Dalton's avatar
      virtio-net: mergeable buffer size should include virtio-net header · 5061de36
      Michael Dalton authored
      Commit 2613af0e ("virtio_net: migrate mergeable rx buffers to page
      frag allocators") changed the mergeable receive buffer size from PAGE_SIZE
      to MTU-size. However, the merge buffer size does not take into account the
      size of the virtio-net header. Consequently, packets that are MTU-size
      will take two buffers intead of one (to store the virtio-net header),
      substantially decreasing the throughput of MTU-size traffic due to TCP
      window / SKB truesize effects.
      
      This commit changes the mergeable buffer size to include the virtio-net
      header. The buffer size is cacheline-aligned because skb_page_frag_refill
      will not automatically align the requested size.
      
      Benchmarks taken from an average of 5 netperf 30-second TCP_STREAM runs
      between two QEMU VMs on a single physical machine. Each VM has two VCPUs and
      vhost enabled. All VMs and vhost threads run in a single 4 CPU cgroup
      cpuset, using cgroups to ensure that other processes in the system will not
      be scheduled on the benchmark CPUs. Transmit offloads and mergeable receive
      buffers are enabled, but guest_tso4 / guest_csum are explicitly disabled to
      force MTU-sized packets on the receiver.
      
      next-net trunk before 2613af0e (PAGE_SIZE buf): 3861.08Gb/s
      net-next trunk (MTU 1500- packet uses two buf due to size bug): 4076.62Gb/s
      net-next trunk (MTU 1480- packet fits in one buf): 6301.34Gb/s
      net-next trunk w/ size fix (MTU 1500 - packet fits in one buf): 6445.44Gb/s
      Suggested-by: default avatarEric Northup <digitaleric@google.com>
      Signed-off-by: default avatarMichael Dalton <mwdalton@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5061de36
    • Chris Metcalf's avatar
      connector: improved unaligned access error fix · 1ca1a4cf
      Chris Metcalf authored
      In af3e095a, Erik Jacobsen fixed one type of unaligned access
      bug for ia64 by converting a 64-bit write to use put_unaligned().
      Unfortunately, since gcc will convert a short memset() to a series
      of appropriately-aligned stores, the problem is now visible again
      on tilegx, where the memset that zeros out proc_event is converted
      to three 64-bit stores, causing an unaligned access panic.
      
      A better fix for the original problem is to ensure that proc_event
      is aligned to 8 bytes here.  We can do that relatively easily by
      arranging to start the struct cn_msg aligned to 8 bytes and then
      offset by 4 bytes.  Doing so means that the immediately following
      proc_event structure is then correctly aligned to 8 bytes.
      
      The result is that the memset() stores are now aligned, and as an
      added benefit, we can remove the put_unaligned() calls in the code.
      Signed-off-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ca1a4cf
    • Maciej Żenczykowski's avatar
      pkt_sched: fq: change classification of control packets · 2abc2f07
      Maciej Żenczykowski authored
      Initial sch_fq implementation copied code from pfifo_fast to classify
      a packet as a high prio packet.
      
      This clashes with setups using PRIO with say 7 bands, as one of the
      band could be incorrectly (mis)classified by FQ.
      
      Packets would be queued in the 'internal' queue, and no pacing ever
      happen for this special queue.
      
      Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
      Signed-off-by: default avatarMaciej Żenczykowski <maze@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Stephen Hemminger <stephen@networkplumber.org>
      Cc: Willem de Bruijn <willemb@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2abc2f07
    • hahnjo's avatar
      alx: Reset phy speed after resume · b54629e2
      hahnjo authored
      This fixes bug 62491 (https://bugzilla.kernel.org/show_bug.cgi?id=62491).
      After resuming some users got the following error flooding the kernel log:
      alx 0000:02:00.0: invalid PHY speed/duplex: 0xffff
      Signed-off-by: default avatarJonas Hahnfeld <linux@hahnjo.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b54629e2
    • David S. Miller's avatar
      Merge branch 'genetlink' · 4fb09a87
      David S. Miller authored
      Johannes Berg says:
      
      ====================
      genetlink: reduce ops size and complexity (v2)
      
      As before - reduce the complexity and data/code size of genetlink ops
      by making them an array rather than a linked list. Most users already
      use an array thanks to genl_register_family_with_ops(), so convert the
      remaining ones allowing us to get rid of the list head in each op.
      
      Also make them const, this just makes sense at that point and the security
      people like making function pointers const as well :-)
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fb09a87
    • Johannes Berg's avatar
      genetlink: make genl_ops flags a u8 and move to end · 3f5ccd06
      Johannes Berg authored
      To save some space in the struct on 32-bit systems,
      make the flags a u8 (only 4 bits are used) and also
      move them to the end of the struct.
      
      This has no impact on 64-bit systems as alignment of
      the struct in an array uses up the space anyway.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f5ccd06
    • Johannes Berg's avatar
      genetlink: make all genl_ops users const · 4534de83
      Johannes Berg authored
      Now that genl_ops are no longer modified in place when
      registering, they can be made const. This patch was done
      mostly with spatch:
      
      @@
      identifier ops;
      @@
      +const
       struct genl_ops ops[] = {
       ...
       };
      
      (except the struct thing in net/openvswitch/datapath.c)
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4534de83
    • Johannes Berg's avatar
      genetlink: allow making ops const · f84f771d
      Johannes Berg authored
      Allow making the ops array const by not modifying the ops
      flags on registration but rather only when ops are sent
      out in the family information.
      
      No users are updated yet except for the pre_doit/post_doit
      calls in wireless (the only ones that exist now.)
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f84f771d
    • Johannes Berg's avatar
      genetlink: register family ops as array · d91824c0
      Johannes Berg authored
      Instead of using a linked list, use an array. This reduces
      the data size needed by the users of genetlink, for example
      in wireless (net/wireless/nl80211.c) on 64-bit it frees up
      over 1K of data space.
      
      Remove the attempted sending of CTRL_CMD_NEWOPS ctrl event
      since genl_ctrl_event(CTRL_CMD_NEWOPS, ...) only returns
      -EINVAL anyway, therefore no such event could ever be sent.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d91824c0
    • Johannes Berg's avatar
      genetlink: remove genl_register_ops/genl_unregister_ops · 3686ec5e
      Johannes Berg authored
      genl_register_ops() is still needed for internal registration,
      but is no longer available to users of the API.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3686ec5e